1. How long can the Solar lawn Lights be on

Solar lawn Lights are a green energy lamps. It consists of light sources, controllers, batteries, Solar cell components and lamps. It is a type of courtyard light. It is mainly installed on the lawn.Park lawn landscaping embellishment.So how long can Solar lawn Lights be on?

Solar lawn Lights are different from traditional lawn lamps. Because they choose Solar cells as power supply and use LED light sources, their lighting time can be controlled.The lighting time of Solar lawn Lights can be set according to the needs of the user, which is related to the choice of Solar cell components and batteries. The greater the power and battery capacity of the Solar cell module, the longer the lighting time. Generally speakingIt can ensure that whether it is sunny or rainy, it can maintain a lighting time for 5-8 hours.

2. What should I do if the Solar lawn lamp is not on?

Solar lawn Lights are often used for grassland lighting. As a type of Outdoor lighting, it sometimes causes damage and is not light. So what is the reason for Solar lawn Lights?The reasons and solutions of Solar lawn Lights are not bright: as follows:

1. Damage of light source

Due to the natural or artificial reasons, the light source is damaged, causing the Solar lawn light system to be unable to work, when it is bright and not bright, flickering, etc. during maintenance or replace the light source.

2. Damage to Solar panels

When the Solar panel does not have any load, it is connected to the universal meter to test its voltage. Generally, the working voltage of the system is 12V. Under normal circumstances, it will be higher than the 12V voltage. Only the voltage is higher than 12V.Charging the battery, which causes the Solar lawn Lights to not work or work time, and the Solar panel needs to be replaced.

3. The positive and negative pole of the Solar panel

The Solar courtyard lighting system will only light up once after installation. After the battery is used, the Solar courtyard light will never be on. At this time, the Solar cell board is generally needed to change the positive and negative pole.

3. precautions for the use of Solar lawn Lights

When installing and using Solar lawn Lights, the matters that need to be noticed are:

1. Pay attention to the height of installation. Do not allow the height of the lawn to be higher than Solar lawn Lights, so as not to affect the collection of solar energy.

2. When the Solar lawn light is installed, a wire that is not less than the power distribution phase wire is used as a ground wire to connect the metal shell of the lamp or the lamp column to ensure good and reliable grounding.

3. Pay attention to the pitch in installing Solar lawn Lights, so that the lighting effect is better and ideal, it can also save costs.

1. Steps of the installation process of city circuit lamps

The city circuit lamp consists of the lamp head (light source), light pole, embedded parts, mixed soil foundation, lightning -absorbing corner iron, PVC Tube, wire, cable, control box (time and space switch, exchange contactor, leakage protection device) and other parts.The installation process steps are: basic positioning basic pouring construction cable protection groove slot slot threading pipe support threading cable protection groove backfill lamp wiring street light control installation:

1. Basic positioning

The survey address is determined to determine the position of the light pole. At the same time, there is no cable, pipeline and other facilities below the excavation location. Based on the above, the high -voltage wire must be avoided, and the leaves are used to avoid the safety of the leaves to ensure the safety of construction.

2. Basic pouring construction

Dig a basic pit with the corresponding size according to the drawings, then enter the lightning -absorbing angle iron, use the concrete to enter the cushion, and then fix the embedded parts; finally put two in less than less than 30mm arc -shaped threading Tube, the threading Tube of the threading Tube, and the threading Tube.One end is placed in the center of the four screws of the embedded parts, one of which comes in in the direction of the main cable, and the other one ends in the direction of the main cable.

3. Cable protection groove slot

In the case of cement pavement or street road surface, a cable protective groove should be dug into the cement slot. The depth of the slot should be determined according to the actual situation.

4. Circuit Tube supplement

The thread is generally used for cables. One end is fixed on the guidance steel wire. The piercing rod is introduced. On the basis of embedding, there is -shaped semi -circular, which is used for wiring.The length of each round line is determined.

5. Cable protection groove recovery

The hidden project can be filled in the cable protection groove after confirming the qualification, and the layered landfilling when the backfill is returned.

6. lighting assembly

Divide the light rod to each foundation, and assemble the light rod arm on the side of the road parallel. Do not scrape the wire in the light rod during the thread to protect the cortex;Adjust the parallel degree of the light surface and the parallel surface of the light head and the elevation of the light head, and try the temporary power supply.

7. Establishing rod wiring

The vertical rod is divided into two types: artificial vertical rod and mechanical vertical rod. Pay attention not to press the French disk to the wire and cable to prevent the leakage of the Skin.Do not touch the surrounding high -voltage lines or other buildings when standing.Add the cushion under the buried nut and use nuts to fasten.Effect the light rod, the light pole must be perpendicular to the road surface.Then faste the pads of the lightning -absorbing angle iron, and the conditions are allowed to be welded to ensure that the light rod is connected to the pile with the lightning corner.Do a good job of connection between the main cable and the wire in the light rod, and do a good job of waterproof treatment. The phase wire of each lamp should be installed with a fuse. The fuse should be fixed., The upper end of the fuse should be connected to the wire, the lower end is connected to the power supply, and the lamp rod is connected to the ground wire at the same time.

8. Street light control installation

Street light control box components include leakage protection, timing microcomputer switches, AC contactors, separation switches, and electric meters. Check whether the connection is correct and whether the wiring is firm., Finally connect to the distribution box to connect the ground wire.

After the above steps, the rust -proof processing of the street light rod can be embedded in the street light rod. If the conditions are conditional, add an additional nut fastener. After the liquid asphalt is brushed, the city circuit light is installed.

2. What are the requirements for Outdoor street lights?

1. The protection of Outdoor street lights is divided into TT and TN systems, of which the TN system is divided into TN-C, TN-S, TN-C-S system.

2. The TT method refers to the protection system that directly grounds the metal shell of the street lamp steel rod, commonly known as single Lights.When the metal shell of the street -lamp steel rod is charged, the danger of electric shock is reduced by a low -voltage section. It is suitable for places where ground protection is very scattered. At present, it is rarely used.

3. The TN method of power supply system is the protection system that connects the metal shell of the street light steel rod with the working zero line. It is also known as the zero protection system of the street light connection. Once the device appears, the zero protection system can raise the leakage current to a short -circuit current to a short -circuit current.This current is very large, which is 5.3 times the TT system. In fact, it is a relatively short -circuit failure. The fuse of the fuse will melt.Safety.

4. The welding of the ground wire should comply with relevant regulations: flat steel is twice the width of its width, and at least 3 edges are welded. The round steel is 6 times the diameter. When the round steel is connected to the flat steel, the length of the round steel is round steel.6 times diameter.

Disclaimer: The above method stems from the index of the program system or the sharing of netizens. It is for your reference only and does not represent the research perspective of this website. It proves that it is effective. Please pay attention to the authenticity and authority of the source of the content of the content.Apply to delete & gt; & gt;Correction & gt; & gt;

1. How to build garden Lights

1. Consider the scene situation

Due to the different types and planting methods of trees, flowers, and grass in the courtyard, it will affect the appliances and arrangements of light design.Therefore, make a choice of lighting according to the actual situation of the scene.

2. Refer to the water scenery

Static water Lights are generally combined with the pavilions, pavilions, aquatic plants, and cruise ships on the water to create a soft atmosphere.And water can achieve better visual effects on the mirror effect produced by these elements.

Dynamic water should combine the flow of water and use the expression of light to illuminate the dynamic beauty of water.

3. Refer to the garden road

For more spacious roads, you can use courtyard Lights directly.

Setting garden Lights on both sides of the garden road on the lush trees can not only provide lighting for the garden road, but also reflect the beauty of the garden road.

4. Consider architectural style

According to different architectural styles, different lighting methods are selected.Generally, more outline lighting can be used, which can highlight the outline of the building and adjust the light.

2. What style of the garden light is good

1. Chinese courtyard lamp

The design of Chinese courtyard Lights is mostly Chinese classical elements, which are used and modified, such as palace lamps and lantern lamps.

2. European -style courtyard lamp

The design of Chinese courtyard lamps mostly adopts some European -style art elements in European countries, and abstract expression forms. Generally, many curved lines are used to show the complex beauty of Gothic.

3. Modern style courtyard light

Modern style courtyard lighting design mostly uses modern art elements, and uses simple techniques to express, giving people a simple, simple and high beauty.

4. Antique style courtyard light

The antique garden light is a lamp that integrates modern element design on the basis of Chinese classical lamps, with both simple beauty and modern technology beauty.

Disclaimer: The above method stems from the index of the program system or the sharing of netizens. It is for your reference only and does not represent the research perspective of this website. It proves that it is effective. Please pay attention to the authenticity and authority of the source of the content of the content.Apply to delete & gt; & gt; Correction & gt; & gt;

1. Troubleshooting device fault characteristics

Failure 1: After installation, the headlights work normally, but the instrument Taiwan big light fault alarm Lights are on

This is a very common failure. It may be because the pyrine lamp and the stabilizer are not matched. You should choose the same voltage of the pyrine lamps and stabilizers.

Failure 2: After installation, the Light bulb has a flashing flashes or often off or the left and right Lights.

Most of these causes of failure are line problems, which may be caused by the stability device's start -up current.At this time, the working current of the headlight line needs to be checked normally.

When the stabilizer squeaks in the work, this is the sound of the transformer work inside the stabilizer. This situation is normal.However, the sound is too loud, and the cover can be heard outside, it means that there is still a quality problem in the transformer. Please rest assured that this will not affect the use. If it is serious, replace the stabilizer.

2. Method of determining whether the stabilizer is damaged

1. When the lamp is not bright, twist the Light bulb to replace the new Light bulb. If the new Light bulb is on, it is the problem of the bulb; if it is not bright, there is a problem with the stabilizer.

2. Check the interface of the stabilizer line beam. If the socket has a loose or a problem with the line, the stabilizer will fail; if the plug is normal, it is the problem of the stabilizer.

3. How to detect good or bad on the airlight lamp

1. Bullet test

(1) Different way

a. Whether the electrodes of the two ends of the light ball have a serious loss.

b. Whether the ceramic Tube has broken and broken.

c. Whether the visual wire wire is broken.

d. Whether the visual lamp Tube is broken and damaged.

e. Whether the lamp Tube column is broken and broken.

f. Whether the visual lamp is loosened or not.

g. Whether the base is loosened and falling off.

h. Whether the Light bulb power line has a loose and falling off.

i. Whether the light ball has cracks or rupture.

(2) Test method

a. Take a good Ballast as the benchmark for testing HID Lights.

b. Prepare a power supplyer and adjust its voltage to 13.20V as the test benchmark voltage.

c. Pick up all wiring first and turn on the power supply to test whether the Light bulb will light.

d. If the power is turned on and cannot light up the HID light, it means that HID is damaged.

2. Stability device test

(1) Different way

a. Whether the visual power line group is destroyed or damaged.

b. Whether there is a destruction or damage to the visual control line group.

c. Whether the high -voltage line group is destroyed or damaged.

d. Whether the high -pressure box line group is damaged or damaged and leaked.

e. Whether the body of the stabilizer is destroyed or damaged and leaked.

(2) Test method

a. Take a good HID light as the benchmark for testing Ballast.

b. Prepare a power supplyer and adjust its voltage to 13.20V as the test benchmark voltage.

c. Pick up all wiring first and turn on the power supply to test whether the Light bulb will light.

d. If the power is turned on and cannot light up the HID light, it means that Ballast is damaged.

e. If you turn on the power to light up the HID light, it means that Ballast can light up, but you need to check how much its power input current is to determine whether the function of the stabilizer is normal.

The determination benchmark is as follows:

Normal input current range between 3A-5A.

Greater than 5A indicates that the work efficiency of the stabilizer is reduced, resulting in increased consumption power and decreased reliability.

Smaller than 3A indicates that the work efficiency of the stabilizer and the decrease in reliability may cause the Lights to light up.

1. What is the flashing light?

Blasting Lights, also known as the frequent flashing light, use electronic means (such as programming single -chip microcomputer IC, etc.) to make the light source flickering slowly or quickly to play a warning.The flashing light has been used on the police car before, rarely used in the people. This kind of policeburstThe flashing Lights belong to the controlled items.It is now widely used in entertainment venues, road traffic, advertising brightening, vehicle ships, public security police and other fields.Although the state has no mandatory requirements for the installation of flashing Lights, it cannot be used in the state or city.

2. What are the uses of flashing Lights?

1. Basic role

The role of flashing is to remind and warn. For example, if you have an emergency, you need to attract the attention of others. You can explode, so others will notice you.For a simple example, it is at night when you stop the car on a high -speed car. It is happening at night. You can explode the car after the flash warning. Of course, you cannot shoot the driver's cab.During the fire, he was trapped in the house and flickered to remind people outside to save himself.Flashing can also cause dizziness. There is a certain self -rescue function. There are not many opportunities for daily use. It is useful at critical moments.

2. Modified family

With some low -frequency flashing small power decorationburstFlash lamps appear in the car supplies market, and many lovers who love modification willburstThe flashing Lights are one of the essential weapons for the car -loving modification.

3. Daily necessities

There are many LED pocket -shaped flashlights on the market, which is very suitable for enthusiasts who like wild activities.The shell of metal alloys has the function of strong light, work light, and flashes. LED is energy saving, environmental protection, long life, and convenient to use, and the continuous lighting of this flashlight is very long.It reaches 8 hours, and the work light is 19 hours, and the brightness of the work is also very bright.