1. The Law of the summer Beach scarf

The Beach towel can be worn on the body. Although it is just a bath towel, it has a stylish pattern on it, and the size is large enough. It is very good to wear it as a shawl or sunscreen.There are many laws of beach towels, for example::

1. beach towels can be used as a jacket or shawl directly, just put on your body or on your shoulders. This method of wear is more daily.

2. Put the Beach towel from front to or back, and then go forward, then hit a knot, you can act as a skirt, generally a single -layer system. If the Beach towel is large, you can also have a double -layer department.

3. Put the Beach towel behind the back, then pass through the two corners of the longest one side of the Beach towel from the armpit, tie a knot on the chest, and then tie the two ears behind this.It became a sloping skirt, cool and beautiful.

4. Hang the Beach towel around the neck, pinch your two ends with your hands, then go around the back, and then wrap the leftovers to the front tie, and just sort it.

5. First, go behind the Beach towel, pinch your two ends, and hit a live buckle. After tie it, hang it on the neck.

6. Siege the Beach towel to the chest, tie a buckle, grab the two bands that are tied to the good buttons, put it on the chest and continue to be deducted, and you can hit a bow.Deduction, make a long skirt with a Hanging neck.

There are many methods and matching of beach towels, so how can the Beach towel look better?

2. How is the Beach towel look good

The size of the Beach towel is generally large, suitable for wearing clothes on the body, and the beach towels on the market are colorful, rich in patterns, diverse styles, and the decorative effects are quite good. If you want to make the Beach towel look good, it is mainly necessaryPay attention to two aspects:

1. Choose the right pattern and color. The pattern of the Beach towel is many color. The beach towels of different shapes can show different decorative effects.

2. In the process of the system, choose the correct direction and the landscape pattern to be displayed, so as to make the decorative effect of the Beach towel better.

There are more than one method of the Beach towel. The same Beach towel can be matched with different shapes with different ties. If you are too lazy to get it, you can put it directly on your shoulders and the decorative effect is good. Or buy a geometric shape.The Beach towel of the pattern can be tied at will, because the geometric pattern can construct different patterns and shapes, which is more casual.

1. Is it useful for the windshield of the car?

Vehicle windshield Shading cloth is commonly known as car shade gear. It can reduce the temperature in the car to a certain extent and protect the instrumental seat equipment in the car, which has a certain effect.The material of the Shading is basically made of aluminum foil and multi -layer air bubble film. The bubble film has good strength, toughness, and anti -impact performance.Aluminum foil has reflected light, which reduces heat radiation and has low thermal radiation conduction capabilities.The sun is shot on the obstruction, and some of the heat will be blocked, and the ultraviolet rays will be reflected by aluminum foil.

The car shade gear can avoid the damage of the leather seats and the instrument board. The direct sun exposure of the sun will make the temperature in the car up to 70 degrees. Not only is the center console shell easily deform, but the instrument and other equipment on the dashboard are also due to the reason.High temperature damage, such as aging components, pins, welding, etc., can effectively avoid direct sunlight.

Second, what are the types of car Shading?

1. Follow -ups

There are not many varieties of the front oblong. There are generally two types of aluminum foil and non -woven fabrics.The general "light board" type and pattern type of aluminum foil are generally 60*130cm in size, suitable for most small cars.The aluminum foil and thermal insulation with suction cups are easy to use. After expanding, use a suction cup to suck it in the front windshield or in the rear window glass.

2. Rear Shading

The rear sunrise is generally prepared for the guests. Some high -end vehicles are the original configuration.The rear Shading gear.

3. Side Shading

When driving in summer, the sunlight from the side window is still very powerful.The effective film effect is not very ideal. It will still be hot and hot, and the sideways have a good effect.The side Shading gear is divided into two types: ordinary gauze net and electrostatic stickers. The ordinary gauze -net sideways generally have two suction cups. The advantage is that it is more convenient to remove it. The disadvantage is that it is easy to fall.The static sticker side shade gear has a good effect, which can be pasted directly on the glass and can be reused.

Third, which car shade gear is better

1. The choice of car Shading board material

At present, the most on the market is the material of the aluminum film PVC. The effective reflection light of the aluminum film and the internal PVC bubbles effectively isolate the heat of thermal energy can the heat insulation and cooling effect.Therefore, the size of the aluminum film and the thickness of the PVC material determine the effect of use.When buying this kind of Shading, it is best to choose a model with suction cups. Although it will work more when it is placed, it is easier to fall from the inside of the glass.EssenceIt is recommended that you choose as much as possible when buying as much as possible. The effect is definitely better than ordinary ones.

2. Selection of the color of the car shadeboard

Different colors have different reflections and reflections on light, whether it is front or side gear.Black, red, and some warm colors are not recommended. Black is the most hot.The coolness of warm colors in visual and sensory is also greatly reduced.It is recommended to use the color of blue, green and white.Different Shading effects of car sunboard are also different.

3. Use the car shade board before and after

Many times the riders will cover the side when they look at the sun, so the effect of Shading is also reduced by 40%.It is not just the side of light to increase the temperature. The reflection of light is everywhere. If it is used with a side gear, the effect will be better.The choice of car aphrodisiac material has the most direct relationship with the sunshade effect.

[Umbrella Bone] What can I repair the umbrella Bone?

What material is good for the umbrella Bone

With the development of technology.The umbrella has also changed. From the previous oil paper umbrellas to the umbrellas that are now many.With the changes in the umbrella surface, the umbrella Bone has also changed. Most of the previous umbrella bones were wood and bamboo umbrella bones. Later, iron bones, steel bones, aluminum alloy bones (also known as fiber Bone), electric Bone and resinbone.

1 Advantages of aluminum Bone:Light weight and cheap price.

2 The advantages of chemical fiber Bone:Light weight and strong wind resistance.

3 Advantages of carbon fiber Bone:Light weight.Disadvantages: Wind resistance is average, and the price is the most expensive among all materials.

4 Advantage of wood Bone:Traditional Chinese umbrellas are often used.

5 The advantage of iron Bone:Strong and durable, the price is slightly more expensive than aluminum Bone.

How to repair the umbrella Bone

The place where the dark umbrella is easy to break is a small hat on the side. Those small hats are facing the steel skeleton on the inside, because the wind blows the skeleton folding and the hat eyes are loose.In this case, the solution is to find a little thin fabric or plastic, and tighten the hat eye and steel strip together tightly.In this way, umbrellas can be continued.

The skeleton steel bar of the Yulu umbrella is broken. This is also a common situation. When this happens, there will be one or multiple faces when the umbrella is opened.In this case, the solution is to find a pliers. It is best to use a pointed clamping and it will be more convenient, as well as iron wire.Observe carefully and find the iron hat that connects the disadvantages of the connection and replace it with a wire.Tighten it with pliers, and note that the head of the iron wire is screwed with an umbrella to scrape the umbrella surface.

There is also a situation that the position of the contraction card of the Umbrella is broken.After the umbrella is opened, I can't hold it automatically.You can't always push an umbrella with your hands!In this case, it is generally necessary to use a knife such as a fruit knife.The card position when it is opened is flattened, because the total use, as well as the damage of the wind, make the card position uneven and round, and the card can't hold the umbrella.Use a knife to flatten the plastic card position to solve it.The general problems with these methods can be solved.

In addition to the above situations that need to be repaired, the Yellow Umbrella needs to be maintained: the winding wire bending of the umbrella Bone is easy to cause the wire Bone, which can directly pull the iron wire with the hand to avoid the rivet falling off or the umbrella cloth pierced; in the umbrella in the umbrella;The handle is rusty, which is easy to cause the opening and closing. Use a small screw or the toothpick to dip the lubricant to drop the middle handle joint, and then open it several times.The structure is so simple.No matter how big the problem is, there is no need to repair it again.

I believe that after watching the common faults and maintenance of the Yulu umbrella, you can get some maintenance tips.Umbrellas can not only shade the rain, but also shrink and easy to carry.For students, it is the most reliable to prepare an umbrella in a schoolbag.However, after using the umbrella on a rainy day, be sure to remember to dry it before receiving it. In this way, the umbrella handle of the umbrella will not be so easy to rust.Essence

When should I use a sunshine?

1. The indoor (outside) temperature reaches or exceeds 29 C.

2. Solar radiation intensity & gt; 240kcal/m2 h (1004.6kj/m2 h).

3. The depth & gt; 0.5m in the sunlight.

4. The inner time of the sunlight is more than 1h.

What are the main points of sunshade shed?

1. The Shading cannon is suitable for Shading outside the doors and windows of low -rise and multi -storey buildings, and should not be used outside the high -rise building.

2. The material, thickness, specifications and forms of Shading materials, the form and specifications of the fixed device, the power of the motor (when using the electric), the wind pressure of the use of the place is related to each other., Ask professional manufacturers to obtain relevant technical information, and choose after comprehensive consideration.

3. The connection practices of the Shading system and the building subject, lightning protection measures, etc. involving safety issues must be determined and responsible for the engineering design personnel based on the specific engineering situation.

4. Anyone with a long -choir of rolling boxes should consider the impact of placing different locations on the energy saving of the wall.

5. For systems that are equipped with automatic control, generally requirement of risk control and rain control induction device, light control can be selected according to specific conditions.Manual driving method is generally not suitable for Shading that often unmanned places.

6.The fabric is recommended to use dark (or the dark surface of the fabric faces the Outdoor) to achieve a better Shading effect.

The requirements for the fabrics of the sunshade

Types of fabrics: polyester coating fabric, glass fiber coating fabric.

1. The fabric should ensure that the size is constant and non -deformation.

2. The surface of the fabric is Smooth and Smooth to ensure the collection of rolls freely, and prevent the fabric from Running off, wrinkles, or unsatisfactory scrolls.

3. The fabric should have sufficient tensile and tear resistance to prevent the risk of being torn under harsh climate conditions.

4. The connection between the fabric should be a hinge -frequency welding process to ensure that the fabric has sufficient strength.

5. The fabric should ensure good color solidity.

6. The surface of the fabric should have a certain anti -pollution performance, easy to clean, and simple and convenient maintenance.

What is the difference between sunshade and sunshade

1. First of all, in terms of shape, the shade pim was like an umbrella, with a small shape and less places that can be covered.The Shading shed is large, and there are more parts that can cover the sun.

2. Secondly, in terms of usage, sunshade is generally used by the beach or swimming pool, suitable for individual Shading.The sunshade is generally applicable to the Shading of propaganda activities such as stalls and places, and it is suitable for collective Shading for collective and more people.

3. In the end, the sunshade generally requires four brackets to support it, and the transportation is cumbersome. Unless there are large activities, it is generally not used.The sunshade can be opened directly, which is more practical in daily life.

1. The difference between linked curtains and punching

1. Applicable place

Pole curtains are generally suitable for large -area windows, such as to separate the living room from the balcony.If it is a floor -to -ceiling window, it is also very suitable for using punching curtains.The linked curtains are generally used for four -claw hook and S hook. If this curtain is suitable, all occasions are suitable, but many people still use it in the bedroom.

2. Disassemble

The curtains also need to be disassembled regularly, because long -term suspension, a lot of dust will fall on it.In terms of disassembling and washing, punching curtains are easier to disassemble. Take the curtains and Hanging rods together, and then take the curtains from the pole.The linked curtains will be more troublesome if it is removed, because it is necessary to remove all the hooks before being washed.After cleaning, when Hanging, it is also very time -consuming to install these hooks and reinstall it.Relatively speaking, the hook cleaning and installation are more troublesome, and the punching curtains should be much easier.However, when cleaning, the thickness of the hole curtains is thicker, and the difficulty of cleaning has increased a lot.The hook curtains should be thinner, not so difficult to clean.

3. Beautiful

Generally speaking, the prices of punching curtains are more expensive.The overall feeling of the punching curtains is very good, and it looks very atmospheric.Overall, punching curtains should be more beautiful and stronger, and can enhance the sense of grade of space.The overall sense of the linked curtain is not so good, and the price is relatively cheaper.Although the hook can determine the amplitude of the curtain folds, it is still a bit inferior.

4. installation method

There are still obvious gaps in the installation method of linked and punching curtains. The hook requires you to calculate the distance measurement in advance.Then you need to adjust the number of inserted pins into the slot. Generally, there are 3-4.After that, you need to consider the number of caves in the middle, which is more troublesome.The installation method is very simple in installation. You only need to put on the hole of the curtain into the pole at one time.

Pole -and -hook curtains have their own benefits. Good or bad depends on personal preferences.They have their own advantages and disadvantages. When choosing, they can choose according to the place to be installed and the decoration style they designed.

2. How to install the hook curtains

1. installation of the top seat

After the location of the curtain linked is determined, take the drill drilling hole. After the drill is drilled, the expansion screws are fixed to the four top seats (if the pole grows greater than the conventional size, this length is adjusted accordingly).

2. Install the curtain ring corner

The curtain linked angle can be installed on the top of the balcony or the top of the wall, and the corner is 50--70cm from the top seat of the activity. It is necessary to form a triangle (45 degree angle) and the position of the shaking hands in the middle of the top seat to maintain the same vertical line.

3. Steel wire connection

A set of curtains contains two steel wires. Take out one first. First, the end of the steel wire through the corner bearing wire groove, and then pass through the active wheel bearing wire slot on the top seat, and then pass through the fixed top top seat.The bearing wire groove makes the wire vertically on the ground, and then puts the top cover from the wire to the top cover.The other end of the steel wire is the same.Another steel wire installation method is the same as root.

4. Curtain rod connection

At the end of each steel wire, wear a Hanging ball and knots in the Hanging ball; then pull the Hanging ball until the top seat is held.On the side of the shake; relax the steel wire in the hand shake, the Hanging ball drops, pass the curtain rod through the Hanging ball, and then tighten and fix it at the position of the Hanging of the Hanging ball, nail the screw;Cover.In this way, the installation of the curtains is successful.

3. precautions for the installation of curtains

1. When installing the curtain hook, the distance between the hooks should be as uniform as possible, and the calculation is calculated first.

2. Pay attention to the rusty hook, you should change it immediately to avoid polluting the curtain cloth.

3. In actual use, you can adjust the number of inserted pounds, 3, or 4; you can adjust the number of Hanging grooves between the interval between each two hooks, so that the effective width of the curtain can be adjusted.