[Gong Lantern] What is the palace lamp?

What is the palace lamp

The palace lantern began in the Eastern Han Dynasty and flourished in the Sui and Tang dynasties. It has a strong local characteristics. The palace lamp as the name suggests is the lamp used in the palace.It is famous for its graceful and luxurious and full court.Due to the long -term palace, in addition to lighting, it is also equipped with fine and complicated decorations to show the wealth and luxury of the emperor.The orthodox palace lamp is in star anise, hexagonal, and four -corner. The contents of the drawing screens on each side are mostly dragons and phoenixes, Fushou Yannian, auspicious Ruyi, and so on.

Palace lantern practice

Skeleton

The relatively simple shape of the paper lanterns is cube or cylindrical body. It is best to use the bending bamboo branches or bamboo Skin to form a frame.If it is not easy to find, the slender hard cardboard and the bamboo sticks for barbecue can also be lacking strong and flexible, but it is also a very good decoration in the room.

Make a lamp body

Buy a few pieces of white, red ordinary rice paper or sprinkled gold rice paper in the four treasure shops of the Wenfang, which is cut into the length and width that conforms to the lantern skeleton, and you can design the pattern on your own.Calligraphy, painting, and paper -cutting can all show their style on the small lanterns.After being good, you can also use the narrow strip paper upper and lower edges, which look more elegant, very much like ancient palace lamps.If you are not good at calligraphy and calligraphy, there is a simple way for reference.Use a piece of paper to draw the words you want on the post, and then overlap this thin paper and dark red rice paper together, and dig the handwriting with a single -edged blade.Remove the thin paper, and the hollowed handwriting appeared on the red propaganda paper.Use white rice paper to make the lamp body, the red mission paper pastes inside, the candlelight or light is mapped from the hollowed out, the effect is quite beautiful.

Make light source

If you put it indoors, you only need to light a ordinary candle in the lantern; if you want to carry it out, it is best to use a Light bulb and battery to make a simple circuit.

1. What is the distance between the Park's street lights?

The spacing of street lights is generally determined by the height of the street lights and the width of the road. Most of the Park Lights in the Park are mostly garden Lights, and the roads in the Park are relatively narrow, and they are usually curved roads. ThereforeEssence

Second, Park courtyard street light design plan

1. The design of the garden street lamp layout

According to the shape of the main roads and trees, the design of reasonable street lights can be used to fine-tune according to the lighting of the trees of S trees. The light pole can be designed at about 3-4m high, and the distance from the road is 30 ~ 80 cm. Depending on the specifics, the specifics are specific.The situation is determined.

2. Court -lantern style design

The Park is different from the residential area and the main roads. The style of its street lights must be taken into account the landscape characteristics of the Park. The style should be simple and generous, the color is more beautiful, and the comprehensive and beautiful aspects are considered.Common Park lamp styles are mainly multi -power street lights, Solar lawn Lights, spherical Lights, LED Solar street lights, etc. in the middle of the flower bed.

3. smart control function of street lights

The street light controller controls the street light system through the sensor and single -chip microcomputer to achieve intelligent street lights.

3. What are the functions of the Park's smart street lights

1. smart lighting

You can calculate the gateway light controller through edge computing gateway to achieve remote switching street lights, adjust the light distance, and control the light according to different scenes to achieve intelligent energy -saving street lights and create a light atmosphere for the Park community.

2. Environmental monitoring

The Park's smart street lights are installed with various sensors, which can monitor data in real time and upload it to the cloud platform to collect and store PM2.5, dust, noise, wind, temperature and humidity, etc., to provide reference for the improvement of the Park environment.

3. Video monitoring, public broadcasting

Through the management platform, information display can be implemented on the monitor, speakers, display and other devices installed by street lights, and provides functions such as tracing broadcasting, environmental monitoring, and publicity.

4. Public WiFi

Some Park's smart street lights are also loaded with WiFi functions, which can cover the wireless network. It can also obtain wireless coverage through the independent WIFI antenna access gateway.

5. Charging pile

Use the light rod to place a charging pile to solve the urgent need of insufficient mobile phone power when playing.

Disclaimer: The above method stems from the index of the program system or the sharing of netizens. It is for your reference only and does not represent the research perspective of this website. It proves that it is effective. Please pay attention to the authenticity and authority of the source of the content of the content.Apply to delete & gt; & gt;Correction & gt; & gt;

[Solar fence lamp] Features of Solar fence Lights of Solar Wall lights

Solar fence Lights from Solar battery components, super high highlights led Composition of lamps, lamps, etc.It is used as an electric energy to provide lighting lighting at night, and uses efficient led A kind of Outdoor lighting light design of the lighting source.

Platform Wall lamp composition

By Solar battery component (optoelectronics board), ultra -highlight led Lights (light sources), maintenance -free charging batteries, automatic control circuits, lamps, etc.It is used as an electric energy to provide lighting lighting at night, and uses efficient led A kind of Outdoor lighting light for lighting sourcesEssence

Features of Solar Wall lights

1. 1. Using Solar panels with a special microcomputer intelligent controller to convert the light energy to electrical energy without digging and pulling, easy installation, and acceptable to be environmentally friendly.

2. Micro -computer intelligent controllers are manufactured by advanced integrated circuits. The conversion efficiency is high. It has anti -charging, over -loading, automatic adjustment of charging current, polar reverse connection and output short -circuit protection functions, which greatly extend the service life of the battery. It is safe and reliable and convenient to use.

3.. Efficient maintenance of batteries, strong power storage, durable.

4. 4.. The time controller is an automatic tracking type. As the light time is automatically adjusted to turn on the lighting time with different light time in each season, and the energy -saving intelligence control is used, the street lights are automatically turned off in the middle of the night to extend the lighting time.

Principles of Solar Wall lights Working Principles

During the day, Solar light is irradiated on the Solar cell component (optoelectronics board), and the Solar cell generates DC electric meter controller to charge the charging battery. After the sun goes down in the eveningDynasties turn off the light automatically.

top ten brands of Outdoor lights & gt; & gt;

The role and specifications of the ground lamp

1. There are two points of the ground lamp. One is to provide lighting for pedestrians to avoid falling or hitting because the light under the feet is too dark.The second is to illuminate the flowers and trees on the ground to create a beautiful visual effect.

2. With the continuous improvement of the research and development technology of ground lamp products, it has a lot of color changes, and its role in Outdoor landscaping projects has become more and more.The ground lamp has become a very important member of the landscape lamp.

3. The specifications of ground Lights are generally not large. The common specifications are 10cm diameter, 16cm diameter, 20cm diameter and 25cm in diameter.The ground lamp is buried at the ground level, and the area is too big.

4. The floor light does not require very bright light. It provides hazy and beautiful light, so the power is not high. Generally, between 3W and 20W, it is commonly used. It is commonly used.

5. The color of the ground Lights was relatively monotonous in the past and cannot produce changes.But now with the improvement of technology, it has more and more colors, and it can control color changes through micro -computers to form a beautiful and beautiful scenery.Therefore, the ground Lights can be used not only on the lawn and pedestrian lanes, but also used beside the music Fountain to create a dreamy scenery with music Fountains.

How to choose a high -priced floor lamp

1. The floor lamp is installed under the ground. It is not convenient for maintenance and replacement after installation. Therefore, you must pay attention to the quality of the product when selecting the floor lamp products. Choose a durable high -quality product, otherwise it will bring a lot of inconvenience to the post -use.To repair or replace the ground Lights, it is often necessary to renovate the local ground, and the construction cost is large.

2. There are many light sources used in ground lamp products, and Solar LED floor Lights are better.The energy used by this kind of floor lamp products is the power of solar energy conversion, and the light source used is LED energy -saving lamp, which gives it a huge advantage in energy saving.In addition, the LED light source has a long service life, the economic cost is greatly reduced, and the cost performance is very high.

3. Be sure to check whether it has a qualified certificate when buying a floor lamp.Only the products that meet the production standards can obtain a qualified certificate with a certain product quality, and buying such a product can ensure performance and quality.If you do not have a qualified certificate, then there are three products.It is best to buy well -known brands, because these manufacturers' credibility is very high.

The role of ground lamps is introduced to everyone. In fact, in addition to being used in public, the floor lamp can also be used in the home courtyard.When buying ground lamp products, pay attention to quality and performance. Although the price is also an important factor, it cannot only consider the price and ignore the quality.Comprehensive cost -effective products are the best.

1. How bright the street lights in the residential area are suitable

The brightness adjustment of the community street lights is a big problem, mainly because the street lights are too bright, which will cause residents on low floors to feel dazzling, and the light pollution is more serious. If the street lights are too dark, it will affect the night travel of the community.In the accident, the thief is easy to make a crime, so how much is the street lights in the residential area?

In fact, my country has clearly stipulated the brightness standards for street lights in residential areas. According to the "Urban Road lighting design Standards", the road of community roads should be about 20-30LX, that is, people can be 5 See clearly within 10 meters.The lack of lighting in some communities is mainly due to the reduction of lighting requirements in order to save costs and electricity.In addition, when designing the street lighting, the support of the branch road is narrow and distributed between the residential buildings. The uniformity of street light lighting needs to be considered. Generally, it is recommended to use unilateral layout lamps to light up lighting.

2. Requirements for the installation specifications of community street lights

1. Light type

The width of the community roads is generally 3-5 meters. Considering the illumination factors and convenient maintenance of the community. Generally, the courtyard Lights between 2.5 and 4 meters in the community are used to light up.Personnel can quickly repair.In addition, courtyard Lights can pursue the beauty of the overall lamp according to the architectural style and environmental atmosphere of the community and beautify the community.

In addition, the shape of the street lights should also be simple and Smooth, and there should not be too many decorations. If there are large -area lawns and short flowers in the community, you can also consider using some lawn Lights.

2. Light source

Unlike the high -pressure sodium lamp commonly used in main road lighting, the main light sources used in community lighting are metal halide lamps. Gold halogen lamps with cold -colored light can create a sense of quietness, which can make the entire community feel layered and create low -floor residents for low -floors residents.A soft Outdoor environment, avoiding light pollution at night at night.

Community lighting also needs to consider vehicle factors, but the vehicles in the community are not like the vehicles on the main road, generally slow, so the pursuit of uniformity in brightness is not high.The brightness of the lamp area is relatively high, while the brightness in other places is low.

3. Light position arrangement

Due to the complexity of the roads in the community, there are many intersections, and there are many splits, the lighting of the community should have a good visual orientation, and unilaterally arrange it;Side layout.

In addition, when conducting community lighting design, we should pay attention to avoiding the impact of Outdoor lighting on the indoor environment of the residents. The lamp position should not be too close to the balcony and windows, and it should be arranged in the green Belt on the side of the road.

4. Power distribution settings

For residential communities with a small area, the lighting distribution box is generally located in the center of the community and sent electricity to the surrounding area. It is a central radiation type. The lines are not long, but there are more bits.Multiple ways to send electricity can not only solve the loss of voltage reduction, but also facilitate future pipeline maintenance, but the cost is slightly higher.

After the street light supply power distribution point is connected to the control cable, it can be controlled by the street light control network. It can also be equipped with control devices such as wireless Sanyao.

Disclaimer: The above method stems from the index of the program system or the sharing of netizens. It is for your reference only and does not represent the research perspective of this website. It proves that it is effective. Please pay attention to the authenticity and authority of the source of the content of the content.Apply to delete & gt; & gt;Correction & gt; & gt;