The reason why wealthy bamboo leaves are yellow

1. Incorrect light

Rich bamboo is a green plant that requires light, but the sunlight is too strong to cause the leaves of the leaves to lose moisture, which becomes yellow and withered.The ideal lighting method of rich bamboo is semi -yin, that is, give appropriate shade when receiving sunlight, or plant planting in a light transmitted place, so that it is not easy to turn yellow.

2. Incorrect fertilization

Like many potted plants, rich bamboo needs to be fertilized to ensure sufficient nutrition.However, wealthy bamboo should not apply too much fertilization. Too much fertilization will reduce the absorption of water to the absorption of water, which will cause the leaves to become yellow and become rough, and the gloss will disappear.Therefore, fertilization should be appropriate. If you accidentally apply too much Fertilizer, you can use water to pour the Flower pot to dilute the Fertilizer.

3. Infection at the root

Some of the rich bamboo are hydroponic. If you do not change the water for a long time, it will cause rotten rotten.Sometimes when you see the rich bamboo leaves, you can check the roots. If you find that rotten, change the water and clean up the rotten roots, use cold water or pure water.If it is too serious, you can change the water and static for one night before changing the water, so that the chemicals can be wrapped off in the water, so that it can be solved.

4. Lack of oxygen

Any plant needs to be obtained by breathing, but if you often turn off the windows.As a result, the indoor air is very thin. The rich bamboo cannot absorb oxygen, and the natural breathing effect will slowly weaken, resulting in the inability to absorb organic components in the plant.As a result, the leaves of rich bamboo are slowly stunned, and then the leaves will slowly yellow, and then the leaves will begin to wither.Then your wealthy bamboo is not far from death.

5. Place

Under normal circumstances, wealthy bamboo should be placed on the balcony or something like some cabinets.But no matter what, you must remember firmly, don't put rich bamboo with those household appliances.Many people may be curious, why can't it be placed with domestic appliances.This is because household electrical appliances are prone to static electricity. Although not much harm to the human body, it is different for plants.The electrostatic electrical electrical electrical electrical electrical appliances may burn the leaves of rich bamboo. Once the leaves are burned, the leaves will slowly start yellowing.This will also lead to the death of wealthy bamboo.

What to do if wealthy bamboo leaves are yellow

1. Reasonable watering

The biggest cause of yellow leaves in rich bamboo is water. Too much water will exacerbate the phenomenon of yellow leaves.Excessive watering will fade the leaves of rich bamboo, gradually becoming yellow, and mainly occurs on the new leaves.At this time, we must remove the wealthy bamboo hair from the breeding ground. When the plants are dry and dry, and then put it back to the soil from the bottom, we can solve the yellow leaves well.If it is caused by too little watering, the edge of the leaves of rich bamboo gradually becomes yellow, and it has no effect on the growth of the new leaves. In this case, as long as you water it in time.

2. Control light

Rich bamboo is happy. If the wealth bamboo is in an environment where a strong light is in a strong light during the breeding process, it will easily lead to yellowing of wealthy bamboo leaves.However, if there is no light for a long time, the chlorophyll of the leaves will not be formed in time. This will naturally make the leaves yellow, and in severe cases, the leaves will fall.Therefore, in the process of breeding, we must control the light around the wealthy bamboo.Neither can it be directly shot by strong light for a long time, but it must also accept the sun appropriately.

3. Appropriate fertilization

All crops are inseparable from nutrition during the growth process, so of course, rich and rich bamboo is no exception.In order to promote the rich growth of wealthy bamboo, increase the value of ornamental, and further expand its breeding benefits.Unlimited fertilization can make the leaves yellow, the top of the new leaves is yellow -brown, and the old leaves are yellow.Natural Fertilizer should not be too small, too little will cause malnutrition of the leaves.Chlorophyll secretes too little, causing the leaves to become yellow.Therefore, it is necessary to appropriately apply fertilization according to the growth of rich bamboo, rather than blind fertilization, and a good fertilization method can maximize the benefits of breeding.

4. Pruning blades

In the process of wealthy bamboo breeding, due to the role of metabolism, the growth of the leaves will continue. The number of leaves should be observed. When the number of leaves is too large, the old leaves should be cut off in time.To prevent the leaves from being too lush and affecting each other, the light is uneven, resulting in yellowing of the leaves.When trimming the leaves, pay attention to light trimming to prevent the bamboo stems of rich bamboo from being damaged when cutting the leaves.Otherwise, the wealthy bamboo wound infection can easily cause a variety of pests and insect pests, increase the mortality rate of rich bamboo, and reduce its own breeding economic benefits.

Disclaimer: The above content is derived from the provision of the program system index or the sharing of netizens. It is for your reference only and does not represent the research perspective of this website. Please pay attention to the authenticity and authority of the source of the content of the content.Apply to delete & gt; & gt;Correction & gt; & gt;

Leafmu bonsai production and maintenance

The leaf wood bonsai is made of beautiful tree -shaped shape, dense branches and leaves, strange leaf -shaped, and varied leaf color, which highlights a type of bonsai with leaf -viewing effects.Commonly used materials are red maple, chicken feet, triangle maple, Wei spear, waves of winter green, ten major contributions, ginkgo, wolf Bone, Soviet iron, brown bamboo, phoenix and other tree species.This kind of bonsai not only watchs leaves, but also has other ornamental effects.But with the bright and pleasant leaf color and the novel leaf shape of Yamei.The leaf wood bonsai has evergreen trees, which are evergreen in the four seasons and can be seen all year round.There are also deciduous trees. With the changes in the seasons, different colors are present. Although the cold winter leaves fall, they can still watch their cold trees.

How to make in the leafmill bonsai

1 , Choose tree species and cultivate :In addition to the cultivation of gardens in the cultivation of the leaf wooden basin, the sapling in the wild is one of the important sources of solution to the setting of the stump pelvis. Many masterpieces of masterpieces come from this.In the barren mountain slope or stone seams of the barren mountains, beside the road, beside the water, stone shore, and Chai Mountain forest, the normal plants grow in poor growth, and you can see it in the trees with beautiful attitudes and suitable for making landscapes.Processing.Of course, the tree species of the leaf wood bonsai can also be sowed through all kinds of seeds, cuttings, and seedlings, and then processing and cultivation. However, this method is relatively long.

2 planting the pot:The collection of leaf wood bonsai raw materials or seedlings need to be put on the pot first.The soil of leaf wood bonsai can generally use mountain rotten soil and then mix with river sand, or can be mixed with cypress rotten leaf soil plus river sand;The garden soil is mixed with a valley bran.

The time of leafmu bonsai is generally in the spring of each year2 Arrived in the end of the month 4 In the end of the month, if it is autumn leafmu bonsai upper pot can be in the year 10 To mid -month 11 During the moon.

The pots used in the leafmu bonsai can use different pots according to different bonsai, such as using porcelain pots, like a cliff -like bonsai can use the purple mud basin with a smaller basin.Shallow pot.

Pay attention to the position of the basin and the art effect of the bonsai in the pelvis of the leaf wood bonsai. If it is a garden basin, generally do not plant the leaf wood bonsai in the middle of the basin. It can be slightly a little bit, and the artistic effect is better.

The shape of the leaf wood bonsai is dominated by the trunk. The underneath of the general trunk is thick, and the top will gradually become thinner.

3 , Leafmu bonsai processing and finishing:After the pelvis of the leaf wood bonsai, some processing treatment is needed, so that the shape of the leaf wood bonsai will be more beautiful.Some of the processing methods that can be used are dry, peeling, carving, climbing, tearing and other methods.

How to raise leaf wood bonsai

Five taboos of leaf wood bonsai maintenance

1. Avoid soaking water

Long -term excessive watering can easily cause plants to flow into the soil due to dialysis, causing the plant to wither or even die.Like elm tree, golden bird, wolf Bone, simple tree, Yang Yang, etc. need special attention.

Second, avoid acid and alkali soil

my country takes the Huaihe River as the boundary,, Northern alkaline ,, Nando acidity, mountains and soil are acidic ,, Plain is alkaline.

The southern acid soil can be adjusted with soda or lime. The northern alkali soil can apply acidic Fertilizer or multi -use farm organic Organic fertilizer.

Three, avoid "Move the pot"

Each plant has a specific transplantation time, such as Chinan and Wolver Bone Avoid autumn Movement,, Peony avoid spring movement.

Fourth, avoid excessive trimming

In order to survive the survival of transplanting and trimming, the pruning and blades will be trimmed. There is no problem in common sense.But like pine and cypress plants, if over -pruning, it will affect the germination of the new buds.

5. Avoid sterilization at will

Su Tie, pine cypress are avoided"Potassium permanganate" and "Bacteria Clear", remember!

Morphological maintenance, trimming

Generally speaking, the trees are stronger, the growth is strong, and the growth is less cut.From the needs of the trees, it is usually cut off the cluttered cross -branch, overlapping branches, parallel branches, round branches, raw branches, thin branches, pathogenic branches, etc.The nutrient concentration of the branches can grow strong.

1 Pruning time

Miscellaneous wooden bonsai can be trimmed all year round, and pine and cypress should be trimmed in the dormant season.

In the rainy season, there are many rainwater, the air humidity is large, and the trees grow strong. It should be cut less. A large number of branches and leaves are cut off will affect normal growth.In addition, the end of the autumn should not be cut again, and the cold current will freeze to death.

The best time for re -cutting and strong cutting is1-2 The trees are in the dormant period.However, some cold -resistant trees should not be trimmed in winter, because the wound is difficult to heal, it is easy to leave scars.

2 Subcer

Tree species with strong buds in the bonsai are germinated and fast in the growth season. It should erase the root buds, dry buds and axillary buds in time.At the same time, pay attention to retain the direction, location and density of the bud.In order to avoid germination of fork branches, raw branches and overlapping branches, affecting the aesthetics of the tree.

3 top

The new shooting head of the tree growth period not only suppresss the new shoots, and promotes the growth of the side branches to maintain the beauty of the tree -shaped posture.The top -up time is different due to the different period of germination of different trees.Leaf and wooden bonsai, when the new leaves are expanded2-4 You can get topped when the film.Flower and fruit bonsai should be flexibly grasped according to different flower and fruit periods (topping can promote flowering).

4 Leaf

Proper leaf picking can reduce the leaves and promote new buds again to increase the ornamental value of bonsai.The time for picking the leaves is different from the tree species. The leaves can be picked in early summer or early autumn, and the evergreen trees should not be picked.During the period of picking the leaves, the water should be appropriately deducted. The pot soil should not be too tide. In addition, it should often apply rotten cake Fertilizer water to strengthen ventilation and light to promote the germinated new leaves.

1. Is there a shelf life?

There is a shelf life of the alarm. If a Positive umbrella is used normally, it can be used for 2-3 years.The sun umbrella is baptized in the sun every day. Over time, the materials will have a certain wear. Once the sunscreen coating is worn and damaged, the effect of sunscreen will be greatly reduced.If the rain is rained in the middle, the sunscreen coating of the Parasol will be aging faster.After 2-3 years, the Parasol can also be used as an umbrella.

2. How to maintain a sun umbrella

1. The main function of the Solar umbrella is to block the ultraviolet rays. The fabric of the Solar umbrella is very fine and contains small particles, so it is best not to use a brush to brush, just wipe it with water or wet towel.Dry the ventilation place, (it is best not to put it under the sun) and wait for drying, then gently remove the soil, then wash it with detergent, and then rinse with water and dry it.

Remember: Do not brush it hard with a brush, otherwise it is easy to break after drying!And don't let the umbrella stand stick to water, otherwise rust can not be used!

2. Prepare two fresh lemon and squeeze the juice.Then drip it on the rusty umbrella rack, wipe it gently, rub it a few more times until the rust is removed, and then wash it with soapy water.

Tips: This method is suitable for using a deep -colored Solar umbrella, because lemon juice will leave a faint yellow!

3. When using a Parasol, try not to use it when you sweat.If the Parasol is dipped in water, wipe it in time.It is best not to use a Parasol when it rains, because this will reduce its sunscreen effect!

Remember: Don't put it away immediately when you just use the Parasol. This will make the umbrella surface aging and crispy!

1. How to place the Flower stand

1. Porch partition

Modern families use soft partitions in the living room, restaurants, or porchs, but although soft partitions such as glass and bead curtains increase the indoor permeability, it will inevitably look monotonous.Therefore, the Flower stand was placed at the entrance at the porch to increase creativity and aesthetics.

2. Corner

Whether it is the corner of the door or in other corners of the living room, a retro -shaped iron Flower stand can be placed.

3. Under the wall wall

If the wall designed by the photo wall is blank, it is definitely the best choice to put a Flower stand.

4,Both sides of the TV Background wall

In addition to the above matching methods, the interior can also be placed on both sides of the TV Background wall. If the style of the Flower stand can be consistent with the TV background wallpaper wallpaper, the effect will be better.It is also possible to choose to place next to the sofa, but people often walk around the sofa, pay attention to safety.

Second, the living room Flower stand placed Feng Shui

1. Don't just right to the door

Try to avoid the appearance of the door when placing a Flower stand in the living room, otherwise it will easily lead to worse Feng Shui in the home, affecting the normal development of our normal life and fortune.

2. Don't place it at the aisle

When we are placing a Flower stand, we must also avoid placing the aisle, because there is a channel for the crowd, and if it is placed on the aisle, it is easy to scrape the flowers.

3. Do not have edges and corners in the Flower stand

When the Flower stand is placed in the living room, be careful not to have corners, because the living room is where there are many crowds. If the Flower stand with edges and corners is likely to scratch people and bring bloody disaster to the home.

What are the principles of Fountains?

Introduction to Fountain Principles

The principle of the Fountain is that the amount of mobility is conservative. From a large radius pipeline to a small radius pipeline, it generates a change of speed and rushes to the direction of the ground.The speed of the diameter is driven by the pump. The speed in the small radius is the original speed, which is transformed by the momentum conversion.You need to choose a micro -dollar to calculate the momentum conservation, so that you can find a speed. This speed is the exit speed, and then a toss of movement. This is an ideal situation. There is no friction and no wind.

Type of Fountain

In general, the Fountain landscape can be divided into two categories:

The first is to adapt to local conditions. According to the terrain structure at the scene, it is made from natural water scenery, such as: wall spring, Yongquan, Wuquan, Tube flow, streams, waterfalls, water curtains, water falls, water turtle, vortex, etc.

The second is to rely on the artificial landscape of Fountain equipment.This type of water scenery is widely used in the field of construction, with rapid development and a variety of types. There are music Fountains, program -controlled Fountains, swing Fountains, Running Fountains, bright Fountains, amusement fun Fountains, ultra -high Fountains, laser water curtain movies, etc.

Classification form

The Fountain is an artificial plastic surgery or a natural spring pond, which is sprayed with beautiful water positions for people to watch.The Fountain is an important part of the garden.In modern gardens, in addition to plant landscapes, Fountains are also important landscapes. It is both a kind of water scenery art, reflects the combination of movements and quietness, forming a bright and lively atmosphere, giving people a beautiful enjoyment. At the same time, the Fountain can also increase the air in the air.Negative ion content plays the role of purifying air, increasing air humidity, and reducing ambient temperature, so it is loved by people.There are many types of Fountains, which can be divided into the following.

(1) Ordinary decorative Fountain consists of various flower patterns to form a fixed Fountain.

(2) Combining Fountain Fountains and sculptures with sculpture form a landscape.

(3) Water sculpture is shaped by artificial and machinery to form a variety of large water pillars and forms landscapes.

(4) Self -control Fountain uses electronic technology to control water, light, sound, color, etc. according to the design program to form strange and changeable landscapes.

(5) In addition to the above types, there are also high Fountains, drought Fountains, stacking spring, music Fountain, Running spring, jumping Fountain, floating Fountain, sketch spring, Italian spring, music Running spring, etc., can also be formed by spraying to form by sprayingUnique water scenery.

The main form of water supply of Fountains is: DC water supply, water pump circulating water supply, and water supply of diving pumps.

The Fountain spray head is the main working part of the Fountain art modeling. Its role is to form a gorgeous water splash with a certain pressure of water with a certain pressure, spray it over the water surface.A variety of different nozzles configurations can create a variety of water scenery and landscapes, which are exciting and exciting and producing wonderful artistic effects.There are many types of Fountain spray heads. According to different structural forms, they can be divided into direct, rotating, water film, suction, atomization and other types.There are many types such as ice tower, open screen and spray nozzle.

With the application of light, electricity, sound, and automatic control devices on the Fountain, the emergence of music Fountains, intermittent Fountains, laser Fountains, etc. have enriched the content of the Fountain and enriched people's dual feelings in visual and hearing.The famous Fountains in the history of my country such as Beijing Yuanmingyuan Daishui Fountain Group, modern Fountains on both sides of Beijing Tiananmen, and temporary Fountains on the National Day Tiananmen Square are very magnificent, winning the praise and applause of Chinese and foreign tourists.

Fountain

The Fountain was originally a natural landscape, the ground appearing on the ground.The Fountains in the garden are generally decorated with decorative water spraying devices for landscaping.The Fountain can moisturize the surrounding air, reduce dust, and reduce the temperature.The fine water beads of the Fountain hit with air molecules, which can produce a large amount of negative oxygen ions.Therefore, Fountains are beneficial to improving the appearance of the city and the physical and mental health of residents.

Appreciation of the world's first Fountain picture

On the beautiful landscape of Canberra in the Australian capital.There is an artificial Fountain with the highest spray in the world.This Fountain was established by the Australian federal government in 1970 to commemorate Captain Cook for 200 years.Named "Captain Cook Memorial Fountain".

The spray port of the Fountain has 750 horsepower power and has two layers of water pumping systems.The Fountain has a spray speed of 200 kilometers per hour.The maximum jet limit is 150 meters.Looking at it from a distance, a water pillar on the lake was flushing the sky, the waves splashed, and they were spectacular and were become the world's first Fountain.