1. What is the difference between the domestic version of the sneakers and the foreign version

1. price: Foreign versions of sneakers are generally more expensive than domestic versions, and the price is several times different;

2. Shoe type: The domestic version of the shoe is wide, and the foreign version will be much narrower;

3. Appearance: Due to the wide and narrow reasons, the ingredients of the foreign version are prone to form a trapezoidal structure of the upper narrow and width, and the domestic version may become a state where the upper and lower end tends to be flat.

4, sole material: For example, the outsole of most Vito 1 uses XDR's wear -resistant rubber outsole.The foreign version is a clear crystal transparent outsole.

In general, the core difference between the domestic and foreign version of the shoes is that the shoe is shoe, and the wide tadpole is indeed more in line with the design of Asian feet.However, Kuan Kuan brings a certain risk of rollover to some sneakers, which is indeed a little advantage in foreign version.Most domestic versions are trying to take care of the actual combat of the field.If your feet are narrow and feel that most of the front palms of the sneakers bought in the counter are empty, you can consider buying the same foreign version of the same sneakers.If you want to get the better performance of the same sneakers and put aside the sneakers with obvious design defects, the foreign version may not necessarily have a higher performance advantage than the domestic version.If you pay attention to durability, the domestic version of the shoe outsole is relatively durable.

2. Do you buy a big size in foreign versions?

Is the foreign version of the sneakers small?Yes, because the foreign version of the sneakers and shoes are narrow, it is very suitable for many wide -footed friends, so it is more appropriate to buy one size or half size, and in general, the size and size of foreign shoes and the size andThe size of the domestic shoes has corresponding control tables. When you buy it, you still look at the shoe codes when you buy it.

Third, the foreign version of the sneakers are suitable for who is suitable for?

The foot shape is narrow. Generally speaking, many domestic sneakers are empty. If you ca nt buy it, you can consider buying the same foreign version of the sneakers.Secondly, if you want to get a better configuration of the same sneakers, in addition to the obvious design defects, some of the foreign versions are also good; the last thing is the material of the soles, the domestic version of the shoe sole is relatively durable, thisNo need.

4. Why is foreign version of shoes generally more expensive than the domestic version

Because in the supply session, the domestic version of the supply has a lower threshold, coupled with a large amount of goods, the low market price in China is normal.And the foreign version, returning to domestic shoes from abroad, this itself has established a threshold, coupled with the uncertainty of the supply and the sales volume in terms of sales.Essence

The foreign version is expensive and does not mean that the foreign version is good, so you don't have to believe in the concept of "better foreign version of shoes". It is a better product for your foot -shaped sneakers.

1. What is the material of the mesh suspension

There are many Hammock materials. The most common ones are fabric materials, such as canvas, parachute cloth, etc. Some are also a mesh suspension. So what is the material of the mesh suspension?

The mesh suspension is also called the nylon Hammock. It is made of nylon mesh. nylon net is a chemical fiber woven net with chemical fibers such as nylon wire, nylon wire, polyester silk, and Narun silk.Formed, it has the characteristics of high toughness, good elasticity, corrosion resistance, oil resistance, water resistance, wear resistance, high temperature resistance, weather resistance and other characteristics. In addition to making suspension, it is also widely used in industrial filtration, oil, chemical, printing and other fields.

Second, the suspension mesh is good or good canvas

The mesh suspension and canvas hammocks are suspension of two different material fabrics. In addition to the differences in material, the two are also different in terms of experience and comfort. So which one is the best mesh suspension and canvas suspender?

1. canvas suspension is a fabric of traditional manufacturing suspension. Its biggest advantage is softness and comfort, large bearing gravity, easy to clean, and it is more comfortable to lie down. The disadvantage is that the moisture resistance is poor and the breathability is worse.

2. The advantage of mesh suspension is that the breathability is very good and the heat dissipation performance is better. The disadvantage is that the comfort of lying on the lay down is average, and if a friend with a relatively large weight is lying up, it is easy to have a trace, and the public occasion will be a bit embarrassing.

Generally speaking, the canvas hammocks and mesh suspension have their own advantages and disadvantages. Generally, it is better to use a mesh suspension by the seaside, the lakeside, the poolside and the weather.Essence

What equipment is needed in winter ice climbing

1. Binghao

Binghao provides a focus point.The ice -climbing ice ax is usually a technology pick, which is different from the straight ice average for walking in the snow. The shape and the degree of bending of the picking handle are more suitable for the climbing of vertical ice walls.

2. Bingfish

Bingfish is similar to ice ax in use, which is basically divided into snow walking and ice climbing.The outer teeth of the ice on the snow are flat tooth, which is more conducive to friction on the snow surface.The ice -climbing ice is a higher -intensity vertical teeth. It usually uses a full -card structure, which is more stable and can better convey the power of kicking.

3. Ice cone

Different from the use of expansion bolts as a protective point (anchor point) during exercise climbing, most of the protective points during ice climbing use ice cone.Due to the effects of the terrain, ice condition, and temperature, the strength of the ice cone anchor in the ice will also be very different.

4. Power rope

Ice climbing is recommended to use waterproof power ropes, because the low water absorption power rope can reduce the risk of rope icing, so as to ensure that the rope is normal through the protector.The mainstream diameter used by the rope used by ice climbers is lower than the Rock climbing, usually Single Rope, which is less than 9.7mm, or is protected with half ropes.

5. helmet

The rope protection system used in ice climbing is almost the same as climbing. The same protector, seat Belt, helmet, fast Hanging, main lock, etc.Ice climbing must wear helmets, because the focus of ice climbing is almost done by the damage to ice through ice clamp and ice ax. Therefore, there will be many broken ice flying in the sky. At the same time, it is recommended to use supporting masks or goggles to protect the eyes.

Basic skills

1. Grab: grab the raised part of the rock by hand.

2. Pulling: Hold the edges, gaps, and edges of the rock with your hands.

3. Pull: Under the premise of grabbing the firm fulcrum in front of the front, the arm is stuck in the rock wall, holding the stone seam, and pulling the body upward.

4. Support: Use steps, gaps, or other terrain to move your body up or left and right with your arms and arms.

5. Push: Use the side, the rock body or object below, and move the body with the power of the arm.

6, swelling: put your hand into the gap, and rose with your palm or fingers to grab the gaps of the rock as a fulcrum to move your body.

7. Passion: Use the inside of the forefoot or toe to support the body to reduce the burden on the upper limb.

8. Cross: Use your own flexibility to avoid difficulties to seek favorable support points.

9. Hanging: Hang the rock with a toes or heels to maintain your body balance and move your body.

10. Step: Use a large fulcrum in the front of the feet to reduce the burden on the upper limbs and move the body.

Ice climbing technical essential

1. Basic ice climbing technology

(1) Usage of Ice Pa: Every part of Ice Ka has its own use. Choosing the appropriate ice axard depends mainly on the slope and type of ice and snow slope. Generally, a short-handed ice star with a length of 40-50 cm.Reasonable use of ice aox can save a lot of physical strength.

(2) Front teeth technology: In addition to 12 teeth at the bottom of the bottom, there are front teeth. When the ice wall is climbing, the ingredients of the outer teeth are pierced into the ice wall as the support point of the foot. This climbing method is called the front tooth climbing or German styleClimbing method.Continuous use of front teeth will cause small feet and ankles to fatigue, so you must learn to relax and rest.

(3) Fully -contact climbing: The first step is to step on the second step, then relax the ankle joint at any time, and all the ice teeth are exposed to the ice surface.

2. The way to climb

(1) Three o'clock climbing method: When the ice and snow slope is less than 35 degrees, the climbing method is to hold on the ice average with one hand, the ice ax's rope is covered on the wrist to prevent falling off, and the bottom tip of the ice ax is used on the ice on the ice.The Ice Fojian must be in contact with the ice slope at least two points with both feet.

(2) Balanced climbing method: When the slope is 35-50 degrees, hold the upper part of the ice average in one hand, hold it on the handle of the ice ax near the bottom of the bottom, the high position with the front teeth, and the low-footed feet are exposed to the ice surface.The role of Binghao at this time is to maintain physical balance.

(3) Bullet climbing method: When the ice and snow slope is 45-60 degrees, it should be held on the ice ax and hold it on the handle close to the bottom of the bottom.The top of the pick is inserted into the ice and snow slope as a fulcrum, climbing the front teeth under the feet.

(4) Double pick climbing method: When the degree of ice and snow slope is greater than 60 degrees less than 90 degrees, and the hardness of the ice slope is not very large, the climbing method is to hold the top of the ice pick tightly with both hands and plug in the ice and snow slope like a dagger to rise or fall alternately.If the hardness of the ice slope is high, the climbing method is to hold the bottom of the ice ax and split the tip of the picking into the ice.

precautions for ice climbing safety

1. To survey the terrain before the ice climbing, check the ice quality, and choose the climbing route and time.

2. Master the weather changes.Ice quality and weather have the greatest impact on ice climbing.Ice climbing should not choose the crispy area of ice. The crispy ice is easy to break, and the ice average and icing cannot be caught.The ice layer of the good ice quality may be slightly soft, and the inner layer is harder.

3. When the ice water is not good or the situation is sinister, it is necessary to use a safety rope for protection.

4. Except for some artificially poured ice walls, ice climbing is generally selected in the deep mountain canyon. The wind in the deep mountain canyon is very large, and the wind is not conducive to ice climbing.

5. Do not excessively force when you push the ice ax into the ice surface, and do not shake the ice ax, because this will break the ice surface and affect its stability.

6. When kicking, you must force the ice to tip into the ice.The correct movement is: while lifting the feet, the knee joint is the axis, and the weight of the mountaineering shoes is used to make the feet kick forward steadily, so that the two front teeth of the ice can be tied into the ice surface.noodle.Note: Don't shake your feet up and down, otherwise it will easily break the ice surface and not firm.In addition, the feet should be straight. If you are tied into the ice on the shape of an octagonal shape, you cannot give full play to the role of ice.

7. In addition to the necessary protective measures such as seat belts, wearing a helmet must be worn during ice climbing to prevent crushing ice.

Where is the ice climbing?

1. Heilongtan, Miyun County

Suitable for beginners.Located on Shicheng Township on the west bank of Miyun Reservoir, Miyun County, Beijing.You can take the bus from Dongzhimen to Danti Cloud, and then transfer to the Black Dragon Lake of the Black Town.The slope of the ice wall is about 60-75 degrees, which is not difficult.

2. Taoyuan Xiaogu, Miyun County is suitable for competitions and professional climbing.The ice waterfall in Taoyuan Xiangu, Miyun County is very imposing. The ice surface on the mountains is more than 60 meters high, about 100 meters wide, and it is difficult to climb. It can be protected above.The ice wall on the underworld is even more difficult, and some places belong to the four Levels of difficulty.

3. Four Girls Mountain Shuangqiaogou

Shuangqiaogou can be called China's unique ice climbing resort. It is about 3800 meters above sea level.The mountain streams are flowing in the stream, and in the winter, there are more than a hundred ice waterfalls.Ice waterfalls are generally long, small, and soft in ice, suitable for leisure climbing.

4. Sichuan Hailuo Gulf Gallery

Sichuan Hailuo Glacier is the lowest glacier in the world and the longest of the 71 glaciers of Gongga Mountain.Dabing Waterfall is 500-1100 meters wide and 1080 meters high. It is the highest and most spectacular glacier waterfall found in my country so far.The glacial tongue extends into the virgin forest 6 kilometers, forming a strange landscape coexisting with the Hailu Gloss Glacier and the forest.

The Hailugou Glacier is the closest to the big city and the easiest to enter the low -altitude modern marine glacier. The transportation is very convenient. Hailuogou also has many Hot spring groups of different sizes.Among them, the Hot spring of the second camp is the most.In addition, there are the lower layers of glaciers between camps 3 and No. 4. Due to the dissolution of glaciers, many ice cracks occur, and ice climbing enthusiasts should pay attention to safety.

1. Can a suspension at home?

The Hammock is a casual bed. It is usually used during Outdoor Camping. Some friends like to sleep on the Hammock. I want to install a Hammock at home. So can I install a suspension at home?

Generally speaking, the Hammock can be installed in the home space. When it does not hinder daily life, install a suspension at home. The best installation location is recommended to the balcony, the window of the living room, the corner of the bedroom, etc., and it looks like it looks like.Beauty will not occupy too much space for daily activities.

However, it should be noted that the mount at home is not recommended to be used as the main bed in the room. After all, the comfort of the suspension is not as good as the traditional bed Mattress, especially when it takes a long time to sleep.

2. What should I pay attention to when the suspension is installed in the room

Pay attention to the factors that are installed indoors in the interior, especially security, especially safety, so as not to cause trouble. Installing a Hammock in the room, the following three aspects cannot be ignored:

1. Type selection of hammocks

There are a variety of Hanging beds such as solid wood hammocks, rattan camplars, and fabric hammocks. If the space in the home is relatively large, you can choose to install a solid wood suspension indoors. If you want to be romantic, and the space is relatively small, you can principically edit the camisole.Putting on a sunny balcony, it is also very pleasant to lie on the balcony. For fabric hammocks, because of its flexibility, we can install it outdoors or even take it out of the outing.

2. Selection of the location of the Hammock

After all, the main component of the Hammock is used to romantic, so choosing a balcony when installing is the best place, because the area of the balcony is more suitable for installing the Hammock. At the same time, it is better to install the suspension here as a place that can be exposed to the sun every day.If you have friends who like to install a Hammock in the living room and bedroom, it is recommended to install the Hammock in the corner, so as to save space, so as not to waste the use of other places because of a suspension, and pay attention to selecting a smaller suspension as much as possible.

3. precautions for suspension installation

Installing a suspension is usually drilled on the wall. When drilling, be careful not to hit the brick seam, so it is easy to fall off.In addition, the requirements of the wall drilling of different materials are also different. For example, solid bricks are safer, and special tools can be installed directly to hang the Hammock, but if it is hollow brick, you need to get rid of the hole after drilling the hole.Treatment with concrete, otherwise it may cause the suspension to be unstable.

[barbecue frame] How much does the grill size and material barbecue rack make a barbecue rack?

I believe that like barbecue friends must not be less. Three or five friends gather together to eat barbecue, talk about the sky, and drink wine.When it comes to barbecue, some delicious mouths will not help but think of its deliciousness. How can delicious barbecue less have a suitable barbecue rack?At present, the style, types, materials, functions, specifications, etc. on the market are different, so that the price of barbecue racks is far from the price. How much is a barbecue rack?What are the size of the barbecue rack?How to make barbecue racks?Let's get to know the price, size and practices of barbecue racks with Xiaobian.

barbecue frame size and material

The more common barbecue racks are generally: 80cm in length, 80cm high, and 25cm wide.Proper choices can be carried out according to the size of the barbecue rack.

Common barbecue frames include stainless steel and enamel. During use, it has the characteristics of wear -resistant, burning, corrosion resistance, not easy to rust, simple cleaning, hygiene and non -toxic.It is best not to choose iron Skin in the selection of barbecue rack materials. The barbecue rack material material is not only easy to rust, but also problems such as short service life, insufficient material hardness, and very troublesome cleaning.

How much is a barbecue rack?

With the continuous improvement of the technical level, the style design of the barbecue rack is more novel and stylish, and the functional use is more convenient.Some barbecue racks get more ideal barbecue temperature according to the need to rotate the wind door. The more common types of barbecue racks on the market are: apple furnaces, rectangular furnaces, lightweight furnaces, etc.The apple furnace is clever, with a large capacity, with wheels and handles, which is convenient for the location transformation during the barbecue process.The horizontal surface of the rectangular barbecue rack can accommodate several people at the same time. According to the different styles of barbecue frame, the price of barbecue racks is also different. So how much is a barbecue rack?Common barbecue racks are generally between: 80-120 yuan.

How to make barbecue racks?

Step 1: Preparation Tool

Before making barbecue racks, we must prepare the materials first so that we will not encounter unnecessary trouble during the production.First of all, you need to prepare an empty barrel. Of course, it is a food -grade empty barrel, because this empty barrel does not have an exciting industrial flavor like oil barrels. This empty barrel is suitable for barbecue and can choose honey barrels, which is more suitable for use.Then you need to prepare a chainsaw, several hinges, 6 pipes, several nails, and a hammer.

Step 2: Cut the bucket

After cleaning the empty barrel, cut a large mouth with a chainsaw on the empty barrel (one -third of the three -third side), and then tighten the cut side and use the hinge to use it to make the lid of the barbecue rack.

Step 3: Production bracket

We can use six pipelines, two of which are used to support the barrel, and the remaining four pipes are used as barbecue brackets.When we make barbecue racks, we should fully consider the mobility of barbecue racks. This can avoid the trouble of shaking the shelf in the process of barbecue food. This will not only occur, but also make our Camping happy mood.

Step 4: Make a barbecue grid

There are too many materials required to make barbecue mesh, and the production process is too complicated. Therefore, it is recommended to use stainless steel products to go to the hardware store. This product is not only more environmentally friendly, but also cleaner than the price.Below the mesh shelf is the place where the charcoal block is placed. At this time, you also need to leave a mesh shelf to the charcoal block in a lower position in the barrel.

Step 5: Production handle

The oil barbecue grilling rack needs a handle to provide a flip. Of course, this handle needs to use no heat transfer items, such as a wooden stick to avoid burn.Bunny recommends that you apply a layer of high -temperature paint on the surface of the barrel when making a barbecue rack. This can not only play a decorative role, but also protect the use of barbecue racks.