[Material of raincoat] What kind of material is the most durable raincoat for buying raincoat?

What is good for buying raincoat?

Oxford cloth

The product fabric obtained by Mianlun or polyester has been obtained by a specific weaving method. It has easy washing and dry, soft feel, good moisture absorption, soft fabric color, soft cloth body, good breathability, comfortable wearing, and double -color effects.

Mianlun (nylon))

The lightness of silk is good, strong and abrasion resistant, but it is easy to deform under external force, so its fabric is prone to wrinkles during wear.

Polyester

The biggest advantage of polyester raincoat fabric is that the anti -wrinkle and preservation are very good, but the chromosome is poor and the hygroscopic breathability is poor.

waterproof and humid cloth

It is a layer of waterproof and humid coatings in the inner side of the fabric, such as Raincoats commonly used by police and climbers, with waterproof and breathable effects, but the price is high.

In short, Oxford cloth is more suitable for waterproof clothing materials, which is determined by its weaving law.

What material raincoat is the most durableRainwear purchase

1Look at the size: Most of the raincoat packaging will have a comparison table that chooses the size of the raincoat, but the size of the Raincoats made by the raincoat manufacturers on the market is different. ThereforeGo to buy Raincoats of different brands, it is easy to have errors

2Try to penetrate: It is best to try it on Raincoats, but usually the Raincoats in the mall cannot be tried. It is recommended to wear it.mPersonnel to buyLThe raincoat, and so on, it will be better, even if you wear more clothes in winter.

3View materials: The material of Raincoats is roughly divided into three categories, with different materials and different prices.Consumers can buy according to the actual situation: Polyethyl chloride (PVC) Material: The jelly semi -transparent plastic raincoat is often seen outside. This raincoat is low in price, but it is easy to damage.

Material with nylon and polyvinyl chloride: another layer of nylon cloth materialPVCThe waterproof layer, its price is moderate and it is not easy to damage. It is the main material of the raincoat now.

Material with waterproof and humid cloth: Apply a layer of waterproof and humid coatings in the inner side of the fabric, such as Raincoats commonly used by police and climbers. Its waterproof and humid layer is10For 100 million micropores, these micro -holes can make gas molecules pass, but they cannot allow large water molecules to pass. Therefore, the waterproof and breathable effect can be achieved. The disadvantage of waterproof and humidity is that the price is more expensive.

[Swiss Army knife Backpack] Swiss Army knife Backpack Really, how to identify you to identify the century -old Swiss military sword bag

Centennial Swiss Army Bags originated from Weigo, a well -known Swiss military knife brand.In 1893, Switzerland was born in the world's first Wenger combination.For a century, Switzerland Wenger has been known as the "only high -quality knife product manufactured with watch technology" in the world's knife industry with its superb mechanical manufacturing technology and professional handicraft technology.Swiss Wenger's luggage products have inherited the brand's century -old cultural connotation, solid quality, and multifunctional design, and quickly became the first choice for consumers in the world. Its classic cross -shaped LOGO is even more famous in the world.

However, many domestic consumers still face the "Cross" cognitive trap when they purchase the "Centennial Swiss Army Bags".Many domestic consumers buy the "Centennial Swiss Army knife Bag", which are usually distinguished by the Cross LOGO.However, not all the "cross" are real "century -old Swiss military sword Bags".At present, there are many packages marked with the Cross LOGO, but some of these brands are similar to the "Centennial Swiss Army knife Bag" logo, and some are the name of the real "Centennial Swiss Army knife Bag" brand Wenger (Weigo) name.Similarly, most of these brands are domestic corporate brands, not the real "century -old Swiss military sword bag".

How can I buy a real "Centennial Swiss Army knife"?

Although various cognitive traps make it difficult to distinguish the century -old Swiss military knife brand Wenger's bottle, as long as you pay more attention when buying, you can still find the problems.It is understood that UTC experts are the only exclusive agent of Weigo Bags in China. The relevant person in charge of UTC experts conducts tricks on how to distinguish the century -old Swiss military sword Backpack.Bid, tag content, etc. are distinguished.

1. LOGO recognition method:

The real "century -old Swiss military knife bag", its cross logo is authorized by the Swiss government. The logo frame is arc -shaped, rounded, and the color is red. It looks scattered.

Centennial logo of a century -old Swiss Army knife brand

Centennial Swiss Army knife brand Weigo Wenger's logo

Second, weaving :

The real century -old Swiss Army knife brand Wenger's luggage is weaved in the luggage. The opposite of the weaving standard reflects the information of the Chinese agent UTC experts, as shown in the figure below.

Third, tag content recognition method:

The real century -old Swiss Army knife brand Wenger Bag, different years and styles of products are used for different listings, and pseudo -products will not pay special attention to the change of details.Each tag has information about UTC experts. As long as consumers pay more attention, consumers will distinguish them.

In addition, as a world -renowned brand, Wenger's work and materials are extremely sophisticated, which is obviously different from other confusing luggage products and brands.The purchase of Wenger's Bags is based on the awareness and trust of the "Centennial Swiss Army knife" brand.On the occasion of another 315, consumers should improve their ability to distinguish, and find the real century -old Swiss military sword brand Wenger from various "cross" luggage.

How to make homemade Outdoor folding tables

The outdoor folding table is light and portable, which is very suitable for outdoor activities. Now there are many Outdoor folding tables on the Internet. If you have a strong hands -on ability, you can also make an outdoor folding table yourself.Here are some ways to make several Outdoor folding tables:

Practice

1. Prepare the production materials and tools: wooden boards, electric diamonds, saws, tape measures, live pages hinges, nylon ropes, right corners, hammers, nails.

2. Cut the wooden board, use nails to set up a right -angle arched bracket with a nail, and insert a beam board at the middle height of the two standing feet of the bracket.

3. Make four shelf wooden frames, screw screws, and connect the shelf brackets through the live pages.

4. Drill the hole in the middle of the beam board. After entering the nylon rope, knots both ends of the rope head.

5. A pair of shelf desk brackets that are completed can usually be folded. When used, open a wooden board on it, which is a simple folding small table.

Two Practice

1. First make a small shelf in the rear.

2. Care on the desktop legs on both sides. Pay attention to the hollow and cut style of the table legs.

3. Fix the side plates of the table legs and the shelves with long hinges, and test whether it can be retracted freely.

4. Finally, the desktop and shelves beam are chain with long hinge (the reason why the side plate hinge is installed first and then installed the desktop to wrap the desktop legs).

Three

1. Saw wooden strips: 4 desk legs, 4 desktop support rods, 4 short fixed rods, and two long fixing rods (the thickness of two table legs is shorter than shorter).

2. The 4 tables legs are drilled at the intersection of the table you need, and the positions of the 4 holes should be consistent.

3. Drill the desk leg and the desktop support rod.The drill size is a little larger than the bolt.

4. Start assembled the desktop. First, use a short fixed rod with a short fixed rod and nail, and then nail the outer desktop legs and upper bolts.

5. When you put on the bolt, you will find that the bolt head of the table legs and the support rod protrudes, and the table legs cannot be merged. At this time, you need to use a large drill bit to drill out the holes and let the bolt head sink.

6. After installing the desktop, you will see that the top of the table's legs protrudes the support rod plane, so you must see the excess part, or you can't install the desktop.

7. Finally, fix the desktop with wooden screws to the desktop and complete.

Four

1. Prepare materials and tools: wooden boards, hammers, planers, and desktops are painted with paint -free ecological boards.

2. Seal the desktop edge, stick it with glue, knock gently, and press it tight.

3. The wooden strip line, planing flat, drilling, and then draw the thread, saw the position of the hoe, and punch.

4. Apply glue, then sting together, add wedge fixing.

5. The table legs and two windows can play a fixed role. One end of the table legs is connected to the desktop with a harmonious pages.

6. Add a wooden bar under the desktop to ensure that the table will not fall when the window support is not tightened.

7. Finally, brush the table legs with two layers of paint, which is convenient for cleaning in the future. A simple outdoor folding table is made.

one,howGrinding ToolLet itKeep the blade sharp

If the Tool is used frequently, polishing is also a good maintenance method in order to maintain the sharpness of the blade.But the polishing here is not really profitable, but to correct and clean up the blade edge of the Tool.After being polished, the Tool can be corrected and can remove some subtle scratches.

Use grinding steel

The use of polishing steel is a good method of maintaining tools, especially for frequent use of kitchen knives such as kitchen knives.Frequent use can keep the blade sharp.

One of the most basic polishing steel is a metal rod with a straight groove on it.And better grinding steel after magnetization, the molecules that can attract the tools to re -arranges it into a straight line.After the knife and polishing steel friction, you can get correction and remove some fine scratches.Unbound ceramic polishing steel also has this effect.Diamond polishing steel is also popular as a new trend in the kitchenware industry. Its surface is covered with a layer of single crystal diamond. It has the same good effect as traditional polishing steel, but it is more durable, lighter, and polished than traditional polishing steel.The speed is faster.

When using polishing steel, use the blade to use the blade20The angle is exposed to the top of the polishing steel, and then gently draws the entire blade along the entire grinding steel to the bottom, as if cutting a piece of polishing steel with a knife.Each time the positive and anti -alternation is used, the two sides of the blade can be polished evenly.

A simple way can determine whether it has been polished:Use your thumb to touch the two sides of the blade, if the feeling of both sides is the same, it means that you have been polished.If a side is slightly rough than the other side, then gently polish this side, and every time it is compared, until it feels on both sides.

But it should be noted here that the polishing of tools is a very professional technology. Different tools and grinders have different methods of polishing. If it is not used properly, it may cause the entire knife to be scrapped.Passionate and necessary, don't easily polish the tools.

2. How to prevent knives rust?

The biggest enemy of the knife is rust, and even stainless steel knife cannot guarantee that it will never rust.As long as the conditions are appropriate, rust spots will appear on the stainless steel surface without hesitation.

1, Avoid humid environment and contact with corrosive items

The seaside, south, kitchen, etc., the knife is put on hold in such a large humidity environment for a long time, and it is easy to rust.

In addition, acidic fruit juice, sweat on hand, oil stains, etc. are easy to corrode the knife body, so it is recommended to avoid contact with such items.

2, After finishing the Tool, be sure to scrub and clean it in time

After the Tool is used, clean it with flowing water, then wipe it clean with dry cotton cloth and towels, and place it in a ventilated and dry place.This can greatly reduce the probability of rust.

3Gentle grinding

The best way to take care of the Damascus knife is to regularly polish the tools for gently, and generally wipe it with a clean cotton cloth or towel.

4, Regularly give the knife oil

When the knife is cleaned or not used for a long time, it should be applied to a layer of protective oil.Because after applying a knife oil, a protective film will be produced for a period of time, which can not only prevent the corrosion of the Tool, but also have a lubrication effect.

Specific method:

Put the knife on the towel, apply the knife oil on the body, and then use the cotton cloth to wipe it slightly back and forth on the blade surface to make it slightly heat.At the same time, you can also rub the handle and Tool accessories.

5How to store tools

The Tool is suitable for places where normal temperature, ventilation, drying, and not direct sun. If there is professional temperature control and dehumidification storage cabinet.

Each Damascus steel knife in the artificial workshop is equipped with a special custom leather handmade scabbard. This very flexible leather component has been specially treated and has a certain moisture resistance.It can also ensure that the tools will not wear during the pumping process.It is recommended not to put Damascus steel knife in ordinary leather sheaths that are not treated, because ordinary Skin sheaths can easily absorb the moisture in the air and bring a bad impact on the Tool.

How long does it take to maintain the Tool?

The first thing to remember is that after the knife is used, it should be cleaned and maintained immediately.

Then, if it is played everyday, the new knife is maintained every three days, and it should not exceed seven days as much as possible.After a long time, it can be maintained once a few months. Frequent play, a layer of carbon -like protective layer is formed on the blade surface, bright and aura.

I hope that these maintenance skills will keep your swords a sharp and good state of use.

1. Is it easy to use the pole before?

The pole of the front is a kind of throwing pole. Because it can slip fish and have the lightness of the pole, it is loved by fishermen. So is this pole easy to use?

Compared to the small fishing rings, it is not easy to hang the line, and the drawing line is better than the middle rod. There is no need to cut the line when storing. The next time it is pulled out and used it directly, so it is more convenient to use the pole.

2. What is the purpose of the front pole

The front of the pole, a kind of fishing rod, a variety of length, adjustable positioning rod can meet the multiple needs of fishermen on different waters and different fishing spots.

Because the fishing method is looking for fish, not a fish to find someone, so often walk around to change the fishing spots, plus some movements to seduce fish, the better.

Generally speaking, most of them use long poles to 4.5 meters to 6.3 meters. Most of them are used in Izuki, and there is another way to develop another short pole in Nagoya, Japan.The pole length is only between 2.1 meters and 3 meters. This is a unique fishing method that specializes in category of shellfish on the stone wall on the embankment or under the big rock on the embankment of the embankment or the big rock along the coast.In the past, the fishing method was one of the methods of fishermen who had to obtain fishing on the banks of the port during the period of the fish or the storm.Essence

The above is the relevant content of the front of the pole and what the purpose of the front pole is used. I hope to help you, there is more information about the pole of the pole. If you are interested, you can click to view it!