Single electric car raincoatHow to stack

The folding method of a single electric vehicle raincoat is similar to that of ordinary hats. Turn the raincoat and fold the buttons. Fold the two sleeves to the belly.The width of the intention.At this point, the raincoat has grown, and the long strip is 30 % off, which is completed, beautiful and portable.(Note that you must dry and put it before putting it)

pairpeopleElectric carraincoatHow to stack

Double Raincoats are recommended to first have two hats, then fold or put the front hat into the hat behind, and then store like wearing a hat.

Electric car hat raincoat specific superposition method

1. Fold the raincoat hat to the right.

2. Fold the long side of the raincoat to the left.(Key points 1: make the upper and lower sides of the raincoat.)

3. Fold the upper and lower sides of the raincoat to the center, fold twice in total, and turn into a rectangular shape.(Point 2: Keep the raincoat flat when folding, so that the raincoat is convenient to save.)

4. Fold the left and right sides at one third of the three -thirds, and then complete the folding.(Point 3: Finally, fold into a small block or a small rectangle, so that put it in the bag, neither worry about occupying the place, nor is it conducive to the preservation of Raincoats.)

Disclaimer: The above content is derived from the provision of the program system index or the sharing of netizens. It is for your reference only and does not represent the research perspective of this website. Please pay attention to the authenticity and authority of the source of the content of the content.Apply to delete & gt; & gt; error correction & gt; & gt;

one,Electric car canopy product materials

1. Use high -tech composite materials (FRP) to production and production.

2. Use imported stainless steel pipes to production.

3. Use PC endurance board to produce panels and side panels.

4. Use a special electric wiper to automatically scrape the rain.

2. Introduction to electric cars rain canopy materials

1. The characteristics of FRP: light quality, high strength, anti -corrosion, insulation.Its intensity is several times that of ordinary plastic boards,The intensity is greater than steel and aluminum.FRP board has the characteristics of high temperature resistance, aging resistance, friction resistance.

2. Features of stainless steel: good ductility, corrosion resistance, good thermal resistance, high clean and smoothness.Because it is not necessarySurface treatment, so it is simple and simple, and the welding performance is good.

3. Features of PC endurance board: good light transmission, difficulty, weather resistance, temperature resistance, good processing, light weight.

Third, the electric car raindrops are good or the raincoat is good

1. Convenience

First of all, in terms of convenience, the convenience of the puff may be higher. After all, it is sufficient to install it directly. You dont need to wear it frequently like a raincoat.There is no problem of folding and cleaning after arriving at home. Although because of the larger rhizon, it will affect the convenience of some electric vehicles on parking, but it is relatively high.Come to block the sun.

2. Show rain

From the perspective of rain -covering, the two should be similar. Although the area of the rain shed looks large, the actual rain covering effect is not so ideal. When the car is stopped, the car will still be wet by the rain and not wet.There is less, and it is easy to let rainfish in during the driving process, especially under the influence of some winds in winter, the angle of rainwater falling will not be straight up and down.It will also appear on the raincoat. Basically, the rain that can be covered by the canopy can be covered. Rainwear is generally no problem, and the rainfall of the raincoat is not too good!

3. security

As for safety, it is definitely a lot better. At present, many cities are already forced to remove the rails, because the safety of the canopy is not enough.After installing the rain shed, the resistance of the electric vehicle is obviously much larger than the non -installed. This will not only cause a greater burden on the battery of the electric vehicle, but also affect its flexibility in the operation and other operations. In addition,, in addition,, in addition,The canopy also significantly increases the height and width of the electric vehicle, which will affect the pedestrian on the roadside to a certain extent, and increase the chance of the pedestrian of electric vehicles.If you stop on the side of the road, it is easy to be blown down by the wind. If the pedestrian does not pay attention, it will be easily crushed by the car, and the raincoat will not have these concerns at all.

Overall, although the rhizon is more convenient than a raincoat, considering it from safety, Xiaobian suggested that everyone is better to choose Raincoats when choosing electric vehicles.Wear some, and you ca nt put the rain directly in the car, but it is really much better in safety. It is obviously not worth it!