How to clean Outdoor moisture -proof pads

1. Outdoor moisture -proof pads are dirty. You can use soapy water and soft brush to clean. When cleaning, first pour the soapy water on the stain, and then wash it with a brush.If necessary, you can immerse the moisture -proof pad into the water.After the stain brushing is cleaned, put the moisture -proof pad into the water and rinse.

2. The moisture -proof pads of chemical foam have a certain smell. Before cleaning, remove the plastic packaging film on the surface first, spread out the open air for 1 to 2 hours to remove the taste.

3. After cleaning the moisture -proof pads, put it in a cool and cool place to dry.If it is an inflatable moisture -proof pad, first charge a gas and dry it.After drying, wrap it with Oxford cloth and store properly.

How to maintain moisture -proof pads

1. Wrap the moisture -proof pad to reduce the wear during exercise and extend the service life.

2. In order to extend the service life, please do not fold, roll it up.

3. During the travel process, the moisture -proof pad is generally hung outside the Backpack.

4. Automatic inflatable moisture -proof pads should make it automatically inflatable. Do not use mouth to replenish qi. The water vapor in the mouth will affect the service life of the moisture -proof pad.

5. When using moisture -proof pads, the ground should be flat, remove the stones and branches on the ground, and then spread the moisture -proof pad to avoid damage to the moisture -proof pad.

6. Most of the materials for moisture -proof pads are flammable. Pay attention to fire prevention. Do not use stoves, smoke, etc. on it.

7. When using an inflatable moisture -proof pad, a sharp item should be avoided, otherwise it is prone to danger.If you accidentally break, you should replace the separated airbags in time.

8. Do not expose the moisture -proof pad to the sun to avoid degeneration damage to the moisture -proof pad plastic material.

Disclaimer: The above method stems from the index of the program system or the sharing of netizens. It is for your reference only and does not represent the research perspective of this website. It proves that it is valid. Please pay attention to the authenticity and authority of the source of the content of the content.Apply to delete & gt; & gt; error correction & gt; & gt;

1. Can waterproof sleeves be washed water?

The role of the Sleeve is mainly to protect the cuffs of the clothes from being stained with dirty things. Now many people wear Sleeve covers to sunscreen. No matter what cuffs are, as long as there is no holes, the Sleeve can be cleaned and then used before using it before using it.EssenceUse a period of time or dirty Sleeve to just wash it into the water. You can also put it in the washing machine and clean it with other clothes. Basically, it will not affect the effect of the Sleeve cover, but it is recommended to wash it well.

However, it should be noted that there is a kind of waterproof Sleeve sleeve used for washing clothes and dishes. The waterproof effect of this cuff is better because the surface is coated with waterproof materials. This cuff is cleaned.It is best not to rub too hard, otherwise you may scrub the coatings on the Sleeve surface, which will cause the waterproofness of the Sleeve to deteriorate.

2. What materials are applied to the waterproof Sleeve

There are many fabrics of Sleeve sleeves. Common ones are cotton, chiffon, leather, ice, polyester, spandex, etc. The commonly used fabrics used in waterproof sleeves:

1. PVC waterproof fabric

The sleeves made of PVC waterproof fabric are easy to wash and dry, do not afford the ball and do not fade, resistance and washing and washing, especially suitable for group use for daily household chores and activities.

2. Polyester with Waterproof material

There are also some factories used in the sleeves of the factory sometimes also have waterproof demand. Considering the cost problem, because the manufacturing cost of polyester material is low and very resistant and durable, it will also use polyester fabrics with waterproof materials for waterproof Sleeve cover.

The above is the material of the two common waterproof sleeves. As for the good problem of waterproof Sleeve sleeves, the main problem is mainly depending on demand and budget. Generally, the waterproof cuffs made of PVC waterproof noodles are better.

[swimwear and Swimsuit] Which is the best choice bikini, a conjoined Swimsuit or a split Swimsuit

What kind of Swimsuit

The one who fits the most is the best.Someone will always jump out and tell you what is the most fashionable, what kind of figure is the most sexy.However, sexy is not defined. The limitations of giving up the rules and regulations should be more valued by your own personality and adhere to your intuition. You can also emit unique sexy, related to self -confidence, and to be calm.Let's take a look at the characteristics and differences of various Swimsuits.

bikini-Sexy that has nothing to do with body

When it comes to the bikini, it seems that it will never be sexy.However, too many people have solved the meaning of sexy, as if it is only a hot body to be worthy of bikini.In fact, on the contrary, the beginning of bikini was inseparable from feminism. The norms that were liberated in women were imposed on women, and the Swimsuit began to have revolutionary changes.The sexy of bikini has nothing to do with body.bikini shows the vitality and health of nature's nature, and this natural beauty and vitality may be the reason why it is enduring and loved.

Conjusational Swimsuit-Classic is Wang Dao

Classics and fashion are originally a family. When the easiest conjoined swimming Swimsuit has attracted everyone's attention again, the conjoined Swimsuit in front of us has become more pure and natural.It can be a simple and unpredictable monochrome Swimsuit, as if returning to the 1990s.You can also add some fashion colors, make a small shoulder or oblique shoulder design, and add a metallic Belt. The simple conjoined Swimsuit immediately becomes dazzling like a small dress.

Skin Swimsuit-Continue to act as the protagonist

The split Swimsuit is probably the most popular style of women.The changeable style is suitable for the length of the split Swimsuit, and the skirts are available, and naturally, it can create a different confident image.Even if the floral pattern is vulgar, it is still lasting, which is probably related to the girl's complex in the hearts of women.The striped pattern is another extreme. Regardless of whether it is tall and thin, the striped shirt can always be revealed in a woman's wardrobe.The Swimsuit is obviously unavoidable, whether you are beautiful, simple and natural, anyway, the stripes will never be able to retire the stylish historical stage.

Three -piece set

The three -piece Swimsuit is a set of bikinis and a coat. It is more convenient to wear it. When wearing a bikini, when you go ashore, you can cover the fat and wear more women's beautiful figure.

The performance characteristics of the construction Tent

1. The construction Tent is a double -slope frame structure. The common specifications are 4*3, 4.5*4.6, 6*4.6, 7.5*4.8, 10*4.8.The Square pipe bracket is 25 and 30 spray paint, the thickness of the Tube is 1.2mm, and the Square Tube structure is relatively stable.(The side height is 1.8 meters, and the top height is 3 meters. It can support up and down).

2. The entire construction Tent uses military green canvas and Oxford cloth (warm winter and cool in summer). It uses felt felt in the middle and white cloth. The workmanship is based on the military Tent.The window has a gauze net with functions such as anti -mosquito, ventilation.The windows are equipped with organic glass plates. In summer, wind -proof lighting is used, and lighting is used in winter.Thermal insulation material is a fiber needle felt, which has better insulation and thermal insulation performance.

3. The construction Tent fabric cloth is made of grass green polyester cotton waterproof canvas. It is rainy, breathable, and aging.better.

4. The construction Tent structure is reasonable, safe and reliable, and can withstand 80mm thick snow and 8 -level wind load.

5. The construction Tent can be used in conjunction with the altitude heater or other heating stoves.

6. The construction Tent has the characteristics of waterproof, mold -proof function, and has the characteristics of light material, high tensile strength, high pH resistance, high temperature resistance, and convenient folding folding.The top of the Tent should avoid hitting the sharp metal appliance during use.If it is damaged during use, you can use the glue fluid to repairs the sticker.

Specifications and prices of construction tents

military construction tents ranging from 1000-3000 yuan, and different specifications have different prices.

1. Higher model 2*3 meters

This type of Tent pavement belongs to the mini type in the Tent. The shop can only stay in 2 people, and the price is about 1,100 yuan.

2. Higher model 3*4 meters

This small Tent can stay in 4 people. If it is up and down, it can live in 8 people. Among the soldiers of the soldiers, it is enough to accommodate a class of soldiers, and the price is about 1,400 yuan.

3. Higher model 3*5 meters

From small and medium -sized, the number of people in the number of stays reaches 6, and 12 people can live up and down. The soldiers in the two classes are enough. The general price of the market is around 1,600 yuan.

4. Higher upgrade model 5*4 meters

This is a medium -sized military Tent. Paper accommodation can accommodate 8 people. The upper and lower shops can live in 16 people. The price is much higher than that of small and medium -sized tents. The market is generally about 2,000 yuan.

5. Higher upgrade model 5*6 meters

Lauret 12 people, upper and lower shops can accommodate 24 people, and the price is around 2200 yuan.

6. Higher thickening upgrade model 5*10 meters

At present, a large military Tent, which is large in the market.The price of this Tent is also relatively high, and the average market price is about 3,000 yuan.

How to use military tents

1. Spread the Tent on the ground, face the bottom surface, and flatten the folds.

2. Take out the bracket, the Tent is supported by the cross -standing bracket.The bracket can be folded and connect it.

3. The Tent has an inserted port of the bracket in a cross, and the bracket can be penetrated into the Tent from this mouth.

4. Then stuck the bracket of the bracket on the first hole of the band of the four corners of the Tent.As long as the four brackets are supported, the Tent will basically take shape.

5. Fix another hole on the four -corner Belt and fix it on the ground with the buckle of the land.

6. At the cross -crossing position of the Tent, you need to fix it with a rope to be reliable.Especially in the weather with wind and rain, it is not easy to be blown or blowing the Tent.

military Tent installation and use attention

1. Before using a Tent, you must carefully investigate the terrain. Do not have rolling stones, rolling wood, and those weathered rocks above the camp.

2. Do not build a military Tent near the river bank and dried riverbeds.

3. For lightning protection, do not build a Tent in the top of the mountain or the open field.

4. When installing on the mud or sandy land, you can dig a drainage ditch in four weeks in the military Tent to ensure the dryness of the Tent.

5. If you need to cook in a military Tent, you must keep the flame away from the tarpaulin or isolate the flames with a fireplace. When cooking, people must not leave the Tent. They usually make a plan for fire extinguishing and install exhaust fans to eliminate oil fume.

6. When predicting that the local wind is over eight or more, remove the military tents in advance.

7. Before the cotton Tent is stored, be sure to dry the tarpaulin. After it is restored to dry, it is folded and stored. If it is too late to dry the tarpaulin, remember that it must not be stored for a long time to avoid coloring and moldy.

8. Depending on the local humidity and climate, regularly dry the tarpaulin to avoid breeding bacteria.

military Tent standard performance

The fabric of the military Tent is Cotton and linen fabric, which has a thick texture. The construction Tent used for civilian use is Oxford cloth as the raw material.Therefore, military tents often have good waterproof performance.Its waterproof indicators are generally measured with waterproof volume, that is, how many millimeters of water pillars can withstand a Tent of the unit area per Square centimeter.In order to prevent middle rain and heavy rain, general military tents need to reach more than 1500 mm water columns; the amount of military tents with higher quality requirements has reached 3000 mm or even 4000 mm, which can be used to prevent sustainable heavy rain.In addition, the hard texture of the fabric and the characteristics of difficulty deformation also greatly improves its rainproof performance.In addition, military tents can also be used to resist snow with high winds below level 8 and 10cm thick. It has good sunscreen, windshield, and snow resistance, and can provide residents with a safer environment.

The foreign account is the main part of the military Tent, including the two parts of the shed and the four walls. In terms of functional design, the window frames and window sills, valve (ventilators) on the top cover, Tent entrance and Tent installation fixture must be constructed.The inner Tent is made of slightly soft fabrics, which requires its shape to meet the external accounts. At the same time, the entrance should be selected at the same position as the foreign account and the same type.It should be explained that there are three types of military tents: the first type is located in the middle of the vertical side of the Tent; the second is directly opened on the wall of the Tent with a font incision.On the basis of adding an outer chamber, the external projection forms a small corridor.

In addition to the above -mentioned parts, the military tents have certain standards in the pillars (metal Tent ridges), pull rope (including rope, buckle, Sleeve, etc.), and the floor and bottom of the floor.Because military tents are organic combinations of each part of the structure, in order to ensure the quality of military tents, various accessories that meet the standards should be used.Only in this way can we ensure the rationality and performance of the Tent installation, and maintain the service life of the military Tent as much as possible.

Disclaimer: The above method stems from the index of the program system or the sharing of netizens. It is for your reference only and does not represent the research perspective of this website. It proves that it is valid. Please pay attention to the authenticity and authority of the source of the content of the content.Apply to delete & gt; & gt; error correction & gt; & gt;

1. What is a newborn Insulation box

newborn Insulation box, also known as premature Insulation box and newborn culture box, is used for premature infants insulation.Premature babies are afraid that cold is difficult to adapt to the external environment. So it is necessary to put it in the box. It has no effect on children. It is quite a small box with air conditioning to provide children with temperature.Because the physical function of the premature BB can not be fully contacted with the outside world (especially the respiratory tract is vulnerable to infection), it is the safest in the thermal Insulation box, and the Hospital will regularly disinfection.

2. How much is a newborn warm box a day?

The cost of infant warm boxes is relatively expensive, and different regions and Levels may be different.Calculated by day by day, ranging from 500-1000 yuan per day.

The charging standards for living in the heating box are different from the Hospital, and the drugs, instruments, and care of the need to be used during the period will be different. Generally, 1,000-3000 yuan will be required to consult the local Hospital.

There are two main types of babies who need to enter the heating box: one is premature babies, because the body temperature is low, and the ability to regulate the body temperature is not perfect. ThereforeStay in the warm box for 10 weeks, and when the birth time reaches 35 ~ 36 weeks, weighs 1.8 ~ 2.0 kg, it can only be discharged after various life signs stable.The second category is the critical condition that needs better care and observation babies.

3. What is the role of baby warm box

1. Avoid infection.The resistance of premature babies is particularly low. It is placed in The insulation box to avoid the possibility of contacting the outside world, and the air has no dust and bacteria, which plays a role in protecting newborns.

2. Keep warm.Premature babies are afraid that cold is more difficult to adapt to the external environment. The temperature in the thermal Insulation box is very reasonable, and it will control the temperature according to the baby's body temperature.

4. precautions for the use of premature babies

1. Determine the temperature of the box according to the weight of the baby's birth and age.The lighter weight, the smaller the age, the higher the temperature of the box.

2. The heating box should be preheated before the temperature required, and gradually adjust it, and the box temperature should not be lifted sharply in a short period of time.

3. The temperature is the real ambient temperature.The so -called "functional temperature" refers to the average value obtained by the air temperature and the surface temperature of the inside of the box (about the air temperature in the box and the intermediate value of the indoor temperature) in the box wall (about the intermediate value of the indoor temperature).For example, when the box temperature is 32 degrees Celsius, when the room temperature is 20 degrees Celsius, the temperature of the box wall is about 26 degrees Celsius, and the functional temperature is 33*40% 26*60% = 28.4 degrees Celsius.Lost heat through radiation heat transfer.

4. The relative humidity in the box should be maintained between 50 and 55%.

5. Before the out of the box, gradually reduce the temperature of the box, over -dressing, and add a thermos beside you.If the body temperature can be kept 36.5 degrees Celsius, it can be released.

Disclaimer: The above method stems from the index of the program system or the sharing of netizens. It is for your reference only and does not represent the research perspective of this website. It proves that it is valid. Please pay attention to the authenticity and authority of the source of the content of the content.Apply to delete & gt; & gt; error correction & gt; & gt;