Commonly used on the stageilluminationLampWhat are the

1. Statium: It is one of the most widely used main lamps on stage lighting. At present, there are 1kW and 2KW in the market.The light of the light, the edge of the outline of the light spots is relatively clear, can highlight a part, and can also enlarge the light spotlight to a area. As the main light source on the stage, it is commonly used in light Levels such as surface light, slap, and side light.

2. soft light: The light is soft and well -proportioned, which can highlight a certain part without stiff light spots, which is convenient for several Lights to connect. Common ones are 0.3kW, 1kW, 2kW, etc.Mostly used for close -range light Levels such as column light and flowing light.

3. Returning light: It is a reflective lamp. It is characterized by hard light, high illuminance, and long range of range. It is an economical and efficient strong light.Wait, use the most with 2KW.

4. Scropling Lights: Lights are scattered, both are referred to, and the projection area is large. It is divided into sky -sized astigmatism and ground gitons. The common ones are 0.5kW, 1KW, 1.25kW, 2KW, etc., which are mostly used for sky curtains.The general lighting of the stage.

5. Styling light: The principle is between the chasing light and the spotlight. It is a special lamp, which is mainly used for the shape projection of characters and landscapes.

6. Foot light (also known as strip lamp): The light is soft and the area is wide.It is mainly used as a light and web, a light, and cloth color, and it can also help the surface lighting at the entrance.

7. Light lamp (also known as downlight): Currently widely used, such as PAR46, PAR64 and other models.It can be used for the lighting of the characters and scenery, or it can also be installed directly on the stage, exposed to the audience, forming a lamp array, for stage decoration and lighting.

8. Scenery slides (also known as projection slide) and sky curtain effect Lights: The overall picture and various special effects can be formed on the stage of the stage of the stage, such as: wind, rain, lightning, electricity, water, fire, smoke, cloud, etc.

9. computer light: This is a smart lamp controlled by DMX512 or RS232 or PMX signals. Its light color, light spots, and illumination are better than that of the above conventional lamps.top light, backstage of the stage, and the color, shape, picture, etc. in the operation can be prepared by the Running program.Due to the different power size, it should be different on the stage.Generally small -power computer lamps are only suitable for dance halls.The small -power computer Lights and light spots are often discussed by the stage spotlight, and the light Lights on the stage, so pay special attention in the selection.

10. Chatting light: It is a lamp on stage Lights. It is characterized by high brightness and use of lens imaging. It can show clear light spots. By adjusting the focal length, the light spots can be changed.There are activity light fences, which can easily change colors, and the lamp body can run freely.

The lighting effect of stage lighting

1. Chasing light: The so -called chasing light, this light source is used to track the performers and focus on highlighting the specific light of the characters on the stage. This light is the finishing touch of the stage of the stage.

2. Tiandi lighting: This kind of light is mainly used for color transformation or lighting between the sky. It is formed by a lighting lamps invested from above and below of the sky.

3. Bridge light: This kind of light is mainly used to help the column light. It is the light of the stage in front of the platform.

4. top light: This light source belongs to an ordinary stage lighting, which can play a role in enhancing the stage illuminance and can be illuminated by fixed -point.

5. Liquid light: This light is used to assist the bridge light, to supplement other specific light on both sides of the stage and supplement the light on both sides.

6. Foot light: It is mainly used to assist the surface light, which has the effect of eliminating shadows.

7. Backlight: It is a light projected from the opposite direction of the stage, which can enhance the effect of transparency and three -dimensional sense.

8. Cylinder light: It is a light projected from the sides of the stage, which can enhance the contouring sense of highlighting things.

design requirements for the aisle corridors

1. Light:The bright light can make the space look spacious and alleviate the tension generated by the narrow aisle.Multiple reference Lights, fire Lights, and Wall lights are commonly used in the aisle to create a light environment.

2, illuminance:In the home environment, the main role of the aisle is to assume the family's transportation, handling furniture or items. Therefore, the aisle requires a high degree of illumination to provide sufficient brightness.It is recommended that everyone provide a main lamp, or a main light and several co -lamps to ensure the illumination according to the depth and width of the aisle.

3. color temperature:The family environment is more suitable for people to feel warm and comfortable. For example, the warm color of the incandescent lamp is more suitable for providing lighting for the family environment.Therefore, as a frequent family aisle, it is not possible to use cold -colored Lights to provide lighting. It is best to choose warm -colored Lights that are uniform or close to other space -colored temperatures for lighting.

4, decorative:The choice of the aisle lighting requires the appearance of concise and bright appearance, elegant shape, to avoid using too complicated and gorgeous lighting.In the actual settings, it is recommended to set a main lamp at the center point of the aisle, and then use the special structure of the aisle to cooperate with the corresponding decorative lamps such as the corresponding shooting Lights, downlights, and Wall lights to achieve good decorative effects.

Act lamp effect diagram

What is good to use in the aisle corridor

1. Flat lamp

Press the structure of the structure beam on the corridor.This method is most commonly used in engineering design.It is suitable for dormitories, apartments and other residential buildings, industrial, teaching, office spaces, and scientific research buildings in the stairs or corridors, especially on the corridor.The ceiling lamp is equipped with a dust -proof cushion ring, which has good sealing performance. It can avoid small flyworms enter the lampshade, suitable for places with more wind and mosquito in the outer corridor.This lighting method is not high, but the cost is low.For these types of lamps produced by regular manufacturers, the materials selected by the lampshade are good, and the light is soft, the light is soft, the color is not easy to change, and the lamps are more efficient to achieve better results.Try to choose high -quality products when designing.This laying light method can use the point illumination calculation algorithm to calculate the illuminance value.

2. Dibl

Use embedded down lights.This method is suitable for living buildings or hotels, hotels or other recreational venues with ceiling dormitory, apartments and other corridors and staircases.The light source of the embedded trap generally uses a warm -colored small -power energy -saving lamps to create a warm, peaceful or romantic atmosphere in order to coordinate with the overall function of the building.Because the depth and width and width of the downlight cup are different, the pour Lights are divided into vertical downlights and horizontal downlights. Each form has a variety of styles, with different light curves.Lights.When the design is selected, pay attention to the high ratio of the lamps to avoid uneven illumination on the corridor and obvious light spots.Due to the height of the ceiling 2.5M For example, in general, the spacing of the cloth lamp in the middle of the light is 1.75 ~ 2.5M , The spacing of the lamp with a narrow light -type lamp is 1.25 ~ 1.75m EssenceThis cloth light method can use the point illumination algorithm calculation of the illumination value.

Act lamp effect diagram

3. Box -type fluorescent lamp

Use a box -type fluorescent lamp to suck the top installation or grille -type fluorescent light to embed it evenly.The degree of illness in this method is high, and it is suitable for the inner corridor of office, scientific research, and teaching buildings (( The outer corridor should adopt a closed dust -proof type Cure , To create a bright and efficient lighting environment.The use coefficient method can easily calculate the average illumination of the corridor and the stairwell.

4. Shooting Lights

The shooting light is a typical lamp and a fixed -scale lamp. If a row of small shooting Lights is combined, the light can change the wonderful pattern, which can be placed around the ceiling or the upper part of the furniture.In the skirting.

At present, the quality of the spotlights on the market is uneven, and it is difficult to distinguish the quality of the naked eye. Therefore, it is best to choose a brand product to buy a shooting light and choose a high -quality transformer with each other.

5. Wall lamp

The Wall lamp is generally equipped with a glass cover. The reflection light of the wall can make the light softer, and it has multiple effects of projection and blooming light. It shows different appearances due to the different residential materials.

The decorative effect of the Wall lamp is generally more obvious than the lighting, so when choosing, first look at the effect it is installed on the wall before deciding.When choosing a Wall lamp, pay attention to a few points. First, choose a protective cover, and the second is to pay attention to the quality of the lampshade and bracket.

6. Lantern wall design

There is also a common method of the aisle lighting design, that is, the light curtain wall. The so -called light curtain wall refers to the use of an embedded Light belt or led The installation of the curtain wall makes the entire wall surface or ceiling of the home show uniform lighting color, making the home show more warm and comfortable. However, this light design requires the overall lighting and design requirements of the home furnishings, and it is best to match each other.

Outer corridor lamp selection

For the outer corridor, it is generally outdoor lamps in the courtyard or Park.What types of wall lamps to be installed depends on what kind of decoration style of your corridor is. Generally, many of the outer corridors are mostly Chinese, so you can choose Chinese antique Outdoor wall lamps or European Outdoor wall lamps.There are more copper colors.

Inner corridor lamp selection

The inner corridor is generally set at home, so you can choose indoor Lights. Generally, it is commonly used. Small suction, ceiling lamps, wall lamps, etc. It depends on what light you like or the corridor design.Where is the design? If it is designed at the top, you must choose ceiling lights or ceiling lights, downlights, etc. If you are on the wall, you can choose a Wall lamp.

How to design home improvement aisle corridor Lights

1. Putting a mirror in the aisle, using the reflection effect will play a good penetrating effect and expand the horizons.

2. Placing a gorgeous retro crystal chandelier at the top of the aisle, making light, is a good choice.

3. The design of the wooden wall skirt is beautiful and practical. The exquisite shape and luster can set off the simple European style.

4. The walls on both sides of the aisle to create a photo wall or a family gallery are an effective way to avoid a single and add emotional atmosphere.

5. building a large storage cabinet hidden in the wall in the aisle is the most effective use of space.

6. Install the decorative Lights under the aisle floor, and at the same time, you can also fill beautiful small things, such as flowers, pebbles, etc., which will be pleasing to the eye.