The advantages of wall -mounted Flower pots

It does not take up space, even if plants are crazy, they are not afraid of growing up. Plants that are high and low have highlighted the level of space, and even become a highlight of breaking the monotonous space.Even if there is no room for Outdoor, but with it, you can always feel the forest and green atmosphere at home.Every day is a good mood.

Teach you homemade suspension Flower pot

Material:2 Square meters of red pottery pots, 1 bundle of cotton drying rope, 1 bouquet of green cotton soft louvers, 1 copper spring buckle, 8 to 16 wooden beads.

step

1. First cut the three 16 -foot -length drying rope and a 16 -foot green line in length.Next, half of all four lengths are folded; the point of the line is tightened through spring buckle, cycle, and tightening.Make sure that there are ropes on each side.

2. Take out the red pottery pot, and the ropes on both sides pass through the holes under the Flower pot.

3. Turn the Flower pot over and organize the rope to ensure that there are two ropes on each side of the Flower pot.Repeat the above steps to connect the second Flower pot.

4. String wooden beads under the rope and knot.Put your favorite plants in the Flower pot and hang on the window sill.The beautiful garden is ready.

Teach you homemade suspension Flower pot two

1As well asTo prepare the Flower pot materials you need, if you put the soil of flowers directly, you must choose some waterproof materials, such as iron or plastic.

2As well asThe Flower pots Hanging on the wall are relatively simple when making. The key is to find the position of the Hanging. Keep it on the symmetrical line. Puning is also more particular.Then make a groove along the air so that you can be fixed inside.

3As well asIt can also be made with some waste sprinkler, and the effect is also very good.There are many shapes of wall -mounted Flower pots, which can be used on corridors, balconies, living rooms, etc. to be decorated.

1. How to make Camping lights

Camping lights are a kind of lamp that provides a large range of lighting for camps. It belongs to outdoor lamps. In addition to purchasing ready -made Camping lights, we can also DIY to make Camping lights by ourselves.The step of making the Camping lights is as follows:

1. Prepare raw materials: two candy boxes, a plastic water cup, a lithium battery charging module, a LED lamp bead drive board, one DC mother, two LED lamp beads, two heat sinks, two sections 18650 lithium batteries, two two sections, two sections, twoA needle for the knitted sweater is a few small screws.

2. Put a punching of the candy box, use a 16mm switch, so hit the holes of 16mm. The DC parent headhole opposite the switch is 10mm.

3. Then punch, hit a large round hole in the middle as a bead hole, and a few small round holes on the side as a sweater acupuncture and screw hole.

4. Fix the lamp beads and heat sinks together, and then assemble it with the lid and cup of the candy box.

5. Connect the circuit, test whether it can be turned on normally, a homemade Camping light is made.

2. What are the requirements for homemade Camping lights

Camping lamps are lamps designed to adapt to complex field environments. It is different from ordinary lamps. Whether it is the Outdoor Camping lamp bought or homemade wild Camping lights, the following requirements should be met:

1. The light source is stable.

2. Easy to carry.

3. Can provide high -color light sources.

4. Have a certain waterproof ability.

5. Appropriate lighting.

3. Can ordinary table lamps be used as Camping lights?

It is generally not recommended.

The reason why special Camping lamps appear, of course, because ordinary table lamps and other lamps cannot meet the demand for outdoor lamps. If the lighting of the Camping light is replaced by table lamps, although the brightness of the light can meet the demand, the battery life and waterproof ability are not good. Maybe it may beIt won't be damaged for a long time.

How to make a Baby sleeping bag

Method one

1. Prepare the tools and materials, including fabrics, zippers, needles, quilts, one quilt, buttons, two capsules suitable for infants.

2. Fold the thin quilt and cover the whole body of the baby.

3. Add the long zipper of the upper clothes to the two sides of the quilt, and then add the shoulders on the two shoulders, and fix it with buttons and quilts.

4. Connect the pillow to prevent the baby from losing the pillow when he sleeps. Such a simple Baby sleeping bag is ready.

Method two

1. Prepare a cotton vest. It can also be new. It is also okay for your own old clothes to transform, but you need to choose a loose vest. It is best not to be too big.

2. Prepare a flat loose band, narrow, not too hard.

3. Put the baby's wrist with thickness and thinness into the rubber band by pressing the sleeves of the vest. It should be slightly wider, because the clothes wrinkled will make the cuffs smaller.

4, the same is true to put on the collar, but do not wear the whole circle, because the clothes wrinkles are uncomfortable behind the baby's neck, so stay behind the neck, probably start from the shoulders for half a circle.

5. According to personal needs, the bottom edge can be installed or not. If the baby is big, it will be done from below, and the Baby sleeping bag will be ready.

What should I pay attention to when making a Baby sleeping bag

1. In the process of making baby sleeping bags, you should often observe whether it is appropriate, adjust it in time according to the specific situation of the baby, do not be troublesome, and the thickness of the sleeping bag with quilts, towels, blankets, etc.Don't be careless.

2. Adjust the production materials according to the weather, and modify the design plan according to the baby's habit. Generally, three Sleeping bags can be used for many years. With the baby grow up quickly, the weather and the temperature in the house are ever -changing.Don't worry about it, just replace the tied single towel.

3. It will be better to make an additional sleeping bag. The extended sleeping bag can make appropriate adjustments according to the baby's head, which is more comfortable.

4. The production materials of baby sleeping bags include down, silk, cotton, chemical fiber cotton, etc. Among them, cotton has a good hygroscopic absorption, which can be used in the four seasons throughout the year, and it is also suitable for the growth and development of infants and young children.

Disclaimer: The above method stems from the index of the program system or the sharing of netizens. It is for your reference only and does not represent the research perspective of this website. It proves that it is valid. Please pay attention to the authenticity and authority of the source of the content of the content.Apply to delete & gt; & gt; error correction & gt; & gt;

What plants are there in indoor plant walls

1 , Dragon

Schilan is a proper vertical -Hanging leaf -viewing plant, and it is also one of the plants commonly used in indoor plant walls.Root meat, slender leaves, like orchids.The stolch stems born in the leaf axillary can be long and soft, both rigid and soft; the clustered leaves at the top of the stem are drooping from the edge of the basin to the outside, floating with the wind, and it looks like a crane with wings beating.Therefore, it is known as the ancient crane orchid.The main thing is that it can absorb fine particles such as dust in the air and change the air to the moist environment. It is a good helper for home purifying the air. When making indoor plant walls, it is usually used as a suspended plant landscape.

2 , Red Gold Diamond Version Green Velvet

Red Gold Diamond Green Velvet is one of the commonly used plants in indoor plant walls.Red gold diamond vine green velvet a kind of yin -born plant, its vitality is extremely strongThis is one of the guidelines for planting of indoor plant walls.It also has the function of purifying the air, and it is compared with suitable homes, office buildings, hotels, hotels and other occasions.Staying in the room, it can make the entire room generous and elegant, rich in tropical rain forest atmosphere.Its blades are wide, hand -shaped, lustering petioles, and long and thick and strong. Its leaves are thick and green, which is an excellent appreciation plant.Therefore, all the requirements of indoor plant walls can be perfectly matched with red gold diamond vines and green velvet.

3 , Luo Luo

Green Luo is a large evergreen vine plant. It is good at tropical regions to switch to rocks and trunks that grow up in rainforests.Its surrounding and prosperous gas can not only be climbed on the cylinders made of brown, placed in the foyers and hotels.flowers.In addition, it can also be cultivated in the water as a small decoration in the room.

4 , Ye Yingchun

Wild Yingchun is an evergreen shrub.It is originally produced in Yunnan and the southern garden is quite common. It is often compiled into various shapes of greenhouse potted plants in the north.

5 , Hanging bamboo plum

Hanging bamboo plums, soft stems are soft and crispy, and Portuguese ground grows vines.Because its leaves are like bamboo and leaves, they are often suspended in the potted plants and appreciate their scattered stems and leaves.

6 , Butterfly Flower

Butterfly flowers, honeyster deciduous or semi -common green shrubs.4 As well as 5 Blossoms in the moon, flowers are as large as a plate, and white as jade.board of umbrella flowers are born at the end of the branches, and the surrounding is infertile flowers developed by sepals, and the center is bisexual flower.

7 , Graphye chrysanthemum

Melon chrysanthemum Chinese is known as Chiba Lotus, with cold and cold, and it is not resistant to high temperature and frost.The whole plant is slightly hairy, the leaves are large as melon leaves, and the green light is bright; the top of the flower is raw, and the head -shaped inflorescence mostly converges into an umbrella house inflorescence.There are all colors, and there are red and white compound colors, flowers1-4 moon.

How long can the indoor plant wall live

indoor plant wall decoration can bring very good decorative effects, but plant walls need to be carefully maintained to ensure the survival rate of wall plants.Therefore, how long the indoor plant walls can live, it is mainly related to whether indoor plants will be maintained and planting.Generally speaking, the survival time of the indoor plant wall is between two or three months and half a year. If the life of the indoor plant wall survives longer, then you must pay attention to the planting knowledge of these indoor plant walls below:

1 Water

The key to plant breeding is moisture. If you want to have a longer service life of indoor plants, you must pay attention to maintaining sufficient moisture to ensure the frequency of daily watering and extend the survival rate of plants.

2 ,illumination

Although indoor plants are planted indoors, they also need good light to ensure the light of indoor plant wall plants, which is very helpful for the photosynthesis of plants.It is also very helpful for plant life.

3 ,ventilation

Choose a plant wall indoors, so you must pay attention to the good ventilation of the room, so as to ensure the most reasonable growth environment for plants, thereby extending the life of the plant wall.

How to make indoor plant walls

There are many processes on the construction of plant walls. building a plant wall is not an easy task. It is necessary to design it in conjunction with the actual environment and structure. Plant walls also need to be targeted at regional and environment in plant distribution., Water, light, and the liquidity of air, etc., scientifically and reasonably select the appropriate indoor green plant, so that it can be arranged through art arrangements to make the indoor"Icing on the cake" achieves a beautiful and comfortable effect, making the room full of vitality.

1 Simple indoor plant wall

You can buy small squares on the Internet yourself is the wooden board fixed on the wall. Of course, the shape can be placed by yourself, which can be placed according to your favorite shape.Then you can place it on it after fixing, so it looks very good.Of course, this method is very good and very simple. The material will be very cheap to buy the materials, but it is just a hand.When you choose, you can choose to make a plant wall.

2 , Framework indoor plant wall

Generally the skeleton The pattern of Flower pots.First cultivate the green plants you need with small Flower pots.Set up a supporting skeleton in front of the wall and set up a simple drip irrigation or spray irrigation system.Then place the small Flower pot in the built -in stent gap.The advantage of this indoor plant wall is that plants can be replaced at any time, and the choice of plants does not have much restriction.The disadvantage is that the construction of the stent outside the wall is more time -consuming and laborious.So everyone should pay attention to these points when choosing.

3 , Modular indoor plant wall

After cultivation, install it indoors.The advantage is that it is convenient to install and is more beautiful.However, its cultivation generally requires a special person to be responsible, and the cost is greater.Generally, families do not do such an indoor plant wall.More troubles, people are still busy now, so this is not suitable for home, suitable for large hotels and the like.So everyone should pay attention when choosing.

indoor plant wall care method

The indoor plant wall has a different set of standards from the Outdoor plant wall. The plants of the indoor plant wall have low light characteristics, and it is very easy to wither and need to be replaced regularly.At the same time, the problem of lighting and irrigation in an indoor plant wall must be considered. Therefore, the key to indoor plant walls is how to grow plants longer.Therefore, the method of indoor plant wall care method is brought below:

1 Irrigation method

The irrigation system is particularly important for indoor plant walls.The general plant walls are used in dripping irrigation, and the outlet is set on the top of the plant wall; ordinary soil cannot keep the water for a long time. ThereforeWater resources avoid waste.

2 , Growth medium

The growth medium is the growth medium of the plant wall. It has the characteristics of light weight, difficult to decompose, excellent storage capacity, strong drainage and gas exchange capacity.The growth medium of soil as the plant wall should first fully understand its habits, types, and plant root systems. These have played a decisive role in the survival of plants.