How to make homemade outdoor folding table outdoor folding tables making
How to make homemade Outdoor folding tables
The outdoor folding table is light and portable, which is very suitable for outdoor activities. Now there are many Outdoor folding tables on the Internet. If you have a strong hands -on ability, you can also make an outdoor folding table yourself.Here are some ways to make several Outdoor folding tables:
Practice
1. Prepare the production materials and tools: wooden boards, electric diamonds, saws, tape measures, live pages hinges, nylon ropes, right corners, hammers, nails.
2. Cut the wooden board, use nails to set up a right -angle arched bracket with a nail, and insert a beam board at the middle height of the two standing feet of the bracket.
3. Make four shelf wooden frames, screw screws, and connect the shelf brackets through the live pages.
4. Drill the hole in the middle of the beam board. After entering the nylon rope, knots both ends of the rope head.
5. A pair of shelf desk brackets that are completed can usually be folded. When used, open a wooden board on it, which is a simple folding small table.
Two Practice
1. First make a small shelf in the rear.
2. Care on the desktop legs on both sides. Pay attention to the hollow and cut style of the table legs.
3. Fix the side plates of the table legs and the shelves with long hinges, and test whether it can be retracted freely.
4. Finally, the desktop and shelves beam are chain with long hinge (the reason why the side plate hinge is installed first and then installed the desktop to wrap the desktop legs).
Three
1. Saw wooden strips: 4 desk legs, 4 desktop support rods, 4 short fixed rods, and two long fixing rods (the thickness of two table legs is shorter than shorter).
2. The 4 tables legs are drilled at the intersection of the table you need, and the positions of the 4 holes should be consistent.
3. Drill the desk leg and the desktop support rod.The drill size is a little larger than the bolt.
4. Start assembled the desktop. First, use a short fixed rod with a short fixed rod and nail, and then nail the outer desktop legs and upper bolts.
5. When you put on the bolt, you will find that the bolt head of the table legs and the support rod protrudes, and the table legs cannot be merged. At this time, you need to use a large drill bit to drill out the holes and let the bolt head sink.
6. After installing the desktop, you will see that the top of the table's legs protrudes the support rod plane, so you must see the excess part, or you can't install the desktop.
7. Finally, fix the desktop with wooden screws to the desktop and complete.
Four
1. Prepare materials and tools: wooden boards, hammers, planers, and desktops are painted with paint -free ecological boards.
2. Seal the desktop edge, stick it with glue, knock gently, and press it tight.
3. The wooden strip line, planing flat, drilling, and then draw the thread, saw the position of the hoe, and punch.
4. Apply glue, then sting together, add wedge fixing.
5. The table legs and two windows can play a fixed role. One end of the table legs is connected to the desktop with a harmonious pages.
6. Add a wooden bar under the desktop to ensure that the table will not fall when the window support is not tightened.
7. Finally, brush the table legs with two layers of paint, which is convenient for cleaning in the future. A simple outdoor folding table is made.