1. Types of Ice knife shoes

Ice knife shoes are ice shoes worn during skating. The skating items can generally be divided into three categories: speed skating, pattern sliding and ice hockey. According to the characteristics and requirements of the project, Ice knife shoes are mainly divided into three categories:

1. Speed skating knife and shoes

Speed skating knife can be divided into two types: "Avenue Speed Slipper" and "Short -track Speed Slipper". Avenue speed skating knife knife is long, with a narrow blade, large ice area, small friction resistance, and short shoes.It is convenient for athletes to reduce their physical focus and reduce air resistance.

The short track speed skating knife is short, with arc at the bottom of the blade, and the area of contact with the ice surface is small, which is convenient for athletes to advance the arc when the athletes are on the curve. At the same time, the body of the ice knife is higher.In contact with the ice, most of the swords of the special sprinting channel are mostly mobile, for athletes to choose from their own habits and preferences.

2. Ice cock

The height and shortness of the ice hockey knife, short, large arc, thick blade, and the mid -range curved transitions smoothly to both ends, which can prevent slipping to the greatest extent to adapt to the characteristics of fast project rhythm and high resistance.It should be noted that the ice -hockey goalkeeper's ice knife is different from other athlete ice knives. It is made of all -metal and the knife is short. This design is to avoid missing the ball into the net.

3. Flower skating shoes

The sword of the flower sword is generally short, but it is slightly longer than the ice hockey knife. There are several ice teeth at the front of the blade, which is convenient for players to control the balance.At the same time, flower skating shoes mostly use high -shoes waist design to provide sufficient support during jumping.

Fantastic ice knives and shoes are different according to the requirements of amateur and professional, and the methods are also different. The amateur basically uses a PVC base PVC leather. The professional ones are basically the leather material, and the thickness of the inside is thicker and the hardness is hard.

The difference between three types of Ice knife shoes

The difference between the three types of Ice knife shoes is mainly different design characteristics, which is also the difference between the characteristics of the project:

1. The main feature of speed skating is fast speed, so the speed skating knife knife is very long, the blade is narrow and flat, so that the large friction resistance of the ice area is small, and the waist waist is short to reduce the body's center of gravity and reduce air resistance.

2. The ice hockey project is very confrontant. Therefore, the toe of the ice and soy shoes is very hard, the waist is high, the shoes are very thick, and the knife of the ice shoe knife is very short.

3. Falter skating movements are difficult to move and have higher requirements for stability. Therefore, there are grooves in the middle of the blade, and the knife body has arc to facilitate the turning of rotation and footwork.

What are the materials of Ice knife shoes?

The ice knife of Ice knife shoes is relatively sharp. It is generally made of steel. Its material mainly has the following:

1. Carbon Tool steel

Carbon Tool steel is generally used by beginners. Different quality ice knives depends mainly on carbon content. Although the hardness of the ice knife used in the same project meets the same standards, due to the different Levels of steel, under the same conditions, compared with the same conditions, compared with the same conditions, compared with the same conditions, compared with the same conditions, compared with the same conditions, compared with the same conditions, compared with the same conditions, compared with the same conditions, compared with the same conditions, compared with the same conditions, compared with the same conditions, compared with the same conditions, compared with the same conditions, compared with the same conditions, compared with the same conditions, compared with the same conditions, compared with the same conditions, compared with the same conditions, compared with the same conditions, compared with the same conditions, compared with the same conditions, compared with the same conditions, compared with the same conditions, compared with the same conditions, compared with the same conditions, compared with the same conditions, compared with the same conditions, compared with the same conditions, compared with the same conditions, it is compared to comparedHigh -level steel will keep the life of the edge of the ice knife longer.

2. Stainless steel, high -grade carbon steel or high -speed Tool steel

Generally used for skilled or intermediate enthusiasts, the ice knife has a high level of steel, it has strong corrosion resistance, and can improve the frequent jump and rotation of the skaters.This type of ice knife is usually plated with a titanium compound on the surface. After being polished, the maximum hardness on both sides can Dalo Hardness 85, which reduces the friction between the ice knife and the ice.Essence

3. Powder alloys and coating high -speed steel

Generally used in international competition, ice -knife shoes used in international competitions, their ice knives generally have basic essential characteristics such as wear -resistant, corrosion resistance, working surfaces for different ice surface hardness, frequent jumping, sliding, and not easy to connect to the sole welding.The coating high -speed steel is characterized by a thin titanium naineride or titanium carbide on both sides of the blade. The overall blade uses dual metal composite steel.After grinding and grinding, high hardness is formed on both sides. The roughness is like a mirror blade, which greatly improves the life of the ice knife blade without reducing the toughness of the ice knife.

4. Powder metal Tool steel

It has absolute optimal slippery and wear -resistant performance, and only a few companies in foreign countries are produced.

1. How to tie the shoelaces of Ice knife shoes

Ice knife shoes have shoelaces. If the shoelaces are not tied, it will affect the skating. So what is the shoe lace of ice shoe shoes?

1. Relax the ice shoes, pull out the shoelaces a little, and put your feet in it easily.

2. Put your feet into the ice shoes to ensure that the socks are straight, and the feet are completely placed in the ice shoes. Put your toes in, and then push the heels completely down.

3. Tighten the laces in the first half of the ice shoes. Be careful not to pull too tightly in this area.

4. Tighten the shoelaces where the feet and ankles are curved.

5. After the shoelaces are tied, before the hook is tied, one lace is wrapped around the other twice to keep it close to the arch, so that the shoelaces will not slide.At the same time, you can use shoelaces to make a cross -cross pattern and use both hands to pull each hook.Some players like to put the laces on the hook and below, and some people like to put the laces below, and then put them on it. Both methods can be.

2. The ice knife and shoelaces are tight or loose.

When Ice knife shoes are laces, some friends are worried about being unsafe, so they will tie the shoelaces very tightly; some friends think that the shoelaces are too tight and uncomfortable, and choose to relax. So how to grasp the ice knife shoelaces tightly?Intersection

Generally speaking, the shoelaces of Ice knife and shoes should not be too tight or too loose. The specific elasticity can vary from person to person, depending on how comfortable and safety; for beginners, it is better to tighten.It is convenient to control the blade, but be careful not to tighten too tightly, otherwise it will be easy to hoop your feet.

In addition, when the ice -knife shoelaces are tied, the first two or three -eyed shoelaces can be slightly loose. The lace behind the back should be tightened so that the ankle is not shaken in the shoe, so as to tilt it to both sides.Pour ice hard.If the ankle feels sore after 20 minutes, it means that the shoelace is too tight, and the shoelaces should be loosen and rest for a while, so that the blood circulation on the feet will be circulated.

What are the differences between ice and small shoes and flower skates and speed skates

There are four major ice movements on the Olympics. Except for curling, you do nt need to wear ice shoe shoes. Ice hockey, patterned skating, and speed skating must wear special ice shoes. There are certain differences in these three types of ice shoes.The differences between icehouse shoes and pattern skating shoes and speed skating knife shoes are mainly:

1. The difference between ice knife

(1) In the exercise of the ice hockey, the speed requires the speed, and there is an emergency stop turning.harm.

(2) The ice knife of the pattern skating shoes is longer than the ice hockey shoes of the same size. In the figure skating, some movements need to be placed on the heel, and other actions need to be balanced on the toes.The ice shoe cutting closer to the toe is jagged, and it is another key part of the design of the ice shoes.These only appear on pattern skating shoes, for jumping and rotating.

(3) The importance of the sport of speed skating lies in speed.To achieve this, every step athletes put pressure on ice to promote the promotion of ice.Therefore, the longer the blade, the higher the stability, and the sharpness and length of the speed skate shoes are the highest among the three movements.

2. Material difference

(1) Ice knife material:The material of speed skates and pattern skating shoes is generally made of stainless steel. Most of the ice knife of ice and petal shoes is also made of stainless steel, but some are made of carbon fiber, which will reduce its weight.

(2) Boot material:Ice hockey players need to be durable and comfortable ice shoes to fight ice hockey. The ice shoes are made of leather and plastic. The boots are narrow and deep. They can move quickly. There are fillings in front of the boots to prevent it from playing.The ice knife is welded on the boots and cannot be replaced.The pattern skating boots are usually made of inner leather and there is no pad. There is also a wooden sole on the inside of the boots, which is used for support. There is a small heel on the outside. It is also lighter, thinner and shorter.Because the toes are used for balance, the front end of the boots will be wider.The design of this ice shoes is not for comfort or speed, but to precise and exercise. The ice shoe blade is installed directly on the boots. After leaving the ice, you can remove the blade.The speed skating Ice knife shoes are sewn with high -quality thick cowhide, which are half -high waist and thin shape. The heels are hard, with the heels and fixed heels. The sole is the hard Skin. The ice knife is fixed on the soles with screws or rivets.

3. Differential protection measures

Ice hockey shoes have ankle protection, the ice knife is relatively high, the blade is thick, easy to stand and run, there is a groove in the middle of the ice hockey knife, the distance between the knife and the sole;The protective cover is to prevent the ice knife from being blunt or stained with dust impurities on the ground. When the players do not wear ice shoes, they use a soft cover to protect the ice knife.

The above three points are the main differences between the three kinds of ice shoes. The difference between icehouse shoes and pattern skating shoes, the difference between ice and pethero shoes and speed skates is still relatively large. Be careful not to confuse it.

1. What does ice hockey shoes mean?

After buying icehouse shoes, it usually needs to be blank. Many friends may not know what the blade means. In fact, the blade of ice hockey shoe refers to the first time the blade was grinded after buying the icehouse shoes.Stick the defects on the blade, form a sharp blade, and grind the inner and outer blades.

2. Is Ice Hockey's Blade?

need.

If the newly bought icehouse shoes, if the ice knife does not slide directly, the blade is "round" for a while (that is, it cannot be a right angle, with the arc), and then the blade is easy to open the knife (the left and right feet are intensive.Different, the degree of roundness is not the same, and then the blade is easy to open high and low feet). How expensive the Tube is, the new knife is required.

In addition, after the blade, it is not once and for all. If it is grinded for a while, it occurs that the ice is unstable and slippery, which means that the ice knife is needed to grind the knife.

3. What is the difference between ice hockey shoes and unspoken blade

Ice coat shoes are ice -knife shoes worn during ice hockey. They are the same as skating knife shoes and figure skating shoes. After buying, they need to make blades. Blade ice coal shoes and unshakable icehouse shoes are completely different.The differences between them are:

1. Different functional differences: Blade ice knife can skate. The ice knife without blade cannot skate and it is easy to fall.

2. Different effects: The blade of the ice knife can be strenuous on the ice, and the ice knife that is not blade is more blunt and cannot be worked hard.

3. Different appearance: The blade of the ice knife is more shiny and Smooth, and the ice knife that is not blade is relatively dull and dim.