sports and casual shoes maintenance method Daquan

one,Leather sneakers

sneakers made of sheep, cowhide, pork Skin and other livestock Skin are leather sneakers. They are rich in breathability and ductility, and they are also very comfortable to wear.But the disadvantage of this shoe is obvious: you cannot touch the water, are afraid of humidity, and high prices.

cleaning method:

1Then, thenUse a shoe brush to brush the dust on the upper, then dip a little shoe oil or other leather cleaner gently to gently wipe the upper. It is difficult to remove stains.If there is no leather cleaning and care agent, you can use your conditioner, you can make the shoes shine from the dim light without light.~

2Then, thenUse a toothbrush to dip the inside of the shower gel or toothpaste to remove the odor, spots and stains inside.

Note:

Wearing leather sneakers, do not wear it when it rains, and damage the shoes a lot.When cleaning, it is best not to use water. Sprinkle water and dry immediately.If you have to go out on rainy days, you can spray waterproof spray on the shoes, which can greatly extend the life of the shoes.

Second, natural fiber or synthetic fiber natural leather sports casual shoes

1. Wet the sneakers first, and then use "leather shoes Shampoo" and soft hair brush to wash stains with "leather shoes Shampoo" and dry brush.Direct irradiation.

2. Because natural leather dyed, the color may be dyed to the fiber, so you should be particularly careful when cleaning the seam position of the two.

3. cleaning of casual shoe insoles (inner bottom)

1. Basically try to avoid cleaning the insole.If there is a odor, you can remove the insoles and place it in the air circulation, and even use shoe deodorant to remove the odor.

2. If the situation is bad, rinse the insoles under the faucet and wipe it gently with a soft brush. Do not use any cleaner, otherwise the fabric fabric may fall off.

3. Dry placed in the air circulation. Do not use hot air bans or hair dryers to force the insoles with a hair dryer, otherwise the insoles may be deformed.

Fourth, sports shoes are treated immediately after rainwater

1. Use a dry cloth to completely dry the water.

2. Use dry cloth or paper to plug in the shoe in the shoe.

3. Dry placed in the air circulation

4. Do not use a hot fan or dry hair dryer to force the sports shoes with a hair dryer.

Five, suede or up fur

1. Carefully use soft hair or nylon brush to clear the dirt with adhesion upper upper according to Mao Shun.If necessary, you can dip the brush for a small amount of "suede or a fur cleaner" and then clean the upper.

2. Dry naturally after stabilizing the shoe type to avoid direct sunlight.

Six, slide leather

1. First use a clean soft cloth (best white) to dip a small amount of "leather shoes Cleaner" in leather shoe cleaner, and wipe it lightly on the upper to remove dirt.

2. Use another clean soft cloth to evenly apply the appropriate amount of "Leather Care Ointment" to the upper uniformly (just apply a layer of thinly, avoid too much weight, or wipe the excessive ointment with cloth),Plim the Skin surface.

3. If stubborn stubborn (such as oil stains), you can wet the staining part (not all sneakers) first, and then use "leather shoes Shampoo" and soft brush to clear the stains, and the soft brush is cleared.Then print it with cloth or thick paper towels to dry the shoe shape and air dry naturally to avoid direct sunlight.

Seven, natural fiber or synthetic fiber sports shoes

Wet sneakers, clean the stains with "shoes shoes Shampoo" and soft hair brush. After the water is overwhelmed, it is printed with cloth or thick paper towels. After stabilizing the shoe type, it is naturally dry, but avoid direct sunlight.

8. Artificial leather sports leisure shoes

1. Try the clean soft cloth (best white) to quickly clean the upper.

2. If the effect is not satisfactory, you can use a small amount of cleaning a small amount of cleaning agent to clean the upper.

3. If the sneakers are too dirty, you can soak the full sneakers. Use "shoes Shampoo" and soft brush to clean the stains.Dry naturally, avoid direct sunlight.

4. Use a clean soft cloth to evenly apply the appropriate amount of "leather care ointment" to the upper, and then brighten the upper.

1. Is comprehensive training shoes leisure or exercise

Comprehensive training shoes are a kind of shoe designed for fitness, training and comprehensive sports. It is characterized by lighter, soft, comfortable, non -slip, wear -resistant.Its comfortable sole and elasticity can help people better adapt to various positions during training, such as squats, lifts, sit -ups, etc.

Introduction to the difference between comprehensive training shoes and casual shoes

Comprehensive training shoes and casual shoes have different design purposes, sole structure and appearance style:

1. Different design purposes

(1) Professional sports shoes designed for training and competitions. It has the characteristics of stability, support, durability, etc., which can meet the needs of athletes in high -intensity exercise.Their design purpose is to ensure the comfort of the foot while providing necessary protection and support to reduce the risk of injury in exercise.

(2) And casual shoes pay more attention to the comfort and fashion sense of daily wear.Their design purpose is to provide a suitable dressing experience in daily life, suitable for various activities in daily life, such as shopping, walking and travel.

2. Different sole structure

(1) The soles of comprehensive training shoes are usually made of very wear -resistant rubber or other materials, which can provide good grip and stability, helping athletes to better control the body in the competition and training.The sole is often equipped with a special shock absorption design to reduce impact in exercise and prevent injuries.

(2) The soles of casual shoes focus on lightness, softness and comfort.Lightweight materials, such as EVA foam or other buffer materials, provide the softness and comfort of the feet.The soles are often equipped with non -slip design to prevent slipping on the slippery road.

3. Different appearance and style

(1) Comprehensive training shoes are usually designed as simple and practical styles, emphasizing their functionality, focusing on functional and not pursuing styles.Generally speaking, they all have a simple color matching, which will not be too fancy or attractive.This is to ensure that the shoes are not distracted, and their attention is concentrated in exercise.

(2) Leisure shoes pay more attention to fashion and appearance design. They often use bright colors and fashionable design elements to match with different clothing.Such a design can enhance the appearance of the shoes and make it a stylish decoration.

3. How to choose comprehensive training shoes and casual shoes

The previous article has simply understood the difference between comprehensive training shoes and the difference between training shoes and casual shoes. So how do you choose comprehensive training shoes and casual shoes?

If you are a athlete or need high -intensity training and competition, then comprehensive training shoes are your first choice; if you need a pair of light, soft and comfortable shoes to cope with daily life and activities, then casual shoes may be moreSuitable for you.

1. sports shoe size description

Chinese shoe numbers and several main shoe numbers in foreign countries:

1. The formulation of Chinese shoe numbers: The shoe number based on the length of the feet, one unit (code) is about 6.35mm.

2. Several representative shoe numbers in the world:

Method code: Calculated according to the inner bottom length, 1 number length is equal to 6.67mm;

British code: calculate according to the inch -length inches, 1 inch = 25.45mm;

Code: The size of the United States also takes the inch as the unit, with a length of 9.00mm;

Daily code: The Japanese size takes centimeters as the measured unit.

2. Is leather shoes the same as sneakers?

The difference is that the leather shoes will be the smaller than the sneakers. The specifics are as follows:

1Because leather shoes are formal shoes, the number of codes is definitely produced according to the standard code of most people's feet, so that when people can wear it, they can look more beautiful as a whole.

2And sneakers are used to wear during leisure, so the design will be relatively loose, so that the feet can be released well during exercise.This also determines that there is a difference in the number of sneakers and leather shoes.

3sports shoe code is generally large, which is very suitable for all kinds of people to wear.But leather shoes are not necessarily, because everyone's feet will be different, length and width thickness, etc. These must be considered. The leather shoes should be suitable for the foot.The leather shoe code is different from a few millimeters from the sneakers.Relatively speaking, it is a number.

3. precautions for the purchase of sneakers

1. Longer shoes

(1) The soles of the feet are large, and the Bone bones are exposed to more people

(2) People with sweating a lot of feet

(3) The toes are almost side by side into people

(4) People with heavy weight

(5) People who are growing or older

(6) People walking a lot

(7) The slender shoes on the design

(8) design the pointed shoe of the toe

2, Dont lengthen too much shoes

(1) The bending of the feet is small

(2) Light weight

(3) shoes with higher heels

(4) design fattened shoes

(5) design shoes with wider shoes

Furthermore, pay attention to the shoes itself, and then consider other factors:

(1) The hard, soft, thick, thin, telescopic degree of materials.

(2) The shoes themselves are low, high -top, high -heeled, and lace.

(3) Consumers' hobbies, age, habits, occupations, etc.

Usually choose sports shoes to choose shoes length (generally refers to the length of the midsole).1.5-2.0About a cm.

3When buying sneakers:

(1) Put on the socks worn when you perform this exercise or socks of the same thickness.

(2) Ten the shoelaces and adjust the tightness of the shoelaces appropriately, so you can feel whether the footability of the shoes is ideal.

(3) Buy a moderate soft insole.

(4) The weight of the shoes should be light, and the heavy person can easily make the wearer feel a sense of falling off and easy to get fatigue.

(5) Don't open your shoe mouth, otherwise you will easily fall off when you wear it and are easy to get sick.

(6) Check the rear heels of the shoes to avoid high or hard rear follow -up design.

(7) The upper and soles of the shoe are soft and easy to bend. If it is too hard, it is not easy to bend, and it is easy to fatigue.Use squatting position when trying to check whether the bending of the shoes is good.

(8) Pay attention to the height of the shoe mouth and consider the position of the ankle Bone, otherwise it is easy to rub the Skin when wearing.

(9) Check whether the heel height of the sole is higher than the forefoot part, because the human feet are used to this method, the height height should not be too high, and pay attention to whether the heels use the air cushion or texture.

(10) The seams inside the shoe should be good.

(11) Try to wear sports shoes, wearing it a few steps, it is best to alternate the weight of the whole body to each foot, check whether the toe has enough space to accommodate the feet slightly stretched due to pressure.

(12) Outdoors need to be designed in thick and consumed sole, which is not easy to slip, and indoor shoes require flat shoe soles.

(13When buying shoes,,It is best to arrange in the afternoon to avoid buying shoes in the early morning, because the feet will be smaller at that time.

(14) According to different sports purposes and venues, choose compatible sports shoes.

How about rubber foam shoes?

The rubber foam base is a paved fabric made of naturally or artificial rubber -made rubber -closing or open -hole foaming materials.Half a century ago, people used this material for a large amount of such materials for sneakers, sports shoes, tourist shoes, liberated shoes, casual shoes, etc.

The bottom of the shoe made of rubber foam is light and wear -resistant, good tearing resistance, aging resistance, corrosion resistance, and insulation.20 The low temperature of the degree will not occur. The performance of the rubber foam sole is much better than the foam plastic outsole, and the production process is simple.Use foaming materials as the sole to reduce the weight of the shoes, increase the elasticity of the sole, make it more abrasion and more comfortable to wear.

Is rubber foaming sole wear -resistant and non -slip?

The advantage of foam rubber soles is that the weight is light and soft, and the built -in foam base also has a warm function.The non -slip performance is mainly related to the pattern of the material and the sole. For example, people call itThe bottom of the "beef tendon" is poor on the snow and ice.The non -slip performance is better on the mud.The tooth -shaped bottom drainability is better. The non -slip performance on the wetland is good ,, The suction cup pattern bottom is good at ice and snow.

Comparison of rubber base, foam base and rubber foam base

The proportion of rubber bottoms is generally high (that is, unit density) is a sulfide process, but non -slip and wear -resistant is the first choice for shoe materials (except for novel composite materials). It is suitable for Outdoor shoes, running shoes, basketball shoes, etc.

The foam base is a foam process. The mainstream of the current industry is used EVA Foam, which will be lighter than other materials, but the cost is that other material properties do not have rubber bottoms. Generally, it is matched with rubber.

The rubber foam base is based on the rubber base and the foam base. It is a rubber foam function (we know, if the rubber is 1 Compare 1 If, rubber foam is generally 1 Compare 1.1 It can be done). The advantage is that it has both the high -wear resistance characteristics of the rubber and the lightness of the foam base than the traditional rubber.It is also obvious that processing operations are difficult.Generally, you can replace the rubber bottom with foaming EVA The bottom is matched with the bottom.

In simple terms, Rubber bubble bottom Good.Because the soles must first consider comfort, foaming can be successfully improved to improve the shock resistance and vibration reduction performance of the sole.

Without foaming, because of its good return of elasticity, the comfort of rubber is stronger than that of ordinary plastic, and the abrasion resistance is also stronger, but the periponum resistance is weaker.Both plastic and rubber can be foamed, and because of the continuous development of plastic technology, the boundary between rubber and plastic is not so obvious.In terms of process costs and comprehensive performance, important members of the plastic family--- Thermoplastic elastic body is increasingly low to replace rubber.

The difference between casual shoes and other sports shoes

1. There is a nail bottom at the bottom of the football shoes, and the shoe looks smaller. There is a cushion or pattern that increases friction in front of the shoe to shoot.

2. The types of sneakers are very large. Many sports have their relative shoes, but they can basically be divided into two categories. One is functional sneakers, and the other is training shoes.Then classify according to the exercise subjects. In fact, there will be many types of shoes classification because of different angles.

3. basketball shoes can be divided into power type and speed type.tennis shoes can be divided into soil and rubber shoes.running shoes can be divided into long -distance running shoes and sprint shoes.Wait, etc., the above I just say a very simple category, and a more detailed and responsible classification needs to be for each movement.Like table tennis, Badminton, football, volleyball, high, bicycle, extreme sports, etc., there will be professional sports shoes that belong to their own projects.

Compared with these categories, because of the different movement forms, the functionality of shoes is naturally different. For example, basketball shoes, which pay more attention to thermal ankle protection, start assistance, and buffer.Pay more attention to the effects of ankle protection and buffer shock absorption, while the speed type is to pay attention to starting assistance.tennis follows the support of grip and the support of shoes.running shoes focus on lightweight, breathable and wrap.

In fact, if you are interested in this aspect, you might as well study the attributes of various sports, you can better understand what protection and promotion measures have been taken in order to help the athletes of this project, so that you can better understand the functions of sports equipment.Sex and difference.

How to convert the size of casual shoes and sneakers

The shoe code is a standard unit for measuring the length and width of our human feet, but because of the race relationship, the measurement standards of all aspects of the body are different.Two measurements, and even in the same national boundary or region, different groups and different uses, such as children and sneakers, have different shoe codes.Therefore, the corresponding sports shoes standard code is different.

In addition, the style of the shoe code is also related to the style of the shoes. Some of them are casual such as sneakers. They are relatively elastic, some are dressed, and the shoe code should be just right, such as leather shoes, so when some people buy shoes, some people are buying shoes.Considering the different sizes of the shoes, many people ask how to convert leather shoes and sneakers?

First of all, the standard code of sports shoes in various countries is different, but because of the brand's interoperability, there are corresponding conversion in the size.The difference may be understood from the shoes.

Because leather shoes are tight, just holding the toe, and the design of the sneakers is different. If you usually wear leather shoes41The code is suitable, and the foot type is relatively normal. When buying sports shoes, it is recommended to buy mostly or a large one size. At the same time, refer to the different standard code of the brand sneakers. For example, some brand Converse's sulfur shoes willThe size of the shoes is large.So be cautious when buying.