one,Luya poleType of water drop wheel

1. Magnetic brake wheel

Magnetic brake wheel, its main feature, there is a magnetic adjustment knob on the outside, which can be adjusted at 0-10, 10 is the maximum brake force.

2. Corresponding brake wheel

The main characteristic of centrifugal brake wheels, the side cover is easy to open, the main adjustment of the brake Beans controls the brake power, and the brake Beans are all launched to the outer layer to the maximum brake force.

2. How to use Luya water drops wheels

Let s take the magnetic brake wheel as an example to introduce the way to use the Luya water drop wheel.

1. Adjustment of unloading

Generally, we adjust the astrological board (the round fork of regulating the unloading force) to the most tight or with line-up power, and adjust the magnetic adjustment knob to 10 (marked with 0-10 brake power)force.Raise the pole 45 degrees, adjust the main axis screw, so that the fake bait can quickly fall, and it can continue to rotate to the wire axis to the water in the water, so that the best throwing distance can be obtained.

2. Throwing techniques

Pay special attention to the throwing of the water drop wheel. First of all, the fake bait is about 10 grams, and the distance is controlled at a position of about 10cm from the pole tip.

Luya pole water droplet wheel is the main thing is to control the strength of throwing and braking. It is better to use moderate intensity at the beginning, because if there is no experience, it is not easy to see the location of the fake bait, and it is not easy to grasp the direction of the bait.It is difficult to grasp the timing of the brakes and may cause the bait to go out in the expected direction, or even hurt passers -by.

After the bait is thrown out, you must pay attention to observing the fake bait exercise. Use your thumb to hold the wire with your thumbs about 20cm before falling water to prevent the wires from rotating again.After the water resistance movement slows down, the bait line cup will continue to appear due to inertia, so that the line will explode on the online shaft.

3. precautions for using water Drop wheels

1. Do not install the line too much, it is best to use about 2/3.The size of the wheels is different, the capacity of the capacity is small, and the diameter is different, but in general, there is enough 70-80 meters.A simple truth is that the loading line is full, the radius of the coil is large, and the rotation of the line is fast when the line is out. When the line is more than Luya, it will easily bombard.

2. During the practice, the novice uses the cheap nylon line (the local tyrants casually), so as not to cause unnecessary waste. It is recommended to use line 3 to practice, and then use the PE line when it is officially fishing.

3. It is best to be in an open place when you throw your pole, so that you can throw it as you want without worrying about hitting people.

4. It is not recommended to throw less than 4 grams of fake bait with a water drop wheel.

5. Please use heavier fake bait for practice throwing. It is not suitable to replace with heavy lead.(Heavy lead is not conducive to visual inspection of its moment before falling water)

6. In order to throw a farther distance, it is recommended to use ultra -hard rods!

1. What is the power gliding umbrella

Power gliding umbrella, also known as the power umbrella, is a type of flying umbrella. It belongs to individual leisure flight. It consists of two two parts of gliding umbrella and engine. Through power gliding umbrellas, people can glide and climb in the air.

Power gliding umbrella is one of the extreme movements that are popular in the world. In addition to leisure and entertainment, there are also power umbrella advertising, power umbrella performance, power umbrella airline, power umbrella line, power umbrella carrying tourism, power umbrella patrol line patrol line, Power Umbrella Rescue, Power Umbrella Review (such as Lingyun reconnaissance, forest fire prevention) and other uses.

2. What is the difference between power gliding umbrella and no dynamic gliding umbrella

No dynamic gliding umbrella is an ordinary gliding umbrella, and the power gliding umbrella is developed from the gliding umbrella, with power devices. There is still a certain difference between them. In simple terms, no dynamic glide umbrellas depend on the airflow.Global, and the power glide umbrella has a power device to push its flight.In addition, the difference between power umbrella and gliding umbrella also:

1. Different venue requirements

The demand for the environment of no dynamic gliding umbrella for the environment is relatively harsh, at least there must be a hillside, and the trend of the mountain, the height, and so on will directly affect the quality of the flight;, Basically, it is a flat ground, and there is no cover around.

2. Differential air flow requirements

No dynamic gliding umbrellas have no power device, and can only rely on airflow to skate. If there is no airflow, it can only land; the power glide umbrella is different. Even if there is no airflow, you can rely on the power device to crawl and glide.

3. Different take -off requirements

Check the gliding umbrella and equipment before taking off without motivation gliding umbrella; if the power glide umbrella is removed, you should also check the power device.

4. price difference

Power gliding umbrella has one more power device than non -power gliding umbrella, so the price is basically more expensive than non -power gliding umbrellas. The specific expensive depends on the price of the power device.

3. Which is the safety point of power umbrella and gliding umbrella

The gliding umbrella is the extreme movement and is dangerous, but the gliding umbrella has been developing for decades. As long as it does not fly in violation of the rules, the safety rate is still guaranteed. In comparison, the danger of power gliding umbrellaThe umbrella should be higher.

Compared with the non -dynamic gliding glide umbrella, the power glide umbrella may have problems such as falling machines, paddles, falls and other problems when taking off and landing.Like to fly at low altitude, it is difficult to ensure safety.In addition, the gliding umbrella is generally fixed in except for off -road flight. There are fewer unknown safety factors, and the flying route of power glider umbrellas is more random, so it is relatively dangerous.

However, for power gliding umbrellas, do a good job of maintenance of power devices, pay attention to inspection before taking off, prepare safety protection equipment and protective measures, and glide in fixed areas, and the danger is still very small.

[Warm and warm box] What is the characteristic introduction of the warm and warm box characteristics of the warm and warm box

The warm and warm boxes are divided into different types according to different product texture, including plastic, foam, metal, wooden, etc. of various insulation boxes.

Warm and warm box structure

The warm and warm box mainly uses food-grade environmentally friendly LLDPE materials. After the most advanced in the world-the rotating mold pressure process is formed and refined at one time.Anti -ultraviolet rays, not easy to change color, Smooth surface, easy cleaning, good thermal insulation effect, not afraid of falling, can be used for life.The product is used with ice packs, and the cold effect exceeds the United States industry standards.Continuous refrigeration and thermal insulation time can reach several days.

Warm and warm box insulation effect

Put the ice bag in -20 C in the freezer of the freezer of the freezer for 24 hours to fully cool. According to the standard configuration, the temperature in the foam Insulation box can reach 90 hours below 8 C. It is suitable for various medium and long-distance low-temperature drug transportation.

Features of warm and warm boxes

1. heat resistance and cooling: The cooling and cold box of heat -resistant and cold resistance is relatively high. It will not deform in high temperature water, and can even be disinfected with boiling water.

2. Durable: We must have superior impact resistance. It is not easy to crack during heavy pressure or impact. It will not leave scratches and can be used for life.

3. Seal: This is the first point to choose a warm and warm box.Although different brands of product sealing methods are different, excellent sealing is a necessary condition for long -lasting fresh food food.

4. Fresh preservation: The international sealing measurement standard is evaluated by transmitting humidity testing. The high -quality hot and cold boxes are 200 times lower than that of similar products, which can maintain the freshness of things for longer.

5. Multi-functional and diversity: For life needs to design different sizes, with reuse of technology ice packs, ice packs can be kept cold and can be kept heat (the lowest ice pack can be frozen to -190 C, up to 200 C, can be heated to 200 C.Any cut size).

6. Environmental protection: Food -grade environmentally friendly LLDPE materials, non -toxic and tasteless, anti -ultraviolet rays, and not easy to change color.

In April 2012, Anta sports products Co., Ltd. happily announced that the Anta brand was included in the "Global Most Value Clothing brand Ranking List in 2012" ("APPAREL 50 2021") released by the Anta brand.It is the list on the list for the sixth consecutive year.Despite the severe situation of the new crown epidemic, the Anta brand ranked 17th in the list, and the highest ranking of Chinese sports goods brands on the list.It once again demonstrated the steady market performance and brand reputation of the Anta brand, showing strong brand competitiveness.

brand Finance, which compiled the list, has a history of 25 years, and is one of the five international brand value evaluation authority.brand Finance has investigated more than 3,000 companies in the world's more than 30 markets, and inspects from multiple dimensions such as brand value, brand influence, and brand strength to determine brand value. Finally, the ranking data of professional and independent rankings will be obtained.Getting widespread recognition around the world.

Ding Shizhong, Chairman and CEO of Anta sports, said: "We are honored to be recognized by international assessment agencies again, and once again obtain the highest ranking of Chinese sports product brands in APPAREL 50 2021.The pattern has established brand culture and self -confidence.Become a respected world -class multi -brand sporting goods group.

About Anta sports products Co., Ltd.

The Anta brand was founded in 1991, and Anta sports products Co., Ltd. (Share Code: 2020.HK) was listed on the main board of the Hong Kong Stock Exchange in 2007. It is the world's leading sports goods company.Over the years, Anta sports has been engaged in design, development, manufacturing and marketing Anta sports products. It provides professional sporting goods to the mass market in China, including sports shoes, clothing and accessories.Through diversified brand portfolios, including Anta, FILA, Descente, and KOLON SPORT, and formed an investor consortium in 2019, they successfully acquired the Finnish sports brand Group Amer sports Corporation.Peak Performance, Atomic, Suunto, Wilson, etc. Anta sports aims to discover the potential of the public and high -end sports goods markets.

1. What kind of bait do grass carp uses good fishing fishing

1. Tender corn grain

This is the first bait of grass carp. No matter in any season, any waters, the temptation of tender corn kernels to grass carp is very large, especially the corn kernels just picked up.You can seduce all tens of meters around!

2, Wheat grains

The tender Wheat grains may be obtained only in the late spring and early summer. The effect of fishing grass carp is very good, but we can also use wine to soak old Wheat grains to catch grass carp.

3. Reed leaves

When we float grass carp in summer, fresh reed leaves have a lot of temptation to grass carp. Many fishermen have used reed leaves to catch dozens of pounds of grass carp!

4. Pumpkin leaves

In the season when pumpkin grows, we can choose the most sharp fresh pumpkin leaves to fish grass carp. The fishing effect is also very good. If you can use pumpkin leaves to make nests in advance, there will be more grass carps that can be attracted.Intersection

5. Pumpkin flower

When the pumpkin flowers bloom, the effects of pumpkin flowers with fragrant pumpkin flowers are also unusual, and the fishing effect is better than the pumpkin leaves.

6. Commodity bait

It is generally not recommended to use commodity bait in fishing, but if you can't find a suitable natural bait, you can only choose some product bait.

Second, the method of making grass carp bait

Method one

Materials: Prepare leek, corn surface, Flour, bran, sugar, the ratio is 3: 30: 2: 5: 1, and then prepare a little song wine.

The leeks are twisted into thin pens. The corn surface is added with boiling water and evenly bran, and uniform, plus Flour, increase the viscosity, wait for the boiling water to cool and add some sugar, just add a little bit.Stir evenly and make a big cake.Then put it on the pot and steam for about 15 minutes to remove it.Cool, shatter the big cake and put it in the thin pixel of the leeks.After the uniform, add a little bit of wine, rub it into a clean plastic bag, tighten the mouth of the bag, and place it under the sun for a day to two days.

Method two

Materials: corn surface, celery leaves, noodle soup.

Boil the noodles, add corn noodles, stir with chopsticks while adding chopsticks to make corn paste.Mix the hot corn paste to the chopped celery leaves into the pot and ferment to slightly acidic acid.

Method three

Materials: 1 Sweet potato, rough corn surface, a little honey.

Steam the sweet potatoes, add the thick corn surface while it is hot, and steam for another 20 minutes. After taking it out, roll it (mainly rolled the particularly thick corn residue), and then pinch it into a box and put it in the box.After a long time, the bait becomes harder, you can add a few drops of honey to knead.

Method four

Materials: silkworm pupa, corn surface, bran, sugar, Flour.

The silkworm pupa is dried and grinded into powder.Then add a small amount of Flour and rub it to increase stickiness.