[Car Navigation] How to install the vehicle DVD navigation installation step of the vehicle DVD navigator map
[car navigation] How to install the vehicle DVD navigation installation step of the vehicle DVD navigator map
I believe that after many car owners buy the car DVD navigator from the car supplies network, they do not know how to install the navigator, how to remove the original car's DVD navigation and install a new navigator.There are also some vehicles that are very expensive because they are unfamiliar with the installation process, and even have a clever situation.So how to install the car DVD navigator correctly and properly to the car, so that you can enjoy a happy and relaxed navigation life.
When installing the car DVD navigator, you should clearly understand some basic installation precautions.First, the screen clarity of the DVD navigator that is bought is an analog screen or a digital screen, and it is clear about the convenience of the navigator electronic map upgrade and after -sales.
Finally, if you talk about the specific installation process, prepare a cross -stroke cone and a flat -headed cone, remove the shifting rod cover, unplug the cigaretteer wiring, remove the air conditioner speed switch, and fix it with a cross cone to fix it.Unscore the screws, remove the air conditioner control panel with a word cone, unplug each wire head, and use a cross cone to unscrew the fixed CD four screws, and pry down the central air outlet from the inside to the outside with a flat cone. Do not pay attention to too much attention.EssenceIn this way, you can easily remove the original car's DVD navigator, and then the owner can re -install the newly bought navigator according to the removed process to complete the installation process of the entire vehicle DVD navigator.
Map installation step
1. Download tools:
"Official Detection tools" (the physical port, Potter rate) of DVD navigator, or special GPS port testing Tool, "GPS idle port detection Tool", "GPS hardware system detection Tool".
Second, prepare a TF card.
4G card, you can only install one map;
8G card, you may install two maps;
16G card, you may install four maps;
32G card, may install multiple maps, or 4 maps, plus music, videos, etc.
3. Copy the above three software to the new TF card root directory.
Enter the navigation machine settings- "navigation path settings", point to the .exe file in the software in the software, which can be measured separately:
The physical port of the navigator, the value of the baud rate; the idle port number of the navigator;
The hardware system of the navigator, such as: operating system category, CPU type and frequency, memory, screen resolution, etc.
4. According to the situation of this machine system, select the map that is suitable for your machine.
Note: The new card is reinstalled. You should download the full version or lazy bag.Not map resources.
Fifth, decompress the downloaded map compression package, and then copy the file package to the TF card root directory.
Modify the port number and Potter rate: COM2 (if 2 is your machine port number); 4800 (if your machine's baud rate is 4800) is confession as an example.You are based on the values you actually measured.
A. Use the modifier in it
The specific steps are as follows:
The first step is to open the map folder;
The second step is to open the "Naviresfile" folder
See "naviconfig.dll" file
Open the "Port Modifier", click "Reading" in the modifier, after reading success,
Modify port formation: COM2, rate: 4800.Click the "Modification" button again, and then press the "Exit" button.
A file called "Naviconfig-New.dll" is generated in the "Naviresfile" folder.
Delete the original "naviconfig.dll" file;
The "naviconfig-new.dll" file was renamed: "naviconfig.dll"
"Port modifier" retains non -deleted.
B. Taoism: Open the "UPF_VDD.CONF" file with a notepad book (conf forming file), and the manual modification instructions are: COM2 4800
The modification file is as follows 2 data:
[COM] = com7:
[baudrate] = 9600
C. Other maps:
The modification file of "Gaode" is: "gconfig.ini.exe" file
"Intercity" modification file is: "Comm_config.txt" file
The "US Bank" modification file is: "upf_vdd.conf" file (conf format file)
Note: When modifying, you can only modify the numbers. Do not change the format of any other programming language (including: space)
6. In the main interface of the navigator, in the "navigation Path" (or navigation file address), the .exe application in the map file was guided, and then the map was activated by pressing the "GPS" button on the navigator.