Introduction to waterproof fabric

waterproof fabric is a new type of textile fabric, which is made of polymer waterproof and breathable material (PTFE film) plus fabrics with fabrics.The main functions of waterproof and breathable fabrics are: waterproof, humidity, breathable, insulation, windproof, warmth.

In terms of production technology, the technical requirements of waterproof and breathable fabrics are much higher than ordinary waterproof fabrics.At the same time, the quality of the waterproof and breathable fabric also has the functional characteristics that other waterproof fabrics do not have.While strengthening the dense and water density of waterproof and breathable fabrics, its unique breathability can quickly discharge water vapor inside the structure, avoid the structure of the structure, and keep the human body always dry.The problems are a new type of fabric of healthy and environmentally friendly.

Real waterproof fabrics can also be able to withstand water seepage pressure in a humid climate and environment for a long time, and do not seep water.For example, walking outdoors for a long time, Kneeling or sitting on a humid ground, will not seep water.

How to wash waterproof clothes

All E-PTFE film clothing can be washed.There is no permanent waterproof performance loss after washing. The surface DWR dialing function is lost and it can be simply repaired.

1. The waterproof fabric is more resistant to dirt. Add some detergent in the water. After soaking for 10 minutes, use your hand for a few minutes.Just dry it.

2. The blue cloth stained with vulcanized fuel, the adhesion of the general color is relatively strong, but the abrasion resistance is poor.Therefore, it is best to soak in the detergent for 15 minutes, rub it gently with your hands, and then rinse with water.Don't rub it with a rubbing plate, so as not to be white.

3. The green cloth made of oxidized fuel is generally strong and shiny, but it is easy to green when it encounters gas such as gas.Therefore, don't put the washed green cloth clothes on the stove.

4. If waterproof jackets are waterproof fabrics with coatings, they generally do not need to be washed frequently. When it is not too dirty, scrubbing with a humid and humid towel.Wipe it a few times and twist the towel again, and then scrub it repeatedly.If the inside is also dirty, you can use hand -washing method to put it in the bathtub, more warm water, detergent or meals, and grab a lot of washing.Then completely overwhelm the foam water, and finally put it in the washing machine to dehydrate.

precautions for waterproof clothes washing

1. You need to pull your waterproof jackets, buckle buckles, stick magic stickers, and restore the wind rope on the stretching hat -otherwise it will cause the fabric to distort.

2. Do not add a softener -the soft agent may cause the gel barrier, the fit film, and the lining to get rid of it, and the clothes are scrapped. Even if it is not so serious, the production of bubbles is inevitable.

3. Do not use hot water and warm water -waterproof clothing is afraid of high temperature.

4. Usually the drum is better than the wave wheel, and the wear and tangling of clothing are less, but it is not necessary.

5. Do not dry it. The waterproof fabric lining has a quick drying nature, and it does not absorb a lot. It does not take any effort if it is Hanging to dry. Do nt harm it with strong centrifugal force.

6. If you cannot determine whether the washing fluid used contains a soft agent (mostly), use the material such as washing powder and washing agent to wash.

Disclaimer: The above content is derived from the provision of the program system index or the sharing of netizens. It is for your reference only and does not represent the research perspective of this website. Please pay attention to the authenticity and authority of the source of the content of the content.Apply to delete & gt; & gt; error correction & gt; & gt;

1. What are the common quick -drying fabrics?

1. Dr. Saran Fiber

Dr. Saran Fiber's name is polypropylene fiber, commonly known as patelion. Among them, Super Dan Pthi is a new variety of polypropylene fiber towards simulation silk and fabrics.In addition to the advantages of corrosion and abrasion resistance, it also has the characteristics of environmental protection, softness, fast drying and dryness, breathable and comfortable wearing, and is an excellent choice for weaving fast -drying clothes.

2. Polyester fiber

100%contains polyester fiber, which will allow consumers to wear a layer of nylon discomfort.To avoid this situation, different brands have their own solutions according to their own functions.Some change the discomfort that the polyester fiber is absorbed through the different weaving method; some pay more attention to comfort and life, and some cotton and other components will be added;Very good quick -drying function.

3. COOLMAX

COOLMAX is the most common and relatively wide -range fabric, developed by DuPont.The prominent feature of the fabric is that it has a strong sweat absorption and sweat, which is due to the hollow structure of Coolmax.

4. MONY-DRY

Moni-Dry belongs to hygroscopic fast-drying fabrics and developed by Columbia.Its main feature is super volatile and water absorption, which is 2 to 3 times stronger than ordinary cotton cloth, which effectively protects the comfort and dryness of the fast -drying clothes.

5. Activent

Activent is a chemical material that is both windproof and breathable, and can also prevent a little water from the American GORE company. It is a thin film that needs to be used with other nylon materials.Quick dry clothes.

2. How to wash the quick -drying fabric

1. Local cleaning

First of all, pay attention to try not to get oil stains and not easy to clean, reduce the number of cleaning times, and prevent excessive damage to the film.If a part of the clothes is stained with stains, it can be cleaned locally on the pollution to avoid being stained with other parts and affects the overall beauty.It is recommended to use a universal foam cleaning agent. It is fully shaken before use, and then spray the foam evenly on the surface of the clothes at a position of about 20cm from the stain. After waiting for 30 ~ 50 seconds, gently wipe the stain surface with a cotton cloth.

2. Wash the whole piece of clothes

During the production process, in order to ensure waterproof, breathable, and windproof performance, various coatings or films are used on the fabrics of the quick -drying clothes.Therefore, the quick -drying clothes should not be washed and machine washed. Generally, it can only be washed with water by about 40 degrees (do not use hot water).

[Character fabric] What kind of assault clothing fabric?

Which fabric is good?

Choose the charge fabric

Everyone knows that good charge fabrics can not only reflect the overall design and novel styles, but also fully consider the external environment and occasions wearing.Let s teach you the 5 techniques of the screening and purchase of the fabrics of the jacket:

1. Because the jacket must be completely waterproof, the seam must be used to prevent the pins from leaking with hot pressure strips. Carefully see if the rubber bar in the clothes is flat and whether there is a bubble.The seams of the car are all crushed with waterproof rubber strips, ensuring excellent waterproof characteristics.

2. Whether the hem of the clothes has a windproof skirt or not, if there is no windproof skirt, you can tighten the clothes, and the drawing rope at the hem to prevent the snow from being poured into the body from the hem in a harsh environment.

3. Whether there is a breathable zipper under the armpit of the clothes.Not all assault jackets will have this design. There are ventilated zippers under the armpits, which is very useful in harsh environments or in large amounts of exercise.

4. Whether the tightening method of the cuffs is appropriate?The magic sticker design at the cuffs can be adjusted and loose at will according to different body types.

5. Whether the hat can cover the wind and rain well, whether the activity of the back head is free.If you use activities such as ice climbing and snow mountain climbing, you must also consider the activities after wearing a helmet.It is fully considered that the comfort of the wearer and the convenience during exercise can be removed from the three -dimensional design of the unloading hat and have multiple adjustable functions.

Selection and use of fabrics during the production process -physical properties.

1. Strong scrape: It can produce a stable modeling effect. The stiff fabric has a physical expansion, and it has no extra pleats and accumulation to make clothes. The design of A and H in the design is the most appropriate.To judge the stiffness of the fabric, you can simply put a small piece of fabric on the edge of the table to let it hang down naturally. The jacket made of the fabric in the red line will be more stylish

2. Feeling: It is comfortable to feel. It is not recommended to be too hard and too astringent. Especially the products sold in the mall, the customer's taste of customers consume is high.In terms of feel, nylon fabrics are better than polyester fabrics.Everyone's feel is different. The training feel is to touch more, touch the fabric of the famous factory, and touch the fabric of the first -line charge brand.

3. Anti -wrinkle: Punching sleeves and backs are frequent with tables and chairs, and the fabric is required to have high anti -wrinkle resistance.Rub the fabric samples hard, and then Smooth it. Look at the degree of wrinkles disappearing. The fabrics without wrinkles or a small amount of wrinkles have good anti -wrinkles.In addition, listen to the sound when rubbing, do not have rustling fabrics, because when wearing the clothes made by the fabric, you can hear you from 10 meters away.

4. The relationship between yarn and density: Now the punching clothes are pursuing lightweight, and the fabrics with thin, gauze chips, and high density are required;Wrinkles; good fabrics are mechanical indicators such as the feel, stiffness and anti -wrinkle resistance of the fabric by increasing the number of F numbers as much as possible, appropriately increased the twist, and increase the density.Therefore, when picking the fabric, you must go to the F number and twist data as much as possible.(F is the number of single gauze roots. The larger the single veil, the finer, the better the flexibility of the yarn, the better the feel will feel)

5. Organization/pattern/flower color: Chunya Textiles, Tatson, polyester tower, grid, and diagonal lines are commonly used classic fabrics, flat but enduring; pay attention to use small bistanic fabrics, and make good designs with good taste.Teacher to choose, people have their own good, tastes not representing the candidates of the public, they are easy to fall into the custom, and they will be reduced to street goods by accident.With buds, novel things can be available to attract consumers' attention, but to control the proportion appropriately, Jobs's realm is simplicity.

6. Thick thin: thin spring and summer, thick autumn and winter; don't affect the effect of glue pressure, thickness cannot make the clothes too bulky; the number of scrapers of the waterproof coating has a lot of impact on the thickness of the fabrics;Essence

7. elasticity: Properly use elastic fabrics on the back of the elbow, which can be a gimmick of ergonomics in the whole point, but if you use elastic fabrics for whole clothes, it depends on whether you can sell it.), Especially the fabric with spandex; the mechanical bullet is easy to collapse after washing; the elastic modulus should not be too small (the minimum power of the deformation of the fabric), otherwise it is easy to wrinkle when pressing the glue;Below temperature water

8. color saturation: It is relatively fresh and positive. In contrast, there will be a feeling of bright eyes.The saturation is very related to the hardness of dyes and water quality. Clariant's dye and auxiliary performance is very good. It is specified for some first -line varieties. South Korea and Taiwan's water quality helps color saturation (industry legend).color has great influence on attracting customers into the store and purchasing.If the clothing is combined, pay attention to the water -washing and sticky color of the first and second colors. The polyester materials are easy to stick to each other.

The production process of the jacket

1. Types of coating and film: The feel of the finished fabric is basically a film & gt; wet coating & gt;However, it is not environmentally friendly; 2.5L and 3L fabrics are currently from famous factories, otherwise it is easy to produce quality problems, and the rubber strip is responsible for matching the fabric factory.The problem of water washing rate in the middle and noodles caused the fabric to wrinkle; which test method must be specified in waterproof and breathable parameters, and it is strictly tested. In addition, it is best to do aging testing. Many new domestic in China have a lot of new domestic tests.The imitation coating has cracked turtle after washing the water many times, and the functions are lost.

2. ingredients: Tear and feel nylon are better than polyester. There is a good factory polyester fabric; recently, there are leisure brands with waterproof and breathable trench coats with all cotton tables;Sticky color.

3. The thickness of the yarn branch: In the case of the unchanged D also, the number of F numbers is required to increase the furniture of the fabrics, such as the same thickness wire rope, which will definitely be soft in the fine steel wire inside.

4. After finishing: The surface cloth is easy to dip the dust (especially the black); the natural luster of the chemical fiber is very low, and it should be treated as much as possible;Affect water washing rate, etc.

raincoatWhat materials are made

Modern society often uses plastic film or Raincoats made of rainproof cloth. Such Raincoats have the advantages of simple production, lightness and softness, many varieties and low prices.There are many kinds of raincoat fabrics in life, including nylin Oxford cloth, coating fabric, polyester fabric, PTFF (polytefluorolythery), GORE-TEX fabric, etc., but for Outdoor athletes, Breathable.

Tape: The glue of the raincoat is attached to the cotton cloth, soft and thick, and it is relatively strong.

Rainproof cloth: Both coats, good waterproof performance, but thinner and crispy.

plastic: Easy to carry raincoat, good water resistance, cheap, but not long service life.

Oxford cloth: Mianlun or polyester is obtained by a specific weaving method. It is easy to wash, fast dry, soft, hygroscopic, soft fabric color, soft cloth body, good breathability, comfortable wearing, and double -color effects.

Coating fabric: A layer of waterproof and humid coatings are coated with the inner surface of the fabric. For example, the raincoat commonly used by the police and climbers, the waterproof and breathable effect is better, but the price is high.

Polyester fabric: The biggest advantage of fabrics is that the wrinkle resistance and preservation are very good, but the chromosome is poor and the hygroscopic breathability is poor.

PTFF (polytrafluoroethylene): Wearing light, comfortable, good waterproof and breathable performance, cheap price.First used for the production of military uniforms and protective clothes, and then for sportswear.The manufacturing of tents and other items is also an excellent material for biochemical protection.

nylon: The product has a good gloss, good and abrasion resistance, but it is easy to deform under external force, so its fabrics are prone to wrinkles during wear.

GORE-Tex: Wind -blocking, rain -blocking, comfortable, and breathability. It is composed of film and high -performance textile fabrics, and a new type of bonding agent is sealed to provide long -lasting waterproof protection.

Buying skills of raincoat

1. Look at workman

The workmanship of the raincoat is very important. If the pin of the pin of the raincoat is too large, the needle seam is inconsistent, the seal is not up to the standard, and the anti -leakage treatment is not used.

2. Select the appearance

The appearance of the middle is one of the prerequisites for purchases. At present, there are many styles, colors, patterns, etc. of Raincoats. The space that can be selected is very large.

3. Try size

Choose a reasonable size according to your actual situation, and you can try it on if there are conditions.Avoid too much inconvenience to activities, or too small to play a good rain -blocking role.

raincoatPurchase misunderstanding

1. The thicker the raincoat, the better

For Raincoats, thickness is secondary, and the role of Raincoats is mainly to rely on waterproof fabric waterproof, that is, the quality of the raincoat depends on the fabric itself.Not big.Too thick Raincoats will also be poorly breathable, which will lead to decreased comfort.

2. The brand's raincoat must be good

Many people think that the brand's raincoat credibility is good and quality, and the one who chooses the brand must be the best.However, we must consider which products to choose in combination with our own needs, economic capabilities, and actual use. We must not just look at the brand. Maybe this brand's products are not the best for you.

Disclaimer: The above content is derived from the provision of the program system index or the sharing of netizens. It is for your reference only and does not represent the research perspective of this website. Please pay attention to the authenticity and authority of the source of the content of the content.Apply to delete & gt; & gt; error correction & gt; & gt;

1. sports weartightsHow are you?

In fact, sports wearing tights does have a special effect.But the premise is that you have to pick tights.The tights we choose during exercise must meet the elastic feet, strong plasticity, thin texture, and soft material.In this way, it will be very light without a sense of restraint.Of course, this is not the purpose of wearing tight clothes. Wearing tight clothes is mainly to alleviate muscle pressure and make exercise last longer.

2. What is the role of sports tights

1. There is a lot of exercise to tighten the body coat. It can help the human body absorb sweat, and it can quickly drain sweat to avoid cold.

2. The second advantage of exercise tight body is to promote the decomposition of lactic acid, because during the process of exercise, lactic acid will be produced in the body, and the compression of tights will break the lactic acid.

3. In addition, sports tights can also prevent ultraviolet rays, because most people are outdoors when they are exercising, and often have strong exposure to ultraviolet rays, so that they can avoid ultraviolet rays.

4. The last advantage is that it can highlight the muscles of the human body, highlight the beauty of the body's lines, and make people confident after wearing a sports tights.

3. What are the sports tights in sports

1. Polyam nylon fabric

It has the performance of far -reaching early nylon, solve the shortcomings such as poor breathability and abrasion resistance, can quickly dry the sweat of the body, and volatilizes from its surface.

2. Functional fiber

This new type of fiber material is lighter and softer than traditional chemical fibers.

3. Polytetrafluoroethylene waterproof and temperature -proof layer of fabric

This kind of fabric can breathe like human Skin, guide excess water vapor out of the body, and isolated from the invasion of external rain and snow. The mystery is that it is more than 70 million micropores per Square centimeter.

4. COOLMAX fiber

This type of fiber is becoming a big selling point in the market.The horizontal section of this fiber is unique and flat -shaped, forming a four -slot design, which can more quickly discharge sweat and volatilize, which is called a fiber with an advanced cooling system.

5. Silicon resin

Everyone is not unfamiliar, such as "shark leather Swimsuit" and "fast Skin", such as the main body of the silicone resin film.

6. Laika

It is also a material that we are familiar with. Its use has already exceeded the scope of sportswear, but it is a commonsportswearFabric.