1. What is the carbon machine equipment

The charcoal machine is the raw materials such as bamboo and wooden sawdust, Peanut shell, corn stick and other raw materialsCrushed into a granular shape within 10mm through the wood chips crusher. After drying the dryer, put it in a carbonized furnace for charcoal machine. The full set of equipment of the charcoal machine includes a pieces, a dryer, a stick maker, a charcoal furnace, conveying, and conveying.Planet and other.charcoal mechanismcharcoalIt is a kind of waste renewable energy fuel, smoke -free and non -toxic, clean and hygienic, which can be widely used in the field of home heating and barbecue food; industrial aspects can also replace coal or heavy oil -boiled steam boilers.crystal silicon and other materials; agriculture can also be used to improve ground temperature and improve the soil.

2. What is the working principle of charcoal charcoal machine

The charcoal mechanism uses some waste, such as branches, straw, straw, Peanut shell, tree trunk, cotton straw, tea seed shells, fruit shells, weeds, leaves, etc. These substances contain biomass fiber that can produce charcoal.It was crushed to a powder below 10mm by the pieces, and then dried 88 % of the water through the dryer. After the entry rod machine was put in a carbonization furnace for carbonization through high temperature and high -pressure molding, and finally transported the finished mechanism of charcoal by the conveyor.

3. How much is a charcoal machine equipment?

The price of charcoal machines should be calculated to calculate the price of a full set of equipment, including crushing machines, dryers, roders, carbonized furnaces, conveyor:

1. The price of the pieces is relatively low. Generally, the crushing machines equipped with the charcoal machine are small pieces. Generally, it is about 56,000 yuan.Select the size of the raw material.

2. The rod machine is an indispensable core component of the charcoal machine, so it cannot be saved in this regard. The price of the rod machine ranges from more than two to 20,000.

3. The dryers equipped with small charcoal machines are generally air -flow dryers. The price is similar to the stick maker. When selecting, the machine should be selected according to the quality and price of the machine.

4. High efficiency of carbonization furnaces. The use of distilled carbonization method can collect wooden gas and wood scorched oil generated during the carbonization process and return to the furnace to reduce carbonization flue gas. Due to the high production cost of carbonized furnaces, the market quotation is compared to compare the market quotation.Chaos, from 20,000 to 100,000, the specific price should be determined according to performance and product quality.

5. The conveyor is a device that connects the machine to transport raw materials and finished charcoal. The rubber transportation or spiral transportation can be used. The price of the conveyor is generally not expensive. It is about 700 yuan per meter.

In summary, the price of the full set of charcoal equipment is about 50,000 to 80,000 yuan. If you buy a full set of equipment, you generally make a discount on the basic equipment quotation, which is cheaper than buying alone.

1. Is the mechanism charcoal toxic?

Mechanism charcoal is also known as mechanical charcoal. As the name suggests, it is the charcoal made of machinery, and it is also known as the charcoal. It is a charcoal rod -shaped material squeezed by wood fragmentation. Many friends are worried that the mechanism charcoal is toxic. So is this true?

The mechanism charcoal itself is non -toxic, but it will produce toxic carbon monoxide under incomplete combustion.

In fact, whether it is mechanical charcoal or traditional charcoal, because they are the essence of carbon elements. When burning, if the space is closed, carbon monoxide may be generated because of incomplete combustion.Cause indoor personnel poisoning.

2. Will the mechanical charcoal generated carbon monoxide?

Will the mechanism produce carbon monoxide when burning? Depending on the situation:

1. If the indoor combustion mechanism is carbon, the indoor space is closed, the air does not circulate, and the oxygen is insufficient, the mechanism charcoal will produce carbon monoxide when burning.

2. For Outdoor, the mechanism charcoal is generally completely burned, which produces normal carbon dioxide. Even if there is a small amount of carbon monoxide, because it is outdoors, there is no need to worry about carbon monoxide poisoning.

3. Will the mechanism charcoal smoke?

No.

Compared with traditional charcoal, the advantages of the mechanism of charcoal are smoke -free. The content of charcoal fixing charcoal is high, about 80 %, burning without flameless, smoke -free and charcoal heads.%Or 6%, there is basically no ash after burning, it is a very useful charcoal.

1. What does black charcoal mean?

Black charcoal is a type of charcoal. It is commonly known as charcoal, also known as the earth kiln charcoal. It is a type of high -aromatization substance caused by fossil fuel and biomass under hypoxic conditions.The wood ash falling in white powder is therefore called black charcoal.

The composition of Black Carbon is affected by the thickness of the raw material, temperature increase, and burning temperature of the raw material (predecessor).The stable black charcoal is mainly based on the aromatherapy family as the skeleton, and there are also aliphed chain structures.

As a fuel, the advantages of black charcoal are flawless and low price, but there are also disadvantages such as explosive explosion, impatient burning, and smoke when burning.Health is harmful, so fewer and fewer.

Second, the source of the black carbon

Black charcoal is a carbon -containing particle with a highly aromatic structure generated by the incomplete combustion of fossil fuel and biomass. The main source of raw materials is soft broad -leaved salary charcoal. Due to the different tree species, it can be divided into tea ceremony charcoal, branches and other cheap cheap cheap.Civilian black charcoal.

Tea ceremony charcoal and branches are mainly produced in the three northeast provinces with abundant forest resources. They use beylum as raw materials, which are very particular about the firing process and selection.Wait for wood as raw materials.

3. Does black charcoal affect the environment?

The black carbon particles formed in the atmosphere of black carbon particles caused by black carbon burning, which has a certain impact on the environment. These nanometer -scale black carbon particles can not only spread with the atmosphere, cause respiratory diseases, but also can be wet and wet in the atmosphere.Enter the water body and soil environment under the action of settlement, which will affect the migration and transformation of pollutants in water and soil.

In addition, black charcoal also has a certain favorable impact on the environment. Studies have shown that the adsorption of black carbon plays an important role in the adsorption of organic pollutants in the soil, which can enhance the ability to adsorb soil on sulfidine.A strong adsorption of affinity, in the soil, has a good adsorption ability for sulfa metharomodolzol, pentahenol, etc. in the soil; in addition, the black charcoal entering the soil will have a certain interface effect with humic acid, thereby forming blackThe composite of carbon humic acid, the impact and mechanism of this complex against the migration and transformation of the environment in the environment are unknown.

1. What are the raw materials for mechanical charcoal

Mechanism charcoal, aliasing mechanism charcoal, artificial charcoal, recycled charcoal, smoke -free cleaning charcoal, is a charcoal rod -shaped material squeezed by wood squeezing materials. Internationally, it is publicly regarded as green and environmentally friendly products.The density of mechanism charcoal is close to coal, which is more than three times that of ordinary charcoal, and smokeless when burning. It is mostly used for barbecue charcoal. Industry can also be used in the production of mi -molized charcoal and steel smelting or serving as boiler supplementary fuels.

The raw materials of the mechanism of charcoal have a wide range of raw materials, and the rice shells, peanuts, cotton shells, corn cores, corn stalks, sorghum stalks, bean stalks, sawdust, wood chips, granular shells, coconut shells, and coconut shells can be used to produce mechanism charcoal., Shave, bamboo dandruff, and rice shell are relatively good production materials.

2. How can the mechanical charcoal be ignited quickly

Mechanical charcoal ignition takes a certain time. If you master the correct method, you can shorten the time. The ignition method of the mechanism of charcoal is:

1. Flexible solid fuel block

Although liquid alcohol and gasoline fire quickly, it is not safe and the cost is relatively high, and the solid fuel block is much more convenient. Generally, it can be purchased from outdoor products, barbecue restaurants or sales of charcoal.You can buy online.By fire with solid fuel blocks, pay attention to ventilation. First, smash some small pieces of mechanism charcoal, and then find some small wooden sticks to put it into a shelf, put the mechanism charcoal, and wait for the wooden blocks to be flickered after the wooden block is completely burned.

2. Blind charcoal

The fire charcoal is specially used for fire, which is particularly easy to burn, but the disadvantage is that it is large, it is easy to stain the hand, and the price is not cheap, and the practicality is not very strong.

3. Wooden block fire

Just find some pine blocks and bamboo sticks, split into small pieces and stack it, leave a little gap, then lit the wooden blocks below, and put a few mechanism charcoal.It should be noted that artificial synthetic materials such as plywood should be used to avoid harm of chemical release.

4, point charcoal stove

It is specially used to give the mechanism for charcoal and round charcoal. The carbon method is to ignite the liquefied gas.

Reminder: Don't forget to prepare a bucket of water or fire extinguisher when igniting to avoid accidents.

Third, the mechanism of charcoal and fruit charcoal is better

1. fruit charcoal

fruit charcoal is the fuel that has been burned, distilled and other processes after the logging of the log, and the common fruit charcoal on the market has apple wood and litchi wood. The advantage is that it is easy to ignite.Taste, the taste of baked is particularly fragrant.

2. Mechanical charcoal

Mechanical charcoal is a charcoal made of charcoal machine. Because the carbon content of the mechanism is high, the density is large, and it belongs to waste use. Therefore, compared with the fruit charcoal, the mechanism charcoal is higher temperature, combustion -resistant, and environmental protection.The disadvantage is that the ignition point is high, it is difficult to ignite, and it is easy to fire.

In general, these two types of charcoal have their own advantages and disadvantages. When barbecue, you can choose according to the grilled ingredients: if you bake things are vegetables, you need to brush a lot of oil, then Maigoo Xiaobian recommends that you use fruit with fruit.charcoal, because the temperature of fruit charcoal is lower, the oil droplets are not easy to get angry; if it is baked, it is recommended to use mechanism charcoal, such as roasted whole sheep, because the mechanism of charcoal is high -temperature flame -resistant, and the efficiency is higher.

1. What are the types of charcoal?

coal is often called, but in fact coal and charcoal are two substances. coal is an ancient plant buried in the ground. The solid combustible minerals have gradually formed by complex changes. Carbon is a porous substance, carbon burning and coal.The principle of formation is similar, and the substance left by the wood after decomposing the organic matter under high temperature and hypoxia.There are four main types of charcoal:

1. charcoal: It is a dark brown or black polyitic solid fuel that is residual under the condition of isolation of the air under the condition of isolation of the air.

2. Coke: Under the condition of isolation of the air, it is heated to 950-1050 C. It is finally obtained by drying, heat solution, melting, bonding, curing, contraction, etc.

3. activated carbon: It is a series of processes such as charcoal, bamboo charcoal, various fruit shells, and high -quality coal through physical and chemical methods to make raw materials crushed, sieved, catalyst activation, rinsing, drying and screening and other processes processing and manufacturingAdsorption agent.

4. Carbon black: It is a kind of light, loose and extremely thin black powder with large surface area and is a product of natural gas, heavy oil, fuel oil, etc. under the condition of insufficient air.It is a kind of non -fixed carbon.

How to make charcoal

There are three main methods for making charcoal:

1. Kiln burning method

The kiln burning method is a method of burning charcoal with charcoal kiln. It uses soil to build kiln and fills wood. Burning from the kiln door or fire door, so that the wood can be carbonized in the kiln.

2. Stemming method

Wood dry distillation is to place the wood in a dry distillation kiln. The process of heating and decomposing charcoal under the condition of isolation of the air, putting the wood in the dry distillation kiln, heating and decomposition under the conditions of isolation of the air;Wooden gas can condense wood (caramel and caramel acid; the remaining solid is charcoal.

3. Carbon mechanism charcoal method

The charcoal machine is a machine that crushes raw materials such as bamboo and wooden sawdust, Peanut shells, corn sticks to a granular shape within 10mm. After drying the dryer, put it in a charcoal furnace for carbonized machines., Two -raw material waste use for charcoal.[The process of charcoal mechanism charcoal & gt; & gt;]