1. The breeding method of Xitanghua

1. Soil

The soil requirements are not strict. As long as the texture is loose, nutritious, drainage, breathable, pH value is even better.Be careful not to use alkaline soil.

2. Breeding

The large -scale cultivation method of the nursery can be sowed, and the heavy -petal varieties can be divided into or cuttings.Cuttings should be cut with hard branches in early April, and cuttings can also be cut in the rainy season in July-August. Cut the green branches and insert it into bed.Pot.

3. Light

is a environment with sufficient light. If the growth environment is too shade, it is easy to lead to poor growth in the growth of Xi Tanghua, and the branches and flowers will become thinner and small.

4, temperature

Xi Tanghua prefers a warm environment, but in the summer, the light is very strong and the temperature is very high, so you must find a way to cover it, otherwise it can easily lead to burning the leaves of Xitanghua, generally 18-25 degrees Celsius.In the middle is the most suitable for the growth of Xi Tang.

5. Water

There is no too much demand for water, and there is no need to water.Guarantee the soil in the potDon't dry.However, the temperature in summer is high and the amount of evaporation is large, which can increase the amount of watering appropriately to prevent too dry.

Second, the main points of maintenance of

1. Watering does not require too much water, and there is no need to water.Make sure that the pot is not dry.However, the temperature in summer is high and the amount of evaporation is large, which can increase the amount of watering appropriately to prevent too dry.

2. Fertilize the seasons and growth status, and apply thin liquid Fertilizer in the afternoon.Once the Fertilizer is too much, it is necessary to pour some water to dilute, so that the Fertilizer is discharged with flowing water.

3. Pruning the Tattoo branches is dense. Every 2-3 years of dormancy, 3-4 years of old branches should be removed and new branches are promoted.The residual flower branches after the flower should be cut off in time. After the winter, the disability, the diseased and insect branches, and the weak branches should be cut in time to ensure that the position of the plant is well -proportioned and beautiful.

4. The time for changing the pot to the pot is generally changed to the basin, it is best to be in spring or autumn.If you grow faster, you can change it once a year. If it is relatively cold, you can change it every three years.

Third, the problem that Ji Tanghua may have

1. Disease

The main occurrence of "yellow leaf disease".It will cause tender leaves to become yellow, and the entire leaves will eventually fall.Sulfuric acid iron sulfur solution can be poured, three to four consecutive times.In addition, you can also supplement some other Fertilizers.There are also "brown spot disease", from July to September, it can be cleaned with bacteria.

2. insect pest

There are fewer pests. Occasionally, the harm of "red spiders" and "scripts" can be sprayed.

Method of succulent plant seeds

Succulent plants refer to a type of plant that appears thick and juicy in appearance; there are more than 10,000 Succulent plants in the world, and they belong to more than 100 families in plant classification.

It is not difficult to plant methods, but it cannot be ignored, and it is not necessary to plant it blindly. Before planting, you can go online to see Baidu experience. Let s share with you with my planting experience:

1Prepare a variety of meat plants for the Flower pots, first pour the soil water through the water:

If you do nt buy a dedicated soil, it is also good to match the soil by yourself (but if you want to disinfect the soil, you can use a disinfection agent to prevent plant rotting)!

It is best to use the soft peat soil (with a certain water reservation ability), because the peat soil is soft, which is very conducive to rooting;

As far as I know, the more reasonable soil method is: peat soil60%sand20%Granules20%If you can't find the river sand, you can also replace it with particles; the particles can be pottery grains, stones, etc.

2Sprinkle the seeds evenly on the surface of the soilThe

If the soil is soft, the seed surface does not need to be sprinkled on the soil. On the contrary, it is also possible to sprinkle a thin layer of soil, but it is also possible to sprinkle too much so that the seeds are not buried too deep and will not germinate!

Also note: Use the bottom of the Flower pot with a hole in the bottom!

3Follow the plastic wrap1-2Zhou, put in20Available indoor ventilation!

If the local temperature is20Around , soil is sprinkled on the surface of the seeds, but no need to protect the plastic wrap and keep the soil soft and humid (watering for a week2-3There is no regulation in the second time, just keep the soil wet)!

If the temperature is cold, be sure to put on a plastic wrap (if possible, it is best to open it at noon. This cultivated plant is full and bright in body.)!

4,wait1-2Zhou can see the super cute bud:

At this time, the plastic wrap can be lifted off, and the appropriate amount can be kept light. The succulent people like the sun very much. There is a certain amount of light.Many novices have Succulent plants because they are too frequent.

Summarize:

Three points are inseparable from breeding plants: moisture, medium, and light.The succulent is no exception.Light is an important factor that affects the growth of plant growth, but moisture and medium are the factors that directly affect the life and death of Succulent plants.If you also have a breeding or intended to cultivate succulent, let's learn the meat together.

How long does the succulent plant seeds germinate?

1Scenic: Jingtian is actually germinated, not very slow, the temperature and water are suitable.3 ~ 7The sky is almost the same. If you dont post it, it is recommended to have a difference. Be careful not to freeze the freezing.~There are individual varieties to be slower, especially the seeds collected at home, and the germination is slow.Jingtian Miao is also the easiest to be apprentice. It needs to be controlled. For lazy people, I personally think that it can be started from the soil. Do not use too much water.~For example, I used pure vermiculite for the first time.In addition, open the cover in time.

2, Raw stone flowers:PPIt is relatively easy to germinate. The seedlings are not easy to raise, but I personally feel that the seeds collected at home are slower, but it seems that the growth is good after germination. It may be related to mixed.~ ppWhen I was young, I was afraid of dryness and wetness. I was afraid of wetness. Pay more attention to controlling water. In addition, do nt dry it. The scenery feels like it. Of course, it must be moderate.PPIt is not easy to move the seedlings and it is not easy to live, so it is recommended to match the soil at the beginning. The pot is selected.PPIt is very small and not fast, so it can be moved for a long and long time, so it is recommended to on -demand and use toothpick.After the small seedlings are much taller, you can sprinkle some deer marsh on the face and fix it.Silver needle: I dont have too much Tube, which is relatively skinny, I feel that Xiao Miao is afraid of big water~The germination is also fast, surpassing Jingtianwa~It is easy to turn it when the water is big.

3Fanxing: This is also easy to live, and there is nothing special about it. I also need to move less seedlings. I have shifted the seedlings because of the first all -vermary stone. A large number of seedlings have been moved.Move again, resulting in a reduction in survival rate.

4Talking about the genus Wawei, this experience is not a lot of experience. There are ten thousand elephants sowned.7A jade fan brocade,7A jade fan, the seed is expensive!IntersectionThe first broadcast4Try a Vientiane, come out3The problem is that the soil is covered. In fact, I don't think I need to cover the soil. Later, I did not cover the soil. I was very relieved.The main reason is to be stuffy. I personally think that the water is sufficient.2point,1I'm afraid of light,2The seeds need enough water.I did not cover the soil later, and the lid was stuffed.This genus is slow,7 ~20sky.

Potted flowers Six methods

1. The residual tea is used to pour the flowers, which can keep the soil water and add nitrogen and other nutrients to the plants.However, the humidity of the flower basin should be poured in a regular basis without pouring it with the dumping tea.

2. After the deterioration milk is poured with milk, add water to pour the flowers, which is beneficial to the growth of flowers.But more water is used to make it easier to dilute.Unblocked milk should not be poured flowers, because it generates a lot of calories during fermentation, it will "burn" the root (rotten roots).

3. Pour the flowers with cold water and pour the flowers with cold water, which can make flowers and trees flowing flowers and flowers, and can promote early flowering.If it is used to pour the bamboo, it can make its branches and leaves develop horizontally, and the dwarf is dense.

4. Pour the flowers in warm water in winter and cold water. It is advisable to pour flowers with warm water.It is best to place the water in the room, and then pour it when it is similar to the temperature of the room.It is better if the water temperature can be poured when the water temperature is 35 C.

5. Put the flowers in rice water often use rice water to pour rice orlan and other flowers, which can make their branches lush and bright.

6. When there is no one in the family, people who love flowers and flowers and flowers are not at home for ten days and a half months for visiting relatives or going out. No one is poured.At this time, a plastic bag can be filled with water, pierced a small hole with a needle on the bottom of the bag, placed in a Flower pot, and the small holes are stuck to the soil, and the water will slowly leak out the wet soil.The size of the hole should be mastered so as to avoid water leakage too fast.Or put a ware full of cold water next to the Flower pot, find a wide cloth strip with better water absorption, put one end in the water water, and the other end into the Flower pot soil.Wet, the flowers do not die.

Five methods for fertilizing Potted flowers

1. Sprinkle a layer of Wheat rice granules in the Flower pot, which can promote the growth of flowers and extend the flowering period.

2. Burning eggshell Fertilizer is crushed into the Flower pot. It is a good Fertilizer, which can make the pots grow lush and the leaves are gorgeous.

3. Cooked a small amount of soybeans to be used.Wear three points for each pot of flowers and put 3-5 cooked soybeans, depth and 2-3 cm, without hurting the root of the flower, and covering the soil as usual.

4. Broke the pork bones, fish bones, etc. prepared for abandoned, and apply the bottom or basin surface of the pot.

5. Pour flowers with rice washing water.Trace elements such as nitrogen, phosphorus, and potassium in rice washing are mild Fertilizers and mild Fertilizers. It does not hurt the root of the flower.

How to prevent and control the Potted flowers

Termites and ants are very harmful to pot flowers. It is not only dry, but also destroys the root system of the plants, causing the plant to weaken the ability to absorb and transmit the plant in nutrition, water, and eventually leads to the poor potential, withered and even death of the plant.Now introduce several methods for preventing ant -harm.

Eliminate

Pen flower should be far away from the ant hole.If you find that there are ants in the pot soil, first follow the ant's crawling route to find the ant nest, and use water flooding, fire burning, spraying drugs and other methods to eliminate it.Sprinkle some lime on the crawling route of ant nests and ants to prevent the ant from harm again.

Physical control

1. When applying rotten Fertilizer to apply base Fertilizer or Organic fertilizer, it is necessary to use the Organic fertilizer that is fully fermented and rotten. Do not use raw or semi -cooked Fertilizer to avoid causing ants for ants.

2. Washing the excreta of insects such as flies, moths, aphids, mites and other insects on the leaves of the leaf surface can easily seduce ants to find food. Therefore, it is necessary to spray the leaves with water to keep it clean.At the same time, clean the ground and keep the pots of Potted flowers clean and hygienic, so as not to attract ants with odor.

3. Put the potted pots that are harmed by ants, and slowly put them in a barrel with water (the water can be flooded through the pot soil) for 30 to 60 minutes.The ants can't stand the flooding of the water, and they will crawl out of the pot soil. At this time, the ants that float on the water and crawl on the pot of the pot of the pot can be removed.

4. The garlic is peeled with garlic and smashed. These debris are buried into the pot soil.

5. The most effective way to remove the pots that have built nests at the root is to turn the pot in the pool and destroy all the ants.Then clean the roots of the plant and plant pot flowers with new pots of sterilization.

Chemical prevention

1. Before the potting of potting soil, before the upper or over the basin, the pot soil is disinfected with 40%Forma, 65%Daisen zinc powder, and 50%multi -bacterial pink powder, etc., killing the termite in the pot soil, and the termites in the pot soilAnt and its eggs.

2. Burted the soil with 50%of the enemy's wettable powder and the fine soil with 50 sieves and mix well to make the medicine soil, and then bury the medicine soil into the pot soil to eliminate the ants.

3. Plutiny solution should not be turned over the basin, the effect of buried soil is not obvious and severely damaged, or the ants that have built nests in the pot soil.Under 1000 grams, or mix 40%of the pistachio emulsion with 1000 grams of water, 5 to 10 grams of pyramids, pour the medicinal solution into the pot soil and ants, and then seal the entire Flower pot with a plastic bag for 12 hours.Kill all the ants.

1. Why does the Flower pot soil knot

1. Long -term excess watering

The root cause of the Flower pot soil plate is the loss of fertility. Most of them are because we usually use water to pour flowers, which will gradually lose fertility from the bottom of the pot.

2. Excessive hard water pouring flowers

"Hard water" is water containing more soluble calcium and magnesium compounds, such as tap water.The compounds that are insoluble in the hard water gathered in the pot soil to make the pot soil stiff and the plate.

3. Improper fertilization

For long -term single application of chemical Fertilizers, the humus cannot be supplemented in a timely manner, which will cause soil knots.For soils containing more calcium, ammonium sulfate can also make pot soil.

4. Disdo the small stove

Listening to the rumors of the workshop, unpreceded protein flowers such as fresh rice water, overnight tea, egg white, soy milk, milk, etc. The plants cannot be absorbed, and the soil plate will be knotted.

5. Long -term severe drought

Looking at the cracks of the drought northwest, you should be able to understand.However, the Flower pots in the flower raising people should have less such situations.

2. What should I do if the soil board in the Flower pot is over

1,When the Flower pot soil is knotted, a little sand can be mixed with a little sand, or a porous structural substance such as cooler and perlite can be mixed.The problem of the board.

2. When watering, adjust the method of watering, grasp the frequency and time of watering, and water in a small amount.During the rainstorm, if it is a potted soil, it needs to be moved to the place where it cannot be drizzled indoors to avoid the heavy rain washed. Otherwise, under the scouring of rainwater, the hair pores in the soil will be blocked, the surface of the soil surface is skinned, the soil will cause the soil, causing the soilharden.

3. For long -term Fertilizer during the fertilization process, it is also an important cause of the soil end of the Flower pot. It will continue to decrease the organic matter content in the soil, destroy the structure of the soil group particles, affect the activity of microorganisms, cause soil plate knots, and cracks.You can apply less Fertilizer and apply farmhouse Fertilizer to improve the soil. You also need to apply more microbial bacteria to achieve the best growth soil environment.

4. You can use tools to flip hard to cultivate the soil, loosen soil, keep the soil transparency, and avoid excessive soil.

5. If there are not many soil in the Flower pot, you can use the power of earthworms to put a few earthworms in the soil. Earthworms walk through the soil, and can excrete earthworm manure.

3. How to prevent the tie of the Flower pot soil

Whether it is a new soil or the old soil that has been transformed after the plate, if you do nt pay attention to the daily flowers, the soil will still be knotted again, so the prevention board knot is very important.

1. Qin pine soil, maintain the breathability of the pot soil.Pour the flowers less and slowly pour water, refuse to water the water, and water the water; appropriate fertilization according to the plants' acid and alkali of the soil.

2. Use fresh tap water to pour flowers. Fresh tap water is not only hard water, but also the substance that is not beneficial to the plant with bleaching powder.Rainwater, river water, river water, freshwater lake water and other natural soft water is better to pour flowers, but it is not easy to obtain.

3. When the plant is pelvis or change the pot, insert a few hollow pipes in the empty pot. The Flower pots fill the soil normally.When pouring flowers, water is only injected at the sand column, and the moisture can spread evenly in the Flower pot through the sand column.This method can avoid the end of the soil, and there is no side effects on plant growth.

4. Add a Flower pot bottom pad to each Flower pot. Pour the water directly on the bottom pad when pouring the flower to make the water moist soil through the bottom of the basin, which is beneficial to the root system and has a certain effect on preventing soil plate knots.This method is better to use with ordinary watering methods.

1. Method of duck palm wood

1. Light: Duck palm wood should accept 4 to 5 light hours a day, and indoor maintenance is placed in places with scattered light or semi -yin.It cannot be in an environment with too strong light for a long time, and scorching spots will appear on the leaves, and even the leaves will become yellow.In winter, it can be maintained at all sun.If you grow in an too cool environment, the leaves will become yellow.

2. Soil: Duck palm wood cannot grow in the alkaline soil that is sticky. I like loose, breathable, fertile micro -acid sandy soil. The method of soil can be mixed with 5 pieces of peat soil and 3 parts of rotten soil.A small amount of cake Fertilizer is added as base Fertilizer.

3. Fertilizer: Duck palm wood Fertilizer is mainly in the growth period of April to September. It is applied to thin Fertilizer once a month. Fertilizers choose Compound fertilizer or cake Fertilizer of nitrogen, phosphorus, potassium.However, it cannot be used too much, which will cause the spots of flower and leaf duck to disappear green; during the dormant period, it must be stopped, otherwise the root system cannot absorb Fertilizer and cause damage and affect the healthy development of the plant.

4. Watering: Duck palm wood is moist and drought, so it is better to raise.When the soil is found to be dry, you need to water the water immediately, so be careful not to water too much.spring and autumn, water 1 or 2 times a week.It is hot in summer, and it is usually poured once a day to keep the soil slightly wet.winter grows slowly, poured water once every 5 to 7 days.Spray the water fog on the leaves regularly to increase the air humidity and make the leaves green and bright.

5. Pruning: Duck palm wood during the seedling stage can be trimmed off as long as the dense branches and leaves and the cluttered branches and leaves are trimmed; pruning during the germination period in spring, the main topics are carried out.Inhibit the height of the plant type, and promote the germination of the new buds of the side branches; according to the growth of the plant, the dense and cluttered branches and leaves will be cut in time to avoid affecting photosynthesis and breathing growth.

2. precautions for breeding of duck palm wood

1. When the summer light is too strong, it is necessary to keep it in a ventilated and cool place to avoid strong light exposure.

2. During the winter maintenance, the temperature is controlled in an environment with above 5 C.If the temperature is lower than 0 C, frostbite will occur.

3. Pay attention to opening the window frequently to keep the indoor air circulation, which is conducive to the strong growth of the plant, and it can also avoid the occurrence of pests and insect pests.

Third, cuttings of duck palm wood

1. It is recommended that you choose the two -year -old duck palm wood, choose a strong growing branch for cuttings, first cut it with scissors, and keep the obtained branches at the top leaves.

2. DuckPalmPut the wooden strip in the plastic bottle loaded with water for soaking. Pay attention to soaking in a cool vent and ventilated place. You can also put a little root powder in the plastic bottle, which helps take root as soon as possible.

3. After more than a month of soaking, the duckPalmWood usually takes root. At this time, you can carefully plant the branches of germination of germination into the Flower pot. After a while, the duckPalmMu will grow new leaves, which means that the cuttings are successful.

Fourth, the cuttings of duck palm wood are more appropriate

When the duck palm wood is cutting and breeding, it is best to keep the temperature at 15-25 C, so cuttings are best in spring in spring, and the south can be carried out in April.Cutting should avoid cool summer and severe winter. These two extreme seasons are not suitable for the growth of branches.When cutting, pay attention that the matrix should be clean enough, and there must be no eggs in it.