1. Is the Camping light waterproof?

Camping lights have a certain waterproof ability.

Because at the time of Camping, some camp environment is very humid, and the next day it is like a rain that was rained for a night, so the Camping light requires a certain waterproof ability;The Lights are generally Hanging under the sky curtain or inside the Tent. Only a small amount of water will be dipped. The waterproof performance is too strong and it will not play a sufficient effect.

2. Can the Camping light be drizzled with rain?

The waterproof performance of Camping lights is very important. After all, it is used in the wild environment. It may suddenly rain at night. Therefore, the Camping light needs to have a certain waterproof ability. So what is the waterproof performance of Camping lights?Can it rain?

Therefore, under normal circumstances, the Camping light cannot be used directly in the rain. There is no big problem with a small amount of rain. If it is used in the rain, it is likely to damage.

3. Wild Camping lights and waterproof levelgenerallyHow much

When going out to Camping, sometimes the environment is very humid, and even when it is raining. At this time, the waterproof performance of Camping lights is particularly important.The waterproof performance of Camping lights is generally divided by waterproof level.

The waterproof performance of the lamps is usually measured by the IPX waterproof level standard. From IPX-0 to IPX-8 to nine Levels. IPX-0 level means no waterproof protection. IPX-8 Levels can guarantee that the water surface is immersed in the water surface of 1.5 ~ 30 meters.For 30 minutes, the performance is not affected and does not leak.Camping lights are outdoor lamps. Generally, IPX-4 Levels are sufficient. It can eliminate the harmful effects of splashing droplets from different directions. It is the basis for using outside accounts and is enough to cope with Outdoor humid environment.Level can reach IPX-5 level.

1. How much watt is fit for Outdoor Tent lamps

Camping lights are also called Tent lamps. There are various types of steam lamps, fuel lamps, and electric Lights. Now more are used for electric Lights. LED light bulbs are used. So how much watt is it better to buy Camping lights?

The Camping lights are different from the Lights used in daily home furnishings. The Camping light does not require too much lighting and range, and the power is better and the battery life is longer. ThereforeAbout a dozen watts to about thirty or forty watts, there are also some high -power Outdoor Tent lamps. At about seven or eighty watts, the main thing to buy depends on the actual needs.

2. How many lumens are needed for Tent lamps

The brightness of the Outdoor open camp Lights not only depends on the Watshu, but also depends on the lumens. The output of the light is measured by lingering. The higher the lumens, the brighter the light. So how much is the Camping light?

The general Camping lights are about 100-240 lumens, and there are also some high-lumen or low Camping lights. When choosing, it is mainly based on the appropriate Camping light according to the number of people:

1, 100 lumen Camping lights are suitable for use in tents.

2. The 200 lumens Camping lights can be used for camp lighting, such as multi -person dinner.

3. During the opening of the camp, because there are more people, 300 lumens or even higher Camping lights usually need to be required.

Of course, it is important to note that the larger the lumens of the Camping lamp, the brighter the Camping light, which also means that it will consume more electricity. Therefore, it is recommended that you choose according to your needs and try to choose Outdoor tents that can provide multiple brightness mode adjustment functions.lamp.

3. Buy Camping lights to buy a few suitable

When buying Camping lights, pay attention to the number of Camping lights. Generally, according to the number of campers:

1. If it is a single Camping, basically just put a Camping light in the Tent and outside.

2. If there are many people, the range of tents is larger, and the number of Tent lamps needed. If 2 to 3 people, you can put one in the Tent, the living room account, and the inner account.

If you or more or more or use the tunnel account, you can use 2 main Lights and 2 auxiliary Lights, or use the light bar.

1. What is a ground lamp

The land buried lamps are widely used in the field of technology lighting in my country. Because it is buried on the ground for people's lighting, it is named for land buried lamps. Voltage: 12V-220V, power: 1-36W, protection level: IP6.5, control method: Internal control, external control, DMX512 control can be available; there are two types: ordinary light sources and LED light sources in light sources. The high -power LED light source and small power LED light source are generally monochrome. , LED light sources have seven colors, and the colors are more colorful.Land buried lamps are widely used in squares, restaurants, private villas, gardens, conference rooms, exhibition halls, community environment beautification, stage bars, shopping malls, parking sculptures, tourist attractions and other places.

2. How to install the LED floor lamp

1, Preparation before installation

1) Prepare parts and need tools.

2) The power must be cut off before installation.

3) First dig the embedded hole according to the outer diameter size of the embedded parts, and then fix it with concrete.

4)The main line diameter must be greater than the line diameter of the lamp.

2, installation process

1) After the embedded parts are fixed, connect the input wire of the buried lamp with the external wires, and the phase lines, zero lines, and ground wires are connected and waterproof.

2) Use screws to fix the lamp component with the embedded parts.

3) Use the screw to fix the noodles on the lamp component.

4) After determining that the above operation is correct, connect the power.

3. installation of buried lamps

1. Before the LED buried Lights are installed, the power must be cut off.This is the first step in the installation of all electrical equipment and the basis for safety operations.

2. Before the LED buried lamp installation, various parts of the lamps should be sorted out.The LED buried lamp is a special landscape LED lamps buried in the ground. Once it is installed, it is troublesome to reinstall it.So you should be ready before installation.

3. Before the LED buried Lights are installed, the shape of the embedded parts should be connected to the size of the embedded parts, and then the embedded parts are fixed with concrete.The embedded parts played the role of the main body and the soil of the LED ground lamp, which can ensure the service life of the LED ground buried lamp.

4. Before the LED buried Lights are installed, a wiring device with an IP67 or IP68 should be used to connect the external power input and the power cord connection of the lamp.In addition, the power cord of LED buried Lights is required to use VDE -certified waterproof power lines to ensure the service life of LED ground buried lamps.

1. What is the reason why road Lights flash and flash

When you walk on the road at night, sometimes you find that the street lights on the road flash and flash. Usually, human eyes can perceive the light of 70 Hz. If it is lower than 70Hz, the human eye will feel flickering.It will stimulate the eyes, and it will also affect the lighting effect. This is generally LED street lights. The reason why LED street lights flash may be the following:

1. Drive power problem

The driver of LED street lights generally uses a constant current power supply. The basic working mode of the constant current power supply is to continuously adjust the output voltage to ensure that the current is constant when the internal resistance change of LED lamp beads, but this adjustment has a certain limit. There is a certain limit.The Hengli power supply has a range of output voltage. Once the breakthroughs are made, the power supply will enter the protection state. The expression form is that the lamp starts to flash.

2. LED lamp bead problem

LED lamp beads and LED drivers are not matched with flashing phenomena. Normal single-footed 1W lamp beads bear the current of 80-300mA and a voltage of 3.0-3.4V.In the phenomenon, the current is too high, and the lamp beads cannot bear it.

3. The lamp is broken

The phenomenon of frequent lighting in outdoor lamps may be that the lamp is not done well, which causes the water to water. The damage to the damage of the lamp and the driving power supply will cause the flash and need to be repaired in time.

2. LED street light flashing failure solution

The LED street lights have been flickering. The maintenance personnel must first check whether the problem where the problem is driven or LED lamp beads. You can check the faulty parts by replacing the drive power and lamp beads separately.Essence

Sometimes there will still be a flickering failure after the street light is turned off. This must be considered whether it is the problem of the line. It may be a problem with the zero line controlled by the switch. This needs to be dealt with in time to avoid accidents.If you find a problem, it is likely that the LED street light itself generates a self -sensing current. The connection of the coil and the electric lamp with relays can solve the problem with relay.

Third, the street lights are broken to what department to respond to

What should I do if I see the street lights broken?When the street lights are flashing or not bright, ordinary citizens should feedback the situation to the relevant departments, so what part of them should be reflected?This should be determined based on the nature of the street light:

The street light management in my country is divided into two types. One is the social street lights that occupy most of the ratio. This street light is broken. It should be reported to the municipal department or the city's power bureau street light management office where the city's power bureau is located.If it is a street lamp purchased and installed by communities, communities, and villages, it is usually applied for maintenance to the property and village committee.There is also a landscape landscape of the scenic area or Park. If this street light is broken, you can go to the tourist center of the Park or scenic spot to reflect the problem.