General installation steps of lawn Lights

When the lawn light is installed, the lamp shell should be turned on, the light source and the supporting electrical appliances are installed, and the leading line is attracted from the thread hole to the bottom of the light pole.The flange is aligned with the basic embedded piece screw and stands vertically.Then use a nut or flattener to tighten the nut.

1 , Embedded pipeline.When the lawn lamp is wiring, a wire that is smaller than the power distribution phase wire is used as the ground wire to connect the metal shell of the lamp or the lamp column, and the ground wire is connected to the "ground" of the system.If the length of the ground line is in 25 When the meter is above the rice, the end is repeatedly grounded, and the repetitive ground can be buried. 4mmx40mm ,long 25 Dillarly flat iron of rice, beat 5 Extremely connecting ground, grounding pole adoption 5 50 Galvanized angle steel, long 5 Mi, vertically hit the ground, is welded from the grounding pole to the galvanized flat iron.

2 Foundation.The basic pouring work of lawn Lights is generally done in the early stage by construction workers, but it should be noted that the embedded pipeline needs to be used to avoid normal use in the later stage.

3 , Install lawn Lights.Open the packaging of the lawn lamp and check the integrity. Refer to the product manual to assemble the lamp.The usual method is to turn on the shell, install the light source and supporting electrical appliances, attract the leading line from the thread hole to the bottom of the light pole, then link the light head and the light rod.The stubborn screws are aligned and standing vertically.Then use a nut or flattener to tighten the nut.

4 , Power cable wiring.The wiring of lawn Lights is best carried out by a professional electrician master. At the same time, it is necessary to do safe and reliable grounding, so as not to leave potential risk factors for later use.

Pay attention to safe and reliable grounding in the installation of lawn Lights

When the lawn lamp is wiring, a wire that is not less than the power distribution line is used as a ground wire to connect the metal shell of the lamp or the lamp column, and the ground wire connects the "ground" of the system.When the length of the ground line exceeds 25 meters, the end of the end is repeated. Repeated grounding can bury a 4mmx40mm, 25 -meter -gross -zinc -galvanized flat iron, hit 5 grounding poles.The vertical hitting underground, the grounding pole is both welded with the galvanized flat iron, and the ground resistance is required to be less than 4 Euros.The grounding pole of the light rod must be welded firmly, tiny at the joint, and the PE protective line of the street light power supply must be pressed with a spring cushion to the top and then screw the nut.For example, when we are greater than 25 meters, we need to do again repetitive ground at the end. Then repeat the grounding is a galvanized flat iron with a length of 25 meters in length. At the same timeAfter the vertical hit the ground, welded.

Pay attention to the pitch of lawn light installation

lighting is 0.5 meters high and 23 watts of energy -saving lamps require a distance of about 11 meters. This is the best lighting effect and can save a lot of costs.The distance between the garden Lights is about 25 meters, and the lawn Lights depends on the specific conditions and requirements. Some rockery and pavilions will be installed more.

The installation of lawn Lights is a problem that needs to be considered in multiple aspects. When the user is installed in specific installation, you must also pay attention to it. You must choose good quality lamps, especially in more humid places.Lights.The installation of the lawn Lights can ensure that the installation effect is good, and it can also have a safe effect, so that the effect of use can be better displayed.

1. How to install Outdoor folding tables

A family Outdoor camp can carry an Outdoor portable folding table, which is very convenient to use Outdoor folding tables to play cards, drink tea, and barbecue.How to install it?

1. Preparation before assembly: Preparation tools: cross or word screwdriver, wrench, pencil, it is recommended to use a pistol electric drill.Putting the circular fixing head into the cross -side side of the connected head in the pores is exposed, and the fixed head gap is aligned with the position of the cross section.

2. Twist the connection rod into the rising plate that has been embedded in the board. It is best not to twist to the end. Put the universal wheel with the No. 14 wrench into the mobile door marked with the drawing. You do nt need to twist to the end. The height is adjusted later.

3. Turn the handle into the tapping hand holes. Pay attention to the front and back of the door panel. There is no side of the pages. The handle screw may be too long. ThereforePut the pad between the screws and the door panel.

4. When leaving the factory, you only have a pre -drilled screw hole on the mobile door and door panels. The union holes of the two side panels and the top board are not pre -drilled. This is for buyers to install it., Can only make buyers suffer a few more screws.The screws of the fixed pages are self -attack wires. Even if there is no pre -holes, it can be conveniently screwed in with a screwdriver.

5. Inside the folding table, the top panel is exposed to the ground, and the two -piece desktop and the No. 1 top plate are connected with the unity.Move the door panel, support the desktop, insert the plug -in head into the hole on the back of the desktop, take a pencil drawing position on the mobile door and fix the insertion and the insertion eye.

6. When assembling the folding table, you should lay felt cloth or carton on the ground to avoid scratches from the table.When installing the pages, because the surface of the board is relatively hard, the screw is difficult to twist. You can hold the screws first, knock the screw with the hammer a few times, and leave the plate to leave a small hole in the depression, so it is easy to twist.

The above is the installation method of Outdoor folding tables. Different outdoor folding table installation methods may be different. However, the installation instructions will be accompanied by the general purchase, which can be installed according to the instructions.

2. What are the precautions for installing Outdoor folding tables?

1. Do not get started to install the outdoor folding table. First look at the installation instructions and install it according to the manual to avoid being installed casually. Otherwise, it is troublesome to disassemble or remove it.

2. Before installation, you should carefully see if the parts and the installation tools are complete.

3. During installation, screws, connecting rods, etc. The parts that need to be twisted should be screwed in place, so as to be firm.

4. After the installation is completed, you need to test it to see how the weight is, whether it is strong, and inconvenient to folder.

What is the general height of Outdoor Wall lamp installation?

Because the distance is determined by the effect of lighting, and the convenience of installation and maintenance is needed, the installation height of the general corridor and the Outdoor Wall lamp of general corridors and corridors should be slightly more than 1.8 meters high, which is about 2.2 to 2.6m from the ground.However, if you are on the workbench, you need to be about 1.5 meters away from the working horizontal line.

There are many models for Outdoor wall lamps, and different models of Outdoor wall lamps have different installation heights.The height of ordinary Outdoor Wall lights should be controlled between 1.7 meters-1.8 meters, and it should also be adjusted according to the actual situation.For example, a Wall lamp with a size of 180mm*160mm model, its installation height should be between 1.4-1.7 meters.The model with a model of 180*350mm, the installation height will be between 2.2 and 2.6 meters.

Method of the installation of Outdoor wall lamps

The Outdoor Wall lamp first needs to connect the wiring of the Wall lamp to use the connection that can be controlled by controlling the switch.The bright application line should be equipped with a pull -line switch and a dark application wiring. You need to choose a dark key switch.In addition, the switch of Outdoor wall lamps needs to ensure whether the operating tissue response of the switch is sensitive and light, and can it instantly achieve the effect of switching at will.

After the position and lighting of the Outdoor Wall lamp are determined, the first thing to install is the work of the Wall lamp. At the beginning, the method of using the embedded parts or punching is fixed.On the wall, try to work first.

precautions for the installation of Outdoor wall lamps

1. Outdoor Wall lights can be installed on the wall or on the pillars.When installed on the brick wall, you must raise wooden bricks or metal components when building walls. When installed lamps, fix the lamps on wooden bricks or metal components.The component may use the hug to fix the metal component on the pillar, and then put the Outdoor Wall lamp directly on the metal component.

2. The height of the bottom along the Outdoor Wall lamp is 1.8m. The height of the Outdoor Wall lamp device on all sides can be different, but the height of the Outdoor Wall lamp on the same wall needs to be common.

3. The structure of Outdoor wall lamps should be adapted to the environment of the device venue. The good choice of a closed switch. Because the Outdoor should often appear in rainy sun and sunburn.

4. Outdoor Wall lights should be selected from the type of switch according to the wiring method.In the open wiring, the pull -line switch should be selected, which is both economical and safe.The dark application line should be dependent on the wiring situation. If the dark wiring in the wall can be selected, the embedded dark key switch can be used.

5. The operation organization of the Outdoor Wall lamp switch should be sensitive and light, and its action is completed by the instantaneous conversion organization.In addition to the pull -line switch and dual -control switch, the connection and disconnection of the contact should be significantly marked.

6, Outdoor Wall lamp line switching lines should be used for insulation ropes, the length is not less than 1.5m, the line tissue and the pull rope should not fail for 1min with 98n force.

Outdoor Wall lamp classification

1. European Wall lamp

The European -style Wall lamp originated in the 1980s, mainly with the representative of the decorative application in the British royal family.It was not recommended to China in the early 1990s.It has not been applied in the domestic decoration industry in the past two years. It is mainly applied to the decorative engineering of star hotels, senior clubs, and villas to reflect the grace and luxury of the European aristocracy.

2. Rural Wall lamp

The entire room reflects a strong humanistic atmosphere, which complements the simplicity and nobleness.It makes the whole room feel very charming.

3. crystal Wall lamp

crystal Wall lights add a little aura to the current simple space, so young people usually prefer crystal wall lamps when buying Lights.Bright and gorgeous crystals give people a solemn and luxurious feeling.

4. Modern Wall lamp

Use a variety of bright flower elements to decorate the spring bedroom, and decorate an elegant arc Wall lamp on the bedside, making the spring bedroom more elegant and romantic.

What is a Wall lamp

Washing wall lamps, as the name suggests, let the Lights wash the wall like water, mainly used for building decoration and lighting, as well as outlines for outline large buildings. Becauseled It has the characteristics of energy saving, high light efficiency, rich color, long life, etc. Therefore, other light sources with wall lamps are gradually being led Washing lamp instead, led The technical parameters and the technical parameters of the Wall lamp lamp lamp led The lamps are generally similar.

The manufacturing step of the Wall lamp lamp

1. First apply a bit of heat -conducting glue on the intact aluminum -based plate, which can help the wall washing the heat sink to dissipate heat, and then put the lamp beads on the ground welded one by one.

2. Put the shell of the wall washed on the welded lamp bead and seal the two grooves next to it.It is convenient for gels when it is filled with glue

3. Those who need to irrigate are the easier -drying silicone (white gel or vinyl) that is easy to dry into the Wall lamp.

4. After these silica gels are dry, check the lamp beads carefully if these glue is covered.

5. Just cover the glass of the Wall lamp and put it on the head.Water washing lamp is made like this.(These lines must be connected in the head of the group before the group head)

6. The last link is aging packaging.

How to install the Wall lamp

1. Do the work before installation according to the position placed by the power supply;

2. Fix the lamps with screws firmly;

3. Connect the lamp with the power cord firmly, and wrap the waterproof tape without the wire head;

4. When installing the wiring, a branch power supply is connected to a maximum of 8-10 wall lamps; or after 50 meters, connect another power cord.

5. After the installation is completed, please check the installation line to confirm that the installation is correct. After no electrical short circuit, the corresponding control power supply is connected;

6. If there is a problem in installation, please consult our technical personnel.Or log in to the Website of lighting Enterprise lighting directly