How to do the wooden structure of the sun room

1. Obtain quasi -construction procedures

First of all, when the construction of the wood structure of the building, we need to obtain the approval of the relevant departments, so when we expand the sun room, we need to submit a construction application.There are two main types of applications. One form is designated architects and architectural solutions. The two are for help with relevant engineering companies, and they will provide us with all -round services.

2. Construction preparation

After the application is approved, if the owners want to adopt the first plan, then the professional construction unit needs to install the corresponding construction plan for construction.If it is adopted as a second scheme, please ask special engineering companies to design the materials tailor -made from the design schemes from the shape of the sun room from the shape to the construction process.

3. Wooden structure Sunshine room glass selection

In fact, the roof and doors and windows of the sun room can be installed with double -layer hollow glass.The roof is generally safe tempered glass.The sun room is better installed with warm glass. This type of double glass has a layer of invisible stainless material layer. The light can be shot into the window without loss, and the calories inside the house will not spread.The 3 -2mm sound insulation glass can also be installed in the sun room, which is very effective in isolation street noise.

4. Install wooden structure

The Sunshine room should have the effect of Shading and ventilation, so what materials do these two functions are achieved?The outer Shading outside the building is completed by the sunshade louver installed on the roof track.The roof ventilation sunroof is essential in the south and west of the building. We recommend an electric ventilator to you.The adjustment effect of temperature is very good.For this purpose, we will install the bottom ventilation equipment on the wall of the building so that we can ventilate even if the door is not opened.

precautions for wood structure Sunshine room

1. Pay attention to the design of the wooden structure Sunshine room. If it is to create a traditional functional wooden structure, the function it contains the main features, study rooms, and activity rooms. Therefore, in addition to wooden materialsSelect the tempered hollow glass in the roof, and then add an appropriate amount of special hollow glass sunroof, or use the broken bridge aluminum hollow glass window and aluminum -wood composite hollow glass window for surrounding maintenance.Suntech, sunshade, invisible screens and other products.

2. The wooden structure of the sun is not paved, the better.When planning the garden in the exclusive wooden structure sun room, the floor tiles do not need to be paved too well. Try to be a bit like a gully. This has some benefits for retaining soil and water. Natural geological features also adopt such a more environmentally friendly and scientific way.The corner of the roof is appropriately reduced to some planes, which is convenient for excessive water in the soil to discharge from the floor drain.In addition, it is necessary to lay a non -woven isolation layer like non -woven fabric on the board to prevent water from taking away the sediment and even the pipeline during the process of leaking.

3. For villa building wooden rooms, it is mainly used for customers used in leisure, fitness, planting flowers and plants, etc., you can choose a all -day glass sun room, and you can make sunny curtains and sunroofs.

4. What plants should be placed in the sun room should consider temperature and humidity.When the owner of Sunshine house needs to plant some natural plants in the sun room, please pay attention to the selection of plant species that are wet and hot, because the sun room, especially the Sunshine house in Beijing, is relatively long, and the general seal of the sun room isGood performance.

1. What is a Tent

The Tent is a new type of Outdoor activity originating in Europe for temporary buildings, also known as European tents, and is lightweight. It is called "mobile real estate".It is widely used in temporary warehouses, factory buildings, temporary construction, exhibit tents, tenthouses, and emergency disaster relief.The Tent is a new concept for the international masses. It is also gradually appearing in people's daily outdoor activities in recent years., Convenient storage, small volume and other characteristics.

2. What are the characteristics of a Tent

1. Flexible and convenient

It is easy to install and disassemble, and the venue is free to choose in different environments.

2. Safe and stable

Aluminum alloy framework, steel parts connection, PVC tunnel high -frequency welding, base fixation, and strong mechanical properties.

3. Complete service

Pre -sale, sales, and after -sales tracking service, the problem will be feeded and resolved as soon as possible.

4. Satisfied personality

It can be designed and produced according to demand, producing a Tent, elegant appearance, and providing corresponding supporting facilities (hardware walls, high partitions, top curtains, edges, flooring, furniture, lighting, air conditioning, mobile toilet, European fence)

5. Wide applicable

Commercial exhibitions, festivals celebrations, catering and entertainment, logistics and storage, Outdoor leisure, convenience municipalities, etc., all kinds of Outdoor temporary activities are useful.

What are the types of tents?

There are many styles of the Tent, which can be divided into three types according to different appearances:

1. A -shaped Tent

The A -shaped Tent is also known as an activity Tent, which is the most widely used, and it can be used from Outdoor business to large exhibitions.

2. Scoop Tent

The bottom surface is Square, and the top of the canopy is like a tower spire, with an elegant appearance.

3. Ballical Tort

The dome is called "the strongest space, the lightest, and the most effective design."With a rigid and stable architecture, you can temporarily suspend light and audio equipment to decorate and fill your activity space.

4. There is also a type of Tent mixed with the characteristics of A -shaped tents and scoop tents.

Fourth, how to do the Tent

1. Positioning the bottom plate of the column

First determine the flat ground at the installation site, then position the bottom plate to determine the position of the four bottom plates and then measure whether the distance between the diagonal line is equal.If you are not equal, you must re -adjust the position. Be sure to ensure that it is a rectangular rather than a parallel quasoplasty.After better, fix the column bottom plate in the corresponding four positions, and use the same method to better and fix the other bottom plates of the length direction.

2. Place a good part

Section A section A, angle node, diagonal beam A, and diagonal beam B (two -section oblique beams with more than 14 meters), oblique beam undertaking parts (connected to section A section A and oblique beam B, 14There are no components below the rice span), the top nodes are placed, and all components form a gables. Putting other gable surface components in the same principle is placed in the same principle. Note that it must be placed on the ground in one direction.

3. Connect the diagonal beam A/B section

Insert the oblique beam A section A into the oblique beam to undertake, and tie them into two screws (Note: the small hole will not be installed first)

4. Install top nodes

Connect the connected diagonal beam AB section with the top node, the screws tied into, and tighten.If it is the first gear, you must also install the wire flower cable, and install the buckle on the one -end of the flower cable without flower cable on the second hole in the section B section B.Use this method to install all the top nodes and oblique beam AB sections.

5. Install corner node

Insert the oblique of the corner node into the section A section A, connect the upper end of the column to the straight end of the corner node, and penetrate the screw and screw the nut.If the wire flower cable and the cross rod are installed, the hole is installed with a hole on the top of the corner node, and the hole is installed with the hole in the lower end of the corner node.In the same way, install other corner nodes.

6. Connect the column and the bottom plate

Put the lower plug -in holes on the column to the screws connected to the holes on the bottom plate and tighten the nut.The same method connects other columns and columns.Note that the entire installation process must be gently put in lightly, and it is necessary to use wood to pad the assembled gables. When moving aluminum materials, be sure to lift the entire frame to avoid aluminum and sand and other sand and other sand and other sands on the ground.Item friction causes the surface of the aluminum material.

7, vertical mountain wall

All personnel are divided into four teams, two people pull steel ropes, and two people stand at the corner nodes. Others stand at the apex, lift the gables up, and lift them to a certain height.Continue to lift up.People who pull the steel wire rope should also pull up the gables up.

When the entire gables are erected to 70 degrees, they must stop, and then slowly stand vertical with the ground. At this time, the person who pulls the steel wire rope stood a slightly stable on the top.At the same time, several people have to support the pillars.Two people install the flat iron end of the cross rod to the screw below the upper end of the column, and tighten the nut.Connect the other end of the cross rod to the bottom hole below the bottom plate of the adjacent second gables, penetrate the screw and tighten the nut.Pose a second gable in the same way and install two other cross rods.

8. Install beams and bars

The cross -section shape of the beam is house -shaped, and the cross -section shape of the strip is Square.The hooks of the beams or bars are ended up, and then the hook end is tilted to the U -shaped ears on the corner node or in the -shaped iron on the corner node.Use a ladder to slowly lift the straight hook end of the beam/bars and hang it into the ears of the gables or corner nodes on the side of the hook.Under normal circumstances, there are three beams between the two gables, namely one end of the two ends and one in the middle of the middle. The bars increase or decrease according to the size of the span.

9. installation

Connect the middle support to the small hole in section A in section A, insert the screw, and tighten the nut.After installing the middle support, hang the side beam into the corner node and the middle -supported Hanging ear.Note that when the side beam is Hanging, be sure to install it from the side of the side beam, first hang the side beam accessories into the Hanging ears in the corner node, and then slowly lift the straight hook end to install it to the middle support Hanging Hanging on the hook above the support.In the ear, remember not to install the straight hook end first, otherwise the installation is unsuccessful.Like the beams and bars, you must first install it from the hook end, and then hang the straight hook end.

10. Install the top

Put on the hemp rope at both ends of the top of the top, and the strap is in the Tent.Then stuff the tape on both sides of the top end of the cloth into the slot of the diagonal beam, and throw the other end of the hemp rope from the entire frame of the Tent, and then pull the four people to the hemp rope at the same time, so thatThe groove slowly pulled to the opposite side.Remember to pull it hard at the same time, otherwise the top will be stuck and causing pulling. To solve this problem, you only need to pull back the top back to a certain position and then pull it back again at the same time. Be sure to go forward at the same time.The same method is used to pull other top tops.

11. installation side triangle

Similar to the installation cloth top also needs to use hemp ropes, but when installing the side triangle, someone must stand to the side of the (high ladder) top node. The only difference is that the strap of the side triangle is outside.First put on the side triangle into the slot of the diagonal beam, and then the people standing in the middle pulled up to the hemp rope. At the same time, when standing at the corner node, the side triangle was lifted to lift the side triangle to let the rubber strip go up the groove.When installing the side triangle, be sure to pay attention to the left and right points, do not install it.After pulling the two side triangles, the middle seam Tube is slowly pierced from the lower end between the two side triangles (a section of the rubber strip is cut off slowly (the middle seam Tube has a flat iron inside).When you put it on the top node, hang the flat iron into the ears of the top node.

12. Install the curtain

Open the curtain, facing the front (there are ropes or covers on it), first put the rubber strip into the pillar to milling.Then slowly pull up the top, plug the codes into the gap in the beam milling slot. Pay attention to stuffing one by one in order.Put in down, pull the curtain to the middle, and place the side of the rope on the side of the tun ring, and connect the rope from top to bottom.

13. Install the top pressure rod

Put the top pressure rod into the crusher cover of the top of the cloth (that is, there is a double -layer Sleeve at the top of the top of the cloth, then put the end pressing iron in the press, and put the rectangular screw in the seamless pipe of the angle node.The last step is to plug the crusher of the surrounding curtain into the bottom of the rod at the bottom of the curtain to prevent the wind from blowing the curtain.

5. precautions for Outdoor exhibition canopy

1. Selection of the venue

We all know that today's Tent products do not have too high requirements for venue conditions. Generally, the flat ground can be easily built, as well as Outdoor exhibition tents.However, in order to hold the activity safely and orderly, we still need to investigate the environment of the surrounding venue before the Outdoor Tent was built, and prepare the solution in advance according to the actual situation, so as to ensure the normal construction of Outdoor exhibition tents!

2. Determine the size and measure the venue

After we confirm the conditions for building the site, we also need professional staff to carry professional tools to the venue for measurement.If the site conditions are found to be unfavorable, you need to adjust it in time, and finally determine the Tent specification plan and fixed method.

3. Verify the time of use

After confirming the above two points, we also need to confirm the time when we need to use a Tent.In this way, a canopy manufacturer can arrange production plans, stocking, transportation, and construction based on the actual situation.

Disclaimer: The above method stems from the index of the program system or the sharing of netizens. It is for your reference only and does not represent the research perspective of this website. It proves that it is valid. Please pay attention to the authenticity and authority of the source of the content of the content.Apply to delete & gt; & gt; error correction & gt; & gt;

1. How much is one Square meter for building a sun room?

1. How much is the price of Sunshine house for one Square meter?The price of glass sunshine on the market is available from 200 yuan to Square meter to 2800 yuan per Square meter.The color steel plate sun room is relatively cheaper than the other two prices, about 260 to 300, each Square meter; the price of the sunboard and sun room is about 800 to 1,200 yuan; the price of the tempered glass sun room depends on what you chooseThe thickness of the glass has a single -layer tempered and double -layer tempered and tape -tilted glass reinforcement. The price of the sun room is different.

2. How much is one Square meter in the broken bridge aluminum Sunshine room? There are two types of broken bridge aluminum sun rooms. One is a sun room with ordinary profile wall thickness and thin.In appearance, the other is the system sun room. The price of the system Sunshine room is different depending on the shape and the brand.

2. Types of Sunshine room

1. According to the structure of the Sunshine room: the pure wood structure of the sun room, the pure Steel Structure of the sun room, the sun room structure of the aluminum curtain wall, the steel and aluminum structure of the sun room, and the standard sun room system.

These five categories also represent the development and evolution of the source of the sun room, especially the last representative of the development of the sun room has entered a new stage.There are various types of new materials, with anti -ultraviolet function, and also changed the traditional packaging transportation method and the entire sun room system is convenient for disassembly.

2. Category of Sunshine room shape: Single diagonal top sun room, shape top sun room, combined sunrise room, special top sun room, flat -scholy top sun room, creative top sun room (including: human font sun room, arc sunlight, arc sunlightRoom, etc.).

3. The grade of the sun room can be divided into: functional sun room, casual sun room, ordinary sun room.

(1) Functional Sunshine room belongs to high -end sun rooms.It can be used in special spaces such as hospitality rooms, small restaurants, study, or children's entertainment rooms.This type of Sunshine room is generally baolin or pure wood structure frame, plus multi -layer sunlight plate and glue hollow tempered glass, solid wood or aluminum bag wooden doors and windows.If plastic steel windows are selected, it will be better than other doors and windows.This type of Sunshine room can be added with dedicated ventilation devices and Shading systems to make it better, and it will be more convenient and practical in the later period.

(2) The casual sun room belongs to the mid -range sun room.This type of sun room is larger than ordinary types, and the structural facilities are much better, which is very suitable for villas and private courtyards.Coupled with the exquisite sunny curtains, the opening of the window can become a leisure house, which can be placed in entertainment and leisure supplies such as tablet tables, fitness equipment.summer nights can be lying on a casual chair and looking up at the starry sky.

(3) The structure of ordinary sun room is easier.There are many transparent materials in the sun room, and it is also an essential ingredient for the light transmission of sun room. Now there are tempered glass, ticing glass, endurance board, and sunny plate (hollow plate) on the market.Materials are different from the advantages and disadvantages.Single glass, endurance board, tape glass.Based on the frame of the sun room frame, the heat, bending and satisfying various shapes, while the thermal insulation and sound insulation effect is poor.(Suitable for the gym, washing room, and leisure room in winter.) Ginochemical hollow glass, the heat insulation and sound insulation effect of the sunboard is like indoor.The hollow tempered glass is not easy to process arc.(The processing arc cost is too high.) The sunboard is easy to enter the dust, and the life of the PVC material is only 10 years, and the glass products can be used for a long time.

4. Sunshine rooms are classified according to top materials: glass top sun room, broken bridge aluminum top sun room, Degao tile top sun room, color steel plate top sun room.

5. Classification according to the location of the sun room: the sunrise house, the garden sun room, the gate of the door, the sunrise house, the underground courtyard sun room, and the sealing balcony sun room.

6. European -style Sunshine room classification: Mediterranean -style sun room, Byzantine -style sun room, Victorian Sunshine room, Gothic sun room, Georgian Sunshine room, California Sunshine room, etc.Sunshine room and Gothic sun room can be called the classic of European -style sun rooms. The design of European -style sun rooms mainly pay attention to the choice of materials, the structure and ventilation of the sun room.