Moss micro -landscape production method
Moss Micro Landscape Production Step: Put the light stone layer
Choose the diameter of the light stone about 3 ~ 6 mm. Since the glass bottle does not have a bottom stomach, the effect of the light stone layer is as the bottom breathable water seepage layer.When the light stone is laid, it should be as flat as possible. Don't be too high. Of course, according to the composition, the light stone is best to spread two layers. First, it is large particles, and then small particles.
Moss Micro Landscape Production Step: Play Water Moss
1. The role of laying water moss is to beolate, mainly to prevent soil from being penetrated into the light stone layer due to watering or rainwater. At the same time, we can also isolate the water storage and slowly supply water to ensure that the roots are not flooded.Here we tear the water moss into a small piece and a small piece, fluttering on the light stone layer, just a thin layer.
2. After spreading, spray the water moss and wait for it to slowly swell. At this time, the water moss is flattened with your fingers.
III moss micro -landscape production step: laying planting soil
1. To raise plants, soil is the key. The appropriate pH value, good moisturizing power, and certain nutrients, thickness and softness of Chengdu are important factors affecting plant survival and growth.Therefore, you should choose a plant that is more suitable for the growth of negative plants such as moss.
2. Put the amount of soil on the water moss and make a slightly slightly high slope of the front and rear, about 8 mm in front, and about 16 mm in the back.Then spray wet planting soil, but pay attention to controlling the amount of water. Do not exceed the light stone layer.
Moss micro -landscape production steps: planting background plant
This is the step of sowing. Those who have experience can be based on their own love, free creation, and their own small production. However, if novice, it is recommended that you install the steps provided by the shop to complete.
1. First use tools and other tools to dig a small hole on the soil, set the prepared plant root, and then pinch the mules, plant it in the soil, and reasonably surrounded the soil to ensure that plant planting is safely stable.In addition, the stems and leaves of plants are recommended to the super -view port.
2. Since it is a background plant, we must plant it in the back of the picture, but we cannot plant the roots to be planted, but the stems and leaves of the plant can be stretched in the upper part.
3. All plants can be trimmed appropriately when the branches and leaves are too large and too long, but do not hurt the main stem.In the case of too long, you can also trim it moderately, or gently roll the roots to the lower end of the main stem, pinch with a mule, and plant it into the soil.
Moss micro -landscape production steps: laying moss
1. clean the moss and divide it into several parts according to the requirements of the laying of your own design.You can lay some props, such as houses, rivers, and so on. After the moss is paved, remember to spray water again so that the moss can fully swell.
2. After the moss expands, you need to gently press it with your hands, so as not to leave the edge to leave a gap.
Moss micro -landscape production steps: laying river sand
1. Powder river sand with the reserved place to create a stream and the shallow beach in front.
2. In this bonsai, in order not to affect the previous work, vine plants have also been planted at this step.
3. It has become a scene. At this step, most of them have been successful.
Moss micro -landscape production steps: Place dolls and mushrooms
We need to play freely at this step. You can put the doll in your expected position according to your own understanding, and imagine the fairy tales in the scene. There are more artistic conception and interest.
Summarize: Above we briefly introduce you how DIY has fun moss micro -landscapes. If we put a pot of our DIY moss microman landscape at home or office, when we are tired and fatigue, I can see the green color carefully designed.Let us escape complication and hustle and bustle, and walk into a natural small ecological zone.
Moss micro -landscape maintenance method
Daily maintenance method
Light: Moss is a yin -ray plant. The demand for light is not so strong. You can place the bright scattered light throughout the day in the room, or the sun will be exposed in the early morning and evening.But it should be noted that it must not be exposed to the sun at noon.
Water: Moss is a plant that absorbs moisture directly by leaf surface. When watering, moss spray the leaf surface, and other plants spray the soil surface to prevent other plants from rotten leaves.
Although moss likes humidity, too much watering will also get sick, so watering should be appropriate.Daily maintenance can be done a little bit, and don't be too damp.The natural drying and dormant moss can be restored with water permeability, but the moss that is wet for a long time is easy to damage once the temperature is not suitable.
If the leaves are stained with water on the inner wall of the glass, the two are separated, otherwise the leaves will rot and stick to the inner wall of the glass.
Temperature: Most areas in China are suitable for moss growth, and the best temperature grows between 5 C-28 C.
Soil: Although moss in the micro -landscape does not require the soil, it is still recommended to use special cultivation soil, because this soil is not easy to mold.
Ventilation: If it is a sealed glass bottle, it is recommended to open it for several hours a day to make the plants breathe and increase air circulation.
Moss disease maintenance
Black: It is usually too little watering, or the open environment is too dry. You only need to replenish the water in time.
Yellowing: There are many reasons for the yellowing of moss. Generally, the conditions of light are not suitable. The soil is not suitable for moss growth, or the air quality is not good in an open environment.
Black: Usually, because the watering of the moss is soaked in the water, it starts to become black and rot.At this time, watering should be stopped and placed in a cool vent. If there is still too much water, you should slightly tilted the landscape, and then use a paper towel or water absorption cloth to absorb excess water.
Surface mold: This situation is generally due to poor ventilation. If it is not particularly serious, it should be placed in a cool and ventilated place, spraying bacteria reagents and accepting the morning and evening sunlight for sterilization and disinfection; in severe cases, it is necessary to change soil treatment.
Special Mic 
