1. Is it better to hook the towel or be a rod?

Each has its own advantages. For example, a towel hook can be lined up with a few towels. Each towel does not take up a lot of positions, but it is not conducive to the dryness of the towel. If it is humid for a long time, the towel is easy to mold.For towel rods, you can flatten the towels, which is conducive to the drying of the towel. The towel rods take up space. The drying towels are too small. Consumers can choose according to their own needsEssence

two,Where to put a towel hook

1. Hanging on the side of the washbasin

Because peoples living habits are mostly placed on the side of the washbasin, the towels are best Hanging on the side wall of the washbasin in order to facilitate the use of the sideline.Install some towel hangers, especially for the main guards, if it is a bathroom used by two people, this is a very convenient method.

2. Behind the door

Because the door is not ventilated, in fact, many people do not like to put the towels on it. They may not be easy to dry because they are not ventilated. They can be installed and hooking at the back of the door to facilitate the use of the family for a long time.

3. The wall of the bathroom

Because the towels and wiping towels are some relatively small towels, and bath towels are usually relatively large, so we need to use a strong load -bearing capacity to put it near the white wall of the shower room.It will be more convenient when taking a bath.

4. The door of the bathroom

You can hang the towel on the handle of the bathroom door. The sliding door inside the towel Hanging the bath, and the handle of the sliding door on the outside. Although this method does not look beautiful, it is convenient.

1. What should I do if the fabric of the skiper is dyed

1. salt water soaking method

Salt water has a strong solid color, so salt water can be used to deal with dyeing problems.The specific operation steps are as follows:

(1) Prepare a pot of warm water and add an appropriate amount of salt, which is about 30 grams of salt added to each liter of water.

(2) Soak the dyeing area and soak in salt water. The time is generally 1 to 2 hours.

(3) Rinse with water after removing, you can add a small amount of salt to the final fixing treatment again.

2. Washing method of bleaching agent

Sometimes the stains and heterosexual dyes on the Ski clothing fabric are stubborn, and bleach can be used for cleaning.The operation steps are as follows:

(1) Mix the bleach and water according to the proportion of indications.

(2) Soak the staining area in the mixed fluid, the time is generally 10 to 20 minutes.

(3) Rinse with water after removing, repeatedly repeatedly until there is no odor.

3. Special dyeing agent treatment

If the above method cannot effectively handle the problem of dyeing, you can try to use a special chroma for treatment.The operation steps are as follows:

(1) Select the dyeing agent suitable for fabric materials.

(2) Mix the dyeing agent with water according to the instructions of use, and stir well in proportion.

(3) Soak the dyeing area in the mixture, the time depends on the situation, and the adjustment can be made as needed.

(4) Rinse it with water after removing it to avoid residual dyeing agent.

It should be noted that different fabrics and dyeing reasons need to be treated with different treatment methods.If you are not sure about the specific situation, it is best to consult the opinions of professionals to avoid incorrectly damaging clothing.

2. How to clean the skiing clothing fabric

1. Follow the cleaning instructions

Ski clothing fabrics are usually brought with cleaning instructions, which are formulated based on specific fabrics and technology.Read and follow these descriptions to ensure the correctness of cleaning.

2. Do not use laundry powder

If you can't find a cleaning instructions, you can refer to the following suggestions: cleaning with a small amount of neutral laundry solution to avoid using laundry powder, or any products containing bleach, decontamination agent, and softener component.Because the chemical components in these detergents may damage the waterproof performance of the skiwear, and it may also damage the color and texture of the fabric.

3. It is recommended to use a professional skiper cleaning agent

In order to ensure that it does not damage the waterproof coating and fabrics, it is recommended to use a cleaning agent for skiing clothes.These cleaning agents are usually mild and effective, can remove dirt and protect waterproof performance.

4. Avoid strong mechanical cleaning

(1) Hand washing: If the Ski clothing is only cleaned in small areas, it is recommended to use a soft brush or sponge. Wipe it gently with the cleaner, and wash it with your hands, but do not rub and wire.

(2) Machine washing: It is also possible to wash it in the washing machine, but to avoid using strong mechanical cleaning. It is recommended to use a roller washing machine to choose a gentle mode to avoid excessive friction to the Ski clothing.

5. Choose appropriate water temperature

Wash water temperature: 30-40 degrees temperature water.

6. Avoid sunlight exposure

(1) Take natural drying and avoid sun exposure, suitable for most Ski clothing fabrics.

(2) If the dryer is used, please adjust to a gentle and soft speed drying. After drying, dry for 20 minutes to activate the water -proof (DWR) effect of the surface.Once the water splashing is found to be improved, this operation can be performed at any time.

(3) If an iron is used, set the iron at low temperature and does not use steam, and place a piece of cloth on the Ski clothing and cook.This can help the splashing effect of the surface cloth on the surface of the clothing.

1. How much is a lady's Beach towel?

Beach towel is a towel used when playing beach and beaches. It is often used for playing Outdoor beaches, wiping the body, covering the body after exercise, or laying on the beach. The Beach towel is very practical. Therefore, many friends who plan to go to the beach vacation areWant to buy a Beach towel, especially female friends, and buy a beautiful Beach towel can also become a beautiful landscape line to attract attention. How much is the Beach towel?

The price of the Beach towel is not uniform. It only takes a dozen twenty yuan for cheap, and there are more than 100 yuan. The specific price mainly depends on the brand, material, production process, size and other factors of the Beach towel.You can buy beach towels in large supermarkets or outdoor products stores, or you can buy it online, but many friends do nt know how to choose the Beach towel. Here are the selection strategies for beach towels.

2. How to buy a good Beach towel

The Beach towel can wipe the water on the body. As a rest lying cushion, it can also play a sunscreen. It can be described as a lot of use, but there are many different categories of beach towels. How to choose the Beach towel?

1. Select material

beach towels are made of pure cotton, polyester fiber material, mulberry silk materials, etc. The general Beach towel is made of cotton, which is more comfortable and the price is low.

2. Select color

The color and patterns of the Beach towel are relatively abundant, but there are also choices of solid color beach towels. The solid color Beach towel has only one color, very simple, and it looks very refreshing.The towel is also very eye -catching.

3. Selection size

beach towels are usually relatively large. This is designed to facilitate laying on the beach, but it is not convenient to carry on the Beach towel, it is not easy to wear on the body, and the price will be more expensive. ThereforeSelect the size of the body, so that it can be tied to the Beach towel at any time on the beach, which is more convenient.

One more thing to note is that after all, the Beach towel is directly exposed to the body. If you buy it, it is best to go to the offline physical store to try it to see if it is comfortable to avoid buying difficult products.

1. Is there a shelf life?

There is a shelf life of the alarm. If a Positive umbrella is used normally, it can be used for 2-3 years.The sun umbrella is baptized in the sun every day. Over time, the materials will have a certain wear. Once the sunscreen coating is worn and damaged, the effect of sunscreen will be greatly reduced.If the rain is rained in the middle, the sunscreen coating of the Parasol will be aging faster.After 2-3 years, the Parasol can also be used as an umbrella.

2. How to maintain a sun umbrella

1. The main function of the Solar umbrella is to block the ultraviolet rays. The fabric of the Solar umbrella is very fine and contains small particles, so it is best not to use a brush to brush, just wipe it with water or wet towel.Dry the ventilation place, (it is best not to put it under the sun) and wait for drying, then gently remove the soil, then wash it with detergent, and then rinse with water and dry it.

Remember: Do not brush it hard with a brush, otherwise it is easy to break after drying!And don't let the umbrella stand stick to water, otherwise rust can not be used!

2. Prepare two fresh lemon and squeeze the juice.Then drip it on the rusty umbrella rack, wipe it gently, rub it a few more times until the rust is removed, and then wash it with soapy water.

Tips: This method is suitable for using a deep -colored Solar umbrella, because lemon juice will leave a faint yellow!

3. When using a Parasol, try not to use it when you sweat.If the Parasol is dipped in water, wipe it in time.It is best not to use a Parasol when it rains, because this will reduce its sunscreen effect!

Remember: Don't put it away immediately when you just use the Parasol. This will make the umbrella surface aging and crispy!

[Smooth Clover] The advantages of the role of Shading on the roof

When it comes to shutters, it is easy to think of high -tech buildings exposed to structures, mechanical and electrical parts, and talk about the relationship between architecture and structure.The louver is expanded in a horizontal way, and the level of the louver group is expanded: the facade factor of the building constitutes a pure horizontal line.The staggered arrangement of the Closs Group: There are such louver layout in residential and public construction.Make the facade lively and angry.The vertical expansion of the shutter group: The louver group is unfolded in the vertical direction to form a tall vertical line.

According to the requirements of different environments, sunshade louver is used to limit the effects of direct radiation, scattered radiation, and environmental surface reflection radiation on indoor temperature and light through the design of different environments.

The shutters are relatively wide, which are generally used for indoor and Outdoor Shading and ventilation.Now more and more people's recognition of the shutters have also evolved from the shutters.Blossom curtain wall has many functions, and it is very beautiful. It is generally used in high -rise buildings.The Shading louver curtain has good ventilation and ventilation and breathable indoor light intensity, especially suitable for simple and bright indoor space.Plastic aluminum shutters are favored by consumers because they are not easy to fade, do not deform, and have good thermal insulation.

The advantage of the new type of Shading louver is that when the shaft is rotated, the rotation of the flip wheel fixed on it, thereby driving the leaves of the louver window to rotate. Because the turning wheel is limited by the two directions of the base, the leaves of the louver window are not rotated after rotating in place to avoidThe leaves are over -turned over.The structure of the entire blade flip mechanism is simple and easy to make.

The characteristics and advantages of the roof Shading of louver

The roof Shading louver is mainly used for regulating the sun, and it is a very important decorative component on the top of the building.Blossoms are on the top: Blossom as a form of roof.The roof is pretty better.

When it comes to shutter, it is easy to think of those high -tech buildings that expose the structure, mechanical and electrical parts, and talk about the relationship between architecture and structure.The louver is expanded in a horizontal way, and the level of the louver group is expanded: the facade factor of the building constitutes a pure horizontal line.The staggered arrangement of the Closs Group: There are such louver layout in residential and public construction.Make the facade lively and angry.The vertical expansion of the shutter group: The louver group is unfolded in the vertical direction to form a tall vertical line.

According to the requirements of different environments, sunshade louver is used to limit the effects of direct radiation, scattered radiation, and environmental surface reflection radiation on indoor temperature and light through the design of different environments.

The shutters are relatively wide, which are generally used for indoor and Outdoor Shading and ventilation.Now more and more people's recognition of the shutters have also evolved from the shutters.Blossom curtain wall has many functions, and it is very beautiful. It is generally used in high -rise buildings.The Shading louver curtain has good ventilation and ventilation and breathable indoor light intensity, especially suitable for simple and bright indoor space.Plastic aluminum shutters are favored by consumers because they are not easy to fade, do not deform, and have good thermal insulation.

The advantage of the new type of Shading louver is that when the shaft is rotated, the rotation of the flip wheel fixed on it, thereby driving the leaves of the louver window to rotate. Because the turning wheel is limited by the two directions of the base, the leaves of the louver window are not rotated after rotating in place to avoidThe leaves are over -turned over.The structure of the entire blade flip mechanism is simple and easy to make.

The role of the roof Shading louver:

1. Shading, lighting, Shading and energy, cooling, energy saving, environmental protection.

2. Comfortability: comfortable body sensation, comfortable temperature, visual comfort, adaptation comfort; decorative; privacy; protective effect on the surface of the building.

Character characteristics:

1. Good rotation light and visual enjoyment of modern flow sense;

2. The surface of the blades is bright, the edge is designed, and the Shading rate is as high as 98%;

3. Wide moisture -proof is not moldy and can be placed in a humid environment;

4. Made of anti -UV material, indoor energy conservation is more effective;

5. Do not contain formaldehyde, waterproof and insulation, do not help, do not refund, and do not deform heat resistance.

Advantages of roof Shading louver:

1. Outside the building shade function: Ventilation shutters can be effectively deducted from the sunlight of the sunlight to indoor radiation energy, which can achieve the effect of reducing room temperature in summer.At the same time, the intensity is good and it is not easy to be destroyed.By adjusting the angle of the opening of ventilation shutters, the indoor can not only control the angle of light, but also increase security. The hidden effect is relatively good.

2. Large buildings high windows, large -scale exhaust: ventilation louver window configuration electric opening equipment can effectively solve the plant.It is difficult to open the window of the location, the requirements for ventilation.When all start (90 degrees) ventilation reaches 99%, excellent ventilation function: It can also be ventilated on rainy days.There is no need to consider the problem of raining or anti -theft after opening the window.Civilized Shading anti -theft, universal types of various places: smoke and ventilation of the plant.The external facades of the building, the setting of typhoons, and the improvement of ventilation settings, the school's protection settings can be through different settings of ventilated shutters.