Articles in Tags material characteristics

What are the types of Outdoor Tent fabrics

At present, more fabrics are: Lig cloth, Oxford, nylon, washing cloth.

In general, nylon and washing are the most useful and better. Lig and Oxford are generally used for professional outdoor sports. It is suitable for professional tents such as alpine, plateau, and snow mountain environment.nylon and washing cloth are used to use the general casual inflatable Tent.Judgment criteria: The greater the density, the better, the higher the waterproof level, the better, the main standards are:

1. waterproof water is only coated with AC or PU.Generally only for children or game inflatable accounts.

2. Waterproofing 300mm is generally used in beach accounts/Shading accounts or cotton tents for drought and rain.

3. waterproof 800mm-1200mm is used for conventional simple categorian inflatable tents.

4. waterproof 1500mm-20000mm is used for comparing the mid-range inflatable tents and needs to travel for many days.

5. waterproof 3000mm is generally professional inflatable tents. It has been treated with technical treatment such as high temperature resistance/cold resistance.

The rainproof performance of the outer Tent cloth is still calculated based on how much mm of mm per Square centimeters.The general professional Tent rainproof index is above 1500mm, which can prevent heavy rain; and individual professional alpine accounts can reach 3000-4000mm, which can prevent continuous heavy rain.

Outstanding rainfallTentCloth, not only high rainfall indicators, but also inTentThere is also a wide rubber strip at the connection of the wiring seam to prevent the water from seeping from the line.

Although foreign accountsTentThe cloth anti -rainfall indicator is high, but breathable is a problem.Even if it is a sunny night, after a sense, it will still be covered with water droplets in the inside of the foreign account, especially to build an inflatable Tent on a large wet ground such as grassland.If you accumulate a lot, you will drop in the inner account.Relatively speaking, the internal area with low rainfall indicators is less water than rain prevention.

This is the water and gas exhaled in the inflatable Tent, and the steam on the ground isTentThe water droplets gathered on the inside of the cloth.Due to the rain and rain, the rainwater outside could not come in, and the water vapor inside could not get out.So when you get up in the morning, avoid touching the Tent hard, and be careful of the "light rain" inside.At the same time, if you are active in low -altitude areas, it is not suitable for buying professional tents. Not only is it wasteful, but also uses uncomfortable money, but it will feel sultry when sleeping at night.

canvas Tent purchase

As the saying goes, the price of one -point price and one point, the high -priced product natural craftsmanship will be better, but many merchants are priced at high prices, and each price is similar. You can't choose. Then you still need to look at the actual quality of the canvas Tent.Under normal circumstances, the greater the density of the latitude and longitude, the better the quality, the greater the toughness, the better the quality. The appearance should not be too rough. Generally, the Smooth quality and workmanship will be more fine.

How to judge the quality of the canvas Tent?We can touch it with our hands, softness, and the degree is not very grinding. If people put their hands on it, it will feel uncomfortable. Of course, it is not possible. We must buy what you like.In fact, the Tent cloth can be calculated with the number of millimeter water columns per Square centimeters. The more you can withstand, of course, the quality will be better.You can also use water to verify, of course, there is no need to talk about it.After practical verification, the most correct choice can be obtained.

In addition, good quality canvas tents can not only prevent water, but also shade. Only in this way can we meet people's daily needs. We can also take the canvas Tent to the underground of the sun for verification.In my eyes, of course, the effect of Shading and rain avoidance is not very good. Only when people stand under the canvas Tent and feel that the winter is warm in winter, so that it can be regarded as a canvas Tent that passes the quality.

canvas Tent price

Generally used, such as tents that are used in rainy or sunny days, are sufficient for about 3 or 400.But remember, do not buy some miscellaneous brands. After using the miscellaneous cards, you will lose waterproof performance because of the fabric coating.It is recommended to buy some brands. If you will climb Gaohan Snow Mountain in the future, you need to configure higher configurations. In short, a penny is a penny.

What should I do if the Outdoor canvas Tent is broken

After many use of the canvas Tent, there will be damaged places. Most of the damaged parts usually occur.These damage can be repaired with stitching. In addition, the rupture and damage of the barracks are usually replaced directly with new camp columns, so there is no special narrative here.The following is a brief introduction to the way of stitching glue treatment:

When doing wiring waterproof, first determine whether you need to do waterproof, because not every stitching needs to be treated with stitching glue. It is usually exposed to rainwater.Therefore, the stitching of rain cloth and ground cloth must be waterproof. As for the inner wall of the inner account, because it will not be directly exposed to rain, there is no need to be busy!

The second is to decide which side of the stitches should be treated, usually on the inside of the rain cloth and ground cloth. Correctly, it should be on the other side of the waterproof membrane, that is, the side of the waterproof membrane treatment can only be used to use only the side of the waterproof membrane processing can be used.Swipe glue.The easiest way is to drop some water on the cloth surface. If the shape of the water droplet is still kept, the waterproof membrane is covered on it. If the water will spread out, the side is your goal.

Next, you will start coating stitching glue. Prepare a clean and dry toothbrush to remove the old brushing hair, then apply the stitching glue to the stitching.Stitching stretching so that the stitching glue can penetrate into it, and then wait for another hour. After the stitching glue is completely dry, it will be completed!Finally, use sprinkler to sprinkle water to determine whether it will not leak water. If there is still water leakage, wait for the fabric to be completely dry before repeating the four steps before!

Disclaimer: The above method stems from the index of the program system or the sharing of netizens. It is for your reference only and does not represent the research perspective of this website. It proves that it is valid. Please pay attention to the authenticity and authority of the source of the content of the content.Apply to delete & gt; & gt; error correction & gt; & gt;

[Types of folding bed] What are the types of folding beds in the folding bed?

What are the types of folding beds

1. The type of common folding bed

According to different materials, the folding bed can be divided into the following types:

Wooden folding bed, steel wire folding bed, canvas folding bed, sponge pad folding bed, free assembly folding bed, electric folding bed

According to different uses, the folding bed can also be divided into the following types:

Outdoor military bed, office lunch bed, home folding bed, hotel bed

2. Types of lunch breaks in the office

If you do nt sleep at noon, it s really difficult to guarantee the effort in the afternoon. In the face of a variety of office lunch beds, and the price of lunch breaks in the lunch break.The lunch break in the office is made of different materials, but it is made of nylon cloth, polyester cloth and other synthetic wear -resistant cracking materials.Some of them are slightly better and they pay attention to the massage of the head.

The lunch bed in the office is generally folding beds. It can be divided into wooden folding beds, steel wire folding beds, multi -function folding beds, lying chair folding beds, etc.

General nylon cloth and polyester cloth -based office in the lunch break is about 100 yuan ~~ 200 yuan.The higher grade, better style and material, about 250 ~~ 500 yuan.The price of luxury can reach 800 or thousands of yuan.

Because the time of noon break is not long, the types of lunch breaks are not high. The price of lunch breaks in the office is generally acceptable. You can definitely find your own office lunch break.

What kind of material is good for folding bed?

1. bamboo folding bed

First of all, the specifications of the bed body should not be too large. The narrower the internal stress, the smaller the internal stress, and the more stable.Secondly, it is necessary to control the water content to about 8%, which will increase the stability of the bamboo board.Again, the bamboo board is not the older and better. The best bamboo materials should be 4-6 years. Too tender and too old will affect the stability of bamboo boards.

2. Wood folding bed

Wood is afraid of tide and insects, so living in high humidity areas, you should pay special attention to selecting wood with high oil -containing and better moisture, such as teak, beylum, South American rosewood, etc.Such as wood furniture with paint and moisture -proof protection.Note that the interface of heavy furniture components should be tightened or glued replenishment at the interface of heavy furniture components; touch the surface of the furniture by hand to see if they are Smooth; carefully check whether the surface of the bedboard is defiled.Not evenly, whether it has any cracks, etc.

3. Metal folding bed

First of all, on the coating, the chrome part of the coating should be bright and Smooth, and the light can be learned.The plating can not be foaming, rust, should not be exposed, and must not be scratched; there is no falling on the surface, no pimples, no wrinkles, no rust points, Smooth and delicate, and moist, Metal Tube parts should not have stack, cracks, welding, and pit.The riveted part should not be loosened, and the rivet garden head and the surroundings should be Smooth without smashed marks or burrs;

4. Oxford cloth folding bed

Oxford cloth with good quality should have the advantages of light texture, soft feel, good waterproofing, and good durability.The metal Tube part should not be stacked, cracks, welding, and pit.The riveted part should not be loosened, and the riveting garden head and the surroundings should be Smooth without smashing or burrs.

[sunscreen fabric ingredients] Which fabrics are good for sunscreen clothing, which are good for sunscreen clothes.

Which fabrics are good for sunscreen clothes?

sunscreen effect

The Sun protection effect depends on two aspects, one issunscreenThe density of the material is also the light transmittance of itself. The sunscreen with a large light transmission will not be better.

sunscreen test

In the chemical laboratory's sunscreen test of each cloth, the main test of 290-400 nanometer ultraviolet rays. The experimental results: the transmission rate of 310 nanometer ultraviolet rays is 19%of Tiansi, 12.4%of Niste Textiles, and cotton 9%, DuPont's rainfall fabric is 8.3%, and the metal silk cloth is 5.3%. The smaller the passing rate, the better the Sun protection effect, but the good white coat worn by the laboratory teachers, the UV -rays are only 1.9%.

General fabric of sunscreen

The first is color cotton fabric clothes, which are the largest isolation rates of blue, red, blue, and green.

The second is sunscreen fabric. This kind of production principle is very simple. In fact, the sunscreen auxiliary agent is added to the fabric.Some.

The third is special fabric clothes, such as silver reflective materials.

Which fabrics are good for sunscreen clothes?

sunscreen polyester fiber fabric

The sunscreen jacket is mainly made of polyester fiber material. The sunscreen auxiliary fabric is added to the fabric to increase the sunscreen surface to face the reflection and scattering effect of ultraviolet rays, and it can not allow ultraviolet rays to damage human Skin through fabrics.

sunscreen polyester fabric

In fact, polyester is the product name of polyester fiber fabrics in my country. The advantages of polyester are strong and durable, good, not easy to deform, corrosion resistance, insulation, stiffness, easy washing and dry.

1. What material is good for the kitchen?

Generally speaking, the metal of the Kitchen rack is better, and the plastic is not long, and it is not recommended.Metal sets are roughly divided into the following:

1. Copper chrome

The material and chrome -plating technology of the big brand are quite good, and the shape is also beautiful, but the price is also more expensive. Ordinary copper chrome -plated products must be asked if you can clearly ask whether the foot columns and the base are all copper.Chromium is better.The chrome layer of large brands is generally 6 or more layers. Instead of poor quality products, there are two or three floors.The 6 -layer -8 -layer chrome, the surface is clear, the light of pan -silver, is not easy to rust and peel off. The two -three -layer chrome -plated products can not be used for a year or two, and it is dull.The surface of the surface was peeled off.

2. Stainless steel

There are several materials in terms of 201, 301, 304, 315, 410.Among them, 304 stainless steel from 18-8, 18-10 is a medical -grade stainless steel with high -end stainless steel stands on the market.201 stainless steel is low -end, easy to rust, and is not recommended.

There are two types of appearance: one is ritty, and the other is mirror.The former is the quality of the steel, the metal material appears, and it is a high -end product. The latter has chrome -plated and polished components.

Buying stainless steel racks, like copper plants, must pay attention to all stainless steel, including foot columns and low seats.There are many low -cost products on the market. The main body is stainless steel, and the attachments are iron, which is easy to rust.

Lattia light surface SUS304 stainless steel shelf, whether it is a foot column, horizontal rod or a base, is the same as the faucet. Its color is particularly resistant and the texture is particularly strong.

3. Space aluminum

Space aluminum stand is very popular with users.It has the advantages of lightweight, stainless corrosion, not easy to leave watermarks, and cheap.The brand space aluminum products are beautiful, the surface is shiny, the workmanship is excellent, and the hardness is high.There are many inferior storage racks called "Space Aluminum", which is essentially ordinary aluminum products.The appearance is stupid, the production is inferior, and the hardness is not high.The brushed bright light is brushed and exquisite, bright and pleasant, without leaving water, no handprints, stainless corrosion.

2. How about the stainless steel shelf

1. Good waterproofness

The biggest advantage of stainless steel standing racks is that waterproofing is good. Because stainless steel is a highly waterproof metal material, even if it is placed in a humid environment for a long time, it is not easy to rust or is corroded.

2. It is not easy to breed bacteria

Compared with metal -made racks, stainless steel stands are not easy to breed bacteria and other bacteria such as mold in a humid environment, and have high hygiene.

3. There are many styles

There are many styles of stainless steel racks. According to different uses, they can be divided into tableware standing racks, tools of tools, vegetables and fruity racks.

4. Strong moisturizing ability

The anti -slimness resistance capacity of stainless steel shelves is much higher than the shelves of other materials. When the stainless steel shelf is stained with oil pollution, people only need to use a rag to dip the cleaner or directly wipe it with hot water, it can easily clean the oil pollution cleanEssence

[Outdoor folding bed] How to choose Outdoor folding beds to buy Outdoor barracks folding bed

How to choose Outdoor folding bed

The folding bed is easy to carry, bringing a Tent to solve the problem of sleeping, but people can also bring a folding bed, so that the smallest space can enjoy the most comfortable furniture experience.

You need to pay attention to the purchase of the folding bed:

Look at elasticity: Lie down in person and turn left and right a few times. A good spring will not be moved or uneven. And can immediately restore the original shape.

Look at the stability: You can shake the product back and forth, left and right, and shake the product, firmly explaining that the framework is good.

Note that the quality of the bag is: those who buy leather can hold one place with both fingers and pull it up. The feel is powerful.

Look at the process: If the folding bed of the steel frame structure, pay attention to the smoothness and gaps of the welding, and the coating looks uniform and soft.

If the paint process is used, the surface of the steel pipe is more likely to produce scratches and cause it easy to oxidize and rust.