How to close the use and maintenance method of the fish wire wheel to put the line fish wire wheels
1. How to use fish line wheels
Method of loading
1. Put the fishing line on the fishing rod.
2. Open the fishing Ship's inverse switch, turn on the fishing wheels in line, pull out the line, close the line ring, and pass the line through the fishing rod guide ring.
3. Tie the fall line, tighten each section of the fishing rod, and close the fishing wheels to stop.
fish line wheel launch method
1. Open the fishing Ship's inverse switch, rotate the joystick, the adjustment line falls at the appropriate position, and turn off the inverse switch.
2. hook the fishing line with your index finger, turn your head on the side, send the pole back, and the pole is touched on the ground to the ground.
3. Put forward the rod on the side. When the pole is on the front and the ground holds a 45 -degree angle, the shaking force is loose and pops up.
4. When the wire falls, after the pass is over, shake the joystick, close the line ring, tighten the fishing line, and put the pole on the rod.
Method of fish line rotation line
1. Lifting rods and shake, the fishing line remains straight, and the pole is 45 degrees on the ground.
2. Shake the wheels at a constant speed, the fishing line remains straight, and the fishing wheel pine knob is adjusted with the size of the fish power.
3. After the fish is collected, put the pole on the frame. Do not touch the fishing wheels to scratch.
Way to unload
1. Turn off the inverse switch and fall down the thread.
2. Tighten your fingers and shake the joystick.
3. Put the wires on the line.
4. Remove the wheel, clean, install.
2. How to maintain the fish line wheel
Under normal circumstances, the internal parts bought from the market are applied with an appropriate amount of lubricating oil.However, the fish line wheel line is the same as other precision machines. It needs normal cleaning and maintenance after a period of time.
1. Regular maintenance
Generally, 25 fishing is a maintenance cycle.After using the fish wire for a long time, if you want to maintain the best state of the fish line, you need to apply a layer of lubricant inside the main body of the fish wire.
2. maintenance method
First remove the rocker arm and brake structure, then loosen the side cover screw, remove the side cover, and give the lines of the line of the lines, bearing, main gear and tooth pole, and the tooth oil of the tooth.Be careful when applying oil, because excess lubricant will flow to other places to destroy its performance.
3. Check in time
Whenever fishing, especially after rainy days and sea fishing, you should check your fish wire wheels in time to prevent any sewage or dirt and sand in the fish line.
4. storage method
When you stop fishing for a long time, you should maintain it once and put it dry.Before storage, use a clean and humid cotton cloth, wipe the fish line wheels, and then wipe it with a dry towel, and finally add lubricating oil.