What kind of sleeping bag can be divided into

1. Classification according to the material

1. Plel sleeping bag

The down sleeping bag is divided into duck down and goose down. The temperature of the goose down is slightly higher than the duck down.The down sleeping bag is relatively warm, easy to squeeze, easy to maintain the original, and the use period is long. The unfavorable factors are the high price and water absorption.

2. Cotton sleeping bag

The filling of cotton Sleeping bags is chemical cotton, which has many types. Generally, seven -hole cotton, nine -pore cotton, and P cotton are better.The cotton sleeping bag is better anti -hygroticism, and the wet cotton sleeping bag can still maintain warmth. It has the advantages of easy dryness, low price and other advantages, but its quality is compared

The down sleeping bag of the same level should be heavy, it is not easy to squeeze and loaded, it takes up the Backpack space, and the service life is shorter.

3. Plush sleeping bag

The fleece sleeping bag is sewn with Fleece, which can be used as a summer sleeping bag or a sanitary sleeping bag.It can also be used with other Sleeping bags at low temperature to enhance the warmth effect.According to time experience, a -3 -degree sleeping bag can increase the warmth effect after the fleece sleeping bag can be increased by about 5 C.Its thermostat is usually between (10 C and 25 C).

4, cotton sleeping bag

The cotton cotton sleeping bag is that the filling has two kinds of ingredients: down and cotton.It integrates the characteristics of down and cotton Sleeping bags.The back is cotton. Sleeping on it does not directly pressed to the end like a down, and the face is down to keep a better warmth than cotton.The price is also between down and cotton.However, there are not many products in this regard.

2. Classification according to styles

1. Mumini -shaped

The feet of this sleeping bag are relatively narrow, and then go up to the shoulder wider. Finally, there is a head pocket with a temperature beam above the shoulder.A suitable headp for tightening should be tightened to prevent the cold wind from blowing in.Considering that people are the most cold when they sleep, some mummy -shaped Sleeping bags are particularly thickened in the lower part, and some styles are designed with thickened foot pads.

2. Semi -long Square

While saving volume and weight, this sleeping bag takes into account the requirements of sleep comfort.Most of these Sleeping bags have head pockets.In order to obtain the effect of teaching well, its shape is generally relatively compact.

3. Envelope

Most of these Sleeping bags are used for wild Camping under warm conditions. This is because the original intention of this sleeping bag design is to maximize the requirements of people's requirements for the comfort of the wild Camping. As a result, it inevitably leads to more heat loss.This kind of sleeping bag can generally pull the zipper as a cushion, and there are generally no special head pockets.

Detail design introduction of Outdoor Sleeping bags

1. chest wall edge wall

Early Sleeping bags are rarely set on the side walls and chest walls. In use, people find that the upper mouth and the zipper will leak wind, which is not conducive to keeping warm.As a result, the chest wall and the side wall are added to the design, so that the warmth of the sleeping bag is more perfect.

Second, anti -clip lining

Regardless of the full or semi -open sleeping bag, a zipper needs to be packed, and when the sleeping bag is switched, the zipper often bits the fabric. It is very inconvenient to use. If it is not good, it will bite the fabric or break the zipper.In order to solve the contradiction of zipper bite cloth, the anti -clip lining was added.

Third, double head zipper

Early Sleeping bags are usually single -head zippers, which are opened from top to bottom. Closing from the bottom up makes the temperature in the lower part of the sleeping bag cannot be adjusted.Randomly adjust the volume of the upper and lower parts to adjust the temperature in the sleeping bag.

Fourth, single and double slice

Sleeping bags can also be divided into single -layer slices or double -layer slices. Due to the softness of double -layer slices and better warmth, the high -end Sleeping bags are generally used in double slices.

Disclaimer: The above method stems from the index of the program system or the sharing of netizens. It is for your reference only and does not represent the research perspective of this website. It proves that it is valid. Please pay attention to the authenticity and authority of the source of the content of the content.Apply to delete & gt; & gt; error correction & gt; & gt;

1. The main points of the villa sun room design

1 The floor tiles of the sun room are not flattened, the better.

When the owner planned the garden in the exclusive sun room, the floor tiles do not need to be too flat. It is best to have a little gully. This has a certain benefit for retaining soil and water. Natural geological features also adopt such a more environmentally friendly and scientific way.The corner of the roof is appropriately reduced to some planes, which is convenient for excessive water in the soil to discharge from the floor drain.In addition, it is necessary to lay a non -woven isolation layer like non -woven fabric on the board to prevent water from taking away the sediment and even the pipeline during the process of leaking.

2 What plants should be placed in the sun room should consider temperature and humidity.

When the owner of Sunshine house needs to plant some natural plants in the sun room, please pay attention to the selection of plant species that are wet and hot, because the sun room, especially the Sunshine house in Beijing, is relatively long, and the general seal of the sun room isGood performance.

3 The locker in the sun room should be kept dry.

When the owner of the sun house needs to arrange a corner in the villa Sunshine room as a locker, there must not be too many plants near that corner, otherwise you should pay attention to the moisture -proof treatment of the locker.

4 The drainage system of Sunshine room should pay attention to safety issues.

When designing the sun room, pay attention to the setting of the drainage system, especially the area of the pool should not be too large. If the water volume is large, it is prone to leakage, and it will cause harm to the safety of the building for a long time.In addition, the design of the sun room must be left with doors and windows for ventilation.

5 The window opening of the villa sun room should be combined with the climate.

If it is a hot and humid climate, the building sun room should be shaped and anti -thermal anti -heat.And if it is a temperate climate, the building sun rooms should be kept warm when the windows are opened. Items The position of the windows opens the same as the winter sun, and increase the heat radiation of the Solar.

2. How to design different functions of sun rooms is reasonable

1. design of terrace sunshine houses that can be treated

If you have a large terrace or courtyard, you can choose to design a sun room, choose a glass sunroof, and then have three -sided landing windows. Transparent glass can be fully introduced in the sun.In the space, you can place a set of sofas and place a small coffee table. During the spare time, about three or two friends or the whole family can drink tea, chat, and even play mahjong to recreate the boring time.Moreover, in such a sun room, you don't have to worry about the changes in the weather. If you really encounter a rainy day, it will be another kind of enjoyment.

2. The design of the Sunshine room of the terrace can

You can place your favorite items, it can be a simple fabric sofa, a comfortable vine chair, or a green plant in the courtyard. All factors you like can be added because this belongs to your own own.Little heaven and earth.

3. design

In addition to the Sunshine room that can be dazed and hospitable, you can also design the sun room that can be dining according to the actual needs.After designing the overall structure of the Sunshine room, you can put a table and chair in the meal, and place different types of dining tables and chairs according to the size of the space.Your best choice.

3. How to design the sun room is not afraid of the wind and sun exposure

1 As well as Sky window

For the sunroof of the sun room, many people will find it dispensable, and think that it can't play the role of ventilation and heat dissipation. It may also be leaked due to the opening of the window."Water curtain Cave".

But in fact, the existence of the sunroof has its own reasonableness.Because the hot air in the sun room is concentrated on the top, the closer the temperature below, the lower the temperature below. After the window of the day is opened, the heat will slowly rush out, and the air with a lower temperature will come in to add.The temperature of the sun room.

2 As well as Choose effective insulation material

The facades and tops of the sun room are almost all composed of transparent glass materials.Although the light is bright, it can blur the boundaries of indoor and Outdoor to the greatest extent, but once the right glass is not selected, it is comparable to summer"Steaming sauna" can't stay for a moment.Therefore, it is recommended to use high -quality tempered hollow glass here, and use it with aluminum bag plastic profiles or broken bridge aluminum (as a skeleton) for thermal insulation.

3 As well as Suntech sunscreen and heat insulation

Shading curtains are also a very practical choice. Although the heat insulation method is slightly traditional, its materials, functions and shapes are diverse. You can use Outdoor sunshade curtains, louvers, or metal rolling curtains to isolateThe radiation of ultraviolet rays reduces the indoor temperature and turns it into a pleasant space.

Many sunshade curtains on the market now have the performance of automatic adjustment of light, Shading, insulation, sound insulation, and environmentally friendly and comfortable performance, which can bring users a more free experience.

4 As well as Install water spraying system

The installation of water spraying system is to cool down the sun room, which is not only low in cost, good effect, but also to clean the dust at the top by the way. The practicality is self -evident.

5 As well as planting vine plants

If you want to prevent the calories outdoors from invading the sun room, you may wish to plant some vine plants or tall trees outside the sunroof. First, you can cover the sun, and the other can beautify the environment and bring a coolness to the indoor!The greenery is full of eyes, as if there is a feeling of being in the forest.

6 As well as Air -conditioning refrigeration

In the hot summer, in terms of cooling and refrigeration of the sun room, how can there be less heat from the summer heat?-The blessing of air conditioning.However, its energy consumption is relatively large, and it is not enough energy to save energy and environmental protection. We can use various ways to adjust the indoor temperature to provide comfort for ourselves while minimizing the cost.

Tourist orchardPlanning and design principles

1. Adapt to local conditions, appropriately suitable trees

Different fruit trees have different requirements for the environment. Therefore, the tourist orchard must choose the appropriate fruit tree varieties according to the fruit trees resources, production conditions, and seasonal characteristics of various places.

2, Scientific positioning, highlighting characteristics

According to the natural characteristics of the fruit tree production area, the use of fruit trees varieties and traditional famous brands to launch characteristic business projects to meet tourists' demand"Special" to find "strange" request.Discover the historical culture and traditional craftsmanship of fruit trees, develop natural and humanistic landscapes, combine modern agricultural technology to highlight the characteristics of characteristic fruit trees and characteristic orchard environment, and the characteristic cultural landscapes are highlighted in all directions to suitable for tourists' tourism needs.

3, Protect the environmental diversity

A good ecological environment is not only the premise and foundation of high -quality, polluting green fruit, but also whether it can attract tourists to obtain tourism income and guarantee.The tourism orchard dedicated to people not only"Mouth blessing", more importantly, "Eye Blessing".

4Pay attention to cultural construction

While following the scientific management of the fruit tree, we can take care of the orchard, so that the orchard highlights the beauty of personality.Cleverly incorporate a strong local culture, create a quaint, unique and unique atmosphere, and adopt a variety of methods to carry out fun, popular science activities and participating in the labor experience.

Tourist orchardPlanning and design content

1, Production land planning

The tourist orchard is an industry based on fruit trees resources. The focus of planning content is the land planning of fruit trees. The entire garden is divided into several regions and several communities. The community is the basic unit of planning.To determine.You can also plan the nursery, facility area, etc. as needed.The layout of roads, drainage and irrigation canal, protective forests, and management houses must be considered for the convenience of the tour.

2, Tourism and leisure attractions and green space planning

In addition to the general orchard planning, the planning and leisure sightseeing attractions and green space are also the main content. It is necessary to plan some garden sketches according to local conditions, such as pavilions, small bridges, and lotus pond fish ponds.At the same time, some leisure and entertainment venues should also be constructed to meet tourists' leisure needs such as viewing, tasting, talk, fishing, chess, barbecue, and barbecue.Planning and design according to the terrain, try to integrate the building into nature as much as possible, so that it has a natural beauty.

3Planning for non -production land

As a tourism orchard construction, non -productive plans such as transportation, service facilities and office, and living facilities should be fully considered.The planning of non -production land mainly has the following contents:

(1) Road system planning

The road planning of the tourist orchard should consider the operation road and sightseeing trail.The main road runs through the whole Park and connects to the parking lot, reception centers, orchards, and sightseeing attractions. Those who have the conditions can also be used for tourists to stroll and play mountain trails.

(2) Disarantation and irrigation system planning

Starting from the actual situation, make full use of the water source to divert water irrigation, so that water can irrigate less, water can be excreted, water, drought, and drought and flood protection. Modern tourist orchards can properly planned water -saving facilities such as spray irrigation and drip irrigation.Water canal creates more considerations for playing, there is"Xiaoqiao Flowing Water Family", "spring Water Dingling" is better.

(3) The planning of the protective forest

The growth of fruit trees requires a good ecological environment. Tourists are more eager to be casual in the landscape of the scenery, so it is essential to plan the protective forests in the orchard.The good effect of anti -freezing is also conducive to the greening and beautification of the garden.

Tourist orchardPlanning and design points

1. Season design

In the design of the picking garden, you can consider the setting of four districts, namely: spring scenic spots, summer scenic spots, autumn scenic spots, and winter scenic spots to reflect the colorful changes in the landscape of the orchard season.

(1)spring Scenic Area: Various types of flower -viewing trees can be selected together and embellishedThe landscape of "people" not only reflects the spring scenery of thousands of purple and red, but also shows the humanistic atmosphere of the orchard.

(2) Xia Scenic Area: It is advisable to choose tall trees and fruit trees, and reasonably match the location of the orchard tour node, which is reasonably matched with fruit trees with different mature periods, such as precocious apples, late maturity peaches, apricot, etc.You can also use some vine fruit trees, such as grapes, kiwi, etc., to build different forms of gallery for people to cool down, leisure and fruit;

(3) autumn Scenic Area: It mainly reflects fruit and autumn.It can be put together (such as persimmon trees) that can be placed together (such as persimmon trees), which can form a large area of plaques or colorful colors. It can also decorate the variety of fruit trees with large color differences, giving people a pleasing feeling;

(4) winter Scenic Area: It mainly shows the beauty and branches of the fruit tree, layout the varieties of different trees together, and fully show the shape of the fruit tree.

In addition, in the landscape of fruit trees, the cultivation of some fruit tree greenhouse facilities should be properly configured to extend the time of sightseeing and picking, so that the scenes of fresh fruits in the four seasons, and the scene of peach blossoms in the winter becomes a reality.

2. Category design

There are many varieties of fruit trees and different shapes. When making landscaping, we must pay attention to individual ornamental beauty, but also take into account the coordination of the group.

(1) Different fruit trees formed different trees due to their different biological characteristics.Common are vines, clusters, shrubs and trees.When planning and design, manual control should be performed according to the characteristics of different varieties to shape the tree shape.When designing the landscape, the size of the tree should be scattered and orderly. The corridor should use a hedge wall shape or the shack -shaped variety; the free leisure area and the rest area should be used.Low to high arrangement varieties.In short, it is necessary to satisfy the production of high -quality fruit, but also according to a certain art group scene to form a larger and more obvious shape of visual art.

2 (2) The size and color texture of the leaves of the leaves of the leaves are different.The color of the leaves from the green of early spring to the thick green of the summer, to the autumn red, orange, yellow, and dark green.These features must be studied in detail when making landscape design. The leaf -shaped transition must be natural and orderly. It is also necessary to consider the coordination and embellishment effect of autumn leaf color.

3 (3) flowers are the show of nature.In leisure picking orchard, the color, appearance and beauty of the flower are undoubtedly the most important landscape element.The shapes and colors of different fruit trees are different, the morphological characteristics are different, and the flowering period is different.When designing design, pay attention to the flowering period, the color is relatively large, and the flowers are similar to adjacent settings. On the contrary, the partition settings should be made; the color configuration should also pay attention toFeeling.

4) fruit trees have diverse shapes, different colors, and different sizes.The characteristics of different types of fruit trees and different types of fruit trees have their own characteristics.Round, high round, flat round, gourd types are available; red, orange, yellow, green, and purple are complete; small as pearls are as big as basketball.The strange fruits also constitute a unique orchard landscape.

3. Style design

The modeling design must not only meet the production requirements of fruit trees, but also combine with garden art, which is highly reflected in the combination of technology and art.

(1) From tree shape considerations, a variety of commonly used trees can be selected, arranged in adjacent plots to meet the production of fruit, and at the same time, it constitutes a sharp contrast landscape effect.These fruit trees are coordinated and functional, and then layout of the ecological conditions of their growth and development, one line is linearly expanded, forming a fruit tree landscape with a rhythmic sense of rhythm.

2 (2) Fully use the colorful and colorful colors and fruit colors of fruit trees through grafting, connect a variety of different cultivation varieties on a tree, increasing the scientific and ornamental value of fruit tree landscape.You can also choose fruit trees with different colors, different fruits, different fruits, different fruit shapes, and different mature periods on a tree, so that there are both flowers and fruit on a tree;Show unique ornamental effect.

3 (3) Pay attention to the three -dimensional design of the three -dimensional design of the landscape garden, combined with the shape and height difference between the trees and height differences of the trees and height differences of the trees of the Qiaohua fruit trees, dwarf fruit trees, rattan fruit trees, cluster fruit trees and herbsSpace, forming a rich contour skyline, constitutes a good visual image.

How to plan and build a sightseeing orchard

According to the basic requirements of leisure agricultural functions, it can be divided into three types: picking experience area, landscape Belt and attraction area.

1. Picking taste area

For the existing fruit trees in the garden scenic area, it can be appropriately transformed to make it have the functions of sightseeing and leisure, picking taste, and fruit sales.

2. The swimming landscape Belt

The main planning layout is on both sides of the main road of the orchard scenic area, with a wide range30About rice, you can choose excellent varieties such as peaches, Li, apricot, cherry, pomegranate, jujube and other fine varieties such as peaches, Li, apricot, cherry, pomegranate, and jujube that are suitable for local climate and soil conditions.Reasonably use different tree species and different varieties of biological characteristics, and use scientific and technological methods such as greenhouse cultivation and delayed cultivation to ensure that the orchard has flowers in the three seasons and fruit in the four seasons.This type of orchard mainly uses the ornamental function to create a beautiful environment for tourists.

3. Sightseeing orchard attractions

The small road along the Guoyuan Scenic Area radiates outward, and the orchard attractions are built according to the characteristics of one garden.The area of such attractions is not necessarily large, but it must be small and exquisite and distinctive.From the selection of varieties to tree management, we try to pursue new, strange, special, and beautiful.

Tourism orchard design skills

The principles of different regions, different geographical environments, different historical and cultural backgrounds, sightseeing orchard planning layouts are different. Generally speaking, there are several points:

1The ornamental plant is arranged outside the Park, and the landscape of the Park plays a role in beautifying the environment and integrating with the peripheral landscape.

2The layout of fruit trees in several core areas of the Park, which not only reflects the theme of the orchard, but also facilitates centralized management, reduces the cost of maintenance, and is concentrated at the same time to facilitate tourists to visit.

3In the orchard, there is "water landscape" in the orchard, which increases the aura and adds a show.You can set up an ornamental waterfall landscape along Quanxi and Pond. After opening the Park, the pump will also be used to circulate to ensure water flow.While satisfying the ornamental function, the "water system" can also provide conditions for irrigation water in the orchard.

4The garden is rich in fruit and wood varieties, and the space is located on the space.The Park combines the topographic characteristics and overall planning of Belong Garden to divide the area for each type of fruit tree.

5, Support the construction of fruit tasting, display, sales, science education centers and other supporting catering, recreation, and sanitation service facilities.

What fruit and fruit trees are planted in the orchard

fruit tree varieties are best to choose fruit trees that are suitable for soil, climatic conditions and management Levels suitable for the region; fruit trees that are excellent and easy to cultivate; high -quality trees, flower fruit ornamental fruit trees; fresh edible and market purchasesFruit trees with large differences in edible quality.Therefore, cherries, strawberries, grapes, kiwi, loquats, etc. can be considered.

What plants are there in indoor plant walls

1 , Dragon

Schilan is a proper vertical -Hanging leaf -viewing plant, and it is also one of the plants commonly used in indoor plant walls.Root meat, slender leaves, like orchids.The stolch stems born in the leaf axillary can be long and soft, both rigid and soft; the clustered leaves at the top of the stem are drooping from the edge of the basin to the outside, floating with the wind, and it looks like a crane with wings beating.Therefore, it is known as the ancient crane orchid.The main thing is that it can absorb fine particles such as dust in the air and change the air to the moist environment. It is a good helper for home purifying the air. When making indoor plant walls, it is usually used as a suspended plant landscape.

2 , Red Gold Diamond Version Green Velvet

Red Gold Diamond Green Velvet is one of the commonly used plants in indoor plant walls.Red gold diamond vine green velvet a kind of yin -born plant, its vitality is extremely strongThis is one of the guidelines for planting of indoor plant walls.It also has the function of purifying the air, and it is compared with suitable homes, office buildings, hotels, hotels and other occasions.Staying in the room, it can make the entire room generous and elegant, rich in tropical rain forest atmosphere.Its blades are wide, hand -shaped, lustering petioles, and long and thick and strong. Its leaves are thick and green, which is an excellent appreciation plant.Therefore, all the requirements of indoor plant walls can be perfectly matched with red gold diamond vines and green velvet.

3 , Luo Luo

Green Luo is a large evergreen vine plant. It is good at tropical regions to switch to rocks and trunks that grow up in rainforests.Its surrounding and prosperous gas can not only be climbed on the cylinders made of brown, placed in the foyers and hotels.flowers.In addition, it can also be cultivated in the water as a small decoration in the room.

4 , Ye Yingchun

Wild Yingchun is an evergreen shrub.It is originally produced in Yunnan and the southern garden is quite common. It is often compiled into various shapes of greenhouse potted plants in the north.

5 , Hanging bamboo plum

Hanging bamboo plums, soft stems are soft and crispy, and Portuguese ground grows vines.Because its leaves are like bamboo and leaves, they are often suspended in the potted plants and appreciate their scattered stems and leaves.

6 , Butterfly Flower

Butterfly flowers, honeyster deciduous or semi -common green shrubs.4 As well as 5 Blossoms in the moon, flowers are as large as a plate, and white as jade.board of umbrella flowers are born at the end of the branches, and the surrounding is infertile flowers developed by sepals, and the center is bisexual flower.

7 , Graphye chrysanthemum

Melon chrysanthemum Chinese is known as Chiba Lotus, with cold and cold, and it is not resistant to high temperature and frost.The whole plant is slightly hairy, the leaves are large as melon leaves, and the green light is bright; the top of the flower is raw, and the head -shaped inflorescence mostly converges into an umbrella house inflorescence.There are all colors, and there are red and white compound colors, flowers1-4 moon.

How long can the indoor plant wall live

indoor plant wall decoration can bring very good decorative effects, but plant walls need to be carefully maintained to ensure the survival rate of wall plants.Therefore, how long the indoor plant walls can live, it is mainly related to whether indoor plants will be maintained and planting.Generally speaking, the survival time of the indoor plant wall is between two or three months and half a year. If the life of the indoor plant wall survives longer, then you must pay attention to the planting knowledge of these indoor plant walls below:

1 Water

The key to plant breeding is moisture. If you want to have a longer service life of indoor plants, you must pay attention to maintaining sufficient moisture to ensure the frequency of daily watering and extend the survival rate of plants.

2 ,illumination

Although indoor plants are planted indoors, they also need good light to ensure the light of indoor plant wall plants, which is very helpful for the photosynthesis of plants.It is also very helpful for plant life.

3 ,ventilation

Choose a plant wall indoors, so you must pay attention to the good ventilation of the room, so as to ensure the most reasonable growth environment for plants, thereby extending the life of the plant wall.

How to make indoor plant walls

There are many processes on the construction of plant walls. building a plant wall is not an easy task. It is necessary to design it in conjunction with the actual environment and structure. Plant walls also need to be targeted at regional and environment in plant distribution., Water, light, and the liquidity of air, etc., scientifically and reasonably select the appropriate indoor green plant, so that it can be arranged through art arrangements to make the indoor"Icing on the cake" achieves a beautiful and comfortable effect, making the room full of vitality.

1 Simple indoor plant wall

You can buy small squares on the Internet yourself is the wooden board fixed on the wall. Of course, the shape can be placed by yourself, which can be placed according to your favorite shape.Then you can place it on it after fixing, so it looks very good.Of course, this method is very good and very simple. The material will be very cheap to buy the materials, but it is just a hand.When you choose, you can choose to make a plant wall.

2 , Framework indoor plant wall

Generally the skeleton The pattern of Flower pots.First cultivate the green plants you need with small Flower pots.Set up a supporting skeleton in front of the wall and set up a simple drip irrigation or spray irrigation system.Then place the small Flower pot in the built -in stent gap.The advantage of this indoor plant wall is that plants can be replaced at any time, and the choice of plants does not have much restriction.The disadvantage is that the construction of the stent outside the wall is more time -consuming and laborious.So everyone should pay attention to these points when choosing.

3 , Modular indoor plant wall

After cultivation, install it indoors.The advantage is that it is convenient to install and is more beautiful.However, its cultivation generally requires a special person to be responsible, and the cost is greater.Generally, families do not do such an indoor plant wall.More troubles, people are still busy now, so this is not suitable for home, suitable for large hotels and the like.So everyone should pay attention when choosing.

indoor plant wall care method

The indoor plant wall has a different set of standards from the Outdoor plant wall. The plants of the indoor plant wall have low light characteristics, and it is very easy to wither and need to be replaced regularly.At the same time, the problem of lighting and irrigation in an indoor plant wall must be considered. Therefore, the key to indoor plant walls is how to grow plants longer.Therefore, the method of indoor plant wall care method is brought below:

1 Irrigation method

The irrigation system is particularly important for indoor plant walls.The general plant walls are used in dripping irrigation, and the outlet is set on the top of the plant wall; ordinary soil cannot keep the water for a long time. ThereforeWater resources avoid waste.

2 , Growth medium

The growth medium is the growth medium of the plant wall. It has the characteristics of light weight, difficult to decompose, excellent storage capacity, strong drainage and gas exchange capacity.The growth medium of soil as the plant wall should first fully understand its habits, types, and plant root systems. These have played a decisive role in the survival of plants.