How to wash down the down sleeping bag

Because the fillers in the down sleeping bag are down materials such as duck and goose feather, duck and goose down, they must pay special attention to the cleaning method when cleaning. For the uncommon fabrics such as down Sleeping bags, many dry cleaning shops cannot master its correct washing methods.Generally speaking, the down sleeping bag is cleaned once every 4-5 years. This interval can not only properly extend its service life, but also avoid the trouble of cleaning caused by too much cleaning.

During cleaning, it is divided into two types: hand washing and machine washing. When hand washing, you should choose a dedicated down detergent. After soaking in the instructions, wash it after soaking it. Do not rub it hard to avoid damage to the filling in the sleeping bag.If you choose machine washing, you must choose a dry cleaning company for a specialty washing bag. After getting the clean sleeping bag, you must lightly pat it to confirm the drying.The same method can also be used in hand washing. After washing, make sure the down sleeping bag is dry, and then gently pat it to let it show a natural fluffy state before it can be put into the storage bag.

precautions for Plel Sleeping bags cleaning

1. Please use a neutral detergent or special sleeping bag cleaning agent to clean your sleeping bag. Do not use strong cleaning agents, bleach and clothing.

2. Soak the sleeping bag before cleaning, and use a soft brush to gently brush the head, neckline, feet and other vulnerable parts to reduce cleaning work.

3. Sleeping bags can be washed with front roller washing machines, but the upper -style turbine washing machine cannot be used.Before the machine was washed, the sleeping bag was turned off, pulled all the zippers and buckled it.Select warm water and mild mode for washing machines. Do not use drying function. Strong centrifugal force will damage the fabric and lining of Sleeping bags.

4. Rinse the detergent and soap foam thoroughly.

5. After cleaning, do not pick up the down sleeping bag from one side, but pick up the sleeping bag from the bottom, otherwise it will damage the fabric and lining of the sleeping bag.

6. Frequent transitional washing will damage the warm -fitting medium of down to Sleeping bags. Therefore, please minimize the number of washing times while keeping cleaning.

7. Sleeping bags are suitable for drying and drying in a ventilated and dry environment to avoid strong sunlight. UV rays will damage the surface of the nylon.

8. You can use a large commercial dryer with a large capacity. You must keep low temperature drying and have enough room for Sleeping bags.

9. After drying, please continue to shake the sleeping bag and gently pat the duvet tangles to make the down completely stretch. After the sleeping bag is restored, put it in the storage bag.

Disclaimer: The above method stems from the index of the program system or the sharing of netizens. It is for your reference only and does not represent the research perspective of this website. It proves that it is valid. Please pay attention to the authenticity and authority of the source of the content of the content.Apply to delete & gt; & gt; error correction & gt; & gt;

How about automatic inflatable moisture -proof pads

Automatic inflatable moisture -proof pad is a high -end moisture -proof pad, which is made of sponge and compressed Bags. It has very good elasticity and feels Simmons similar to the family.The automatic inflatable moisture -proof pad is very convenient to use in the wild. When it is not used, it is in a vacuum state with a small size.If you want to use an automatic inflatable cushion, you can directly open the air mouth. The inflatable cushion will automatically enter the air. The sponge in the automatic inflatable pad will begin to swell. You can use it.

Automatic inflatable moisture -proof pads do not need to blow gas with the mouth. The filling of the filling material is high, which will not cause the pad to soften, and the warmth effect is very good.Due to the different selection of materials, such moisture -proof pads are divided into high, medium, and low grades, but no matter which grade, its weight, price, and volume are relatively high, and consumers can choose according to actual needs.

How to choose automatic inflatable moisture -proof pads

1. Look at the materials of the noodle

Low -grade uses PVC -coated polyester silk, so the quality will reach more than 1 kg.The mid -to -high -grade polyester silk is used for PU coating. The core core is high -quality sponge. Therefore, the compression sensation and toughness are very good. In the bonding method, it can be divided into three methods: edge, semi -bonding and full bonding.High -end products are treated in a full bonding method. After the gas is charged, the mat is integrated, so the comfort is very good.

2. Look at the production process

This kind of moisture -proof pads generally have a large volume. In order to reduce the volume of the cushion, special manufacturing processes will be produced. Common PVC high -frequency melting processes, PVC glue combined process, and TPU hot -melt full fit process.There are also varieties on the market that will make the cavernous heart into a honeycomb -like. When the strength is strong, the volume will be greatly reduced, and the weight can be controlled at about 700 grams. However, because the process is more complicated, the price will be more expensive.

3. Look at the quality of the sponge

Indexes of sponge quality include density, opening rate, percentage of rebound, and anti-fatigue. The general sponge density is between 16-25kg/m3. High density is the basic factor to ensure the rebound.However, advanced foaming technology can make higher rebound rates at the same density, such as a sponge with a higher open -hole rate.As density decreases, indicators such as rebound rates and fatigue anti -fatigue also decrease accordingly. Therefore, the self -charging pad made of light -quality sponge is difficult to rebound quickly after long -term compression.

4. Look at the breath

Automatic inflatable moisture -proof pads usually have two types: plastic air, and metallic gas. These two materials have their own advantages.From a firm perspective, the impact of plastic gas mouth is also sufficient.And compared to the metal gas mouth, the weight advantage is very obvious, and the appearance design has changed a lot, but it is not resistant to high cold. It is a fatal weakness of it. Therefore, it is generally used in leisure and non -limit outdoor sports.

5. Look at the after -sales service

Before deciding to buy an automatic inflatable moisture -proof pad, there are some things you need to consider, that is, the accessories and after -sales of the product.Because the self -filled pad is often used in complex environments such as the wild, it will inevitably be damaged. Rich and detailed after -sales service is very important.

Disclaimer: The above method stems from the index of the program system or the sharing of netizens. It is for your reference only and does not represent the research perspective of this website. It proves that it is valid. Please pay attention to the authenticity and authority of the source of the content of the content.Apply to delete & gt; & gt; error correction & gt; & gt;

[Material of raincoat] What kind of material is the most durable raincoat for buying raincoat?

What is good for buying raincoat?

Oxford cloth

The product fabric obtained by Mianlun or polyester has been obtained by a specific weaving method. It has easy washing and dry, soft feel, good moisture absorption, soft fabric color, soft cloth body, good breathability, comfortable wearing, and double -color effects.

Mianlun (nylon))

The lightness of silk is good, strong and abrasion resistant, but it is easy to deform under external force, so its fabric is prone to wrinkles during wear.

Polyester

The biggest advantage of polyester raincoat fabric is that the anti -wrinkle and preservation are very good, but the chromosome is poor and the hygroscopic breathability is poor.

waterproof and humid cloth

It is a layer of waterproof and humid coatings in the inner side of the fabric, such as Raincoats commonly used by police and climbers, with waterproof and breathable effects, but the price is high.

In short, Oxford cloth is more suitable for waterproof clothing materials, which is determined by its weaving law.

What material raincoat is the most durableRainwear purchase

1Look at the size: Most of the raincoat packaging will have a comparison table that chooses the size of the raincoat, but the size of the Raincoats made by the raincoat manufacturers on the market is different. ThereforeGo to buy Raincoats of different brands, it is easy to have errors

2Try to penetrate: It is best to try it on Raincoats, but usually the Raincoats in the mall cannot be tried. It is recommended to wear it.mPersonnel to buyLThe raincoat, and so on, it will be better, even if you wear more clothes in winter.

3View materials: The material of Raincoats is roughly divided into three categories, with different materials and different prices.Consumers can buy according to the actual situation: Polyethyl chloride (PVC) Material: The jelly semi -transparent plastic raincoat is often seen outside. This raincoat is low in price, but it is easy to damage.

Material with nylon and polyvinyl chloride: another layer of nylon cloth materialPVCThe waterproof layer, its price is moderate and it is not easy to damage. It is the main material of the raincoat now.

Material with waterproof and humid cloth: Apply a layer of waterproof and humid coatings in the inner side of the fabric, such as Raincoats commonly used by police and climbers. Its waterproof and humid layer is10For 100 million micropores, these micro -holes can make gas molecules pass, but they cannot allow large water molecules to pass. Therefore, the waterproof and breathable effect can be achieved. The disadvantage of waterproof and humidity is that the price is more expensive.