1. Does Fishing sunscreen really sunscreen?

Fishing sunscreen can sunscreen.

Ordinary clothes have the sunscreen effect and sunscreen capacity.Ordinary summer clothes are pursuing light and cool, and these light and light clothing cannot protect Outdoor workers as a whole.

The qualified sunscreen is more resistant to ultraviolet resistance through the material and texture density. The anti -ultraviolet performance of polyester fibers in the fabric is well done. The second is Mianlun.The tight sunscreen, the better.

2. Do you need to wear clothes in Fishing sunscreen?

fishing sunscreen clothes should be dressed in clothes.Because sunscreens are generally thin and thin, they must wear clothes.

sunscreen clothing is generally three types:

1. One is colorful cotton fabric clothes. Blue, red, blue, and green are the largest isolation rates for ultraviolet rays.

2. The second is sunscreen fabric. The production principle of this kind of production is very simple. In fact, the sunscreen auxiliary agent is added to the fabric.More.

3. The third is special fabric clothes, such as silver reflective materials.The main function of sunscreen is to prevent the direct exposure of the sun's ultraviolet rays. The effect of sunscreen is the same as the Parasol, making the Skin from being darkened with the sun.

The biggest feature of sunscreen clothes is translucent. It is cool and sunscreen, so fishing sunscreens need to wear clothes.

1. What is a soft shell jacket

Adding waterproof layer on the warm and windproof fabric is a transition clothing between the fleece and jacket, which is suitable for spring and summer communication and autumn and winter communication.soft shell jacket, light weight is easy to carry.The soft shell is softer than the hard shell, and the windproof is equivalent to the hard shell.waterproof is worse than hard shell.The weight is a lot lighter than the hard shell.If the soft shell is selected in the daily environment, the hard shell is considered in the unknown environment.

2. How to clean the soft shell charge jacket

1. Selection of cleaning solution

Try not to use laundry powder or alkaline washing supplies when cleaning the jacket. Because the material of the jacket is slightly different from other clothes, try to use the neutral washing solution as much as possible to avoid the color and windproof of the clothes and windproof functions.EssenceIf we judge that it is not good, we can replace it with bath liquids. Simply put, these are neutral.

2. The time to bubble should not be too long, otherwise it will easily destroy the color of the clothes

First put the clothes in warm water with a washing fluid, soak in 5 minutes, then grab it for a few minutes, and then rub the collar of the Sleeve.

3. Try to wash as much as possible

Because the fabrics of the soft shell jacket are composite or fit, excessive tear or strong water pressure of the washing machine may cause basic separation, and the fabric causes irreversible damage.

4. Wipe small dirt

If there are some small dirt wiped with soapy water with towels, the soft shell jacket often needs to be washed for a long time.Soak the neutral laundry powder for about 20 minutes. Use it in dirty places (the soft shell is not recommended to use a brush to avoid rough surface fiber) sponges to wipe it clean. After cleaning, do not twist and dry it with a hanger.

3. Buy attention

1. Each soft shell jacket must be completely waterproof. At all seams, you must use thermal pressure strip to prevent leakage of the needle eye. Carefully see if the rubber bar in the clothes is flat and there is a foam.This is very important for the waterproof performance of clothing.

2. There are many charge pants in the binding of two or several rubber strips. One more dot pressure gel will be added to prevent the use of glue strips from raising for a long time.This process is used on high -end three -layer gel jacket pants.

3. The main zipper of the jacket is either waterproof zipper or use placket to prevent rainwater from penetrating.If it is a normal zipper and a placket, pay attention to whether there is a backfolding side at the placket. This design allows the rain to flow down the folding edge without penetrating into the zipper.

4. Whether the hat can cover the wind and rain well, and whether the activity of the back head is free.If you use activities such as ice climbing and snow mountain climbing, you must also consider the activities after wearing a helmet.

5. Whether the tightening method of the soft shell jacket cuffs is appropriate.

6. Whether the hem of the soft shell jacket or waist has a windproof skirt. If there is no windproof skirt, there is no drawing rope to tighten the clothes to prevent the snow from being poured into the body from the hem in a harsh environment.

Disclaimer: The above method stems from the index of the program system or the sharing of netizens. It is for your reference only and does not represent the research perspective of this website. It proves that it is valid. Please pay attention to the authenticity and authority of the source of the content of the content.Apply to delete & gt; & gt; error correction & gt; & gt;

1. What is the electronic fishing rod

The electronic fishing rod is a Tool for applying new electronic technology to fishing on fish rods. The purpose is to reduce the labor intensity of fishing, improve the reliability and efficiency of fishing, and fish for more technologies and poor physical strength.In addition, the size is small, light weight, about 1 to 2 kg.Easy to carry and simple operation.

Electronic fishing rod is an emerging fishing equipment in recent years. It is a fishing equipment that integrates sensors, controllers, monitors and power supply.By installing sensors in the fishing rod Sleeve and the bottom of the rod, the degree of bending of the fishing rod, the stress condition of the hook, and the speed of the tremor are detected, and these signals are transmitted to the display to facilitate the observation of the fishermen.When the fish bite the hook, this fishing rod can lock the fish wire by the built -in locking device, allowing the fisherman to control the fish's movement more conveniently.The advantage of the electronic fishing rod is that the degree of intelligence is high, which can display the motion of fish in real time, and help fishermen to better grasp the timing of fishing.

What is the principle of electronic fishing rod

The electronic fishing rod is transmitted to the receiver through the sensor installed on the fishing rod in real time, including the bending degree and vibration frequency of the fishing rod, including the bending degree and vibration frequency of the fishing rod.Alert device.The principle of electronic Fishing rods is basically the same as that of ordinary traditional Fishing rods, but high -tech devices such as electronic sensors are added to the traditional basis.

One of the obvious advantages of an electronic fishing rod is to improve the fishing efficiency of fishermen.Because the electronic fishing rod can capture the fish that is biting the hook, the fisherman can get a faster response, so that more opportunities to capture the fish.In addition, electronic Fishing rods do not need much fishing technology and experience, even beginners can use it proficiently.

How to use a sight to aim

1. Visual differences return to zero

Newly bought new sights need to complete an important task before use: to zero the vision of the scope to reduce the shooting error and improve the accuracy.

2. school sight

Select the target target 10 meters away, aim at the target heart, take 5 rounds as a set of shooting, and adjust the knob according to the position of the bounce.For example: the bouncing point is distributed at the bottom right of the target heart, adjustable air biased knitting knobs, rotating the knob along the direction of L, so that the bounce point moves to the left in the horizontal direction, until the bounce point is basically directly below the target heart;Rotate the knob along the U direction, so that the bounce point moves slowly upward in the vertical direction until it basically coincides with the target heart.

The method of debugging of the scope

1. Set a white paper target, order a black spot at the target heart, hit the centers centered on the black spots, and then retreat to one hundred meters to set up a gun to fix the table, install the sight on the gun.

2. Remove the bolt, aim at the black spot on the white paper target from the barrel through the refractive mirror, and then hold the gun body, then press the cross from the sight of the sight to the black spots on the white paper target. Tighten it tightened.Aiming at the mirror adjustment knob.

3. The guns do not move in a fixed state, install a bullet with a bullet, and start!

4. Check the bomb point. If you are too upper, you can fine -tune the sight of the sight. If you are partial, fine -tuning, and the left to the left, and the right is fine -tuned to the right.

5. Take another shot and look at it again. Repeat this method until the bounce point is hitting the black spots on the cross on the white paper target, and the sight will be adjusted.

The debugging skills of the scope

1. When aiming, pay attention to the distance of the pupil, that is, the distance between the eyes and the sight, and the pupil distance has two effects. One is to avoid damage caused by the rear power to the human eye when shooting.The person's eyes can get the largest imaging area at the distance of the pupil.

2. When aiming, the human eyeball must be the same as the axis of light aiming, otherwise there will be vision.Aiming errors.On time, the surrounding shadow areas are uniform ring -shaped. The performance of the vision is that the shadow areas around the imaging area are uneven. Once the crescent area appears, the projectile will be biased towards the larger part of the crescent area.

3. There are two buttons in the middle of the sight. There are protective caps on these two buttons. After you spin the lid separately, you can see these two buttons.The button in the middle is increased.For example: there is a UP, one is down, and the direction of the UP will be automatically corrected upward.If you turn in the direction of down, the original bounce point will be automatically corrected downward.UP means upward in English, down means downward.The bounce point is biased down, and the direction of the UP indicator is turned. If the hit is high, follow the direction of writing down.In the knob on the side, the above is written by L, and one is written by R. If you turn along the direction of L, move the point to the left. If you turn in the direction of R, the bounce point will move to the right.L and R are capital of the first letters in English left and right, respectively.

4. Aiming a look at 1/4 inches at the British 100 yards (equivalent to 91 meters).The discounted public system is 6.35 mm.If there are about 30 mm (3 cm) in the horizontal direction of the bounce point and the target heart. If a grid at 91 meters is 6.35 mm.Then the actual movement volume of a grid at 10 meters, a look at the grid, is equivalent to 1/4 inches at the British -made 100 yards (equivalent to 91 meters).The discounted public system is 6.35 mm.There are about 30 mm in the horizontal bomb and target heart. If a grid at 91 meters is 6.35 mm.Then the actual amount of movement at 10 meters is to remove 9.35 with 9.35.Finally, about 0.7 mm.The adjustment amount is 30 mm.With 30 divisions of 0.7, it has to be screwed about 43 blocks.If it is a 30 -meter adjustment of one grid, it is 2.16 mm. If 30 meters 30 mm, it is 13.8 that is to twle out 14 grids.

1. What are the main components of the diving propeller?

Whether you want to spy on the mysterious scene of the underwater world or just like the excitement of diving. In short, you have to swim. With this premise, you can successfully follow the following things.What about the dry duck?Is there any way to make people who do not swim, can I see the mysterious underwater world and get in touch with the creatures living in the ocean?The answer is the diving propeller.

The diving pusher is usually composed of pumps, pushers, and handles.

The pump is responsible for drawing water from the water source to the pusher, and the propeller will launch the water from the propeller to form the water flow. The handle is to let the diver grasp and use the left and right tilt to change the direction of controlling the underwater forward.

What are the functions of diving propeller?

The previous article has briefly understood what the diving propeller is mainly composed of, and then let's take a look at the function of the specific diving propeller!

1. Provide power function

Can provide sufficient thrust so that divers or submersibles can move or move underwater.

2. Maintain stable water flow function

It can provide stable water flow in the underwater environment so that the divers or submersibles can move or operate more secure and stable.

3. lighting function

The diving pusher can also provide certain underwater lighting, enabling the divers or submersibles to operate in a dark environment.

4, extra function

At present, some diving pushers have begun to become more and more intelligent, and have many advanced functions, such as one -click return, one -click floating, mechanical floating, fully automatic floating, etc.