garden landscape design explanation interpretation

1. Drawing content requirements

(1) Sequence of drawing of drawings

In order to enable designers to express their design intentions to Party A better, and to enable the builders to have a relatively complete construction basis, reduce changes and disassembly and modification projects in construction, and improve the effective working time. Therefore, the designer must be complete.The arrangement is orderly (arranged in the following order).

Cover (Print by template by the uniformly produced by the design institute)

Directory (Print by template by the uniformly produced by the design institute)

Project overview

design description

Decoration engineering project table (printing according to the template uniformly produced by the design institute)

Construction drawings (total floor plans, general ceilings, plane maps, planes, ceiling, facade, large details, etc.)

(2) The content requirements of the drawing

Using the plane, facade, and section drawn by the principle of positive projection is the language of the designer's design intention to communicate with its on -site construction.The designer must fully express his design intention to customers and construction staff, and the designer must master the design of the design of the drawing; the projection drawing requires the use of professional drawing software tools. The lines on the drawing must be thick, Smooth and neat, Clearly transfer.Because this type of drawing uses clear lines to depict the design intention of the internal or external decorative space, so strict line drawing and strict graphic specifications are its main features.

1. Cover (Print by template by the uniformly produced by the design institute)

2. Catalog of drawing

The drawing directory must be marked with the picture number, name and remarks of the positive diversion.The graphic is arranged in the order of drawing, and the number starts from the first page of the construction drawing.

3. engineering overview

The content of the project should reflect the general pattern, engineering address, design department, process level, design style, etc. of the construction site.

4. design description

5. Decoration engineering project table

The materials, brands, specifications, colors, and colors of the top surface, wall surface, ground, furniture, foot and windows, and suites and decoration engineering involved in the decoration engineeringThe main materials and suggestions of the project are clearer.

6. Construction drawings

(1) Plane layout diagram

a. The flat map should be cut down horizontally at the door and window hole of the building.The figure should include the structure visible to the sectional surface and the projection direction.

b. Plane map must be noted in clearing the facade logo, the name of the room, and the ground material (including the size and specifications of the material, the material with the edge length 450 should be drawn, the main furniture and home appliance flat layout chartsAir conditioner, etc.).

(2) ceiling plan

a. Smallpox plane map is a mirror of actual construction.

b. It must be marked with the detailed size of the smallpox, the [wiki] elevation [/wiki] and the name of the materials used.

c. To indicate the position of the lamp on the figure, and indicate the name or lamp legend of the lamp.

d. Making and complex shape tops or other complex shapes should have cutting diagrams and indicate cutting positions.

(3) Facial chart

a. Various facade diagrams should be drawn according to the principle of positive projection.

b. The facade chart should include the outline and structure diagram of the buildings, furniture, home appliances, etc. visible in the projection direction, the method of the wall, the method of material, and the detailed size.

c. Various facade diagrams cannot be expressed clearly.The cutting position of the cutting diagram should be selected according to the purpose of the drawing or design that can reflect the characteristics of the whole picture and the representative part.

d. The sectional diagram includes the construction structure, material and size marking visible to the sectional surface and projection direction.

(4) potential chart

a. The potential wiring only needs to indicate the control relationship between the switch and the light position. The line type should be used in a fine arc (can also be properly used in the medium arc).

b. There must be detailed switches (one couples, two -united, multi -united), power sockets, telephone sockets, TV sockets, air -conditioning sockets, broadband network sockets, distribution boxes and other icons (the height of the socket is not indicated.The ground is 300mm, and those who have special requirements should be made on the surface beside the socket).

(5) Detailed decoration and big samples

a. The flat, standing, and section of doors and windows, furniture and other production parts.

b. The furniture diagram must be flat, stand, and section. The facade of the furniture must have a schematic diagram.

c. A part of a part or structure in the drawing requires a detailed diagram of the index node; the skirting board, the mouth, the doorstep, the window case, etc. can be appropriately cut.

(3) Specific requirements for drawings

1. The design of the drawing must meet the requirements of construction specifications and must be constructed.

2. All construction diagrams must be indicated.

3. Drawings drawn by the principle of positive projection are strictly prohibited from drawing pencils and bare hands.

4. Handwriting explanation text needs to be used to imitate the song style or bidding song.

Second, drawing specification requirements

(1) Graph size: There are five types of A0, A1, A2, A3, A4, and five.

(2) Percent: Plane 1: 100 (1: 150), Daming 1:20 (1:30)

Stairs 1:50 (1:60), unit plane 1:50, node large sample 1:20 (1:30), etc., other can be determined.

(3) Use of line type, width and various line types:

1. Rough solid line: A2 (0.4-0.5mm); A3 (0.3-0.4mm); A4 (0.25-0.3mm);;

The main structural contour lines of the wall of the wall in the flat, section, and detailed maps; the outer outline, sectional symbol, detailed diagram symbol, diagram logo and logo of the facadeMM, 0.4mm, 0.3mm coarse line).

2. Middle line: A2 (0.35mm); A3 (0.25mm); A4 (0.25mm); A4 (0.25mm);

For the main structural outline of the objects in the flat, stand, section, and detailed maps.

3. Fine line: A2 (0.20mm); A3 (0.15mm); A4 (0.15mm); A4 (0.15mm);

Used for the subtraction lines that can be seen in flat, standing, and section, marked the size line, breaking lines (without the need to draw a complete disconnection boundary), and the drawing line (for detailed explanation of various parts of the need for explanation), in detail), detailed explanation of various parts of the need for explanation), in detail in detail), detailed explanation of various parts of the need for explanation), in detail), detailed explanation of various parts of the need for explanation), in detail in detail), in detail in detail), detailed explanation of various parts of the need), in detail in detail), in detail for various parts of the need for explanation), in detail in detail), in detail for various parts of the need for explanation), in detail in detail), in detail for various parts of the need for description), in detail in detail), in detail for various parts of the need for explanation), in detail in detail), in detail the parts that need to be described in detail).Figure line, index icon, elevation icon, etc.

4. Fine dotted line: A2 (0.15mm); A3 (0.1mm); A4 (0.1mm);

The invisible partitions in the furniture map, the opening method of the doors and windows and the legend line.

5. Point line A2 (0.15mm); A3 (0.1mm); A4 (0.1mm); A4 (0.1mm);

Used for central lines, symmetrical lines, and positioning axes;

6. Auxiliary solid line A2 (0.05mm); A3 (0.03mm); A4 (0.03mm); A4 (0.03mm);

Used for ground filling, glass texture filling, etc.

(4) Text:

1. The text is always described in the drawing, the word height is 600mm, and the width is 0.8. Use the imitation song style;

2. The text label uses the imitation song style, the word height is 350mm, the width is 0.7, and it is not placed on the horizontal line of the lead;

3. Digital labeling uses tssdeng.shx English or imitation song fonts;

4.The name of the figure below is 550mm high, and the text comments in the figure are 350mm high;

5.The drawing name in the frame is 500mm high, the project name, engineering name and other characters are 400mm, and the designer, school counterparts and other text characters are 350mm high.

(5) Size labeling:

1. The boundaries of the size line and size should be drawn in a fine line. The slope of the size start and end symbol should be drawn in the middle coarse line.

2. The size line should be parallel to the length marked, and the two ends should not exceed the boundary boundary.

3. Dimension numbers should be written in the middle of the size line reading. Do not have a comma between the numbers. The adjacent size line numbers are not enough.

4. The marking number is in millimeter, and the accuracy of the accuracy is an integer.

5. Dimension labeling and elevation are marked in different directions and are not allowed to be represented.

(6) The method of representing the elevation:

1. The elevation high is used as a positive and negative position in the indoor floor. It is used for different heights such as the height of the ceiling on the surface of different ceilings in the ceiling on the surface of the ceiling.

2. The elevation is based on rice, and the number of numerals will be kept 3 digits.

(7) Detailed diagram index logo:

1. Index diagrams, index section cutting icons, and positioning axes of the round thick solid line, 800-1000mm diameter;

2. Details of index: The round is thick, 1200mm in diameter, and the horizontal line of the circle is drawn with a fine line.garden landscape design specification

(8) Outlet line:

1. The part of the incomplete part of the graphic expression needs to be described.The leading line should be used in a fine curve, which is not used in line;

2. Index the detailed figure of the figure to cope with the quasi -round heart; when indexed several same parts at the same time, each leading line should be kept parallel;

3. The multi -layer structure leads to the layers of the lead and must be maintained vertical.At the level of citing the description, it is represented by a small dot (diameter 100mm).

(9) Others:

1. The name of the drawing name: there should be a picture name, the proportion (the font height is half of the graphic name), and there are two lines: thick solid line (0.5mm) and fine line (0.2mm) under the graphic name., 150mm apart between the two lines;

2. Intelligent icon in the plane map: For the signs of each facade in the plane diagram, place it on the left or bottom of the plane diagram.

Note: 1. This specification is customized in A2 (1: 100). All characters are high and some distances are the actual size in the graph. The width width is the size of the drawing.

2. Other graphic output (such as the drawings of A3), there is no need to set up layers and line types, just scales and print according to the drawing space (the regular drawings are not included).

Plan stage drawing (color picture)

1. Plan the location diagram.Indicate the location of the planned location in the city and the relationship with the surrounding areas;

2. Distribution map of service facilities in the surrounding areas.The content and distance between the relevant service facilities of the surrounding areas and the planned location;

3. Plan the status of the location of the location.The proportion of drawings is 1/500 ~ 1/2000, indicating the scope, nature, layer, quality, and quality of natural terrain and landforms, roads, greening, water bodies, engineering pipelines and various land use buildings;

4 Three -dimensional topography of planning location.The use of the geographical information system to make a series of analysis charts including three -dimensional view, slope, slope, the runoff, the surface runoff, the hydrological, vegetation, roads, architecture, Feng Shui and other fields;

5. Analysis of the landscape pattern.On the basis of the status of vegetation plane map, through the analysis of the existing landscape in the venue, the preliminary concept of the planning landscape pattern is proposed;

6. Analysis diagram of landscape view inside and outside the venue.On the basis of the current three -dimensional topography, analyze the liaison of the view of the landscape inside and outside the venue;

7. Local cultural pattern analysis diagram.Based on the current building and road plan, through the analysis of the local culture of the venue, the preliminary concept of the planning culture pattern is proposed;

8. Ecological pattern analysis diagram.On the basis of the current plan, through the analysis of the existing ecological environment, the preliminary concept of planning the ecological pattern is proposed;

9. Appropriate analysis diagram of land use.On the basis of the current plan, through the comprehensive analysis of all nature and artificial elements inside and outside the venue, the main characteristics of the blocks and the appropriateness of the construction are marked;

10. Plan the general plane performance diagram.The proportion of drawings is 1/500 ~ 1/2000, and the picture should show the location, scope, and relative height of the planning building, grassland, forestry, roads, paving, water bodies, parking, and important landscape sketches (through shadows); the main space should be marked, the main space, the main space, the main space, the main space, the main space, the main space, the main space, the main space, shouldThe name of landscape, architecture, road;

11. Functional structure analysis diagram.On the basis of the general plan, use different colors of symbols to abstract the planning function and structural relationship;

12. Functional diagram.On the basis of the general plan, use different colors to indicate the location of the land for the planning of each function, indicate the function name;

13. Traffic structure analysis diagram.On the basis of the general plan, use different colors of symbols to abstract the structural relationship of the planned road;

14. Internal and external traffic contact diagrams.On the basis of the general plan, use different color symbols (lines, arrows, etc.) to indicate the level and traffic direction of the external road, and indicate the location of the surrounding transportation stations;

15. Internal traffic diagram.On the basis of the general plan, use different color symbols (lines, arrows, etc.) to indicate the level and direction of the internal planning road, and indicate the parking position and range of non -motor vehicle parking in the internal motor vehicle;16. Pedestrian system diagram.On the basis of the general plan, use different color symbols (lines, arrows, etc.) to indicate the location and scope of internal walking, non -motorized car system, indicating the Square of the Square;

17. Road layout diagram.The proportion of drawings is 1/500 ~ 1/1000, and the red line position, horizontal section, cross -point coordinates, elevation, slope slope, length, and parking lot of the road;

18. Water system planning diagram.On the basis of the general plan, use different colors to indicate the type and scope of the internal planning of the water body, and indicate the location of the bridge, water source, embankment, and the direction of water flow;

19. Analysis of green space structure.On the basis of the general plan, use different colors to abstract the type and scope of the internal planning green space;

20. planting planning diagram.The proportion of drawings is 1/500 ~ 1/2000, indicating the types of main plants, the number of planting and specifications, and the main seedlings planting table;

21. Landscape structure planning diagram.On the basis of the general plan, use different colors to abstract the internal landscape structure and elements of the landscape;

22. Service facility system planning diagram.On the basis of the general plan, use different colors to abstract the nature and relationship of internal service facilities;

23. security system planning diagram.

On the basis of the general plan, use different colors to abstract the design of security facilities and overall security systems at all Levels;

24. Vertical planning diagram.

The proportion of drawings is 1/500 ~ 1/2000, indicating the scope, relative elevation and height difference processing method of different height plots;

25. Plan for water drainage engineering.The proportion of drawings is 1/500 ~ 1/2000;

26. Power and Telecom engineering Plan.The proportion of drawings is 1/500 ~ 1/2000;

27. Gas thermal engineering planning diagram.The proportion of drawings is 1/500 ~ 1/2000;

28. Preparation planning diagram.

29. Planning and design in key areas.

Plan and design key areas through perspective, plane, facade, and section;

30 The main street view.

It indicates that the height, color, and main structure of the building along the street show the spatial relationship between the planning building and the surrounding environment;

31 Main buildings and structure scheme diagrams.

The main building floor layer plane, underground building negative layer plane, and the main structure of the main structure to set up a section;

32 Express renderings or pictures of design intent.

Generally, the overall bird's eye view, night scene effect map, important attraction effect, characteristic attraction effect, local magnifying the design of the design intent, and the relevant pictures, important buildings and structure effect map results submit drawings (blueprint)

Drawing requirements

1. Planning location map: indicate the location of the planned location in the city and the relationship with the surrounding areas;

2. Planning location drawing: The proportion of drawings is 1/500 ~ 1/2000, indicating the scope, nature, layer, quality, quality, quality, and quality of natural terrain, roads, greening, water bodies, engineering pipelines and various land buildings;

3.Planning general plan: 1/500 ~ 1/2000 of the drawing, the plan should show the planning building, grassland, forestry, roads, pavement, water bodies, parking, important landscape sketches, sculpture positions and scope;, Size and names of architecture and roads;

4.Road traffic planning: The proportion of drawings is 1/500 ~ 1/2000, and the red line position, horizontal section of the road should be marked on the picture, and the coordinates of road cross points, elevation, slope slope, length, parking lot land boundary line;

5.Vertical planning: 1/500 ~ 1/2000 of the drawing ratio, indicating the scope, relative elevation and height difference processing method of different height plots;

6.planting design drawings: 1/500 ~ 1/2000, indicate the main plant species, the amount of planting and specifications, and the main seedling planting table;

7.Plan for water supply and drainage engineering: drawing ratio 1/500 ~ 1/2000;

8. Planning of Power Telecom engineering Planning: The proportion of drawings is 1/500 ~ 1/2000;

9. Planning of Gas thermal engineering Planning: Drawing ratio 1/500 ~ 1/2000;

TenPlanning and design drawings in key areas.(Generally, it should include entrance, major public construction areas, typical areas)

11. The main street view: the proportion of drawings is 1/500 ~ 1/1000, indicating the height, color, and main structure height of the building along the street;

12. Main buildings and structure plan: The main building floor layer plane, the negative floor of the underground building, and the main structure of the main structure;

(3) Model.

The overall model ratio is 1/500 ~ 1/1000, and the proportion of important local models is 1/50 ~ 1/300;

The overall model should reflect different nature base surfaces such as the scale relationship of various spaces in the site, important height difference treatment, road green space and hard land, the relationship between green enclosure, the relationship between the venue and the surrounding road building environment; the local model should reflect the texture texture, Dynamic, spatial scale ratio, etc.

Disclaimer: The above content is derived from the provision of the program system index or the sharing of netizens. It is for your reference only and does not represent the research perspective of this website. Please pay attention to the authenticity and authority of the source of the content of the content.Apply to delete & gt; & gt;Correction & gt; & gt;

[Sunshine room curtain] Can the sun room use ordinary curtains?What curtains do sunshine rooms do?

What is the sun room?

Sunshine room is also called glass room.The Sunshine room uses glass and metal framework from all -round non -traditional buildings to achieve the goal of enjoying the sun and getting close to nature.Sunshine room is a building respected by natural and fashionable people at home and abroad.The Sunshine room is a wide range of victory industries that are widely studied in North China and Shanghai. It needs to be designed and built according to the needs of the site and personal hobbies. The interior layout can be decorated according to personal preference.The balcony or terrace Sunshine room is in the entire room, so visual connection is very important.

Can the sun room use ordinary curtains?

Most ordinary curtains only provide Shading and decorative effects.The warmth and sound insulation that can be achieved by curtains are almost equivalent.Because the traditional houses and sun rooms are different in sunlight.Traditional houses need a quiet space, and curtains with high shielding strength are the first choice.Or curtains can provide a bright design for the room.

The Sunshine room requires no lighting products that can not block light but can block heat and harmful fiber. It is best not to affect the viewing.Therefore, ordinary home costume curtains are not suitable for sunshine rooms and cannot meet the requirements of the sun room.

What curtains do you use in the sun room?

1. Honeycomb curtain

Sunshine hive curtain is made of a new type of non -woven honeycomb fabric. It has a half -Shading, full -light, and full light transmittance. Honeycomb is similar to the honeycomb with strict lines.Blocking ultraviolet rays and very easy to clean.The honeycomb curtain uses ceramic electrophoretic paint technology, with a variety of colors and not easy to fade.In addition, the curtains of this material have excellent corrosion resistance and excellent heat dissipation, which can provide good use effects.

2. ceiling curtain

Because the sun room has no wall cover, the entire space is directly contacted with the outside world. The design of the Shading curtains can well block the light to block the cold wind.The ceiling curtain is made of environmentally -friendly polyester. The environmental protection material first ensures the health and nature of indoor air. Secondly, there are many colors to choose from, which can create different sun room decoration effects.Through the three modes of FTS, FSS, and FCS, you can use manual or electric ways to use more convenience. At the same time, various different curtain forms can be applied to a sun room with different external contours.

3, twisted roller

The tingling curtain is made of naturally rampant. The curtains are very natural and healthy, and it is closer to nature through pure handicraft.The use of hemp rolling curtains in the sun room can bring different aesthetic perspectives. At the same time, because the hemp can absorb odor, it can adsorb the odor gas in the sun room when used, and can effectively cover the sun.The tingling curtain also has a natural resistance to ultraviolet rays, which can protect the human body to protect ultraviolet rays.

1. Garden Tool

Gardening tools are the maintenance equipment of human greening landscapes. It is a mechanized Tool for maintaining lawn, hedge, flower and grass, and trees as the target, replacing most manual labor.According to the use of use, Gardening tools include Gardening tools and Gardening tools.Classified according to the use object, it can also be divided into home tools and professional tools.

Gardening tools include garden scissors, flower tools (garden gear, small sets of leisure).

The main products of garden scissors include high branches, fence shears (fence cuts), branches and cuts (branches cut, pruning), cutting, cutting, cutting flowers, cutting grass, etc.flowers, small sets of leisure) include flowers, shovels, rake rakes, flowers, pork forks, etc.Rare, rakes, hoe, big shovel, small flower shovel, small flower shovel, three -character spatula, one -word fork, hexagonal flower rake, etc. Detailed & gt; & gt;

Second, garden machinery and equipment

1. oil saw

It is a garden machine that is used to mix trees. Because many trees have a lot of vines, sometimes other ground vegetation in the garden cannot be exposed to sufficient sunlight. At the same timeTherefore, in order to reduce the excess branches, the oil saw came in handy. Generally, the oil saw of the short -to -board board was used as a intermittent branches trimming. Detailed & gt; & gt;

2. Cutting machine

Presumably the grass -cutting machine is the type of garden equipment that everyone is most familiar with, because we often see Gardening workers to trim the lawn with a straw machine. In fact, the existence of large -scale gardens can not only make the environment better, but also a beautified environmentThe role of the grass is just the responsibility of garden beautification, so it can be called a "beautification engineer" in the process of garden greening. Detailed & gt; & gt;

3, hedgery machine

It is a garden machinery specializing in vegetation. The main pruning targets are trees and plants such as yang and winter green.According to the different shapes of the plant pruning, the hedgery machine is divided into double toughness and single toughness, and the single tough hedgery machine is mainly trimmed on wall -shaped hedges.The hedge is actually the hand of the hedge machine. It is really an artist in garden machinery. Detailed & gt; & gt;

4. Civil excavator

When it comes to excavators, the first thing everyone thinks of is the application in construction and construction projects. In fact, its use is very wide. For example, in the field of garden greening, excavators are ideal equipment used to dig pits to transport soil to plant trees and plant trees.For example, everyone knows that in the garden, the amount of trees is very large. If the workers are digging the pit alone, not only the work efficiency is low, but also very tired, but now the excavator is different.The original workload can be completed within one hour, so the excavator has also become the most powerful helper in the process of garden greening.

5. Cutting machine

People who are unfamiliar with garden greening may not know. In fact, garden greening is also divided into two types of soft landscape greening and hard scene greening. soft -scented greening is the planting and trimming of trees and flowers that we are familiar with.In terms of hard scene greening, the cutting machine is often used as a cutting Tool for various facilities. Its existence not only simplifies the hard scene greening project, but also greatly improves the efficiency of hard scene greening. Garden Machinery Equipment & GT; & GT;

three, What are the green pruning tools

1 Hand saw

The hand saw is a green plant trimming Tool such as flowers, seedlings, fruit trees, garden trees, etc., generally sawing blade length: 180-350 Millimeter.The chainsaw, also known as "power saw", is a cutting Tool used to cut wood, stone, steel, etc.Aiming at the trimming of fruit trees, early results, extend the economic life.

2 Pruning

There are different types of branches and cuts, with high branches and cuts, branches, and knife types.The preparation of the pole is mostly glass fiber fiber rod and hardcore. The length is: 3 rice, 3.5 rice, 4 rice, 5 rice.However, the quality of simple high -branch shear products is poor in quality and common faults.

What are the principles of Fountains?

Introduction to Fountain Principles

The principle of the Fountain is that the amount of mobility is conservative. From a large radius pipeline to a small radius pipeline, it generates a change of speed and rushes to the direction of the ground.The speed of the diameter is driven by the pump. The speed in the small radius is the original speed, which is transformed by the momentum conversion.You need to choose a micro -dollar to calculate the momentum conservation, so that you can find a speed. This speed is the exit speed, and then a toss of movement. This is an ideal situation. There is no friction and no wind.

Type of Fountain

In general, the Fountain landscape can be divided into two categories:

The first is to adapt to local conditions. According to the terrain structure at the scene, it is made from natural water scenery, such as: wall spring, Yongquan, Wuquan, Tube flow, streams, waterfalls, water curtains, water falls, water turtle, vortex, etc.

The second is to rely on the artificial landscape of Fountain equipment.This type of water scenery is widely used in the field of construction, with rapid development and a variety of types. There are music Fountains, program -controlled Fountains, swing Fountains, Running Fountains, bright Fountains, amusement fun Fountains, ultra -high Fountains, laser water curtain movies, etc.

Classification form

The Fountain is an artificial plastic surgery or a natural spring pond, which is sprayed with beautiful water positions for people to watch.The Fountain is an important part of the garden.In modern gardens, in addition to plant landscapes, Fountains are also important landscapes. It is both a kind of water scenery art, reflects the combination of movements and quietness, forming a bright and lively atmosphere, giving people a beautiful enjoyment. At the same time, the Fountain can also increase the air in the air.Negative ion content plays the role of purifying air, increasing air humidity, and reducing ambient temperature, so it is loved by people.There are many types of Fountains, which can be divided into the following.

(1) Ordinary decorative Fountain consists of various flower patterns to form a fixed Fountain.

(2) Combining Fountain Fountains and sculptures with sculpture form a landscape.

(3) Water sculpture is shaped by artificial and machinery to form a variety of large water pillars and forms landscapes.

(4) Self -control Fountain uses electronic technology to control water, light, sound, color, etc. according to the design program to form strange and changeable landscapes.

(5) In addition to the above types, there are also high Fountains, drought Fountains, stacking spring, music Fountain, Running spring, jumping Fountain, floating Fountain, sketch spring, Italian spring, music Running spring, etc., can also be formed by spraying to form by sprayingUnique water scenery.

The main form of water supply of Fountains is: DC water supply, water pump circulating water supply, and water supply of diving pumps.

The Fountain spray head is the main working part of the Fountain art modeling. Its role is to form a gorgeous water splash with a certain pressure of water with a certain pressure, spray it over the water surface.A variety of different nozzles configurations can create a variety of water scenery and landscapes, which are exciting and exciting and producing wonderful artistic effects.There are many types of Fountain spray heads. According to different structural forms, they can be divided into direct, rotating, water film, suction, atomization and other types.There are many types such as ice tower, open screen and spray nozzle.

With the application of light, electricity, sound, and automatic control devices on the Fountain, the emergence of music Fountains, intermittent Fountains, laser Fountains, etc. have enriched the content of the Fountain and enriched people's dual feelings in visual and hearing.The famous Fountains in the history of my country such as Beijing Yuanmingyuan Daishui Fountain Group, modern Fountains on both sides of Beijing Tiananmen, and temporary Fountains on the National Day Tiananmen Square are very magnificent, winning the praise and applause of Chinese and foreign tourists.

Fountain

The Fountain was originally a natural landscape, the ground appearing on the ground.The Fountains in the garden are generally decorated with decorative water spraying devices for landscaping.The Fountain can moisturize the surrounding air, reduce dust, and reduce the temperature.The fine water beads of the Fountain hit with air molecules, which can produce a large amount of negative oxygen ions.Therefore, Fountains are beneficial to improving the appearance of the city and the physical and mental health of residents.

Appreciation of the world's first Fountain picture

On the beautiful landscape of Canberra in the Australian capital.There is an artificial Fountain with the highest spray in the world.This Fountain was established by the Australian federal government in 1970 to commemorate Captain Cook for 200 years.Named "Captain Cook Memorial Fountain".

The spray port of the Fountain has 750 horsepower power and has two layers of water pumping systems.The Fountain has a spray speed of 200 kilometers per hour.The maximum jet limit is 150 meters.Looking at it from a distance, a water pillar on the lake was flushing the sky, the waves splashed, and they were spectacular and were become the world's first Fountain.

What are the benefits of Sunshine room

1. Close to nature

Sunshine room is an interior and can also enjoy the outside scenes; placing sofas or lounge chairs in the interior, and planting flowers and plants. You can also place flowers and potted decorations.More comfortable and leisurely.

2. Enjoy the sun

The sun room is directly exposed to the outside world, and the sun can be directly illuminated, and the wall is replaced by the glass to form maintenance, thereby forming a closed space.The real Sunshine room can heat the heat insulation, ventilation and water exudation, bringing people to the beautiful feelings of nature.

3. leisure and entertainment

Many families will design sun rooms as children's rooms, entertainment rooms, living rooms, etc. The green house is full of houses and sunlight, which can be relaxed in entertainment. Both home and leisure and friend gatherings are full of joyful atmosphere.

4. Increasing space

The construction of a sun room not only looks at the shape and function of the sun room, but also the determination of its own home environment.If the home area is small, you can seal the balcony design sun room.Not only has the function of the sun room, but also after the balcony can be sealed, not afraid of the wind and rain, and make full use of the area of the balcony to indirectly increase the use of home use.

What are the disadvantages of Sunshine room

1. Seasonal restrictions

The first is that the main structure of the sun room is not a wall, but a tempered glass. Therefore, its heating resistance and thermal insulation will inevitably weaken.The use of sun rooms is limited in seasonal.

2. No maintenanceBe

In addition, the Sunshine house has a very high cost when construction. It is necessary to consider the design of specific drainage and ventilation. When used, if the drainage system is not in place, it will cause very inconvenience in the space leakage in the space.

Is it necessary to introduce the Sunshine room for everyone? What are the answers to the advantages and disadvantages of sunshine houses? In fact, the installation and construction of the sun room are completely based on their preferences and needs.Just follow the trend to make sun room. Through the knowledge above, you can better understand the issues related to the sun room.