1. How to install the balcony anticorrosive wooden Flower stand

Although anticorrosive wood, anti -mildew, mildew, moisture -proof, insect -proof and other properties are prominent, and they have better durability.However, due to the special environment, if you pay attention to the correct installation method, it will greatly extend its service life.

1. Pay attention to leaving an extension joint when installing

When installing anticorrosive wooden Flower stand, the gap between 0.2 to 1cm of anticorrosive wooden Flower stand is generally determined by the water content of wood. When the water content of wood exceeds 30%, it should not exceed 0.8cm.The expansion of anticorrosive wood.In addition, anti -corrosion columns with a thickness of more than 50mm or more than 90mm can be opened on the back.

2. Select the hardware connection that is not easy to rust

The hardware is made of stainless steel, hot -dip galvanized or copper, which mainly avoids rust corrosion in the future and affects the connection fastness.Please drill in advance when connecting installation to avoid anti -corrosion wood cracking.

3. It is best to paint protective coatings after installation

The damaged part of the anticorrosive wood processing should be painted with preservatives and Outdoor protective coatings.Because the anticorrosive wood itself is a semi -finished product, the rough part can be reduced to less than 20%after the laying of the wood, and then the sand is light. If you want to have a better effect, you can also apply Outdoor protective coatings after cleaning the surface.

4. Pay attention to the protection of finished products

After painting the external protective coatings or oil -based coatings of anticorrosive wooden Flower stand, in order to achieve the best results, avoid people walking or heavy objects within 48 hours, so as not to destroy the protective membrane formed by the anti -anticorrosive wooden Flower rack surface layer.If you want to obtain a better anti -dirty effect, you can do two special Outdoor varnish treatment if necessary.

2. How to maintain the balcony anticorrosive wooden Flower stand

1. First of all, the anti -corruption wooden Flower stand should be laid in a suitable place. The unevenness of the terrain will affect its original structure. It can be solved by pads.

2. The Flower stand that receives rain outdoors will inevitably be continuously attacked, so it is regularly dried on the wood, so that the water that can enter the internal entry can be evaporated to avoid being destroyed in the internal structure.

3. Repair the damaged part, because if it is not repaired, it destroys the anticorrosive layer, then the rust and the internal damage of the metal accessories are possible.So a certain time must be corrected and checked.

4. Large -scale correction is necessary. It can be positioned once a year for paint or waxing.After a correction, the Flower stand is basically scrapped after waiting to be aging.

Interior micro -landscape plant production method

1. Golden pond

Shape a small ecological space for the little goldfishWhat's more?That's right, there are plants on the top, goldfish underneath, mutual harmony, benefiting each other, and more natural intimacy.

Materials: New Zealand leaves, ivy, green dill, waterweed, tree root, small goldfish

Production: When making, put the white stones first, and then bury the plants. Putting higher plants at the end, near the part of the water in the middle of the water, you can put in green dill and ivy and tree roots to create a natural barrier for the goldfish. Finally,Add water and put in goldfish and plants.Don't forget that the water needs to be placed for a few days before it can be used.

Second, country road

It is still a common green plant, coupled with houses and roosters, there is a scene of rural prosperity.

Materials: garden pine, net grasses, moss

Production: Put a layer of pottery on the bottom of the pot, then put it in the soil, and leave the shape of the path, plant the pine and mesh grasses in the partition, spread the stones on the path, and finally spread the moss and place it.House and rooster.

Third, the road to home

The driver rushed to the horse and quickly Mercedes on the way home. Although the scene was small, it was very touching.

Materials: pocket coconut, moss

Production: First lay a layer of pottery on the bottom of the basin, put it in the soil, and leave the shape of the path. The partition is planted on the pocket coconut, put on the stones on the small road, and finally spread the moss, and put the mud man's shape.

Fourth, life in the stone seam

One grass, one wood and a stone, all have life and are wonderful.

Materials: Qinglongcao, Stone, Wooden Film

Production: Put the soil into the container first, then plant the green dragon grass, and put a small stone in the gap that is still visible to the soil, that is, it is good.

5. Life in the stone seam

One grass, one wood and a stone, all have life and are wonderful.

Materials: Qinglongcao, Stone, Wooden Film

Production: Put the soil into the container first, then plant the green dragon grass, and put a small stone in the gap that is still visible to the soil, that is, it is good.

Six, dead wood Fengchun

Tree root itself is a containerWhat's more?Not only the house of moss, but also the lush source of evergreen vines.

Materials: ivy, moss, tree roots

Production: Choose the roots with holes, put in water moss, plant moss on one side, and plant ivy on the other side.Remember to keep the moss moist often.

Seven, the dream of idyllic

Two or two or more plants can choose plants with clear colors and different shapes.Just as the popular mixed -matching style is often more moving than a single.

Materials: Perilla, Netcover

Production: Put a layer of pottery on the bottom of the pot, then put it in the soil, plant the perilla and fix it, and then plant the net grasses next to it, and finally spread the moss.

Eight, Mountain Aoke

Choosing evergreen shrubs or small trees as a bonsai is undoubtedly a better choice. Then spread moss, and go to this green freezing cup of green tea to restore the calmness and clearness of a moment.

Materials: fragrant wood, moss

Production: First lay a layer of pottery on the bottom of the pot to achieve the action of breathable for the plant, then put it in the soil, plant the incense wood and fix it, and finally spread the moss, sprinkle with stones and stones.

How to maintain indoor micro -landscape plants

1,ventilation

After watering, we generally place the ecological bottle in a place with better ventilation, helping the plant's metabolism.

2, Astigmatism irradiation

Choose to make a micro -landscape ecological bottle, there are many yin -raw plants, such as some ferns.Try to avoid the sun exposure, or do not face the sun, you should put the ecological bottle in a bright environment and let it accept astigmatism.

3Watering regularly

The main force of the micro -landscape ecological bottle is moss, and moss likes a moist environment, so everyone pays attention to watering when the health bottle is not allowed to dry the soil.The soil is too dry, and moss will slowly decrease, but be careful that it would rather not be too wet, too wet, and moss will die.

4, Watering cannot be excessive

Watering should not be too much, ecological bottle is no more than Flower pots. When it is poured, it will rot, and moss will die completely. Therefore, when you find that the water of the ecological bottle has been hoarded, pay attention to remove it.This is a taboo for the breeding of the micro -landscape ecological bottle. It should be checked frequently to avoid stagnant water.

5, Don't use tap water

Many people use tap water when they raise micro -landscapes.There is also chlorine in tap water, which will inhibit the growth of moss.The tap water should be static, and the chlorine elements in the tap water are completely volatile before they are used for watering.

Some people say that using fish tank water, this makes sense. The fish tank water is also ecological water, which is good for plant growth.

Triangle Liuli lotus is also known as the triangle Yulu, which is the genus of Afu Flower Kaisa reedSucculent, Native to South Africa.The plant is short, and the plant height is generally 5-6 cm.The leaf -shaped leaf color is more beautiful and has a certain ornamental value.

Morphology

Perennial meat quality herbaceous plants, early plantsFor a single, it will gradually be in groups in the future.The meaty leaves are tightly arranged in a compact lotus seat. The leaves are meaty, which is relatively pointed, Emerald green, and a transparent or translucent window in the upper half.

Growth environment

It is particularly easy to group, and there are very few demand for sunshine, and it is easy to sunburn, so it is not appropriate to expose the sun.The increase in sunshine can be changed to red. It is advisable to breed under the condition of semi -overcast g of gitches. The root system is developed. The water demand for water during the spring and autumn growth period is slightly more demand for water. In summer, it is high -temperature dormant, and low temperature growth in winter needs to reduce watering.

Distribution

Native to South Africa and can be cultivated in many places in the world.

Breeding technology

Water

The spring and autumn are the long -term. During this period, the Delta glazed lotus demand for water is very large. We must water it frequently and keep the soil moist. Watering in summer and winter should follow the principle of "dry and transparent".

illumination

Triangular glazed lotus requires less light. If light for a long time, the color of the leaves will become red.Do not expose the sun in the hot summer, and it is easy to sunburn the leaves.Usually maintaining the environment can be half -yin, and in the astigmatism environment is conducive to growth.

soil

The root system of the triangle glazed lotus is developed, so it has a large demand for soil nutrients. It is best to choose sandy soil with breathability and good water permeability.

Fertilize

Fertilization before flowering: Triangle Liulian can apply phosphorus and Potassium fertilizer before flowering, promote the formation of buds, increase the amount of flowering, and provide the nutrients needed for plant growth.Apply 1 or two times a year, and if you apply some phosphorus Fertilizers properly, the color is more gorgeous.

Fertilization after flowering: After blooming, the nutrient consumption is too fast. It is necessary to properly supplement some Fertilizers to ensure that the plant's nutrients are sufficient to grow normally, and some rotten organic Fertilizers can be applied.

temperature

summer temperature: high temperature in summer, you need to cool down and strengthen ventilation.If the temperature exceeds 35 C, the plant needs to break the water.

winter temperature: When the temperature in winter is above 10 C, the plant can grow normally. When it is lower than 5 C, the pot soil should be kept dry. If the bottom end of the plant grows, frostbite will occur, and even dry death.

The cause of the yellow leaves

There are usually several cases:

1. Excessive watering causes pots of potting soil, hypoxia in the soil, rotten root system, and leaves start to turn yellow.

2. Watering too little, the evaporation of the water of the leaves is greater than absorbing, causing water supply in short supply, and it will also cause the leaves to yellow.

3. Excessive fertilization, especially when applying too much nitrogen fertilizer and lack of phosphorus and potassium Fertilizers, it is easy to cause the leaves to become yellow.

4. The light is too strong, and it is caused by the exposure, especially in the hot summer, to shade the Succulent plants appropriately to avoid exposure.

5. In addition, the lack of light and insufficient sunlight can also cause the leaves to become yellow. Of course, some leaves turn yellow is caused by the metabolism of the plant, which is normal.

Appropriate measures should be taken according to your own maintenance management.Do not water too much watering, do not cause potting of pot water. If there is a rotten root, you can cut the rotten roots, and then wash a root sterilization and disinfection with a multi -bacterial solution or potassium permanganate solution.During the high temperature in summer, the Shading measures should be taken. If it is caused by fertilization, the lack of Fertilizer can be planted into a new culture soil or using high -ingredient liquid Fertilizer to remedy.

Breeding method

Because it is particularly easy to grow, it is generally used in a division to reproduce.

Main value

The leaf -shaped leaf color is more beautiful and has a certain ornamental value; it can also be planted indoors to absorb substances such as formaldehyde and purify the air.

precautions for Triangle Liuli Lotus Breeding

1. Pay attention to light

If the triangular glazed lotus is insufficient, the plant will grow long, and the upper and lower distance between the leaves and leaves will be stretched, making the plant type loose, the redness of the leaves will also decrease, the leaf rod becomes tender, loses the value of ornamental value

2. Choose a basin injectionmeaning

When a novice can nourish the fat lotus, be sure to choose a basin with good breathability and water permeability. To avoid the accumulation of water stasis at the root, it is best to choose a basin with a drainage hole with a drainage hole at the bottom.

3. Pay attention to temperature

The entire plant grows slowly or completely at high temperature in summer. At this time, it must be ventilated and appropriately shaded to avoid exposure and watering.

4. Pay attention to water Fertilizer

When the temperature is too low in winter, you need to move into the indoor maintenance. Stop watering and fertilizing can be stopped below 5 C.Do not spray when watering in winter, because the water stays in Ye Xin for too long, which will rot the Ye Xin, so it must be poured directly to the root during watering.

The reason why wealthy bamboo leaves are yellow

1. Incorrect light

Rich bamboo is a green plant that requires light, but the sunlight is too strong to cause the leaves of the leaves to lose moisture, which becomes yellow and withered.The ideal lighting method of rich bamboo is semi -yin, that is, give appropriate shade when receiving sunlight, or plant planting in a light transmitted place, so that it is not easy to turn yellow.

2. Incorrect fertilization

Like many potted plants, rich bamboo needs to be fertilized to ensure sufficient nutrition.However, wealthy bamboo should not apply too much fertilization. Too much fertilization will reduce the absorption of water to the absorption of water, which will cause the leaves to become yellow and become rough, and the gloss will disappear.Therefore, fertilization should be appropriate. If you accidentally apply too much Fertilizer, you can use water to pour the Flower pot to dilute the Fertilizer.

3. Infection at the root

Some of the rich bamboo are hydroponic. If you do not change the water for a long time, it will cause rotten rotten.Sometimes when you see the rich bamboo leaves, you can check the roots. If you find that rotten, change the water and clean up the rotten roots, use cold water or pure water.If it is too serious, you can change the water and static for one night before changing the water, so that the chemicals can be wrapped off in the water, so that it can be solved.

4. Lack of oxygen

Any plant needs to be obtained by breathing, but if you often turn off the windows.As a result, the indoor air is very thin. The rich bamboo cannot absorb oxygen, and the natural breathing effect will slowly weaken, resulting in the inability to absorb organic components in the plant.As a result, the leaves of rich bamboo are slowly stunned, and then the leaves will slowly yellow, and then the leaves will begin to wither.Then your wealthy bamboo is not far from death.

5. Place

Under normal circumstances, wealthy bamboo should be placed on the balcony or something like some cabinets.But no matter what, you must remember firmly, don't put rich bamboo with those household appliances.Many people may be curious, why can't it be placed with domestic appliances.This is because household electrical appliances are prone to static electricity. Although not much harm to the human body, it is different for plants.The electrostatic electrical electrical electrical electrical electrical appliances may burn the leaves of rich bamboo. Once the leaves are burned, the leaves will slowly start yellowing.This will also lead to the death of wealthy bamboo.

What to do if wealthy bamboo leaves are yellow

1. Reasonable watering

The biggest cause of yellow leaves in rich bamboo is water. Too much water will exacerbate the phenomenon of yellow leaves.Excessive watering will fade the leaves of rich bamboo, gradually becoming yellow, and mainly occurs on the new leaves.At this time, we must remove the wealthy bamboo hair from the breeding ground. When the plants are dry and dry, and then put it back to the soil from the bottom, we can solve the yellow leaves well.If it is caused by too little watering, the edge of the leaves of rich bamboo gradually becomes yellow, and it has no effect on the growth of the new leaves. In this case, as long as you water it in time.

2. Control light

Rich bamboo is happy. If the wealth bamboo is in an environment where a strong light is in a strong light during the breeding process, it will easily lead to yellowing of wealthy bamboo leaves.However, if there is no light for a long time, the chlorophyll of the leaves will not be formed in time. This will naturally make the leaves yellow, and in severe cases, the leaves will fall.Therefore, in the process of breeding, we must control the light around the wealthy bamboo.Neither can it be directly shot by strong light for a long time, but it must also accept the sun appropriately.

3. Appropriate fertilization

All crops are inseparable from nutrition during the growth process, so of course, rich and rich bamboo is no exception.In order to promote the rich growth of wealthy bamboo, increase the value of ornamental, and further expand its breeding benefits.Unlimited fertilization can make the leaves yellow, the top of the new leaves is yellow -brown, and the old leaves are yellow.Natural Fertilizer should not be too small, too little will cause malnutrition of the leaves.Chlorophyll secretes too little, causing the leaves to become yellow.Therefore, it is necessary to appropriately apply fertilization according to the growth of rich bamboo, rather than blind fertilization, and a good fertilization method can maximize the benefits of breeding.

4. Pruning blades

In the process of wealthy bamboo breeding, due to the role of metabolism, the growth of the leaves will continue. The number of leaves should be observed. When the number of leaves is too large, the old leaves should be cut off in time.To prevent the leaves from being too lush and affecting each other, the light is uneven, resulting in yellowing of the leaves.When trimming the leaves, pay attention to light trimming to prevent the bamboo stems of rich bamboo from being damaged when cutting the leaves.Otherwise, the wealthy bamboo wound infection can easily cause a variety of pests and insect pests, increase the mortality rate of rich bamboo, and reduce its own breeding economic benefits.

Disclaimer: The above content is derived from the provision of the program system index or the sharing of netizens. It is for your reference only and does not represent the research perspective of this website. Please pay attention to the authenticity and authority of the source of the content of the content.Apply to delete & gt; & gt;Correction & gt; & gt;

Leafmu bonsai production and maintenance

The leaf wood bonsai is made of beautiful tree -shaped shape, dense branches and leaves, strange leaf -shaped, and varied leaf color, which highlights a type of bonsai with leaf -viewing effects.Commonly used materials are red maple, chicken feet, triangle maple, Wei spear, waves of winter green, ten major contributions, ginkgo, wolf Bone, Soviet iron, brown bamboo, phoenix and other tree species.This kind of bonsai not only watchs leaves, but also has other ornamental effects.But with the bright and pleasant leaf color and the novel leaf shape of Yamei.The leaf wood bonsai has evergreen trees, which are evergreen in the four seasons and can be seen all year round.There are also deciduous trees. With the changes in the seasons, different colors are present. Although the cold winter leaves fall, they can still watch their cold trees.

How to make in the leafmill bonsai

1 , Choose tree species and cultivate :In addition to the cultivation of gardens in the cultivation of the leaf wooden basin, the sapling in the wild is one of the important sources of solution to the setting of the stump pelvis. Many masterpieces of masterpieces come from this.In the barren mountain slope or stone seams of the barren mountains, beside the road, beside the water, stone shore, and Chai Mountain forest, the normal plants grow in poor growth, and you can see it in the trees with beautiful attitudes and suitable for making landscapes.Processing.Of course, the tree species of the leaf wood bonsai can also be sowed through all kinds of seeds, cuttings, and seedlings, and then processing and cultivation. However, this method is relatively long.

2 planting the pot:The collection of leaf wood bonsai raw materials or seedlings need to be put on the pot first.The soil of leaf wood bonsai can generally use mountain rotten soil and then mix with river sand, or can be mixed with cypress rotten leaf soil plus river sand;The garden soil is mixed with a valley bran.

The time of leafmu bonsai is generally in the spring of each year2 Arrived in the end of the month 4 In the end of the month, if it is autumn leafmu bonsai upper pot can be in the year 10 To mid -month 11 During the moon.

The pots used in the leafmu bonsai can use different pots according to different bonsai, such as using porcelain pots, like a cliff -like bonsai can use the purple mud basin with a smaller basin.Shallow pot.

Pay attention to the position of the basin and the art effect of the bonsai in the pelvis of the leaf wood bonsai. If it is a garden basin, generally do not plant the leaf wood bonsai in the middle of the basin. It can be slightly a little bit, and the artistic effect is better.

The shape of the leaf wood bonsai is dominated by the trunk. The underneath of the general trunk is thick, and the top will gradually become thinner.

3 , Leafmu bonsai processing and finishing:After the pelvis of the leaf wood bonsai, some processing treatment is needed, so that the shape of the leaf wood bonsai will be more beautiful.Some of the processing methods that can be used are dry, peeling, carving, climbing, tearing and other methods.

How to raise leaf wood bonsai

Five taboos of leaf wood bonsai maintenance

1. Avoid soaking water

Long -term excessive watering can easily cause plants to flow into the soil due to dialysis, causing the plant to wither or even die.Like elm tree, golden bird, wolf Bone, simple tree, Yang Yang, etc. need special attention.

Second, avoid acid and alkali soil

my country takes the Huaihe River as the boundary,, Northern alkaline ,, Nando acidity, mountains and soil are acidic ,, Plain is alkaline.

The southern acid soil can be adjusted with soda or lime. The northern alkali soil can apply acidic Fertilizer or multi -use farm organic Organic fertilizer.

Three, avoid "Move the pot"

Each plant has a specific transplantation time, such as Chinan and Wolver Bone Avoid autumn Movement,, Peony avoid spring movement.

Fourth, avoid excessive trimming

In order to survive the survival of transplanting and trimming, the pruning and blades will be trimmed. There is no problem in common sense.But like pine and cypress plants, if over -pruning, it will affect the germination of the new buds.

5. Avoid sterilization at will

Su Tie, pine cypress are avoided"Potassium permanganate" and "Bacteria Clear", remember!

Morphological maintenance, trimming

Generally speaking, the trees are stronger, the growth is strong, and the growth is less cut.From the needs of the trees, it is usually cut off the cluttered cross -branch, overlapping branches, parallel branches, round branches, raw branches, thin branches, pathogenic branches, etc.The nutrient concentration of the branches can grow strong.

1 Pruning time

Miscellaneous wooden bonsai can be trimmed all year round, and pine and cypress should be trimmed in the dormant season.

In the rainy season, there are many rainwater, the air humidity is large, and the trees grow strong. It should be cut less. A large number of branches and leaves are cut off will affect normal growth.In addition, the end of the autumn should not be cut again, and the cold current will freeze to death.

The best time for re -cutting and strong cutting is1-2 The trees are in the dormant period.However, some cold -resistant trees should not be trimmed in winter, because the wound is difficult to heal, it is easy to leave scars.

2 Subcer

Tree species with strong buds in the bonsai are germinated and fast in the growth season. It should erase the root buds, dry buds and axillary buds in time.At the same time, pay attention to retain the direction, location and density of the bud.In order to avoid germination of fork branches, raw branches and overlapping branches, affecting the aesthetics of the tree.

3 top

The new shooting head of the tree growth period not only suppresss the new shoots, and promotes the growth of the side branches to maintain the beauty of the tree -shaped posture.The top -up time is different due to the different period of germination of different trees.Leaf and wooden bonsai, when the new leaves are expanded2-4 You can get topped when the film.Flower and fruit bonsai should be flexibly grasped according to different flower and fruit periods (topping can promote flowering).

4 Leaf

Proper leaf picking can reduce the leaves and promote new buds again to increase the ornamental value of bonsai.The time for picking the leaves is different from the tree species. The leaves can be picked in early summer or early autumn, and the evergreen trees should not be picked.During the period of picking the leaves, the water should be appropriately deducted. The pot soil should not be too tide. In addition, it should often apply rotten cake Fertilizer water to strengthen ventilation and light to promote the germinated new leaves.