1. How to use carbon Fishing rods

1. Tie line: Pay attention to prevent disconnection when the carbon fishing rod is tied. The correct method is to pull the rod of the fishing rod for 20-30 cm and then tie the main line.As soon as you get out of the position of the red rope, the main line is tied.

2. Throw the rod: Leave the main line of 1 to 2 meters when the carbon fishing rod is fishing, so that the angle of the fishing rod and the horizontal plane can be ensured when raising the rod.The angle is less than 30 and is easier to break or even break the pole.

3. Drifting: The carbon fishing rod should be protected a little when drifting. It is best to take the fishing rod back or put it on the flat ground first.At this time, not paying attention is not the second section of the broken Fish rod.

4. Raise the rod: When carbon Fish rod is lifted, it must not be too strong. Some novices often lift the rod after eating bait, so that the fishing rod is easy to break due to sudden stress, especially when the bottom is Hanging, this is the case.The rods are eight or nine, and the rods will be broken or broken.

5. Slipfish: You can't overwhelm the carbon fish rods when slipping fish. You must completely slip the fish and then copy it ashore with a copy of the net.You can break the pole slightly or fishing rod.

6. maintenance: After the carbon fishing rod is used, it should be rinsed with water with water, and then removed and stood on the pole rack. After the water is dry, put it on the front and rear and store it properly.Put in ventilation and dry places.

2. precautions for the use of carbon Fishing rods

Because carbon fish rods are conductives, if they are not used properly, they will cause personal accidents.So remind you that when you use carbon fishing rod fishing, if you encounter thunderstorms, you should collect the Fishing rods. When you are too late, you should put it down on the ground and use it after the thunderstorm.

Another thing to pay attention to using carbon fish rods is high -voltage and low voltage wires.In recent years, carbon Fishing rods have repeatedly contacted high -voltage and low -voltage lines across the country, causing casualties.Therefore, the fisherman who uses a carbon fishing rod, whether under the high -voltage or low -voltage line, do not go fishing. The fishermen should be more careful when using carbon fishing rod fishing.

In addition, when the weather is humid, the high -voltage line will discharge the surrounding air. Even if the fishing rod does not touch the high -voltage line, it may cause electric shock.

Most of the grip of the fishing rod is not insulating. Some fishing enthusiasts will put some plastic materials on the Fish rod grip, but these are not the key. It is important that the fisherman should first avoid it.There are high -voltage and low -voltage wires nearby.

1. The difference between carbon Fishing rods and glass reinforced reinforced fishery Fishing rods

1. Different materials

Carbon fishing rod refers to a fishing rod made of carbon fiber as raw materials, while glass reinforced fishing rod refers to a fishing rod made of glass fiber.

2. Different weight

The weight of the carbon fishing rod is particularly light. A 4.5 -meter carbon fishing rod is generally less than 100 grams, while the glass reinforced fisherman's rod is much more weight. A 4.5 -meter glass reinforced fishing rod can reach 150 grams or even even even 150 grams or even evenMore heavier.

3. Different toughness

In fact, the toughness of the carbon Fish rod under the same conditions is stronger than that of glass reinforced reinforced Fishing rods. For example, the glass reinforced fishey fishing rod is bent to a certain arc, and the maximum of the carbon Fish rod can be bent is often much larger than that of the glass reinforced reinforcement fishing rod.

4. Different strength

In terms of intensity, the carbon fishing rod is higher than that of glass reinforced reinforced fishery Fishing rods, but the premise is that there must be no quality problems. If inferior carbon Fishing rods are not as good as glass reinforced fibrous reinforcement Fishing rods.

5. Different conductivity

The carbon fishing rod has a strong conductivity, so thunderstorms cannot be used to fish outdoors with carbon Fishing rods. Otherwise, the fishing rod raised is purely a thunder needle, and the glass reinforced fishing rod is almost completely insulated.

6. Different prices

The price of carbon Fishing rods under the same conditions is several times or even dozens of times of glass reinforced reinforcement Fishing rods. The price of an ordinary carbon fishing rod is basically more than 100 yuan, and ordinary glass reinforced Fishing rods may only cost more than ten yuan or even a few times.Yuan.

Second, the carbon fishing rod is better or glass reinforced fishery rod

Both the carbon fishing rod and the glass reinforcement fishing rod are often used in Fishing rods, and they are both materials with better effects.However, after all, the carbon fishing rod and the glass reinforcement fishing rod are different in materials, and they are different in many aspects.The two have their own characteristics, and they cannot just say which is good, which is not good, and it needs to be determined according to the specific circumstances.

From the perspective of advantages, the advantages of glass reinforced Fishing rods are relatively durable and can be used for a long time, so if you don't want to change the fishing rod for a long time, it is better for glass reinforced fiber reinforcement Fishing rods.There is also a special situation that is raining and thunder. At this time, it is recommended to use glass reinforced Fishing rods, because glass reinforced fisherman's rod is non -conductive.

However, a very obvious disadvantage of glass reinforcement fishing rod is that it is heavier, which is much heavier than carbon fish rods of the same length, and cannot hold for a long time.Therefore, it is better to choose a carbon rod for novices who have just started learning fishing.If you are a skilled veteran, choose according to your needs and habits.

1. What is a carbon fishing rod

Carbon rod, also known as carbon fiber fishing rod, is one of the Fishing rods.Made of high -tech carbon -based material, it has conductivity and very good resistance.Compared with ordinary glass reinforced fisheries and traditional Fishing rods, the advantages are good toughness and light weight.

carbon fiber is a new type of engineering material developed in the mid -20th century and is a super mutant substance.The production technology of carbon fiber is complicated and is still protected by patents.The principle is made by the use of artificial fiber materials. Under the protection of vacuum or inert gas, it is made of 800-1000 degrees Celsius high temperature sintering and carbon.

Make a carbon fishing rod, and wrap the carbon fiber with pre -impregnated adhesives on the tapered core pole to continuously wrap it up to achieve a certain thickness. After heating and solidifying, take out the cone core pole.The Tube fishing rod parts are made.Then, the two ends of the cone -shaped Tube are processed and renovated. After the appearance, paint, and assembly, a carbon fishing rod was born.Generally, freshwater fish can be used as carbon fishing rod fishing objects, such as catfish, cattle, catfish, black fish, etc.

2. What are the advantages and disadvantages of carbon fish rods

1. Advantages: The biggest advantage of the carbon fishing rod is that the weight is lightweight. The weight of the carbon Fish rod under the same conditions is only half of the glass reinforced reinforcement and fishing rod.High strength, good elasticity, corrosion resistance and other advantages.

2. Disadvantages: The biggest disadvantage of carbon Fish rod is strong conductivity, so you must avoid the wires and thunderstorms when using carbon fish rods.The carbon fishing rod is easier to break than the glass reinforced reinforcement fishing rod.Therefore, the novice recommends a durable glass reinforcement fishing rod, and then replace it with a carbon fishing rod with good feel.

1. What kind of material is good for climbing rod?

Generally speaking, the difference between aluminum alloy Climbing stick and carbon fiber Climbing stick is mainly in weight and durability.The material of the Mountaineering stick is carbon fiber, titanium alloy, aerospace aluminum alloy, and general aluminum alloy from light to heavy.Both carbon fiber and titanium alloy are the materials that the climbing sticks of higher prices will be selected, but because the Climbing stick is a mountaineering consumable, the relatively affordable and solid and durable aluminum alloy is the mainstream of the market.Quantity and sturdy.

The material will directly affect the weight of the Climbing stick. You can choose according to your pursuit of mountaineering lightweight. If you have planning to bring abroad to Hiking in the future, it is more convenient to choose lighter.In addition to considering weight, you also need to pay attention to its maximum gravity.The solid and high -quality climbing sticks can be guaranteed to be high outside the mountain, but they will actually be much durable.Below, we will introduce the performance of aluminum alloy mountaineering sticks and carbon fiber climbing sticks from the aspects of weight, durability, price, and use environment.

2. What kind of carbon fiber and aluminum alloy Climbing stick is good

1. Weight

Aluminum alloy mountaineering rods are often heavier, while carbon fiber climbing sticks are relatively light and portable.

2. Duration

The material of aluminum alloy is tough and durable. The metal has a certain toughness and can bend, so the aluminum alloy material is stronger than the carbon fiber material.The toughness of carbon fiber is poor, so the Mountaineering stick made of this material is lacking toughness and is often easy to break from the middle.

3. price

In terms of price, aluminum alloy is cheaper than carbon fiber.

4. Use environment

The intensity of aluminum alloy climbing sticks is good, which is more suitable for the softer hillside with a larger slope.carbon fiber climbing rod has good toughness, lighter than aluminum alloy, and is more suitable for hard geology and small slope.

The above is comparison of the performance of aluminum alloy climbing sticks and carbon fiber climbing sticks. By introducing, you must understand the differences between aluminum alloy climbing rods and carbon fiber climbing rods, so choose the material of the mountaineering rod can be determined according to your preferences and usage habits.Can help everyone.

1. What is the difference between high carbon fishing rod and carbon fishing rod

1. Carbon fishing rod: Carbon Fish rod is called carbon fiber fishing rod. The so -called carbon fiber refers to carbonized fiber made of polypropylene fiber or asphalt and is made of high -temperature carbonized.It has the advantages of good toughness and light weight.

2124t30t36t40t46T, 60T, etc. The Fishing rods made of carbon cloth within 30t belong to ordinary carbon Fishing rods, and the Fishing rods made of carbon cloth more than 30t are high carbon Fishing rods.

In summary, the main materials of high carbon fish rods and carbon fish rods are carbon cloth. There are 24T, 30T, 36T, 40T, 46T, 60T, etc.30The Fishing rods made of carbon cloth within T belong to ordinary carbon Fishing rods, and30The Fishing rods made of carbon cloth above T are high -carbon Fishing rods.

Second, the low -carbon fishing rod during wild fishing is better or high carbon fishing rod

1. The advantages and disadvantages of high carbon fish rods

The higher the carbon rod contains the carbon rod, the lighter, harder, and stronger the pole, the more expensive the price, but the more crispy.Therefore, as a high -carbon fishing rod, what is pursuing a fast fish experience, it is more suitable for black pit fishing.Black pit fishing frequency is high, the fish individuals are relatively large, and there are many fishermen around them.Therefore, choosing a high carbon fishing rod during black pits can hold it for a long time, and quickly returning fish will not affect the fishermen around them.

But high carbon Fishing rods are not suitable for wild fishing.Wild fishing often runs east, the environmental conditions are complicated, and special attention needs to be paid to the use of Fishing rods.Due to its ultra -light and hard characteristics, the tip of the pole is crispy. In a complex environment in the wild, it is easy to cause the pole to break. Therefore, wild fishing is not suitable for high -carbon Fishing rods.

2. The advantages and disadvantages of low -carbon fish rods

The advantage of low -carbon fish rods is that we can catch catfish or carp.But the feel of the low -carbon fishing rod is not as good as the feel of the high carbon fishing rod.

The disadvantage of low carbon fishing rod is soft, heavy.Because the content of carbon cloth is low, the hardness and hardness of the fishing rod should be softer. It is more heavier. The Fishing rods we just used before were made of glass fiber fiber. It is characterized by strong, but it is hard. Now some low -carbon Fishing rods are just low -carbon Fishing rods.Mixed with carbon fiber cloth with glass fiber fiber.

Low -carbon fish rods rarely have broken rods when they are used normally. When we hear a broken rod, we are generally high -carbon Fishing rods. This is some of the errors in the process of materials and use.

Summarize:Suggestions when fishing: If it is for a target fish, then we can choose a suitable high -carbon fishing rod so that the feel will feel good when fishing, but when we fishing for many types of fish, we must choose to chooseA medium -carbon or low -carbon fishing rod, so that whether it is a large fish or a small body fish, it can be caught. Don't worry about the problem of Fishing rods.