Articles in Tags plant flowers gardening

1. Method of Niuxianggui Breeding Method

1. Soil sour

Sun Xianggui is suitable for growing a little bit of acidic soil.The fertileness of rotten soil and peat soil is very suitable.You can also be mixed with perlite or fine sand.

2. Watering in moderation

Ri Xiang Gui watering should be moderate, and the soil is the best in a slightly humid state.spring and autumn, watering once every 2 to 3 days, watering once every 1 to 2 days in summer, and watering in winter once every 3 to 4 days.Especially when the root water is just planted, the first time I need itWater, then watering a small amount.Excessive or wetting can affect the growth of the plant.

3. Passionate light

The sun incense and Guiyang must be more common in order to make it grow more vigorously, and the fragrance will be stronger.The temperature control is best at 15-30 C. When the temperature is low in winter, it must be taken to keep warm to make it flowers.

4. Keep humidity

Sun Xianggui also likes a gentle growth environment. The humidity should be kept about 80%. It is dry in summer and autumn. In order to keep the humidity, you need to spray water and watering at the leaves.winter is very cold, do not spray water, so as not to cause the root of the sun in the sun in the pyramid.

Second, Niuxianggui's breeding precautions

1. Timely trimming

Sun Xianggui must be trimmed in time. Their growth period is very long. The long branches and leaves, the weakness and the yellow branches and leaves must be cut in time.In this way, the nutrition of the plant can be fully guaranteed.And in the just -planted Rimi Gui, you must cut some tender branches. After the tender shoots are germinated, you should also cut it in time.

2. Diligence and thin fat

Sunframe osmanthus period is too long, so it needs enough nutrients to ensure its nutrition.Phosphorus and Potassium fertilizer is the most suitable Fertilizer for Japanese cinnamon. It can provide sufficient nutrients in Nikko Cinnaba to keep the flowers continuously.The Fertilizer is the most suitable for Fertilizer in August in autumn. The average is 10 to 20 days on average. It is best to apply Fertilizer once a flowering period.

3. Change the basin every year

Ri Xianggui needs to change the pots every year, otherwise the long -term flowering will cause the soil to miss the nutrition.It is best to change pots from 2 to March each spring, and autumn is the best in September to October.Be sure to keep a part of the original soil, add new Nutritional soil, then pour water, and then let it grow normally.

Third, the diseased and insect protection

1. The most common pests in Nikkei are leaf blight and anthracnose.Both of these diseases can be removed with bacteria.In addition to the multi -bacterial clearing, the Tapin Pinotrane 800 can also be sick after being diluted.

2. Most of the pests are shell worms or red spiders. After 1000 times the water is diluted, spray can be sprayed to remove insects soon.

Dragon boat flower breeding method

1 , Potted soil

Dragon boat flower is an instruction plant for acidic soil, so you need to choose a slightly acidic humus loam for cultivation. 2: 1: 1 The proportion is mixed and disinfected. The soil requires loose and well drainage.

2 , Light and temperature

Dragon boat flowers are happy, but avoid strong light.In the spring and autumn seasons, it should be placed in the place where the back wind is facing the sun. In summer, it needs to be shaded. In winter, the dragon boat flowers can be fully accepted.Dragon boat flowers are warm and warm, and it must be maintained in the winter room 12-18 between.In the spring of the Qingming season, the dragon boat can be placed outdoors, and the temperature in the autumn is lower than 15 Timely put the dragon boat into the room in time.

3 , Watering and fertilization

Dragon boat flowers like to moisturize the environment, but they are afraid of accumulating water.spring and autumn seasons every seasons 3 It is best to pour water permeability once. Water in the morning and evening in the summer and evening. At the same time, in order to maintain higher humidity, the leaf surface of the dragon boat flowers should often be sprayed in summer.Dragon boat flowers are like fat, but avoid thick Fertilizer and raw Fertilizer. In the growing period, it can apply rotten Organic fertilizer every half month.

4 Pelvic change

Dragon boat flower average 2 Change the basin once a year, the best time to change the basin is 5 At the beginning of the month.Some old roots should be removed appropriately when changing the pot.

5 , Prevention and treatment of pests and insect pests

The common diseases of dragon boat flowers include leaf spots, anthracnose and coal dirt.Essence

6. Breeding

The breeding method of dragon boat flowers is best to use cuttings. This method is easy to survive, and it is quickly flowering.Cuttings should be selected every year 3 As well as 4 The month is performed, and the two -year -old and lone branches are the best. After cutting 35 The dragon boat flowers around the sky will take root, 60 After day, you can move the seedlings.

How to trim the dragon boat flower

1, Cut off the weak and dense branches before the spring sprouts, and leave the branches born of the year3 Short -cutting left and right.New buds grow up with new shoots to grow 10 A pick -up at the left and right, retain the two bud points of the base, and promote the growing branches. When the branches grow to the seven leaves, they will be picked again to promote the split split sprout and speed up it.Flowing process.

2, The inflorescence of the dragon boat flower generally grows the top of the branches. After the first flower, you need to cut off the residual flowers in time to avoid the consumption of nutrients from continuing the residual flowers. In addition, it is necessary to apply phosphorus and Potassium fertilizer to promote the flowers of the plant again.

3, The branches that have been opened in the summer and autumn of that year must be short -cut, and only the base needs to be retained. 3 Just the sprout eyes, the length of the base pile is 10 The most suitable cm is the most suitable.

precautions for dragon boat flowers breeding

1 In the rainy season in summer, pay attention to drainage in time to prevent the roots of water.

2 When breeding of dragon boat flowers, pay attention to keeping the environment ventilation. Poor ventilation is easy to grow aphids and shell worms.

3 Dragon boat flowers should pay attention to thermal insulation when wintering, which is lower than long for a long time 0 At the time, frost damage is prone to.winter winter should be kept 10 The above, and give sufficient light.

4 Pay attention to the prevention and treatment of diseased and insect pests. The common diseases of dragon boat flowers include leaf spots, anthracnose, and shell worms. It should be mainly based on prevention, maintain the environment of the environment, and use it.

1. The breeding method of Dragon Steel iron

1. Soil

Dragon Face Tie likes to penetrate and has strong ventilated sandy loam soil. It is the best acidic soil.Generally, you can choose loose, breathable, and well drainage soil.It can be prepared by 1: 1: 1: 1: 1: 1, which can effectively ensure the water permeability and breathability of the soil, which is also beneficial to the growth of the plant root system.Adding to river sand and coconut bran can prevent soil knots.

2. Watering

When watering, irrigate from the upper part of the plant to keep the soil moist and increase the humidity of the air.Each spring and autumn are important periods. Watering once every 4 days, watering every 1 to 2 days in summer, and spraying water on the leaves to keep the humidity and reduce the temperature.

3. Fertilization

The amount of fertilization of the dragon beard should not be too large, usually fertilizing once every half a month.However, please be careful not to use too thick Fertilizer or Fertilizer.Sometimes because of too thick, the roots are burned.

4. Light

Dragon must be ironed and shade -resistant, and is cultivated by the window with a strong sunlight.When the sun is particularly sufficient in summer, the sun is appropriate.At this time, it is best to be between 40%and 50%.

5. Temperature

The long temperature of the dragon beard is 18 C to 30 C. If it is Outdoor, it will be moved indoors immediately in the rainy season or autumn.Unstable temperature changes will cause the dragon's tree to die.Conservation in the north, there is heating in the winter, as far as possible as much as possible from heating, so as not to bake dry leaves.

6. Pest disease

The main seedling period of the dragon beard iron is leaf spots or anthracnose. At this time, we can use special drugs for spraying, spray it every 7 days to 10 days.Can be effectively controlled.

2. precautions for the breeding of Dragon Steel

1. Dragon beard iron indoor farming should be ventilated frequently, the yellow leaves of the dragon beard tree, and the growth is sluggish.Therefore, the indoor cultivation must pay attention to ventilation.

2. The roots of the dragon beard are developed and growing fast. Generally, it is changed to pelvis once every 2-3 years.When changing the Flower pot, pour the garden soil and change the new soil.After changing the basin, water it and move it to the cool and ventilated place for 5-7 days to apply it normally.

3. The longer the main branch of the dragon beard, the higher and the higher, and it may be long. At this time, the top will be cut off. Do not worry about damage to it, hit a top, from the incision, you will be separated from the incision.With a few branches, it seems that the plant type is more vigorous and full.

Third, the breeding method of dragon beard iron

The breeding of the dragon iron is generally cuttings and trimming. It is carried out from April to August each year and can be carried out throughout the year.

1. Pile -type cuttings: Fold the leaves directly 1/2-2/3 of the leaves by hand, insert it directly into the clean river sand, and then water it to avoid strong light temporarily.

2. The whole plant is inserted: cut the leaves for short cutting, cutting in a clean river sand and then watering.After that, the air humidity remains at about 70%, and new plants will grow after 1 month.

Miscellaneous wood bonsai type

Miscellaneous wood is all -encompassing, and it can be divided into five categories according to the ornamental nature.

1 , Observation: Strange shape, good -looking elegant and elegant pairs of sections of aslene (Hubei Jingshan Specialty), Jiulixiang, Rongshu, Chinan

2 , Observation: The leaf color is beautiful.

3 Watching flowers: flowers are overflowing, flowers and trees are peculiar, the most common and most favorite bonsai types such as plum blossoms, Ziwei, azalea, camellia, June snow, safflower beef, gardenia, and gardenia.

4 fruit: There are flowers and fruits, the fruit is good -looking or even diet.

5 , Guanjo: Graceline, entangled like gold and silver flowers, ivy, wisteria.

Making of mixed wood attached stone bonsai

1. Selection of stones

In fact, there is no special requirement for the choice of stone.If you don't have any materials on hand, you can just make a cobblestone and pave the road.It is recommended to jade rough, that is, the waste of the gambling stone; you can choose the traditional strange stone; commonly used British stones, stalactites, sandstones, turtle stones, yellow wax stones, pine stones, pine stones, Shoushan stone, etc.Stones can be legally processed by cutting, carving and cement adhesion.

Second, the choice of tree species

There is nothing to use in the tree species of miscellaneous wood bonsai, there are not many requirements.

Three or three styles

1. Tree roots holding stone: Take the old pile with a long root system and a beautiful posture. According to the characteristics and creative intentions of the selected stone, follow the texture of the stone in the stone gap, and then wrap it with a fine iron wire, fill in the stone cracks, fill in the stone seamEnter the mud, and the stone is planted together to maintain it in the deep basin.In the future, according to the growth situation, the mud is gradually cut off, the wire is removed, the iron wire is removed, the roots are revealed, and the fine roots that affect the aesthetics are trimmed, and then the excess soil is removed with water to plant it in a shallow basin.Of course, the seams on the stone can not be natural, allowing fraud to cheat.

2. The trunk embedded stones: open the surface of the stone according to the shape of the trunk, and then stuff the trunk in. After a period of time, the trunk is perfectly filled with the stone groove, and then slowly rolled on the surface. It is also very good.EssenceThe most ideal state is to make tree stones.

3. Stone planting bonsai: The stone planting bonsai should be said to be the ultimate of the stone bonsai. There is no Flower pot or soil.It is said that its production method has been lost, but it is not difficult to think about it. It is worthwhile to wear a text. When I do it next time, I will pass the process.

The stone with the stone bonsai is one side, and it is the other side of the stone. The stone is shaped according to the normal bonsai, but the shape of the stone must be considered to make the overall coordination and perfectly blend.

The biggest taboo of the attached stone bonsai is the detachment of the tree and stone. Whether it is root or a trunk, the place to be attached should be tight and cannot be suspended.

How to maintain the mixed wood bonsai

1. Daily maintenance

In simple terms, it is nothing more than frozen, winding, watering, fertilizing, insect -proof, combing branches, and adjusting light.

1. The anti -freezing problem is not prominent in the south. Most of the tree species are outdoors outdoors.It should be noted that many people like to move the bonsai back to the room to watch in winter. During the reactoring, the sun is not in the sun. For most of the plants that like the sun, the tree gas will be damaged.It is reminded that when the spring flowers are swollen outdoors, especially be careful not to move it.Adaptive exercise should be performed step by step. First, ventilate in the room first, then choose the temperature suitable for sunny days, exercise in a short time, and then move back to the room at night.In addition, the room temperature is too high and harmful. If the plant cannot be dormant or wakes up early, it also affects the tree gas.

In summer, pay attention not to store in the air -conditioned room for a long time, otherwise it is easy to cause the tree to weaken, because it is a life body.In the middle and lower reaches of the Yangtze River, it is often found that the trimmed branches have no teeth without teeth within 3-5 cm, and the covering damage is available.

2. The problem of avoidance of wind is simple, that is, when it is stored outdoors, try to store it at the sun -shelter as much as possible.Pay special attention to the changing pots in early spring. The wind is easy to cause water, and the water spraying measures for plants can be taken to slow down. However, it should be noted that the water is only sprayed on the plant, and the soil should not be too wet.

3. Watering problems, water is required during the life cycle of the plant.It is best to soak; when the Outdoor wintering cold current comes, water should be poured in advance, which is of great benefit to improving the cold ability of the plant.

4. Fertilize the problem of fertilization, grasp the principle of "thin Fertilizer, eat less meals", and those who are weak in tree qi must not be "fierce medicine". The key is to pay attention to the dilution rate of Fertilizer.It is best to use fermented organic Fertilizers to effectively reduce the potting of the pot soil.Many people have poor maintenance, Gain is too "hard work", and fertilization is too frequent.

5. Preventing diseases and insect pests, occupy an important position in maintenance.Pay special attention to oily secretions and other plants such as elm tree and other plants, which affects the photosynthetic effects and find that late consequences are unimaginable.Add the leaves when killing the leaf surface in daily pesticides, and the effect is very good.The key to medication is to prevent early. After the spring, you can spray pest.The weaker the growing plant, the weak the resistance.Fortunately, there are often less insect pests. Even if there are insect pests, they are often worms who eat leaves, which are controllable.Only the pests of the pests of the tree juice are even more terrible. If you find how much it is not timely, you need to pay more attention.

6, combing branches, the denseness of the branches affects the ventilation and light, and it is easy to die with weak branches.Plants are either leafy or healthy. The top of the crown should be taken appropriately to increase light to benefit growth.

Second, turn the pot and change the soilPlants shrinking branches is mostly caused by malnutrition. Changing the soil is an important way to improve the growth conditions of plant growth.It is also difficult to work to change the pot to work, but it is necessary.There are not many middle skills, the key is the trimming of the roots and the use of soil.There are still something else in the bonsai and cultivation in the cultivation.Miscellaneous water control is not feasible, and the Fertilizer is controlled.Some people in the formation bonsai are practicing less soil, and the custody of the pot is slowed down.I think that the soil still needs to be replaced, but the root beard can be trimmed appropriately. The life of the plant will not affect it. Of course, you cannot "just care about the whole camel, regardless of the camel's alive."In practice, fine soil can be used for molding bonsai. It should be used to use coarse granules for raising bonsai, which is more beneficial to the growth of the root system.The soil of the pot must be dry. It is best to go through the sun, otherwise the soil transmission is worse after changing the pot.Flower pots should also be washed and disinfected (dried) to reduce eggs.The trimming of the tree roots is an important part of the pot.

Third, styling

The shape of the shape is the place of bonsai art, which has always been valued.The key is to control the pruning frequency.Usually miscellaneous wood bonsai is trimmed at least twice a year.It can be cut in early summer and germinated like spring; the second time in the early autumn, it will germinate again, and the leaves born will generally not fall in winter.

1. The breeding method of fragrant flowers

1. Soil

The best sandy loam is used to use the sandy loam soil with good drainage and fertile sandy loam. Put a layer of broken bricks to the bottom of the basin to facilitate air drainage.After turning over the soil, after the flowering period, do not transplant in the flowering period, so as not to affect blooming in the coming year.

2. Fertilization

After flowering, apply nitrogen fertilizer as the main Fertilizer, and it is generally performed once a year.

3. Light

The fragrant flowers are semi -humid and half -shade. In mid -summer, you need to avoid the scorching sun. It is best to bask in the sun in winter, which means that you put the half -shade in summer and the sun should be exposed in winter.The sun is too strong, and the leaves are prone to yellow. If there is no sun, it will cost less and fragrant. Therefore, it is important to control the sun.

4, temperature

Xiangxianghua loves warmth, but it is also cold -resistant. Basically, it can survive outdoors in the south in winter, but in the north, it may be frozen to death.It is only from -10 C to -20 C in winter, and the flowering period will be postponed to March to April.

5. Watering

Watering should be used frequently during the growth season to maintain a slightly moist state. Do not water too much water, otherwise it is easy to rot.If you do not water, you will dry and fall.

two, To breed the incense flowers

1. Sub -breed: Before germination, take the thick seedlings, cut off the root of the incense flowers connected to the mother plant, and move to another planting place.The transplantation is very simple, and the vitality of fragrant flowers is very strong. It can grow from 60 cm to 70 cm in one year.

2. Cutting reproduction: Select the thicker branches, and cut it into short branches with a sharp knife from 10 cm to 15 cm. The horizontal cut surface is a slope, inserted about half of the soil, compacts, water, shade, and keep it.The soil is moist and can germinate the roots soon.The following year can be transplanted.

Third, the diseased and insect pest control of fragrant flowers

1. White silk disease, high temperature and humidity, poor ventilation is prone to this disease.

2. Viral contraction disease is mainly to harm leaves. The disease is prone to the disease. After the onset, you can spray the plant with 50%multi -bacterial spirit and 50%todbin.