1. There are several materials for Fish hooks

The fish hook is used for fishing. Its material is very important. There are many materials that can be used to make Fish hooks. Here are some common ones.

Generally speaking, there are three main materials for making Fish hooks, carbon steel, high -carbon steel and alloy steel. Among them, carbon steel Fish hooks are the most common, because it is more cost -effective, but most of the good Fish hooks still use it.Made of alloy steel, such as tungsten steel, titanium alloy, etc., are strong, abrasion -resistant, and anticorrosive.In the past, there were copper hooks, but because the copper was too soft, it was easily stretched by big fish, so it has been eliminated.

Second, the more sharp the fish hook, the better, the better

The material of the fish hook is related to its sharpness. The more sharp Fish hooks, the door of the hook door can pierce the fish lips more quickly. Therefore, it is generally believed that the more sharp and better.

However, seeking sharpness has brought new problems. It is difficult to maintain sharpness.

Therefore, in total, if you are fishing for fishing and often fishing, you do nt need to pursue a fishhook with a high degree of sharpness.

3. How to judge whether the sharpness of the fish hook is qualified

When fishing, although not too sharp Fish hooks, if the sharpness is not enough, the fish hook is too blunt, and the fish cannot be caught.Two methods:

1. Sting nails

Under normal circumstances, the thickness of the small thumb nails and the thickness of the scales of the big fish are not very different, and the thickness of large fish scales is often the same as the thickness of the fish lips.If you can pierce the nails of the nails, if you can easily pierce, it means that you pass the level.

2. A4 paper test

If you do nt have long nails or do nt want to break your nails, you can also use a piece of A4 paper to test it. After folding A4 paper, after three consecutive pairs of pairs, puncture with the tip of the hook hook.At least it meets our needs. If we can do not take the power of ash, and after four folding, it is quite sharp. As for thicker, it is not necessary.

1fishing in the Fertilizer pond

The fish that grows in the Fertilizer water environment is full of bait and is full.In such an environment, fish are extremely picky about bait. Generally, bait that are not strong and have no special odor at all ignore it.Therefore, different bait must be configured for the specific circumstances of different pit ponds.For example, some pit ponds can add some flavors to fishing or carp in the bait.;;Some pit ponds need to be hooked with sour bait fish;;Some pit ponds are more complicated. The granules should be squeezed with beer, add high -quality wine, honey and appropriate amount of jade milk fragrant food powder, etc. The fish is willing to swallow the bait.

If you fishing catfish, bait is better to use broad bean Flour, rice, rice noodles, noodle bait;;If you fishing carp, bait is suitable for Sweet potato, corn kernels, and grass tipsItemsIf the fish farmer often puts beer and fed fish, it is better to use the beer of corn kernels, Wheat grains, carp and grass carp.In short, bait should be suitable for both sweet and sour and odorous, and the additives should be mixed with less.

2fishing in the Xihe flood season

The fish that grows in the Fertilizer water environment is full of bait and is full day.

Whenever the rainy season, the rivers enter the flood season, and the river water has changed from clear to yellow, and rainwater and water will bring a large amount of fish food into the river.At this time, the fish is in the dietary period.At this time, fishing in muddy water should be used with bait, such as earthworms, locusts, crickets, and Beans.Earthworms are best linked to the whole hook, or you can tie multiple small red earthworms together, and finally install it.The bait is tough, water -resistant, and wide adaptation.

3fishing in natural waters and wide water surfaces in natural waters

The range of fish activities is large. If you want to lure the fish as soon as possible, the taste of the bait is strong, the amount is large, and the bubbles are not easy to disperse, so that the fish can be attracted into the fish nest quickly.Can((Bean cake pieCure,granular((Granulets, rice soaked rice and milletCurePink((Fragrant corn noodlesCureMix the nest after the three((In order to prevent the corn surface floating away, stir with water in the fishing field before the nests to stir into a group and hit the nest.CureThe fishing effect is significant.

fish in natural waters is very mixed. Some are used to eating wild food and developed oral habit. The basic principles of the use of bait are mainly natural food.For example, when the corn is listed, the tender corn kernels are used((The effect will be better after being soaked in liquor or pickled sugar);Sweet potato mature season should be used as bait with Sweet potato.

4fishing in flowing water and storms

The water flow rate and the size of the wind and waves are rooted, and the bait is set into the setting of the upstream of the water flow, so that the bait will have a advance amount when it accurately enters the bottom of the nest.There is basically no bait in the flowing water, and the bait should be used to use bright red live bait such as earthworms and red worms.In addition, small fish, shrimp, cicada, and other insects on the trees are also good bait that can be selected.

The water flow rate and the size of the wind and waves are rooted, and the bait is set into the setting of the upstream of the water flow, so that the bait will have a advance amount when it accurately enters the bottom of the nest.

5fishing in the stream

In the stream fishing, you should choose bait according to the situation and different fish.If you are fishing bottom fish, you can consider using red earthworms as bait.If it is fishing fish, bait depends on the fish. Floating white ravioli and other fish on the water can be used as a flyworm and other flyworms as bait.When the fish saw a flying worm, he scrambled to swallow.If it is a grass carp fishing for floating water, use pumpkin vine as a bait, easy to linked, can drift on the water, which can cause grass and fish to swallow.

It should be noted that the bait fishing with streams does not use streams when reconciled. The second is to use fresh eggs or duck eggs, take out the egg yolk, and leave the protein liquid and Flour.Harmony with sticky soybean -grain large group, and then install hooks;;Or install a good dough into the special bait, and automatically pick up bait and bait during fishing.The creek bait used by protein, fish love to eat, but also not easy to be flushed by flowing water.

6fishing in the tide

Due to the influence of the rising tide of the sea, bait and bait are not easily dispersed and washed away.It is not easy to soaked in pieces of pieces or heavy granular bait in the water to resist the shock of the tide. The effect of wine soaked rice is also good. The bait in the bait is preferably earthworm, and red insects can be used in winter and spring.Point bait can be used for rice grains or corn grains.

7, fishing in a wild grasshole

The first is to make nests. The bait must have sufficient fragrance and color. Fresh vegetable seeds are commonly used to add curved wine, lilac wine rice or rice grains.2Make up once an hour.Baish bait is commonly used in large flat2Number red earthworms, rice grains, commercial bait, earthworms are best used3 ~ 4It's better for centimeters of life.

1. What does Fish drift ripe mean?

Fish drift is a very important Tool in the fishing process. Its main function is to convey the signal of fishing bait. At the same time, it can help us change the location of the fishing water layer and adjust the status of the hook bait. Before using the Fish drift, it is necessary to make correct adjustments.Otherwise, it may not be able to accurately judge the state of Fish drifting, which is the so -called "drift".

Drilling is one of the essential basic techniques in fishing. It involves the adjustment of the balance of the fishing group in the water. The principle is to increase or reduce the weight of the lead pendant and the position of the mobile Fish drift, so that the line group is suffered by the line group.The buoyancy generated by gravity and Fish drift can reach a balance.In this way, when there is a fish biting hook, the movement of the fish will break the balance of the line group and accurately pass it on to the Fish drift. The fishermen can determine whether the rod is needed to pierce the fish based on the Fish drift.

Second, Fish drift tone term

1. Halfwater state

Semi -water does not mean half of the water depth, but the distance from the fishing group to the bottom.When adjusting, the closer to the bottom, the more accurate the adjustment.A common method is to find the bottom with the lead, then pull the float to the position of the sub -line plus the float length.

2. Flat water state

Flat water refers to the state where the float and the water surface are parallel.When the float is just parallel to the water surface, it can be called "0".Seven -star drift tune water refers to the top of the top of the top of the water.Setting water is also one of the most common ways to dill in wild fishing.

3. Demonive state

The melting refers to the position of the float by adjusting the position of the lead Skin in the semi -water state.The more the exposed meters, the higher the adjustment.In general, the higher the adjustment, the more sensitive the floats; the lower the adjustment, the more dull the float.

4. fishing state

The fishing eye refers to the specific number of messengers after Hanging the bait to expose it by moving the float.The more the exposed meters, the higher the fishing.Under normal circumstances, the lower the fishing, the more sensitive the floating drift; the higher the fishing, the slower the float.

Third, the correct way to drift Fish drift

When Fish drift is drifting, it is generally determined based on factors such as water depth, water flow, and target fish species.What about it?

There are many ways to dill fishing, and the steps are not exactly the same. Generally, it is recommended to learn one first, proficient in one type, and other drift methods are also touched by bypassing. The following 5 -step drift method is introduced to yourefer to:

1. Find the bottom

Finding the bottom is always the first step in bleaching. It is to determine the depth of the semi -water. At the same time, to see the depth of the fishing spots, it can be roughly tried if the bottom can be tried.It is relatively simple to find the bottom, that is, the lead Skin is covered with enough lead Skin, but there is a certain need to pay attention. At this time, the state is to lie down at the bottom of the lead. It is best to expose a small amount of mesh. Keeping the water line is straight.

2. Drinking

The drop -down float determines a depth to adjust the drift. This depth is often said to the semi -water depth. The closer to the depth of the semi -water depth, the more accurate the drift.How much distance does the drop -down drift?When the lead pendant is looking for the bottom, the lead falls to the bottom, and the sub -line is lying on the bottom of the water, so as long as the drop -down distance exceeds the length of the sub -line, it is basically suitable.But for the sake of insurance, it is often a 1.5-2 times.The first space Beans in the floating seat can stay in the bottom of the bottom. When you hang the bait to find the bottom, find the bottom between 2 space Beans, and the bottom will be very fast.

3. Determine your eyes

Once the depth of the semi -water is determined, and the lead Skin is trimmed.As for how many meters, you need to consider the weight of fishing and bait.Generally speaking, bait still wants to fish lightly, and the eyes cannot be high.Anyway, there are formulas to refer to, fishing eyes = eye-double bait weight.It can be seen that this formula is related to the height of the purpose of fishing and the weight of the bait. On the other hand, how much is determined by the eyes, and it is necessary to consider the weight of bait and fishing.

4. Weighing bait

Some fishermen may ignore this step, hang the double bait to find the bottom, and start fishing for the number of mesons.To say that fishing can definitely be caught, but it is not accurate.It is best to hang a double bait to see how heavy the 2 bait are.This is convenient and flexibly adjusted to Lington, clearly knowing the state of double bait on the bottom of the water, and easy to find.Directly hang the double bait to find the bottom. If the bait is very heavy, then there is no problem. If the bait is light, the bottom will be exhausted.

When you say that the bait is heavy, you may hang both bait without the number of meters, or you can have the goals.If you do nt have a few meals, you can catch a few double bait to the end, but you just know that the double bait is in the end.If there are meters, assuming that it is 2 mesh, as long as you hang the bait to find the bottom, the fishing eye is a little more than 2 meters, then it will be the end.

5. Determine fishing

We fixed a space bean when we found the bottom, and the length of 1.5-2 times the length of the sub-line was pulled down, so that we don't need to try too many times when we find the bottom.We have adjusted 6 meters above. Hanging double bait is 2 meters. Hanging single bait should be 4 meters. If you want to catch a bait to the end, one bait does not go to the end, find the bottom fishing 2-4 meters, and the fishing double bait to the end.fishing 4 meters more.If you want to catch a few eyes and fish, you can catch what you want to catch. This is the benefit of knowing the weight of bait.

Fourth, what are the tunes of Fish drift

When the fish drifts, there are many ways to adjust, such as adjusting the three fishing two, three fishing three, three fishing and three, etc., generally choose according to the needs of the fisherman and the fishing point.Introduce it for everyone:

1. Tune three fishing two

This is a common method of drift.First of all, find the depth of water at the bottom by heavy lead, and then cut the lead Skin under the half water, so that the drift is exposed.Finally, hang the bait and pull the drifting seat, so that the Fish drifting just shows two eyes.

2. Tune three fishing three

This is also a common method of drift.Similarly, first use heavy lead to find the depth of water at the bottom, and then trim the lead Skin in the half -water state, so that the drift is exposed to the three purposes.Finally, hang the bait and pull the drifting seat, so that the Fish drifting just shows three eyes.

3. Rather four fishing two

This is another common drift method.Similarly, first use heavy lead to find the depth of water at the bottom, and then trim the lead Skin in a half -water state, so that the drift is exposed to the length of the four destinations.Finally, hang the bait and pull the drifting seat, so that the Fish drifting just shows two eyes.

4, adjust the four fishing three

This is also a common method of drift.First of all, find the depth of water at the bottom by heavy lead, and then cut the lead Skin in the half -water state, so that the drifting exposes the four -purpose length.Finally, hang the bait and pull the drifting seat, so that the Fish drifting just shows three eyes.

5. Turning five fishing three

The last common drift method.Similarly, first use heavy lead to find the depth of water at the bottom, and then cut the lead Skin under the half water, so that the floats show the five -purpose length.Finally, hang the bait and pull the drifting seat, so that the Fish drifting just shows three eyes.

1. What is the tone of Luya pole

Luya pole is often marked with tunability like the hand pole. The so -called tone refers to the position ratio of the bending point when the Luya pole is stressed.Tune (ultra -slow tone), S tone (slow adjustment), MR tone (medium slow tone), R tone (medium tone), RF tone (medium fast adjustment), F tone (fast adjustment), FF tone (ultra -speed adjustment), XF tone (extremely fast), etc.

2. What is the hardness of Luya pole

The Luya pole is often marked with hardness as the hand pole. The so -called hardness refers to the overall hardness and hardness of the pole body when the Luya pole is stressed.soft rod), UL (ultra -soft rod), L (soft rod), ML (medium soft pole), M (medium pole), MH (medium hard pole), H (hard pole), XH (ultra -hard pole), xxh(Extreme hard pole) and so on.

Third, Luya pole tone comparison table

Fourth, Luya pole hardness comparison table

Fifth, how to choose Luya pole tone and hardness

1. The tone of Luya pole

Children's pole is suitable for handling hard bait, fast -tone road Asian pole is suitable for manipulating soft bait.Because the sensitivity (conduction) of the pole is different, the faster the tone, the better, and the more obvious the bite of the fish is perceived, so we often choose the tone of the fast -tuning above -F or XF.And the throwing the medium -to -MF (MF) pole is better than the fast -tone pole. The comprehensive performance of the medium fast adjustment is strong. In order to solve the problem of throwing, beginners often choose medium fast poles.In the middle, the below -M, S, SS, the sticky fish is better, it is not easy to run fish, and at the same time, it can filter the vibration of the hard bait itself, thereby enlarging the fish news.

2. The hardness of Luya pole

The soft rod is suitable for throwing small bait fishing fish.When throwing, we will use the elasticity of the pole tip, because the soft rod elasticity is good, the bait range is small, the bait is more comfortable, the big bait pole is easy to break, and it is not far away.The elasticity of the pole tip of the hard pole is not enough to drive the small bait. One is uncomfortable, and the second is not far away, so the hard pole is suitable for throwing big bait.

We can choose the Luya pole of different hardness and tone according to different fishing grounds and target fish.For example, the Leiqiang fishing method in the heavy grass area, we can choose the median hard pole; and the use of soft bait fishing catfish, in order to perceive the slight motion of the water, can choose the soft fast rod.

1. How much is the Fish drifting

The three major pieces of equipment to be used in Fishing rods and Fishing lines are used side by side. It can convey the information of fish swallowing bait to the fishermen and display the location of the fishing spots. So how much is the price of Fish drift?Intersection

There are many Fish drifting products on the market, and the price is high or low. From a few yuan to hundreds of yuan, most of the Fish drifting prices are about tens of yuan. The main factors that cause price differences are production brands, materials, and materials, materials, materials, materials, materials, materials, materials, materials, materials, materials, materials, materials, materials, materials, materials, materials, materials, materials, and materials, materials, materials, materials, materials, materials, materials, and materials, materials, and materials, materials, materials, materials, materials, materials, materials, materials, materials, materials, materials, materials, materials, materials, and materials, materials, materials, materials, materials, and materials, materials, materials, materials, materials, and materials, materials, materials, materials, and materials, materials, materials, and materials, materials, and materials, materials, and materials, materials, and materials, materials, and materials, materials, and materials, materials, and materials, materials, and materials, materials, and materials, materials, and materials, materials, and materials, materials, materials, materials, materials, materials, materials, materials, materials, materials, materials, and materials, materials, materials, and materials, materials, materials, materials,Performance parameters, work fineness and other aspects.

Note:The above price source network is for reference only.More Fish drift prices reference & gt; & gt;

2. Where can I sell Fish drift

As a common Fishing gear, Fish drift can be bought in fishing gear shops. Some black pits (commercial fish ponds) usually buy Fish drift.If you buy Fish drifting in a physical store, some brands and material Fish drift cannot be bought. At this time, you can also buy it through an online e -commerce platform, or buy it through a second -hand trading platform.

Third, how to choose a good fishing float

fishing floating is "the eyes of the fisherman". Good floats can quickly and accurately send out the oral signal to provide strong help for our spiny fish.If you want to buy good floats, pay attention to these aspects:

1. Whether to eat water

The so -called water eating is the change of the number of floats after the adjustment.This phenomenon has caused a lot of obstacles to our fishing.Therefore, choose floating drifts that do not eat water.We can wrap some leading leather on the tuned floats and put them in the drift barrel to expose a certain number of mesons.After a day, observation of the number of goals changed.If there is a change, it means that it is a floating drift.

2. Tongshu

To put it simply, it is the center line of drifting, drift, and drifting tails.The appearance looks straight and has no curved.You can open one eye, look at the tip of the drift to the tip, rotate the float while looking, and observe whether the float is straight and uniform.

3. Focus

Put the floats on your fingers and see where the support point is in the float.The closer to the position, the more the center of gravity is, the faster the float turns over.On the contrary, the focus is on the focus, turning slowly.

4. Metropolitanians

Whether the number of drifting tails is clear, whether the length is uniform, whether the size is consistent, etc.In addition, you can squeeze the tail with both fingers and experience whether the layer of the drifting tail is Smooth, Smooth, and raised.The aim of good floats must have the above advantages.

5, lacquer surface

Whether the paint surface of the floating appearance is flat, Smooth, the light is bright, and whether there are stains such as bubbles and particles.A good float appearance should be Smooth, flat and shiny, without any stains and bubbles.