How to use the correct use of simulation garries

1. It is strictly forbidden to smoke to discard the cigarette butt on artificial lawns to prevent corrosive food and beverages((Such as acid -base drinksCureContact Artificial lawn.

Second, keep neighboring Artificial lawn areas without garbage, fragments, mud, dirt and oil spill.

3. In terms of Artificial lawn paint, exercise logos are used to repair small damage in time.

Fourth, do not stop the vehicle on Artificial lawn, especially in high temperature days, or to stop the vehicle on the humid Artificial lawn for a long time, it is not conducive to Artificial lawn maintenance.

Fifth, if the Artificial lawn venue is over negative and heavy, the venue should be specially arranged to protect the grass Skin with plywood and fiber.

6. Observe the maintenance and cleaning procedures of artificial lawns, keep the Artificial lawn venue clean, and clean the Artificial lawn venues when needed.

7. Ensure that there are sufficient trash cans on Artificial lawn venues for sports personnel.

8. Properly control the frequency of use of artificial lawns.

Nine, snow and snow weather should be removed in time to remove snow on the Artificial lawn venue.

X. Special arrangements should be available in Artificial lawn venues to protect artificial turf and observe the maintenance and cleaning procedures of Artificial lawn.

kindergarten Artificial lawn maintenance

1, Artificial Vork Revisive:

Within six to eight weeks after paving, we need to clean the Artificial lawn every week, sweep the gravel to ensure that the straw stems are upright and gravel. The purpose is to maintain the height of the gravel18to20Millimeter level.Snow in Yuetian immediately stepped on, and the surface of the surface was scanned before using it.Artificial lawn should be used after use3arrive6Rinse with water for a month to keep its original color, so that quartz sand can be appropriately settled, and the lawn stabilizes the lawn.

2Foreign objects in artificial lawns:

Leaf, pine needles, nuts, gum, etc. can cause tangled, spots and stains, especially before exercise.This kind of foreign body should be avoided by the damage to artificial lawns.

3, Artificial Capture Water Seepage:

It is necessary to prevent external sewage from penetrating into the lawn and rushing to foreign objects.A circle of border stones (roads) on the edge of the lawn can prevent sewage from penetrating.

4precautions for the use of Artificial lawn venues:

The Artificial lawn sports field is only used for physical education and athlete training competitions. It is not allowed to do other purposes. You must wear professional sports shoes in the field.Bringing cigarettes, fire types, bubble sugar, organic solvents, and chemicals are processed into the field.Prohibit7mmLong nail shoes run on the lawn; prohibit any motor vehicles from driving on the lawn; forbid heavy objects to be placed on the lawn for a long time; prohibit the boundaries of the edge of the Artificial lawn by intentionally;Go on.

How to maintain Artificial lawn

1. Cooling

When the summer climate is cool, the surface temperature of the Artificial lawn is relatively high. It does not absorb calories to reach the cooling effect like natural grass. After all, the Artificial lawn isPEPolyethylene material, after high temperature exposure, the Artificial lawn will add thermal effects. In such a high temperature environment, it is easy to play with the physical discomfort in the athletes and then reduce the quality and interest of the competition.Therefore, the surface temperature of the decline of Artificial lawn is an important process of summer protection. Now it will generally decrease the temperature by watering the venue. This method is currently more useful.The professional league competition will be watered to the place before the premises to reduce the surface temperature.But the spray must be uniform and not too much, just spray the scene to moist.

2. clean

Various wastes will inevitably occur in football venues. Whether it is Artificial lawn or a place where natural lawns is needed, it needs to be cleaned. If it is simply floating and dust, natural rainwater can be cleaned.However, there are also many plastic waste, paper dandruff, peel and other waste demand for finishing and cleaning.Therefore, the protection operation of football places is necessary to include regular cleaning content.

Three, drainage

summer is also a dry season, and generally the dry season will gather4-10Between the month, especially the dry season in the South China region, there are many climate, so that it has a great impact on the drainage system of the Artificial lawn. Generally, small and small rain has no significant impact on the Artificial lawn place.When the lawn is built, a drainage system is made, and there is a small drainage hole on the back of the lawn. Generally, small and medium rain will not affect the Artificial lawn. Basically, the accumulation of water in the place can basically be discharged.However, there are often heavy rainstorms in the summer, so that the rainfall of the large lawn is not so fast, so that the lawn will be swallowed by floods, rubber particles and quartz sand are washed away, resulting in severe damage to the lawn of the venue.Therefore, the summer Artificial lawn protection drainage is essential.

Four, dehumidification

We all know that the air humidity in summer is relatively large, especially in the south, and the relative humidity is often very high.PECommonly known as plastic, fiber is very simple to reproduce and reproduce algae in the environment with relatively large humidity. If the algae category will become very slippery, it will simply make the athletes fall in the movement of the movement.So how to dehumidify has become a major problem for many builders.Decar dehumidification is also an important thing for summer Artificial lawn protection!

Plating swimming mirror cleaning method

1. When there is oil on the surface of the swimming moster, choose a cleaning agent, choose neutral, clean it with your fingertips, then rinse with water, and then prevent it in a cool place.

2. When cleaning the goggles, be sure not to use organic solutions, such as alcohol, these organic solutions will cause corrosion of the lens, and the anti -fog effect of the Swimming goggles will be greatly reduced and even disappear.

How to wipe it clean

1. When wiping the swimming lens lens, do not use anything to wipe directly to avoid destroying the anti -fog film layer.When the anti -fog effect of the swimming moster is not very good, you can use the swimming mirror anti -fog agent appropriately.

2. If the gap on the edge is dirty, you can use a toothbrush to dip a little bath brush, but don't brush the lens to avoid scratching the lens.

How to save the electroplating goggles

1. After swimming, wash the swimming mirror with water, and then put it in the swimming mirror box.The advantage of this is to avoid some unexpected damage to the Swimming goggles.

2. Do not expose the Swimming goggles in the sun, or put it in high -temperature environments such as car trunk and radiator.Because the anti -fog agent of the swimmingoscopy will be damaged due to high temperature or ultraviolet rays, shortening the anti -fog life.

3. In a wet state, putting together with Swimsuits, towels and other objects for a long time will cause stains, so put in plastic Bags or small boxes after use.

What are the matters of electroplating goggles?

1. After swimming, wash the swimming mirror with water, and then put it in the swimming mirror box.The advantage of this is to avoid some unexpected damage to the Swimming goggles.

2. When cleaning the goggles, be sure not to use organic solutions, such as alcohol, these organic solutions will cause corrosion of the lens, and the anti -fog effect of the Swimming goggles will be greatly reduced or even disappear.

3. When wiping the swimming lens lens, do not use anything to wipe directly to avoid destroying the anti -fog film layer.When the anti -fog effect of the swimming moster is not very good, you can use the swimming mirror anti -fog agent appropriately.

4. It is best not to touch the lens with your fingers, so as not to leave your finger printing, or let the oil pollute the lens on your hand.Because the contact with the eyes in the swimming mirror is partially a closed space, wearing it for a long time can easily lead to hypoxia.Therefore, it is recommended to take the swimming lens for a while each time it is used to allow the eyes to replenish fresh air in time.

5. After using it for a period of time, there may be oily stains on the lens. At this time, it can be rinsed with neutral liquid detergent and water, and then dry and collects.

[Tale Belt cleaning and maintenance] How to clean the Belt care method

After use, there will be various problems after use. There are many problems, such as: the elasticity of the loose band becomes weakened, the fever is poor (spontaneous heating), cleaning, and placement.How to maintain the Belt?

Regarding the problem of loose band, this requires us to pay more attention when we wear it. First of all, we should not wear it for a long time. This will undoubtedly reduce the help of the loose band. It is also harmful to the human body for a long time.The wearing time takes it off in about 3-5 hours, and placed it flat and placed a cool place.

Many people will ask if the spontaneous heating Belt can be cleaned?This can be available, but it should be noted that do not clean it with hot water and soap. You only need to wash it with cold water each time. If you wash it with hot water, because of the heat expansion and contraction, it will make the loosening band faster.And it is also not good for spontaneous heating materials. In fact, in the process of using, pay attention to placed in a clean place, and the problem of cleaning is better to solve.

How to clean and maintain the Belt:

1. Washing water temperature below 40 C, soft, free, and not chlorine.

2. Do not bake at high temperature.

3. The cleaning time of hot moxibustion and magnets should not be too long. You can use water (or add a little detergent) gently (washing within 15 minutes).

4. Avoid light preservation.