Articles in Tags kitchen cabinet

1. The installation method of the Wall cabinet

To know how to remove the Wall cabinet, we must first know how to install it.

1. Three -in -one connector on the bottom plate and foot strips.When installing a triple -and -one connector, the direction of the screws of the three -in -one connector must be upward, and then fix it with a Tool. If the direction is wrong, the screw will not be fixed.

2. Lock the foot on the Wall cabinet on the short foot, and then lock the foot strip on the bottom plate. After the pores are aligned, the screws are tightened, and the moisture nails are nailed to the bottom of the base. At this time, the bottom plate is completed.

3. Three -in -one connector on the bottom plate and partition, fix the back panel and the middle backboard, connect the side plate and the back plate, form a binding body, and then install the binding of the side board and the back plate.Put the back panel with a ventilation hole, and lock the inheritance board between the side board and the partition.

4. Make trousers.First put on the sliding rail and lock it, and then put the partition and lock it on the sliding rail. After the connector on the lock pants rack, lying on the panel and install the guide rail.Gently push in.

5. Make a storage drawer.First fix the two sections of the rail strip on the side board, put it in the Wall cabinet, and then make the drawer, set the guide rail, push the drawer gently, and then adjust the drawer.Take out the screws for displacement and reinstallation.

6. Install the top plate, put the door panel on the door, and lock it on the side panel and partition.Fix the back panel and finally put on a breathable cover. At this time, the installation of the Wall cabinet has been completed.

Second, the way of disassembly of the Wall cabinet

After knowing the installation method of the Wall cabinet, the disassembly method of the Wall cabinet is much simpler, mainly based on its installation method and then reversed back from the last step.Prepare the disassembly Tool, such as the electric drill and a word, etc. From inside to the outside, from top to bottom, remove the screwed screws and disassemble them one by one.First remove the breathable cover, then unscrew the screws of the back and the top plate, then the storage drawer, and then the trousers, bottom plates, solid boards, feet strips, etc.Just disassemble the reverse order installed in the installation.

3. How much does the Wall cabinet be removed

How much money is depending on the different places? Therefore, the work consumption of the master's Wall cabinet is also different.Generally, the price charged by an ordinary Wall cabinet is about 80-200 yuan.

1. How to design embedded closet

1. First of all, measure the size in advance, and decide how big the planned and designed closet is planned according to the size of the house area.

Unlike other furniture products, it is not directly placed, but embedded in the wall.Therefore, the problem of designing size is crucial, so that the closet can be used to get the best use and show the advantages.It is very worthy of saying that according to the advice of professionals, making embedded closets in the living room wall is a very good choice, which can make the effect of the closet to the greatest extent, and can also increase the beauty of the living room and strengthen the decorative effect.

2. Secondly, it should be designed for professionals to build professional decoration personnel.

Some people will choose to decorate themselves and build themselves. The fact is that for people who lack experience, designing closets is quite difficult, it is difficult to design beautiful and practical closets.Therefore, hiring professional designers is very helpful for designing novel, unique, and practical closet.Not only that, the price is not as expensive as people think.

(Embedded closet decoration renderings.

two,Embedded closet designstep

1. Wall cabinet: For the room (or the room of the entire wall as a wardrobe) in the structure of the structure, install a combined partition in the concave wall, and then install a closet door to become a beautiful and durable wall cabinetEssenceThe wall in the cabinet can be directly scanned with the inner wall paint or pasted with wallpaper.

2. Rail: The size of the orbital box of the upper part of the Wall cabinet should be guaranteed at 12 cm high and 9 cm wide.Like the curtain box, the rails are installed in the rail box to hang the sliding door on the track.

3. Plumb door: The golden size of the normal door is about 80 cm 200 cm. Under this structure, the door is relatively stable.If there is a height higher than 200 cm, or even higher, the sliding door is best to narrow the width of the door or make a few more sliding doors under the premise of keeping the area unchanged to keep the door stability and use safety.sex.The use of suspension sliding doors needs to be reinforced at the top. Generally, the inside of the large wooden structure sliding door also needs to be reinforced with Steel Structure, and then other production is taken outside.

Yi Belle Full House Custom -Tang Feng Hanyun Series

Those who do not set up color, it is called the white drawing

Simplified lines with ink color lines

One stroke is full of wind

Dan Qingliao pen, elegant and elegant flowers

The ink dye is the scene, the frost and snow is boundless

Show of Yoshi Mountains and Sichuan is presented

The graceful picture jumps in front of you

Independence and prosperity, I am self -reliance

Style characteristics: fashion, modern Chinese style

Application material: Water Qu LiuBaiyan board black aluminum alloy edge door panel

The perfect combination of Wall cabinet installation skills and functions

The Wall cabinet is a relatively special type in the cabinet. The cabinet of the Wall cabinet can be a sandwich or a wall. It is a model that makes full use of the kitchen space.Ideal choice.However, when installing the Wall cabinet, it is also particular about skills.

The perfect combination of Wall cabinet installation skills and functions

FirstThe cabinet of the Wall cabinet can be a wall or a sandwich, which can ensure the effective use of space and not deform.However, it is necessary to achieve the horizontal level and the vertical on both sides. If there is an error, the height difference between the left and right sides of the left and right sides is required. The bottom wheel of the Wall cabinet door can make up for the error by debugging the system.

secondThe installation home cabinet of the interval generally has drawer design. In order not to affect the use, pay attention when designing the position of the drawer: you should avoid two intersections when making three sliding doors;On the side of the door; the drawer should have 17cm gap between the side wall of the drawer when making a folding door.

thirdWhen installation of the orbit, it is necessary to reserve the size of the track.The installation of the Wall cabinet door is generally completed by professionals.

fourthThe installation of the Wall cabinet door is generally completed by the professional staff. The steps are: first fix the top rail, the surface of the track front is on the same plane as the cabinet surface, and the upper and lower rails are placed in the reserved position; then the upper and lower rails are placed in the reserved position; then the upper and lower rails are placed in the reserved position;The two doors are loaded into the rail, measured the verticality of the door body with a horizontal or straight ruler, adjust the position of the upper and lower rails and fix it; to check whether the door body is parallel to both sides, the door body can be adjusted by adjusting the bottom wheel to achieve the frame to achieve the frame.With the level on both sides; finally fix the anti -jump device and show the quality protection book.Users can inspect whether the selected Wall cabinet door brand is professional according to this installation program.

1. What are the styles of the Wall cabinet door?

At present, the materials that can be made on the market on the market are basically two types of plates and glass, or the full board, or all glass, or the plate and glass.

1.

Because of its texture, sheets give people a natural and simple sense.On the board, the merchants mainly push two different routes:

(1) The young and fashionable colors, light blue, light green, pure white, cartoon patterns, etc., can make the young and stylish heart experience different moods in pursuing natural feelings.

(2) Continue to take the old route, imitation mahogany's Wall cabinet door, naturally rustic mahogany texture can be chaotic, and the classic taste is revealed between movement.

(3) There are also some different styles, such as introducing traditional weaving processes and using the extremely natural wood -colored wooden woven door panels to make the door outside the door.The favors of the person; the characteristics of the louver style Wall cabinet door are still the focus of some merchants.

2. glass

The glass gives a kind of crystal clear or hazy and concealed illusion. In the use of glass, the merchants have also worked hard. The transparent glass, frosted glass, silver -plated glass, and cloth glass of glass are all all forms of glass.Apply on the door of the Wall cabinet.

(1) Recently, the Wall cabinet door on the market has incorporated polycrystalline glass and enhanced glass into the new variety selection.Polycrystalline glass is processed by ordinary glass. On the other side of the glass, it is made of high -tech and special materials. The color and patterns can be selected arbitrarily, which can be very selective.

(2) Strengthening glass is close to tempered glass. When the merchants launch this enhanced glass, a film is added behind it. Its strength is equivalent to five times that of ordinary glass, and the safety performance is extremely high.

(3) The use of two pieces of patterns between the two pieces of glass is still the practice of merchants this year. For example, the silk, gauze, fabric, wallpaper, etc. are greatly enriched on the glass of the Wall cabinet door.The room for consumers is much larger.

How to choose the Wall cabinet door

The color style of the Wall cabinet door is diverse, but after all, it is just an article limited to the door. In the era of paying attention to home integration, the brand Wall cabinet door has officially launched its cabinet, floor, bed, bed, bed, bed, bed, bookcase, etc. For consumers, as long as you like your favorite color, you can choose products with extremely uniform home styles.Running in major Building Materials markets.

Today, there are many merchants engaged in the door of the Wall cabinet in the market. The price ranges from more than 100 yuan to more than 1,000 yuan per Square meter.To pick up the cost -effective Wall cabinet door in many businesses, in addition to the selection of styles, the most important thing is to depend on the material of the product.

1. Gatefront and track of the Wall cabinet

At present, the frame materials used in the Wall cabinet door on the market include aluminum alloy, carbon steel material, aluminum titanium alloy and magnesium titanium alloy. The latter two materials are the most durable.The thickness of this border is generally 1 mm, and it is difficult to guarantee that the thickness of this thickness is below this thickness.The quality of the track also directly affects the effect of sliding.It is understood that at present, there are two types of tracks of the Wall cabinet door: cold -rolled steel track and aluminum alloy orbit.

2. Plug

The key to whether the Wall cabinet door can be used for a long time is the quality of the pulley.The door of the Wall cabinet usually achieves a height of 2.4 meters or more than 2.4 meters. The door fan is wide and the self -weight is very large. If the bearing capacity of the bottom wheel is not enough, it will greatly affect the service life.At present, the material on the market is generally two types of plastic pulleys and glass fiber pulleys.The plastic pulley has a hard texture, but it is easy to break. The use time will become astringent, hardening, and the push sense will become poor, and the price will be cheaper; glass fiber slids are tough and abrasion -resistant, Smooth and Smooth, and durable.When buying, consumers must recognize the material of the pulley.

3. The thickness of the door panel

For wooden boards at the door of the Wall cabinet, it is best to choose the thickness of 8 mm to 12 mm, so that it is more stable and durable to use, and the thickness of the glass is generally from 5 mm to 10 mm. Too thick and too thin will cause use.Unsafe.

4. Sealing

In order to ensure that the two doors are staggered and closed, all sliding doors products will be interval. Generally, the external pulley needs a 15mm interval. This interval affects the sealing of the sliding door.Although most products are added with hair, the denseness and gap between the wool strips used in different products are still relatively large.Try to choose products with small interval and dense hair strips.

Of course, the quality is good or bad, and there is no voucher in the mouth, and the on -site inspection is important.The good Wall cabinet door will not be too light or too heavy when sliding, but the self -weight of a certain door. There is no vibration when sliding, Smooth and textured.

3. How to install the Wall cabinet door

1. First fix the top rail, the surface of the track and the kitchen cabinet cabinet is on the same plane, and the upper and lower rails are placed in the reserved position;

2. Then put the two doors into the track, measure the verticality of the door body with a horizontal ruler or straight ruler, adjust the position of the upper and lower rails and fix it;

3. Check again whether the door body is parallel to both sides. If the upper and lower up and down occur, the door body can be adjusted by adjusting the bottom wheel, so as to achieve the level of the border and the sides;

4. Finally, the anti -jump device is fixed and the quality assurance is presented.Users can install the program according to this to check whether the selected Wall cabinet door brand is professional.