How to choose Outdoor Sleeping bags

1. Look at the Camping location

Ordinary Camping outings are enough to use cotton Sleeping bags or fleece Sleeping bags. It will be better to believe in the style. All can be used as a quilt.If you want to Hiking or climbing outdoors, or even climbing in very low areas such as snow mountains, you should choose a down sleeping bag, and the quality of the down must be good.

2. Look at the material of Sleeping bags

The surface material of the sleeping bag should be selected as much as possible with windproof, waterproof and breathable fabrics.sleeping bag filling materials can be selected according to their own needs. Generally, the fabrics such as down, goose down, seven -hole cotton, nine -pore cotton, and P cotton are very good.If your Camping place, the minimum temperature at night is below 5 degrees, it is not recommended to choose a cotton sleeping bag, otherwise there may be life danger.

3. Look at the temperature label

The temperature labels of Outdoor Sleeping bags are generally composed of the three data of the minimum temperature, comfort temperature, and the highest temperature. The minimum temperature indicates the most limit temperature used in the sleeping bag, indicating that the use of Sleeping bags at this temperature will not be frozen to death, and it cannot guarantee whether to fall asleep.Pay attention to the minimum temperature standard in outdoor activities, which can cause life to danger lower than the use of temperature.Comfort temperature refers to the most comfortable ideal temperature of using the sleeping bag, and the maximum temperature refers to the upper limit of the temperature usage range of the sleeping bag.

4. Look at the style

The common styles of Sleeping bags are mummy, semi -long Square, and envelope. Mummy has better windproofing and good warmth.While saving volume and weight, half -length squares take into account the requirements of sleep comfort.The sealing is generally used in wild Camping under warm conditions. Its comfort is better, but the warmth is poor.

5. Look at the brand

The quality of the product of large brands is often guaranteed, after -sales service is good, the production process technology is mature, the price is also reasonable, and the national supervision is also strict. Consumers can buy appropriate Outdoor sleeping bag products according to their actual needs.

What are the misunderstandings to buy a sleeping bag

1. Don't believe too much about the temperature label

Temperature standards are just a relative concept. It will change due to the changes in the environment and people. For example, fat people are better than thin, men are more cold -resistant than Asians.And when many manufacturers label the temperature, the base does not identify at the real temperature.Therefore, when choosing, we must pay more attention according to the actual situation.

2. Pay attention to odor

The fragrant smell is not necessarily good. Do nt forget to buy this when you buy a sleeping bag. Hearing the smell of Sleeping bags. If you feel pungent, strange (including aroma), it is recommended that you give up buying.This type of sleeping bag is either there is a problem in printing and dyeing or a problem with filling.

3. Pay attention to the color

Do not choose too bright Sleeping bags. Considering the unsafe factors in the fabric printing and dyeing, it is recommended to choose a white or light monochrome lining sleeping bag to avoid some unnecessary pollution.

Disclaimer: The above method stems from the index of the program system or the sharing of netizens. It is for your reference only and does not represent the research perspective of this website. It proves that it is valid. Please pay attention to the authenticity and authority of the source of the content of the content.Apply to delete & gt; & gt; error correction & gt; & gt;

How to use the Swimming ring

1. Remove the white rotation before inflating. After the gas is filled, make sure that the rotor is correct and completely inserted. Do not dial the rotor when used.

2. When a child uses a Swimming ring, adults must take care of it.

3. When a certain time, inflatable toys expand slowly.Before continuing to play, you must ensure that it will be inflated and reach the saturation state.

4. Before playing this toy, make sure that there are no sharp things or items around or on the ground.

5. Children's swimming circle, playing together for two children is very dangerous, so they do not advocate two children to play together.

6. The inflatable Swimming ring cannot be excessive.

What are the advantages and disadvantages of the swimming circle

advantage:

1. The price is cheap, the pattern is good, and it is loved by young men and women in children.

2. When the inflatable carriers are convenient, blow the air when taking it out and play with the swimming pool.

shortcoming:

1. The first is that the weight is too light and it is difficult to throw it accurately.

2. Poor pressure resistance and easy to break.

3. It will become wet when it encounters water on the surface of the plastic surface, which is difficult to grasp.

4. Some swimming rings are three -free products.

The difference between the swimming circle and the lifebuilding circle

Swimming ring: It is a water toy with light weight, easy damage, easy leakage, poor pressure resistance, and easy explosive.The plastic surface is slippery when water is wet, and it is difficult to grasp.It can only play auxiliary or protective effect in water leisure movement, and bring to the danger of deep water in the deep water area.

Life Circle: One of the water life -saving equipment, the production process is complicated, and the requirements are stricter.The rim core material uses a closed -hole foam material, that is, the polystyrene material, wraps the glass fiber cloth outside, is also applied to three layers of phenolic resin, and then the sails are covered with several layers of paint.The life of life must have fluorescent strips for convenient rescue.

How to install an electric car sunshade

1. Prepare a wrench in advance to confirm that the electric vehicle sunshade shed is complete and non -damaged, and the accessories are not omitted.

2. Understand the hexagonal screws of the rearview mirror with a wrench, remove the two rearview mirrors, place the connecting rod of the sunshade between the rearview mirror and the electric car body, and twist the rearview mirror.

3. Insert the two sleeves in the front of the sunshade into the connector, be sure to insert it to the end, so it is very tight.

4. Pull the back of the sunshade to the rear box of the electric vehicle, and tie them on the electric car body on both sides with ropes. If you want the position of the ripkin, you can also tie it to the back of the rear box.

5. At this time, there are four elastic rods in the remaining accessories. The two thicker and rigid ones are reinforced on the top of the shed, which are connected respectively.

6. The other two long and soft elastic rods are supported by the side of the rails, which are connected separately to complete the installation.

What should I pay attention to when installing an electric vehicle sunshade

1. Be sure to reserve the expansion space, the screw spacing, which can be made according to the thickness of the board. It is too small and too large.If the spacing is too small, sometimes it will cause stress due to too tightly, causing damage; if the spacing is too large, the PC board may not be unstable.

2. The plasticizer in the PVC cushion and the chemicals in certain rubber pads will be migrated to the surface of the cushion. After contacting the PC board, the PC board will be destroyed, so it is absolutely not available.It is recommended to use the material of the cushion, the product of the Sanyangi Copycopar, silicone rubber and chlorine rubber.If there is no suitable padding, it is better not to use it, nor can it be used to destroy the pad of PC.

3. In addition to the waterproofing, the double -sided waterproof tape can also be used for the pad material between the PC board and the frame.Some double -sided tapes are damaged in the face of PC boards, so they are also selected during installation.

4. PC boards are very easy to scratch. Do not tear the protective film when installing.Before cutting, the marker must be marked and marked as much as possible on the protective film. If it must be marked directly on the plate, please use a crayon to avoid using sharp tools to contact.

1. How to make a simple sunshade

Production materials:Old sheets or any fabrics such as cotton, hemp, canvas (the size depends on the individual's need), there are 4 plastic buckets (waste coating barrels, paint barrels), 4 large nail hooks, metal double -ring fastening and special tools, cement concrete (cement concrete (Contains stone, cement, yellow sand), electric diamonds and opening drills, wooden sticks, paint, and stirring sticks.

Production steps:

1. Take two waste coating barrels, and open a round hole in the center of the bottom, the size is the same as the wooden stick diameter.

2. Place the lid of a barrel on the ground, place the well -opened barrels on it, and pour the stirred concrete into the plastic barrel. Do not pour it too full.

3. Fastly insert the wooden stick into the bottom of the plastic barrel, about 15cm deep, and ensure that the wooden stick is vertically at the bottom of the barrel.

4. Press the above steps to make another bucket into a fixed pile.

5. On both sides of the Shading cloth, the two sides of the border distance are nailed to the two sides of the two -ring buckle on both sides of the border.

6. Paint the fixed barrel pile in a good ventilation place.

7. Install a nail hook at the top of the wooden stick.

8. The ring buckle on the outside of the shade cloth is installed on the nail hook of the barrel pile.

9. There are also two nail hooks on the outer wall or on the large tree.

10. The ring buckle on the shade cloth side is installed on the hook on the wall or on the tree.

A simple sunshade is made, and it is easy to storage when it is not used.

Second, simple sunshade construction method

simpleShadingThe construction method of the shed is still very simple. You can use bamboo directly to the ground. After fixing, you can also pull the line, and then cover the film on the fixed bamboo.The effect is still very good, and it can play a certain role of Shading. Generally speaking, the method of building this is also very simple.

In fact, it is simple to buildShadingThe main thing in the shed is to have supporting parts, and of course there must be corresponding columns, as long as the corresponding columns are connected.Remind everyone that the support parts of the simple shed must be set up, otherwise it is easy to collapse.

You can build a simple Shading shed by yourself. If you do nt build it, you can also find a local professional master to help construction, or search for some video tutorials on the Internet.According to the video tutorial on the Internet one by step, it is sufficient.