What is the general height of the Wall lamp in different positions?

1. General Wall lamp installation height, that is, 2240 ~ 2650mm from the ground.The Wall lamp in the bedroom is closer to the ground, about 1400 to 1700mm.The distance from the Wall light to the wall is about 95-400mm.

2. The height of the Wall lamp in the corridor and the corridor should be slightly more than 1.8 meters high, that is, 2.2 to 2.6m from the ground.

3. If the Wall lamp in the working environment is 1.4 to 1.8m from the desktop, the Wall lamp on the bedside bedside is about 1.4 to 1.7m.

4. The distance of the Wall light is about 0.09 to 0.4m.

Where is it suitable for installing Wall lights

1. bedside

Because it is auxiliary lighting, the bedroom bedside needs the help of wall lamps, because the bedroom generally needs auxiliary lighting decoration. The Wall lamp installed on the bedside, it is best to choose the light head to adjust the direction.The style of the Wall lamp should be considered to echo the bedding or curtains in order to achieve a better decorative effect.

2. Corridor or living room

In addition to the bedroom requires auxiliary lighting, the general living room and the aisle are also needed to be used for assistance lighting. The lamps in these places should generally be soft, and the installation height should be slightly higher than the horizontal line. It is best to match it when used in use.Some other decorative objects, such as: an oil painting, a vase with flower arrangement, or a wall frame displayed by a artwork, etc., the effect of decoration is more delicate.

3. Before the mirror

In addition to the two spaces require Wall lamp for assistance lighting, the Mirror front light in the bathroom space can also be selected for installation. The Wall lamp installed in front of the bathroom mirror is generally installed above the toilet mirror.The style of the style can be considered to echo the handle of the faucet or the bathroom cabinet.

4. Restaurant

For small apartment types, in terms of lighting, only local lighting is often required to create a comfortable feeling. For example, a small apartment restaurant, if you choose a chandelier to decorate, the light may be too bright and dazzling, and the Hanging downThe Hanging chandelier will make the compact space more crowded, and choosing one or two restaurant wall style and color -shaped wall lamps to decorate will make some decorative scenery.When choosing a Wall lamp, you should pay attention to matching the color of the wall. It is best not to choose the color of a color system with the wall. Use some contrasting color wall lamps to sometimes have a good effect.

What are the installation steps of the Wall lamp?

1. Determine the installation location

First of all, we must determine the installation position of the Wall light on the wall, and generally determine the specific location according to the differences in functional space.For example, the bedside bedside lamp is usually between 1400 mm and 1700 mm from the ground height, while wall lamps such as balcony and aisle are often higher than that of human vision, about 1.8 meters.In fact, there is no specific restrictions on the height. Everyone can determine the installation location according to their actual situation.

2. Tag number on the wall

The position of the Wall lamp is mainly determined the position of the Wall lamp seat. When you are determined, you must make a mark on the wall and draw the holes on the Wall lamp Hanging plate to facilitate the expansion screws.

3. Use electric drill drilling

Before drilling, you should understand your own line layout diagram to avoid hitting the wires when drilling, and then use the electric drill to punch the marked mark. At the same time, pay attention to the depth of the drilling.Generally, it is advisable to not exceed the length of the expansion screw.

4, upper expansion screw

After playing the holes, insert the expansion screws into the hole, and use the hammer to hit the expansion screws into it until it does not enter the wall.

5. Install Wall lamp Hanging board

Install the Wall lamp Hanging board, fix it on the expansion screws with screws, and pay attention to the alternation of both sides when screwing, which can prevent the screw from shift and keep the Wall lamp Hanging on the level and not skew.

6. Install the lamp body

First install the Hanging panel and the suction plate with screws, tighten and fix, then disconnect the power, connect the wire of the Wall light with the power cord, and finally install the lamp body.Pay attention to check immediately after the installation is completed to see if it can be used normally.

Disclaimer: The above method stems from the index of the program system or the sharing of netizens. It is for your reference only and does not represent the research perspective of this website. It proves that it is effective. Please pay attention to the authenticity and authority of the source of the content of the content.Apply to delete & gt; & gt;Correction & gt; & gt;

1. What is the lighting light?

Detective lamp is a lamp for lighting. It belongs to special lamps. It has a powerful light source and a concave mirror that can be projected in a specific direction. It can use a reflector or lens to make the beams concentrate in a small three -dimensional corner.(Generally less than 2 ), so as to get a big light.

Second, the light source of the probe lamp

Detective lighting sources usually use LED light sources. LED probe Lights have high light effects, long service life, explosion -proof functions, and can also convert the strength of the working light at will.The place where you can move the lighting.

3. What are the use of probe Lights

As a special lamp, the invention of the probe lamp was originally used in military. Later, it was gradually used in the civilian field. The role of the visiting Lights was mainly long -distance lighting. Its use was divided into two aspects: military and civilian aspects:

1. military use

It can be used for air defense, the target of air weapons, night patrols, night air strikes against the enemy, interference of optical bombs, etc. In addition, the probe Lights are also used on tanks and airplanes for lighting.military probe Lights are a kind of weapon, which is much more complicated than civil probe Lights. The technical content and cost are much higher.

2. Civil use

Large -scale industrial and mining enterprises and construction site construction, transportation accidents, investigation cases and fingerprint photography.

Specification of Solar Lamp installation

Foundation

Determine the position of the light;1 rice 2 They are all soft soil, so the depth of excavation should be deepened; at the same time, there must be no other facilities (such as cables, pipelines, etc.) below the excavation location, and there are no long -term covers on the top of the street light, otherwise the position should be replaced appropriately.Reserved (excavation) at the location of the lamps meet the standard 1 rice 3 Pit;The embedded parts are placed in the middle of Fangkeng, PVC One end of the thread Tube is placed in the middle of the embedded parts and the other is at the battery storage office (as shown in the figure above).Pay attention to keeping the embedded parts, the foundation, and the inner ground on the same level (or the top of the screw and the inner ground on the same level, depend on the needs of the venue), one side is parallel to the road; so as to ensure that the lamp rod is erected upright and the back end is correct and the back end is correct and the back end is correct and the back end is correct and the back end is correct and the back end is correct.Not biased.Then C20 The concrete is fixed. During the pouring process, the vibration stick shakes continuously to ensure the overall density and firmness.After the construction is completed, the mud residue is left on the positioning board in time, and impurities on the bolts on the bolt are cleaned by waste oil.During the soil solidification process, watering and maintenance should be regularly; wait for the concrete to completely solidify (generally 72 Only more than hours) can be installed in the chandeliers.

installation of Solar battery components

The output of the Solar panels must take measures to avoid short connections before connecting to the controller; the Solar cell component must be firm and reliable when connecting with the bracket; the output line of the component should be avoidedTo facing the south, the guidelines are pointed at the direction of the guideline.

battery installation

When the battery is placed in the control box, it must be put lightly to prevent the control box from being smashed; the connection line between the battery must be pressed on the wiring column of the battery and uses copper pad to enhance the conductivity;After any circumstances, short connection is prohibited to avoid damaging the battery; the output line of the battery must passPVC After the threading Tube; after the above is completed, check the wiring of the controller side to prevent short circuit.Close the door of the control box after normal.

Lamp installation

The components of each part are fixed: the Solar board is fixed on the Solar bracket, the light head is fixed to the pick -up arm, and the bracket and the arm picking the arm are fixed to the main pole, and the connection line is led to the control box (battery box).Before the light rod is lifted, check whether the fasteners of each part are firm, whether the light head is installed correct, and whether the light source work is normal.Then work normally on the simple debugging system; loosen the Solar board connection cable on the controller, and the light source work; connect to the Solar board connection line and the Lights are off; at the same time, carefully observe the changes in each indicator light on the controller;Start up installation.When the main lamp rod is lifted, pay attention to safety prevention; the screw is absolutely tight. If the component is deviated, it is necessary to adjust the direction of the rising sun to the south.Put the battery into the battery box and connect the connection to the controller according to technical requirements; first connect to the battery, then connect the load, and then connect to the Solar board; when the wiring operation, you must pay attention toWrong, positive and negative polarity cannot collide and cannot be opposed; otherwise the controller will be damaged.Whether the debugging system work is normal; loosen the Solar board connection on the controller, and the Lights are on; at the same time, connect to the Solar board connection cable, and the Lights are off; then carefully observe the changes in each indicator on the controller;box.

Which Solar lamps are good?

1. First of all, consider the life of the whole light, there are several main factors:

1 As well as led The life of the Hengliu driver device

Solar street lamp manufacturers often say to the guests that I bought the best chips and the best battery, so life is the best. In fact, because the Solar street lights use DC power supply, the voltage is low and the current is large. Each component is critical.Internal resistance of a connector, the resistivity of the wire, (because becauseP Thread damage = 12R To.Of course, the main reason for the actual use has proven to affect the life of Solar street lights is to determine the life and life of the battery led Drive circuit of light source.take led For the lamp beads, led The life expectancy recognized by the lamp beads is 5 Ten thousand -10 10,000 hours, but conventional technology led There is an electronic component electronic component electronic component electronic component electronic component, the service life of the electronic component is generally 3-5 In the year, the best Japanese rubies made in electrolytic capacitors can only be used 5 The year, it was decided led Drived life, and our companys led The driver is our invention patent led Digital constant stream driving technology, it does not need electrolytic capacitors, so it is not limited by its life span. led Light beads, lamp beads led The life of the driver, the controller and the Solar panel is basically the same, and the main materials are semiconductor.

2 Another factor is the issue of battery life

Solar street lights are generally usedAGL or gel battery, conventional technology can achieve service life in 3-5 The year is already good, our technology can do it 8-10 In the year, this was because the life of the battery was mainly affected by the frequency of deep circulation and the working environment temperature. Our Solar Lamp in other ordinary solar energy led Energy saving on the street light 70-85% The patented technology greatly extends the cycle of the battery's deep cycle, thereby extending the life; in addition, the working environment temperature of the battery has a great impact on life. Our company quotes nano -technology in the battery, which can be breathable and waterproof.Below the layer, so that our battery can get the best working temperature 20-25 Celsius, and the Solar street lights of conventional technologies hang the battery on the light pole or the ground (because there is no waterproof design). It is conceivable that in the hot summer, the temperature of the battery box is so high, and the temperature rises every heavier. 10 With degrees Celsius, the battery life is reduced by half.

2. Secondly consider the brightness of the whole light

Solar street lights are not that the greater the power of the light source. Many manufacturers have falsely reported power, or buy low -luming lamp beads in order to reduce costs. In fact, the same brightness.Other companyled The light emitting efficiency of the light source is all 80-100LM/W , And high light decay, 1 The decline of the year 15%-30% , And our company led The light source selects high -quality led Chip, the low light decay structure and process of patented technology, the lighting efficiency is up to the lighting efficiency 130-140LM/W , Light failure 1 10,000 hours less than 4% After testing, the actual light failure is only 2-3% Right and right, and my company led The beads directly emit rectangular light spots, which evenly distribute all light on the road, greatly improving the efficiency and average illuminance of light source, and other companiess led The light spots emitted by the light source are round or use the lens imaging (the losses are also near 10-20% ), Causing a waste of light.

Third, then consider resisting the bright days of the long rainy days

At present, most Solar street lights can only be continuous rainy days.3-7 Heaven, and this is far from meeting the requirements of climate change from all over the world, because the number of continuous rainy days in most areas exceeds more than 3-7 Oh my god, and our Solar street lights can achieve the same configuration of conventional technology 3-5 Pack, Gundam 35 The day continues to light up.Why is this?The patented Solar street light controller invented by our company can make our company's solar energy led The street lights are energy -saving 70-85% In other words, our company's Solar street lights 1 Power consumption at night is only configured with conventional solar energy in the same configuration led Street 20% ( 1-80%= 20% ),Right now 1/5 In other words, you can do it through conventional technology 6 In the rainy weather, we can be close 30 Sky's continuous rainy days.Maybe many people ask me how I did it?The principle is as follows:

A : Solar street lights led The light source uses digital driver technology than conventional technology. 20%

Most of the light sources used in Solar street lights are usedled ,and led lighting is a need for one led Drive the horizontal flow source, the conventional constant current source needs to consume the entire lamp power 20% Bost left and right, and our company uses led Digital constant stream driving patented technology, the power of this digital constant stream source is only 0.0625 ( IC . W It can almost be ignored, so that our street lights consume power consumption. 20% Essence

B The led Driven by digital constant streaming, intermittent power supply and power saving 50%

Fans of conventional technologyled When the street lamp is working, the power bead must be continuously powered to the lamp beads, and our companys led Digital constant stream, use intermittent switch to power supply to led light source. led That is, the light diode is a semiconductor device. The characteristics of the semiconductor is the switching characteristics. It is different from ordinary light sources. The number of switches is too large, which is easy to burn and damage.Switch frequency 10K-100KHz With half of the time in the unit time, use half of the electricity without electricity, so that the Solar street lights of our company will save energy and energy saving energy. 50% After testing, actual energy saving 47.3% above.And the lamps are lower than the conventional constant current technology 30-40% EssenceAt a very short switching time, the human eye and analog illumination meter are inductive.

C The led Energy -saving mode of gradient energy saving mode in the middle of the night of light source 15% above

In the middle of the night, the pedestrian vehicles on the road will be greatly reduced, so a energy -saving mode can be set up in the middle of the night.led The power of the light source slowly reduces the power you want, and then maintains it to dawn, and other companies suddenly drop to a target value, which is not good for pedestrian vehicles. Generally, our design is the energy saving in the middle of the night. 15% There are enough brightness.

[Wall lamp] The characteristics of the Wall lamp are the purchase strategy of the Wall lamp

1. Features of wall lamps

wall lamps are suitable for bedrooms and bathroom lighting.Commonly used two -headed magnolia wall lamps, double -headed olive wall lamps, double -headed drum -shaped wall lamps, double -headed cup wall lamps, jade pillar wall lamps, mirror front wall lamps, etc.The installation height of the Wall lamp should be not less than 1.8 meters from the ground.

2. Purchase strategy of wall lamps

The wall selection lamp mainly depends on the structure and shape. Generally, the mechanical molding is cheaper and the manual is more expensive.iron forging wall lamps, all -copper Wall lights, sheepskin Wall lights, etc. are all mid -to -high -end wall lamps, of which iron forging Wall lights are the best.In addition, there is a digital perpetual calendar wall Hanging light with lamps and paintings. This wall -mounted lamp has a lighting and decorative effect, and can be used as a calendar. It is very popular with consumers.

1. How big is the power of the probe lamp?

At the beginning of the detection lamp, it was a special lamps for military use. It was used for long -distance lighting and searching for enemies, and assisting the night war. With the development of electronic surveillance equipment technology, the military use of the detection Lights has gradually decreased.How much watt is the probe light?

There are many types of probe lamps, and different types of detection Lights have certain differences. For example, home -based exploration Lights are relatively small, generally about one or two hundred watts;, 500W, 1000W; The power of the pyrine detection Lights developed and designed for the field of Outdoor security monitoring is usually 1000W; there are some special use of high-power detection Lights, which are about 2kW-5KW.

The greater the power of the probe light, the greater the brightness of it, the farther the range, and the more expensive the price. When choosing, you can choose the appropriate power of the detection light according to actual needs.

2. Introduction to the main parameters of high -power search Lights

Ultra -power detection Lights are professional Outdoor special lighting equipment. Usually use high -pressure short arc lighting sources, which are large. They are widely used in prisons, docks, hydrological stations, oil fields, airfields, large construction venues, industrial and mining enterprises, field search and rescue, etc.Place, the following introduces the parameters of high -power exploration Lights:

Rated power: 1000W

Rated voltage: AC220V AC50-60Hz

bulb: High -pressure short arc lamp 1000W

Life of the bulb: 1000 hours (after 800 hours of light failure starts)

color temperature: 6000K

Light flux: 32000LM

Valid range: 850m-1100M

Rotating angle: level 0-355 , vertical positive and negative 60 degrees

Rotating speed: level 9 degrees per second, vertical 1 degree per second

Rotating limit: external limit column

Available heat dissipation method: forced wind and cold

Protection level: IP54

Weight: 10kg

Dimensions: 380mm*250mm*580mm