How to use the correct use of simulation garries

1. It is strictly forbidden to smoke to discard the cigarette butt on artificial lawns to prevent corrosive food and beverages((Such as acid -base drinksCureContact Artificial lawn.

Second, keep neighboring Artificial lawn areas without garbage, fragments, mud, dirt and oil spill.

3. In terms of Artificial lawn paint, exercise logos are used to repair small damage in time.

Fourth, do not stop the vehicle on Artificial lawn, especially in high temperature days, or to stop the vehicle on the humid Artificial lawn for a long time, it is not conducive to Artificial lawn maintenance.

Fifth, if the Artificial lawn venue is over negative and heavy, the venue should be specially arranged to protect the grass Skin with plywood and fiber.

6. Observe the maintenance and cleaning procedures of artificial lawns, keep the Artificial lawn venue clean, and clean the Artificial lawn venues when needed.

7. Ensure that there are sufficient trash cans on Artificial lawn venues for sports personnel.

8. Properly control the frequency of use of artificial lawns.

Nine, snow and snow weather should be removed in time to remove snow on the Artificial lawn venue.

X. Special arrangements should be available in Artificial lawn venues to protect artificial turf and observe the maintenance and cleaning procedures of Artificial lawn.

kindergarten Artificial lawn maintenance

1, Artificial Vork Revisive:

Within six to eight weeks after paving, we need to clean the Artificial lawn every week, sweep the gravel to ensure that the straw stems are upright and gravel. The purpose is to maintain the height of the gravel18to20Millimeter level.Snow in Yuetian immediately stepped on, and the surface of the surface was scanned before using it.Artificial lawn should be used after use3arrive6Rinse with water for a month to keep its original color, so that quartz sand can be appropriately settled, and the lawn stabilizes the lawn.

2Foreign objects in artificial lawns:

Leaf, pine needles, nuts, gum, etc. can cause tangled, spots and stains, especially before exercise.This kind of foreign body should be avoided by the damage to artificial lawns.

3, Artificial Capture Water Seepage:

It is necessary to prevent external sewage from penetrating into the lawn and rushing to foreign objects.A circle of border stones (roads) on the edge of the lawn can prevent sewage from penetrating.

4precautions for the use of Artificial lawn venues:

The Artificial lawn sports field is only used for physical education and athlete training competitions. It is not allowed to do other purposes. You must wear professional sports shoes in the field.Bringing cigarettes, fire types, bubble sugar, organic solvents, and chemicals are processed into the field.Prohibit7mmLong nail shoes run on the lawn; prohibit any motor vehicles from driving on the lawn; forbid heavy objects to be placed on the lawn for a long time; prohibit the boundaries of the edge of the Artificial lawn by intentionally;Go on.

How to maintain Artificial lawn

1. Cooling

When the summer climate is cool, the surface temperature of the Artificial lawn is relatively high. It does not absorb calories to reach the cooling effect like natural grass. After all, the Artificial lawn isPEPolyethylene material, after high temperature exposure, the Artificial lawn will add thermal effects. In such a high temperature environment, it is easy to play with the physical discomfort in the athletes and then reduce the quality and interest of the competition.Therefore, the surface temperature of the decline of Artificial lawn is an important process of summer protection. Now it will generally decrease the temperature by watering the venue. This method is currently more useful.The professional league competition will be watered to the place before the premises to reduce the surface temperature.But the spray must be uniform and not too much, just spray the scene to moist.

2. clean

Various wastes will inevitably occur in football venues. Whether it is Artificial lawn or a place where natural lawns is needed, it needs to be cleaned. If it is simply floating and dust, natural rainwater can be cleaned.However, there are also many plastic waste, paper dandruff, peel and other waste demand for finishing and cleaning.Therefore, the protection operation of football places is necessary to include regular cleaning content.

Three, drainage

summer is also a dry season, and generally the dry season will gather4-10Between the month, especially the dry season in the South China region, there are many climate, so that it has a great impact on the drainage system of the Artificial lawn. Generally, small and small rain has no significant impact on the Artificial lawn place.When the lawn is built, a drainage system is made, and there is a small drainage hole on the back of the lawn. Generally, small and medium rain will not affect the Artificial lawn. Basically, the accumulation of water in the place can basically be discharged.However, there are often heavy rainstorms in the summer, so that the rainfall of the large lawn is not so fast, so that the lawn will be swallowed by floods, rubber particles and quartz sand are washed away, resulting in severe damage to the lawn of the venue.Therefore, the summer Artificial lawn protection drainage is essential.

Four, dehumidification

We all know that the air humidity in summer is relatively large, especially in the south, and the relative humidity is often very high.PECommonly known as plastic, fiber is very simple to reproduce and reproduce algae in the environment with relatively large humidity. If the algae category will become very slippery, it will simply make the athletes fall in the movement of the movement.So how to dehumidify has become a major problem for many builders.Decar dehumidification is also an important thing for summer Artificial lawn protection!

1. What is the material of children's slide

Children's indoor slopes are divided into materials: single -layer glass rigid, double glass rigid children's slide, wooden children's slide, engineering plastic children's slide, imported engineering plastic children's slide, and even ice made.The more common production materials are wood, metal, plastic, and rubber.

1. Plastic material

Plastic materials are a commonly used material for slide equipment, because it can be presented in a very bright way, just catering to children like colorful preferences.Moreover, the abrasion resistance of plastic materials is relatively good. It can be put into use for a long time without bringing much trouble to the subsequent use.It is more important. Plastic materials are more composed of environmental protection requirements. Children will not have injuries on this material, which can play a good role in protecting.

2. Wooden material

Wooden materials are actually relatively recommended, but the degree of popularity in the actual market is not very high.Because wooden materials are difficult to create a high -end appearance level, many users are unwilling to choose such materials.However, the advantages of wooden materials are indeed obvious. On the one hand, the texture is relatively soft to avoid injuries during the movement of children.It also meets the general environmental requirements, so that this device can be closer to natural.

3. PVC material

PVC material is a new type of material, which is indeed reasonable to use on the slide device.Because its overall quality is light, it is satisfactory.More importantly, users can transform the mentality of this material according to their needs and ideas, which will bring more creative slide appearance.This is also a place that users are very concerned about now, which can make their choices full of more flexibility.

4. Stainless steel material

Stainless steel slopes usually use 304 food -grade stainless steel. From the material aspect, consider its safety. Compared with the plastic slide, it has high hardness, abrasion resistance, and easy maintenance.Stainless steel slides are divided into half barrels, full barrels, translucent, flats and other style slides, which are suitable for many application scenarios such as large commercial super, community, kindergarten, scenic spots, villas, and many other application scenarios.

Second, the structure and material of the slide

There are many materials for children's Park slides. Common slide components include the following:

1. Pillar material, generally uses a thickness of 114mm in outer diameter and 2.6mm. The surface is generally used for treatment with Polyester/TGICSYSTEM or resin powder.

2. Platform material, generally use a cold -rolled steel plate with a thickness of 2.6mm; the surface is generally used with a protective layer or resin paint for the heat -immersed plastic.

3. Material of the steel pipe accessories, generally use the outer diameter of 26.8/33.5/42.3/48.0/60.0 2.3mm welded pipe; the surface is generally used for treatment with Polyester/TGICSYSTEM or resin powder paint.

4. Material of plastic accessories. Generally, low -density polyethylene (LDPE) is used to add anti -ultraviolet stabilizers and electrostatic spray plastic (POWDERCOAT); the surface is generally used for treatment.

5. The column cap is generally used for cast aluminum alloy; the surface is generally used for the Outdoor polyetter/tgics system or resin powder paint paint.

6. Material of lock snail accessories, generally use aluminum alloy; on the surface, mechanical polishing treatment is generally used.

7. Materials for hardware parts, generally use SUS stainless steel semi -round heads, T -type flat head screws;

3. How to choose kindergarten slide

1. Choose a relatively Smooth slide

First of all, the surface of the kindergarten must be Smooth to choose the surface of the children's combination slide, otherwise some children will have a danger due to too much friction when they are playing.In addition to these, you should also pay attention to the equipment without protrusions, especially whether there are some sharp parts exposed to the outside, avoiding some children from scraping clothes or scratching the Skin when they decline.

2. The material must be firm

The material of the children's combination slide must bear the weight of the child, otherwise some safety hazards will occur when the child is playing on the combination slide.It is best to choose a high -quality slide. This will not only play for a long time, but parents will be more assured.

3. Have a buffer device

Whenever a qualified children's combination slide, there must be a mature buffer device.Generally speaking, the buffer device is a pile or cushion. These are to prevent the child from being directly exposed to the ground due to excessive force when playing slide.In addition, the corresponding protective nets need to be installed in various areas of the slide to prevent some children from falling directly from a high place.Therefore, whether it is a buffer or a protective network, these are the essential elements of children's slides.

4. The slope cannot be too large

The slides are declining from top, and there will be a forward trend in the process of sliding. Therefore, pay attention to the slope of the slide during the process of considering the sliding slide, and choose some slow slopes.

5. Have a beautiful appearance

The color of the children's slide can be very bright, and the bright the color, the stronger the child's interest.Especially for some unique slides, they are loved by children.Therefore, when you see these shapes with different shapes and bright colors, children cannot control their inner joy and excitement.This is also an important reason why Amusement City and the Park set up slides.

6. Choose a regular slide manufacturer

It is best to choose a unit with the following units with the following qualifications: units with quality certification (ISO9000-2000).Units through environmental certification (ISO14001-2004).Units that have passed national compulsory security certification (3C certification).Units that have passed third -party security certification (CE certification)

1. precautions for the safety of kindergarten slide safety

In order to allow children to play well and pay attention to safety, they generally take the following methods: one play, two, and three.

1. Play.Before playing large -scale toys in kindergarten, we remind young children to pay attention to protecting themselves, but also pay attention to the safety of others.Children have fun, especially when playing slide, they always come up with many different ways of gameplay. Some of their heads fall, and some climb up from below. To be honest, I really want to stop them.But I still control myself and remind myself to see it carefully.It turns out that the children have nothing to do at all.

2. Two saying.After playing large -scale toys in kindergarten, we asked the child to stop for a while and asked them what happened when playing.At this time, there would be a child to sue, saying that XX children hit someone, saying that XX children rushed to play, etc.This is where you need to pay attention in the game.As a result, according to what the children said, we made a request for playing again.

3, play again.Since there are new requirements, everyone must follow.So when playing again, those unsafe behaviors will not happen.

Second, kindergarten slide safety alert

1. Do not gather, not crowded, not anxious, safety is first.

2. Play the slide, don't be crowded, you modest and let me let the first.

3. Be careful when you slide up and down the ladder.

4. security comes from long -term vigilance, and the accident originated from instant paralysis.

5. Play the slide safely and orderly. If you do nt squeeze up and down, you ca nt wait for you.

6, play slide not to make trouble, open happiness and not hurt.

7. Protect you and me, depend on everyone.

8. The slide is not flat ground, climbing down and sliding down and not making trouble.

9. Up and down, pay attention to your feet.