1. What light is suitable for the study?

1. table lamp

LED light sources in the study are relatively common.However, the bad LED light source may have a glare, and it will have a bad effect on the eyes. Therefore, when choosing the LED light source, you must be very careful.

2, ceiling lamp

The lighting of the study is not suitable for too large, nor is it suitable for too small.The main light can be used to use the ceiling light.

3, floor lamp

If you have a reading sofa chair in the study, you can place a floor lamp next to the sofa to provide local reading lighting.

4. Shooting Lights

Small shooting Lights can be installed in the bookcase, which can be decorated with bookcases, which is also convenient to find books.

2. How much watt is fit for the study?

Generally, the lamps of the study are almost about 40 watts.

3. The main points of design of the study

1. Add table lamps to the desk to strengthen reading lighting

If you want to sit in front of the desk, only indirect lighting is not enough. It is best to set up a table lamp at the corner of the table, or set up a Hanging lamp on the top of the table for key lighting.Especially when there are children in the home, in addition to the desk design must be adjusted with it, at the part of the local light source on the desk, it is best to choose an electronic table. It is best to try whether there will be flashing before purchasing.The situation occurred.

2. indirect light source to enhance the quiet atmosphere of the study

Indirect lighting can avoid the visual dazzling damage caused by direct light radiation, and it is a bit tired to turn the Lights on the light, and it will not want to be in this space for too long. Thinking is not easy to concentrate.Therefore, in designing the study, it is best to treat the indirect light source, such as the hidden light source around the ceiling, so that the calm atmosphere of the book can be set up.

3. Use rail Lights to direct bookcases to create visual scenes

Bookcases can also create interesting effects through light changes. For example, through the design of orbit Lights or embedded lamps, let the collection or items on the bookcase on the bookcase change the visual focus of the end view.

4. Aversion of light source direct computer screen

Because the computer screen itself will emit strong light, if the light of the space is too bright, it will reflect on the screen, the eyes are easy to be uncomfortable, and the words on the screen cannot be seen.But if the computer screen is only on, and the surroundings are darker, the vision is prone to fatigue.Correct practice: It is not allowed to make the brightness of the two from dark, and the brightness of the two should be similar. When reading the text in the computer for a long time, it is not easy to get fatigue.

5. Keeping natural light is important

The study room is suitable for reading. It is best to build the location of the study in the place where there is a natural light source. Even if it is shared with other spaces, such as the master bedroom or the corner of the living room, the location of the desk is best to be close to the window.In addition, the design of the study of the natural light source can be adjusted through the design of the shutters.

Most of the study decorations are elegant and quiet, giving people a quiet and calm feeling. Only in this way can it be more suitable for quiet reading.The design of the study of the study is the focus of the study in the study. Similarly, the lighting design in the bedroom, living room and other rooms also deserves our attention.

1. What is special lighting

Special lamps are lighting appliances applied under special lighting conditions, such as in the environment of explosion -proof and anti -static, these special environments have corresponding technical requirements.

2. Types and applications of special lighting

1As well asProjection lamp lighting

Light projection is the use of Outdoor projection dedicated equipment, using the principle of optical projection, and using high brightness light sources to project the content on the wall of the building wall, so as to form an image technology.This technology can be applied to the Outdoor environment: the exterior wall of the building, the public building, the stadium, and can also be used in the indoor environment, such as large exhibition halls, museums, theaters, warehouses, etc.

2As well asOptical fiber lighting

The application method of optical fibers in lighting is divided into two types, one is the endpoint glow and the other is the body glow.The part of the endpoint luminescence is mainly composed of two components: optical projector and optical fiber.The projection host contains light sources, reflexes, and color filter.The main purpose of the reflector is to increase the strength of the light, while the color filter can be evolved in color to transform different effects.Body light is the optical fiber itself, which will form a flexible light strip.

3As well asoptical fiberWater view lighting

Because the fiber has the characteristics of hydrophilicity and its optoelectronic separation, it can easily create the effect of the designer in terms of lighting, and on the other hand, it does not have the problemConsultation.In addition, the structure of the optical fiber itself can also be matched with the pool, making the optical fiber body also a part of the water scene. This is an effect that other lighting design is not easy to achieve.

The lighting of the pool is also popular nowSPAThe lighting of the occasion and the application of optical fiber can be said to be the best choice.Because this is the place of human activity, the consideration of security is much higher than the above pool or other indoor places. Therefore, the optical separation characteristics of the optical fiber itself and the diverse color performance effect of color can also meet the needs of this type of place.

1. How high the landscape lamp is generally

The Landscape light must choose the appropriate light column height to ensure uniform lighting.The height of the landscape lamp is related to the purpose. The general Landscape light is about 3 meters. The space of a large number of people is generally about 4 to 6 meters.

Second, how much is the landscape lamp spacing appropriate

1. Light lawn Lights on all sides. Generally, the 18W energy -saving Tube light source is used. It is suitable for various garden gardens, sidewalks and trail lighting. It provides pedestrian night lighting. The lighting time is usually 18: 00 ~ 6: 00.The distance between the commonly used lamps is 6 ~ 8 meters, and there is no clear specification from the roadside, but it is generally designed between 0.2 and 1.5 meters.

2. One -way outlet light lawn Lights are used in wider roads and use 26W energy -saving pipes or 35W gold halide lighting sources.The distance between the commonly used lamps is 8 ~ 10 meters, and the generally designed between 0.5 and 2.0 meters.

3. Garden Lights generally use 70W gold halide lighting sources. It is suitable for activity gardens, wide sidewalks, and lane lane lighting in the community. The distance between the lamps is usually 10 ~ 15 meters.It can also be evenly arranged in the center of the courtyard according to the number of lamp design without being restrained by the roadside distance.

4. Other Landscape lights, generally choose from the project style, the preferences of the owner, or the non -standard design. The distance from the roadside is generally between 1.0 and 2.0 meters.

5. The street lights of high light rods are used with 150W gold halogen lighting sources. The distance between the lamp is usually 15-20 meters. Generally, it is set in the road isolation Belt. The distance from the roadside should be determined in conjunction with the width of the road isolation Belt.

6. In addition, some special lamps, such as aluminum cast lampstrangle, explosion -proof glass lamps, surface -shaped landscape style lamps, etc., often set up directly on the edge of the garden road, corner of garden roads, small trails, light dead corners, etc.What distance is left to the roadside.

What is the sun jar

Sunshine tank is a small jar stored in Sun Jar produced by Suck UK. Using the principle of photoelectric conversion, solar energy and other light can be converted into electrical energy, stored in batteries.Power, adding frosted glass, will emit warm light.

The internal light control sensor element of the sun tank is automatically closed or turned on according to the environment brightness.In the daytime or there is a lighting environment, it turns off the power; at night or the dark environment, it automatically turns on the power.With sufficient sunlight for 6-8 hours, it can glow for about 15-18 hours in a row.

How to use sunshine can

1. Light color switching

The product has blue and orange Lights (users can set one of the glowing colors at will). After the metal bottle buckle is lifted, the upper glass lid of the product is turned on, and the light switch switch can be seen.Dial the switch to one side of the left and right, and the product can be replaced.At the same time, the product itself has an automatic sensing device, which can automatically cut off the power when light is strong.The power can be automatically connected when the light is dark.Automatic induction device can better save battery.If the switch is dial to the OFF gear, the product stops glowing to completely cut off the power.

2. battery replacement

When the product is lit, when the light is insufficient, the product switch can be dial to the OFF gear, and the product is placed in the range of the sunlight, so that the product can absorb light energy and save new energy.After long -term use of the product, the battery capacity may decline.Users can open the product glass lid and take out the Solar absorption board in the can, replace the battery on the back of the Solar absorption board. The battery can only use AA -level 1.2V to charge Solar -specific batteries.After replacing the old battery, please pay the professional waste battery recycling department, and should not be arbitrarily discarded to cause environmental pollution.

3. Switch

Open the lid of the sun, there is a small white switch inside, press it to "open", and then press the bounce as "level".After turning on the switch, the sun tank will automatically induced the environment of the environment and darkness. When the environment of the environment is dark, the jar will automatically start.The Solar collection process is not controlled by the small white switch, that is, as long as there is light, the sun can start collecting.

4. Charging

It is recommended to use the sun tank for the first time in the sun for three days or longer, and then it can be glowing for about 6 hours at a time after each time it is irradiated (the light emitting time is related to the intensity and time of light.Proper extension of the exposure time).The jar can also be charged under ordinary light, but some charging time is needed.

5. precautions

Domestic sales are mostly imitation sunny pots. The quality of batteries is uneven. It is best not to charge it under the Outdoor martyrs, so as not to be wet or exposed to the sun. Generally, it is advisable to place the rainwater by the window.

How to make sunny jars

Prepare a glass tank, ready -made Solar panel, rechargeable battery, and circuit part.In short, the handmade production of the sun jar is to put a solar energy storage device LED for glass can, but in fact, it is not simply connecting photovoltaic batteries and rechargeable batteries with LEDs.The power of Solar cells, the output voltage is not high; in addition, the optical control circuit is needed to control the LED only at night.

How to choose the aisle crystal Wall lamp

1. The quality of the lampshade of the crystal Wall lamp

When buying wall lamps, first look at the quality of the lamp itself. For crystal lamps, its lampshade is usually made of glass (of course there are real crystals, but the price of this material is relatively high), and the bracket is generally metal -madeIn success, the quality choice of the lampshade mainly depends on whether its light transmission is suitable, and the surface patterns are echoing with the overall style of the room, and the metal material of the bracket is good.etc.

2. Pay attention to installation space

crystal wall lamps usually appear in several home spaces such as living room, bedroom, and corridor, but the effect it produces in each space is different.When appearing in the corridor, the Wall lamp is almost the protagonist in this space. Its role is equivalent to a mural under the Lights. This Wall lamp can be based on your aesthetic taste, or choose the classical iron lamp in Europe.Or choose a modern aluminum profile space Wall lamp, and you can also choose a bird's nest -like rattan rattan lamp.

3. Pay attention to the style of crystal Wall lamp

For home decoration, generally pay attention to mutual matching, so when choosing home crystal wall lamps, the most important thing is to consider whether to match the home style. Generally, the crystal lamps are mostly European style., Mediterranean style and other decoration styles to match.

4. Pay attention to the material of the crystal Wall lamp

The material of the Lights often shows a certain style, and the gorgeous and splendid of the crystal Wall lamp is settled in the luxurious style.The gold -plated copper wall iron Wall lamp shows a simple and elegant style, and the natural material lamps give people a simple and natural feeling.In terms of color matching, we pay attention to the cooperation of light and color, and create the cold and cold tone required by different seasons by combining Lights.

Several types of general aisle crystal wall lamps

1. Yellow lampshade

The Wall light reflects the yellow light source, and it is irradiated with yellow and white transparent glass. The lighting function is not too strong, but it can meet people's daily needs.The unique style of the aisle crystal wall also adds a hint of warmth to the home. It walks across the empty promenade. With warm light sources accompanied, the mood will be comfortable.

2. European style lampshade

crystal is generally transparent lampshade and a few crystal -clear pendants. It is elegant and fashionable, and the soft light makes the home look particularly warm. Even if it is late from get off work, there is still a light guidance to you home.

3. Round heart lampshade

The yellow -white round heart lampshade, the dazzling crystal pendant, shining under the light of light.The narrow aisle has also become so attractive, adding a lot of points to the entire home environment.

4. Light -colored lampshade

The light -colored lampshade can more concentrated the light source to the place where the light is needed, and it is most suitable for places such as aisle, porch or corridor.Fashionable and simple design, high and low crystal pendants, very elegant and fresh.