Teng art Lantern Pictures

Rattan art lamps, okay?

Tengyi lamps bring us light and beauty.The symbol of youthful vitality, the manifestation of artistic life, the vine art lamp with the freshness of nature and the strong rural atmosphere, is loved by many consumers who love nature.The aimed at the purpose of environmental protection design, advocating a simple and natural life, combining comfort and environmental protection.The vine art lamp is made of wild rattan as the material, boldly expressed the desire to be close to nature.However, the dust of rattan Lights is difficult to clean, and it will be old and dim for a long time.

Teng art Lantern Pictures

I believe that everyone has seen a lot of people, and now many fashion people have also consciously or unconsciously began to decorate their living space with many elements of nature.art lamps immediately have a lot of natural consumers who love nature.

Teng art Lantern Pictures

The aimed at the purpose of environmental protection design, advocating a simple and natural life, combining comfort and environmental protection.The rattan lamp is made of wild rattan, and boldly expresses the desire to be close to nature, so that people with rattan lamps can temporarily escape the hustle and bustle of the city life, and they can also split a static soil at home, and nature and natureIntimate contact.The owner of the rattan lanterns can create a simple and natural style created by the rattan lamp, recalling the relaxed and leisurely life clips in the past, and naturally indulge in the rattan scenery, rattan, vine, and rattan.Many foreign merchants have a soft spot for rattan Lights. Perhaps because foreigners are born with excessive romantic cells. It is said that the more rustic products, the more they are loved by foreign merchants.

Teng art Lantern Pictures

Put one or two sofas and seats edited by vine willow in the room, and put a rattan lamp on the bedside, which can add a lot of interest in the room.Decocts made of bamboo, paper, paper, etc., are equipped with sophisticated grass blankets in these exquisite vines and grass products. I believe that the rural style in the living room will definitely come.

Wall lamp daily cleaning method

1. The Wall lamp is easy to accumulate dust, and regular dust removal can be maintained to maintain good lighting effect.You can wipe it with a wet cloth, keep the action in the same direction, do not rub it back and forth, and the strength should be moderate.Turn off the Lights inside the cleaning light and remove the bulb.

2. Inside the Wall lights, when cleaning the bulb, first turn off the Lights, and you can remove the Light bulb and wipe it separately when wiping.If you clean it directly on the lamp, do not rotate the Light bulb in clockwise to avoid tightly peeling the lamp head.

How to clean different material wall lamps

1. Cloth lampshade

Wash the fabric lampshade with a soft brush, you can remove the fabric lampshade, and stick to the cleaning agent with a lower concentration on the soft brush, and then scrub the dust on the fabric lampshade. This method is not only simple, but also the wall lampshade.No damage.

2. fruits glass lampshade

Use a soft cloth suitable for cleaning the glass, be careful of the lampshade of the wall, or scrub it with a soft cloth dipped with a toothpaste. You can use a soft cloth to wrap chopsticks or toothpicks.

3. Resin lampshade

It can be cleaned with chemical fibrous tweezers or dedicated tweezers. After cleaning, anti -static spray should be sprayed, because the Wall lights of the resin material are prone to static electricity.

4. Fold lampshade

The fold lampshade Wall lamp can be scrubbed with a cotton swab dipped in water. If it is particularly dirty, a neutral cleaner can be used.

5. crystal beaded lampshade

crystal beaded wall lamps are delicate and exquisite, and clean is very troublesome.If the lampshade is made of crystal beads and metals, it can be cleaned directly with neutral detergent.After cleaning, dry the surface of the surface and let it dry naturally.

Wall lamp maintenance method

1. The wall installed on the wall is to pay attention to whether there is a water seepage to avoid the Wall lights from falling off.Do not frequently switch when used to avoid affecting the service life of the Wall lamp.

2. Frequent switching wall lamps will greatly reduce its service life, so try to reduce the switch of the lamp when using wall lamps.

1. The advantages of the LED Solar Lamp Tube

ledThe fluorescent lamp Tube is the same as the traditional fluorescent lamp Tube in appearance, and the length is available.60cmand120cmAs well as150cmThree types, their power is respectively8WAs well as9WAs well as10WAs well as12WAs well as15WAs well as16Wand20W,and60cmThe actual power consumption of traditional fluorescent lamps is26W,,120cmThe actual power consumption of traditional fluorescent lamps is45WItemsledThe fluorescent lamp Tube only has traditional lamps40%It is an efficient and energy -saving lighting product.

advantage:

1. Environmental protection lamps to protect the earth

The traditional fluorescent lamp contains a large amount of mercury steam, and if it is crushed, it will volatilize into the atmosphere.However, the LED sunlight does not use mercury at all, and the LED products do not contain lead, which plays a role in protecting the environment.

2. Efficient conversion to reduce fever

Traditional lamps produce a large amount of thermal energy, while LED lamps are converted into light energy, which will not cause energy waste.And it will not produce the phenomenon of degradation for files.(This sentence requires professionals to adjust. LeD will also produce heat, and heat will cause LED light decay, so it is necessary to strengthen the heat dissipation function of LED lamps)

3. Quiet and comfortable, no noise

The LED lamps do not produce noise. It is the best choice for the use of precision electronic instruments.Suitable for library, office and other occasions.

4. The light is soft and protects the eyes

The traditional fluorescent lamp uses 220V AC power, so it will generate 100-120 times per second.The LED lamps directly convert the AC power to DC power, which will not produce flashing and protect the eyes.

5. No ultraviolet rays, no mosquitoes

LED lamps do not produce ultraviolet rays, so compared with traditional lamps, there are fewer mosquitoes around the lamp.The room will become cleaner and neat.

6. Voltage range: 80V -245V

The traditional fluorescent lamp is lit by the high voltage released by the rectifier, and it cannot be lit when the voltage is reduced.The LED lamps can be lit within a certain range of voltage, and the light brightness can be adjusted.

7. Save energy and live longer life

The power consumption of the LED fluorescent lamp is less than one -third of the traditional fluorescent lamp, and the life span is also 10 times that of the traditional fluorescent lamp. It can be used for a long time without replacement, reducing labor costs.It is more suitable for difficulty in replacement.

8. Strong and reliable, long -term use

The LED lamp itself uses epoxy resin instead of traditional glass, which is stronger and more reliable. Even if LED is smashed on the floor, it will not be easily damaged and can be used with confidence.

9. Simple installation

During the installation, remove the original fluorescent lamp to the LED fluorescent lamp, and remove the ballast and the ripplane.

two,LED fluorescent lamp energy saving effect

15WLEDThe brightness of the sunlight is more than the traditional40WThe sunlight is still bright,18W LEDThe fluorescent lamp is more than traditional64WThe sunlight is still bright,ledThe brightness of the sunlight is particularly softer and easier to accept.Life life5Ten thousand-8The power supply voltage of 10,000 hours isAC85V-260V (comminicateCureThere is no need to start with a gifted device, start fast, small power, no flickering, and not easy to see fatigue.It is not only super strong and energy -saving.It is one of the products developed by the National Green engineering and is the main product to replace the traditional fluorescent lamp.Low power consumption, saving60-80%Electricity is better than traditional fluorescent Tube.

three,ledfluorescent lampScope

It is suitable for most indoor lighting applications, such as family, hotels, shopping malls, office spaces, schools, parking lots, warehouses, factories, supermarkets, channels, corridors, advertising boxes and other indoor lighting.

Four, LEDLight lamp wiring diagram

1. There are two types of wiring methods for traditional fluorescent lamps: electronic zone, inductive town flow.The wiring diagram is as follows:

2. LED fluorescent lamp Tube wiring method: Remove the tingler and (or) gobinial device, and connect the fire line and the zero line to both ends of the bracket, as shown below:

installation instructions:

1. Remove the Qihui and rectifier, and connect the city's fire lines and zero lines on the left and right ends of the bracket respectively.

2. The LED lamp Tube is a built -in power supply, the G13 interface has a short -circuit state, and the interfaces of both end are consistent.

1. Common faults and maintenance of Solar street lights

With the gradual adjustment of my country's energy structure, Solar resources are widely used. Solar street lights are street lights using Solar lighting. During use, there may be some faults. The following is a common failure and maintenance method for Solar street lights:

1. The whole light is not bright

Solar street lights are Outdoor lighting. They often encounter high temperature or rainy conditions, low temperature or rainy weather, etc. The controller of Solar street lights is usually insidePhenomenon.First check whether the wiring site of the controller has water traces or rust. If so, it is likely that the controller has been damaged. If there is no battery voltage measurement, such as 12V Solar street light power supply system, the battery voltage is lower than 10.8V, the battery has been storage.No electricity, you need to replace it.Check if there is voltage and current output under normal working conditions.If there is no, the batteries are damaged and replace the batteries.There is no problem in the above, you should check the light source. Only the light source is connected to the power supply. See if it Lights up, the light source is replaced without light.

2. The lamp head flickered

The cause of this failure is poor, the battery is lost in power, the battery is lost, and the amount of power storage has been severely reduced. If the line is fine, the battery is replaced.

3. Short lighting time

Generally, it is caused by rainy days without the sun. If the rainy day durates short, it is usually caused by the decline in battery storage power and insufficient power storage capacity.

4. The source of Solar street lights is not bright

Many Solar street lights use dot matrix LED light sources. Except for the quality problem of LED light sources, some lamp beads will cause this situation.The solution is to replace the corresponding lamp beads, welded firmly or replaced the entire street lamp head.

Second, the Solar street light is broken

Solar street lights are working outdoors. Even if the quality is good, it will inevitably fail. So who should I find if it is found that the Solar street light is broken?

Generally speaking, the Solar street lights are broken, depending on where the Solar street lights are installed:

1. If the Solar street lights on the municipal road are broken, you can contact the local municipal street light management department to let the street light management department go to repair.Essence

2. If the Solar street lights in the community are broken, you can contact the property department to let the property be repaired.

3. If the Solar street lights of the scenic area or Park are broken, they can generally report to the staff center or Park management office to report to the staff, and they will send people to repair it.

4. If the Solar street lights in rural areas are broken, as long as you buy Solar street lights produced by regular manufacturers, contact the manufacturer. The manufacturer will send professionals to contact the person in charge of the village.If the user cannot solve it, they will send professional and technical personnel to help solve the situation where the street lights are not turned on.

1. How much is the probation light?

Detective lamps, also known as Outdoor probe lamps, are commonly used outdoor lamps. They are widely used in Outdoor landscape lighting and Outdoor safety prevention areas. Many donkeys will buy a probe lamp to help Outdoor photos. So what is the price of the probe lamp?

Generally speaking, the price of the probe Lights is mainly affected by factors such as lamp sources, power, accessories, brands, performance, irradiation distance, etc. Because of the quality gap, the price is also high and low, the ordinary ones are about 50-100 yuan, and it is more expensive.It takes 300-500 yuan. These are home-based scratch. If it is a large probe lamp on the truck, the price is much more expensive, usually thousands of yuan.

2. How to buy Outdoor visit Lights

When traveling in the wild, donkeys will use Outdoor probe Lights. When buying Outdoor visit Lights, the main factors that need to be considered are the following points:

1. Brightness

The higher the brightness is generally better, but the brightness is too high, which will also affect the life of the light source, and the heat is large and the battery life is poor. Therefore, the brightness of the ordinary Outdoor visits is generally not particularly large.Objects have better lighting function.

2. color temperature

The color temperature of about 4300K slightly yellow is more suitable for human eyes. The color temperature (that is, Blu -ray) of more than 5600 people will lose the layer and cannot see the details.

3. Light source

The size of the light source of the probe light is related to the hardness of the light. The larger the light source, the softer the light, the more likely to perceive the three -dimensional objects and detect the obstacles, but the corresponding irradiation distance is also shortened.When buying, you can choose according to your use. The long -range lighting source sources are smaller, and the sources of pedestrian Lights and camp Lights are larger.

4. Light distribution

Seeing whether the light and darkness is different in the lighting area, whether there are concentrated spots. Outdoor lighting generally requires a bright light spot in the center of the light area to illuminate the target, and there is a certain range of scattered scattered around to see the road or environment.

5. Protectiveness

Outdoor visit lamps are used outdoors after all, so they require certain protection performance. Usually IP Levels are expressed that general use can reach IP43 protection, mainly to prevent light rain and occasionally falling into the water; if it is under high intensity and bad weather, it is recommendedSelect the IP67 Protection Detective Light.

6. Endurance

The endurance capacity of Outdoor probe lamps is high or low. It is recommended to choose a viewing light for the high beam to reach more than six hours (including the backup power supply), which requires the replacement of the power supply.