1. The advantages and disadvantages of Solar street lights

Solar street lights are used to power the light energy through the Solar circuit board to power the lamp. This kind of energy -saving and environmentally friendly street lights are used more and more. Is Solar street lights easy to use?

1. The advantages of Solar street lights

(1) The installation is easier: The initial laying cable of the conventional street lighting project is a very difficult basic project. First, the excavation of the wire ditch, the launch of the wire Tube, the internal pipeline, the earthwork backfill, and the vegetation recovery.Then carry out long -term installation and debugging. If there is any problem with any line, the inspection work is more complicated, and a large area of rework may be required.Strict requirements for terrain and lines, high auxiliary materials and labor costs.The installation of Solar street lights is relatively simple and cheap: When installing solar energy, you don't need to lay complex lines. You only need to make a cement base, and then install the light rod.

(2) Low use cost: The daily use of conventional street lights requires high electricity costs. It is necessary to maintain or replace the lines and other configurations for a long time, and the maintenance cost increases year by year.Solar street lights do not require electricity bills, only one investment is required, and there is basically no maintenance cost in the later period, which has benefited for a long time.

(3) Safety: Conventional street lights have hidden dangers in terms of construction quality, aging materials, abnormal power supply, and conflict of water and electric pipelines: Solar street lights use 12V low -voltage power supply, operate safe and reliable, safe and reliable, no energy saving, no consumption, green, green, green, green, greenEnvironmental protection, easy installation, and automatic control of maintenance exemption.

(4) Energy -saving and environmental protection: Solar street lights use Solar light as the source of energy, without consuming conventional electrical energy, solar energy is inexhaustible clean energy, which is in line with the state's national policy that advocates green, energy saving and environmental protection.

2. The disadvantage of Solar street lights

(1) High cost: The initial investment in Solar street lights is large, and the total cost of a Solar street light is 3 or 4 times that of the same power conventional street lights.

(2) Low energy conversion efficiency: The conversion efficiency of Solar photovoltaic batteries is about 15%to 19%. In theory, the conversion efficiency of silicon Solar cells can reach 25%, but after actual installation, the efficiency may be reduced due to the blocking of the surrounding buildings.Essence

(3) Affected by geographical climatic conditions: Due to relying on the sun to obtain energy, the local geographical climate and weather conditions directly affect the use of street lighting.The rainy days will affect the lighting Lights, causing the illuminance or brightness to meet the requirements of the national standard, and even the Lights appear. Because the light is insufficient during the day, the light time at night is too short.

(4) Low life and cost -effectiveness of components: The price of batteries and controllers is high, and the battery is not durable enough. It must be replaced regularly.

(5) The brightness is relatively low: Compared with the city circuit light, Solar street lights are usually half -power or lower power, low brightness, and the general illumination range is 6-7m.The need for roads and main roads.

2. What road is suitable for Solar street lights

The advantages and disadvantages of Solar street lights are obvious. When used, it can avoid strengths and avoid weaknesses, so that Solar street lights can better play.Generally suitable for installing Solar street lights:

1. Highway street lighting in rural areas, towns and villages

Solar street lights use LED street lights. The advantages of environmental protection and energy saving, low maintenance costs, and non -municipal film interruptions have made rural Solar street lights a landscape of new rural areas.

2. Urban squares, parking lots, school playgrounds, workers' green space, Park lighting

Large -scale urban street lanterns need long -term lighting to consume a large amount of city electricity.Solar street lights use LED street lamp heads, such as energy saving and power saving.Therefore, replacing the city circuit Lights of these places with Solar street lights is a very effective way of energy saving.

3. lighting of golf stadium, seaside bath, high -end villa area and other lighting

The lighting of golf courses, seaside baths, and high -end villa areas often requires Landscape light decoration. Now the Landscape lights can also be powered by Solar panels. The Solar landscape street lights produced are perfectly combined with technology and art, highlighting the beauty of the times.

4. Highway warning signs, bridge street light power replacement

Highway warning signs and bridge street lights replace them into Solar street light products, which can continue to effectively supply power on highway warning signs and bridge street lights, and do not need to maintain it frequently, saving a lot of maintenance costs.

1. Court -light cleaning method

1. Internal cleaning method of lighting

When cleaning the Light bulb of the courtyard, turn off the Lights first, and then remove the bulb for wipe.If you clean it directly on the lamp, do not clean it clockwise, because it may cause the lamp head to twist too tightly, causing the lamp head to peel off.

2. External cleaning method of lighting

The Lights of the garden Lights are generally more dusty outside. First of all, you need to clean it with a wet rag, and then wipe it with a dry rag or dry newspaper.The strength must be gentle, don't be too strong.

3. cleaning of light rods

There are more dirty things on the garden light rod, especially the lower half of the light rod. We can use dry cloth dipping with detergent to wipe it, and then wipe it with a wet cloth with wiping water several times.Be careful not to directly clean the water to avoid short circuits of the wires.

2. Daily maintenance of the garden Lights

1. Regular inspection and cleaning

The courtyard lamp is an Outdoor lamp. After the Outdoor placement time is long, a large amount of dust and dirt will be accumulated. Not only will it affect the beauty of the garden Lights, but also may affect the use of courtyard Lights. Therefore, we must regularly check and clean the garden Lights.

2. The garden lamp also needs maintenance and maintenance

On the basis of delineation of the garden light management zone, implement the maintenance responsibility system at all Levels, implement a management system of settlement, job, and duty, regular inspections, regular maintenance, and evaluate the problems that appear on the person to improve the person in charge to improve the person in charge.A sense of responsibility.Do not hang items on the courtyard light; frequent switching courtyard Lights will greatly shorten its service life, so the use of lamps can minimize the switch.

3. Strengthen the training of maintenance personnel

With the advancement of urban garden lighting technology and the widespread use of new technologies, maintenance personnel need to continue to learn new professional maintenance knowledge to meet the needs of the work.

4. Old parts need to be updated in time

After the garden Lights have been used for a long time, they need to replace the aging parts in time. Otherwise, these aging parts will affect the overall use effect, and may also affect other normal parts.

1. What is the scenery complementary street lights

Scenery complementary street lights are a new type of energy -saving street lights, which are composed of components such as Solar cell panels, wind power generators, wind -complementary street light controllers, batteries, and LED light sources.When the user needs to use electricity, the inverter transforms the DC electricity stored in the battery pack into AC power. It can not only reduce the dependence of conventional electricity through the transmission line to the user load at the user load, but also provides new rural lighting to provide new rural lighting.Solution.

2. What are the working principles of the scenery complementary street lighting system

Scenic complementary power generation system is a device that converts wind energy and light energy into electrical energy.The rectification and voltage of the device convert the AC power to DC power, charge and store the power of the battery pack.

The Solar panel uses the most conversion rate of the most conversion rate of single crystal silicon Solar panels. The photovoltaic effect is used to directly convert the solar energy into DC electricity. When the wind energy resources are insufficient, it can be used for load use or stored in the battery for later use.

The core of the complementary system is that wind energy and light energy complement each other, forming a set of power supply systems that can run independently.

3. precautions for the design of scenery complementary street lights

1. The choice of fan

The fan is the iconic product of complementary street lights. The most important thing for the design of the fan is that the fan is required to run smoothly.Because the lamp rod of the scenery complementary street lights is a placeless solea, it is necessary to be careful about the fixed parts of the lampshade and Solar stent when the vibration of the fan is loose.Another main factor of choosing a fan is the beautiful shape of the fan, the weight is light, and the load of the tower is reduced.

2. The best configuration design of the power supply system

To ensure the lighting time of street lights is an important indicator of street lights. As a independent power supply system, the scenery complementary street lights have a problem with the optimal design of the capacity of Solar batteries and energy storage systems from the selection of street light sources.The natural resources conditions for installing street lights to design the best capacity configuration of the system.

3. The intensity design of the light rod

According to the selected fan and Solar cell capacity and high level of installation, the design of the light rod strength in combination with the local natural resource conditions is combined with the local natural resource conditions to determine the reasonable light pole and structural form.

Disclaimer: The above method stems from the index of the program system or the sharing of netizens. It is for your reference only and does not represent the research perspective of this website. It proves that it is effective. Please pay attention to the authenticity and authority of the source of the content of the content.Apply to delete & gt; & gt;Correction & gt; & gt;

General installation steps of lawn Lights

When the lawn light is installed, the lamp shell should be turned on, the light source and the supporting electrical appliances are installed, and the leading line is attracted from the thread hole to the bottom of the light pole.The flange is aligned with the basic embedded piece screw and stands vertically.Then use a nut or flattener to tighten the nut.

1 , Embedded pipeline.When the lawn lamp is wiring, a wire that is smaller than the power distribution phase wire is used as the ground wire to connect the metal shell of the lamp or the lamp column, and the ground wire is connected to the "ground" of the system.If the length of the ground line is in 25 When the meter is above the rice, the end is repeatedly grounded, and the repetitive ground can be buried. 4mmx40mm ,long 25 Dillarly flat iron of rice, beat 5 Extremely connecting ground, grounding pole adoption 5 50 Galvanized angle steel, long 5 Mi, vertically hit the ground, is welded from the grounding pole to the galvanized flat iron.

2 Foundation.The basic pouring work of lawn Lights is generally done in the early stage by construction workers, but it should be noted that the embedded pipeline needs to be used to avoid normal use in the later stage.

3 , Install lawn Lights.Open the packaging of the lawn lamp and check the integrity. Refer to the product manual to assemble the lamp.The usual method is to turn on the shell, install the light source and supporting electrical appliances, attract the leading line from the thread hole to the bottom of the light pole, then link the light head and the light rod.The stubborn screws are aligned and standing vertically.Then use a nut or flattener to tighten the nut.

4 , Power cable wiring.The wiring of lawn Lights is best carried out by a professional electrician master. At the same time, it is necessary to do safe and reliable grounding, so as not to leave potential risk factors for later use.

Pay attention to safe and reliable grounding in the installation of lawn Lights

When the lawn lamp is wiring, a wire that is not less than the power distribution line is used as a ground wire to connect the metal shell of the lamp or the lamp column, and the ground wire connects the "ground" of the system.When the length of the ground line exceeds 25 meters, the end of the end is repeated. Repeated grounding can bury a 4mmx40mm, 25 -meter -gross -zinc -galvanized flat iron, hit 5 grounding poles.The vertical hitting underground, the grounding pole is both welded with the galvanized flat iron, and the ground resistance is required to be less than 4 Euros.The grounding pole of the light rod must be welded firmly, tiny at the joint, and the PE protective line of the street light power supply must be pressed with a spring cushion to the top and then screw the nut.For example, when we are greater than 25 meters, we need to do again repetitive ground at the end. Then repeat the grounding is a galvanized flat iron with a length of 25 meters in length. At the same timeAfter the vertical hit the ground, welded.

Pay attention to the pitch of lawn light installation

lighting is 0.5 meters high and 23 watts of energy -saving lamps require a distance of about 11 meters. This is the best lighting effect and can save a lot of costs.The distance between the garden Lights is about 25 meters, and the lawn Lights depends on the specific conditions and requirements. Some rockery and pavilions will be installed more.

The installation of lawn Lights is a problem that needs to be considered in multiple aspects. When the user is installed in specific installation, you must also pay attention to it. You must choose good quality lamps, especially in more humid places.Lights.The installation of the lawn Lights can ensure that the installation effect is good, and it can also have a safe effect, so that the effect of use can be better displayed.

1. How about the garden light for Solar lamps?

The courtyard light is an Outdoor lamp. It can be used as decorative items during the day. At night, the Lights can be emitted to bring us light. Many parks, squares and other areas will be installed with courtyard Lights.

Solar courtyard Lights are a type of garden lamp. It uses Solar radiation energy as energy. It uses Solar panels to charge the battery during the day. At night, the battery is used to power the courtyard light source.Safe energy saving and pollution -free, and energy saving and environmental protection. Today, it is a better outdoor lamps that advocate green development.

2. Analysis of the advantages and disadvantages of Solar garden Lights

Solar courtyard Lights are composed of Solar battery components, brackets, brackets, light rods, lamp heads, special light bulbs, batteries, battery boxes, floor cages, etc.Regional lighting and decoration, such Solar garden Lights have both advantages and disadvantages:

1. The advantages of Solar garden Lights

(1) Green and environmental protection, high safety factor, small operating power, no hidden safety hazards, can also be recycled, small pollution to the environment, is a green lamps with energy saving and environmental protection.

(2) The light is healthy, the light of the Solar courtyard light is soft and not dazzling. The light does not contain ultraviolet and infrared rays, does not generate radiation, and has no light pollution.

(3) Life is long. Because the semiconductor chip is glowing, there is no filament and glass bubbles, and the accumulated life can reach tens of thousands of hours, which is higher than ordinary courtyard Lights.

(4) High use efficiency, can effectively convert solar energy into light energy. 90%of the power can be converted into visible light, which is much higher than ordinary incandescent lamps.

2. Disadvantages of Solar garden Lights

(1) Unstable, in order to make solar energy continuous and stable energy, and ultimately become an alternative energy to compete with conventional energy, we must solve the problem of energy storage well, that is, storage of sun radiation energy as much as possible.For night or rainy days, the problem of energy storage is the weakness of Solar use.

(2) The cost is high. Because of the efficiency and instability, the cost of Solar courtyard Lights is still relatively high. The cost -effectiveness cannot be compared with traditional conventional Outdoor courtyard Lights. To further develop, it needs to solve economic problems.