What is Adidas coconut Shoe Belt -Rope Castle system method

1. First of all, put the shoelace from the bottom two shoe holes at the bottom.

2. Straighten the two ends of the shoelaces, and then put it up in the second row of shoe holes.

3. Before entering the next row of shoe holes, cross the shoelaces, and then put in from the other side of the vertical direction.

4. When you wear the top shoe holes, you need to cross the two shoelaces again, then pass through the vertical part, and finally tie it.

How is Adidas coconut Shoe Belt -Slawing Method

1. Put your shoe laces from the bottom, and then wear it up from the bottom of each shoe hole.

2. Put the shoe laces in a circle in the shoe gang, then cross the two shoelaces, and then wear it from below to the next row of shoe holes.

3. Repeat the above steps until the upper toe is worn to the top shoe holes.

How is Adidas coconut shoelaces -KAWS system method

1. Remove Yeezy 350 shoelaces.Be careful not to be anxious during the disassembly process, don't cause damage to the shoes.

2. Put the laces into the shoe and wear it from the inside, located on the two shoelaces on the inside of the upper top of the toe.It is worth noting that the length of the lace of two holes must be kept the same as after wearing, otherwise it will be difficult to get in the future.

3. The next hole stuffs the shoelaces from the outside to the outside of the upper row of the upper row of the toe.Be careful not to collect too tightly, if you close it too tightly, it will affect the beauty of the upper.

4. Put the shoelace from the inside out, and the holes you wear are located outside the first row of the toe.

5. Put the shoelaces you wear into the inner lace holes in the second row of the upper toe.Such a "X" is completed.

6. At this time, the "X" on the other side is also made, and the steps are the same as above.

7. Next, wear the laces on both sides from the holes in the inside of the third row of the toe.At this time, check whether the two sides of the shoes are the same as long, otherwise it will affect the results.

8. Cross the shoelaces on both sides from the lace holes in the last row to form a large "X".Pay attention not to occupy the holes of the outer shoelaces in the last two rows.

9. After completing the shape of the three "X", put the lace inside the shoe from the shoelace holes outside the third row of the toe,

10. The shoelaces you wear are passed into the shoe from the last hole, but you are not directly put in.

11. Next, take the extra shoelaces around the oblique shoelaces.Put a little bit of laces in the outer lace hole in the third row of the in the toe.

Adidas shoe clothing recommendation & gt; & gt;

What pants to wear with Adidas coconut shoes

Trousers

In fact, there are still a lot of pants suitable for coconut shoes. If we choose a work pants to match, we will be very handsome. This is also a very popular pants now.Of course, this trend of clothing is also not picky, and it will be very suitable.

pants

Straight pants and coconut shoes are also a very suitable match, because straight pants have a retro fashion sense, so if you want your own clothing to match the Hong Kong style retro, such a straight pants are very suitableof.

pants

It can show unruly personality and street -full pants with coconut shoes, which is instantly fashionable.White coconuts can be paired with light blue ripped jeans, black coconuts with black pants.

Adidas coconut shoes matching method

denim jacket small pants coconut shoes

The black denim is paired with black foot pants and wearing black Yeezy. It seems to be inadvertently matched, but it is actually thin.Coupled with Yeezy's shoe type itself, the leg shape is very modified, so the overall shape does not look very monotonous, but it feels very comfortable.

Sweire shorts coconut shoes

Sweire shorts show long legs, and Yeezy was very modified.In this way, the legs look better.coconut shoes are really a typical example of the feet, and long legs meet this shoe even more against the sky.

T -shirt porn jeans coconut shoes

For the matching of coconut sneakers, we can learn from the combination of stars. The matching of the big power is very trendy. Black personality T -shirts and nine -point porn jeans, paired with a pair of black coconut sneakers, are full of leisure.

T -shirt denim shorts coconut shoes

coconut sneakers are also very good with short models. This gray coconut sneakers are very versatile. It is equipped with a gray camouflage T -shirt and a pair of black denim shorts, fashionable and personality.

jacket hooded sweater ripped pants coconut shoes

Black jacket is a very handsome and thin clothing, with a red hooded sweater and a pair of black hole pants, and a pair of black coconut sneakers, casual, generous and handsome.

coconut shoes for long coats

coconut sneakers with coats are also very beautiful. This gray long coat is very beautiful, suitable for tall and beautiful eyebrows, paired with a pair of black leggings, and a pair of pair of coconut sneakers, full of tide.

Cardig sweater chiffon shirt ripped jeans coconut shoes

Black coconut sneakers are very versatile, with a white chiffon shirt and a pair of gray porn jeans, and a gray cardigan sweater, fashionable and personality.

Adidas shoe clothing recommendation & gt; & gt;

1. Why are the standard size of ice and petherons a little small?

Ice hockey shoes have a variety of length and width. However, it should be noted that most icehouse shoes are not traditional shoe codes. Generally speakingWhy is this?

In fact, the reason why ice hockey shoes are smaller is mainly because Ice and soy shoes are different from traditional shoes. Ordinary shoes are for comfort, and ice hockey shoes are for professional level protection and taxiing technology. Excessive size will cause ankle joints.The stability is poor, so that the blisters and the decrease in the slide capacity appear. Therefore, in general, the codes of ice hockey are 1-1.5 yards smaller than the shoe code. Of course, this is just a rough estimate.Another set of size algorithms that are completely different in shoe codes, you need to pay attention when buying.

2. How to choose a size of shoes for buying ice hockey shoes

When buying ice soy sneakers, it is important to choose the right size. Avoid the laziness and saving size. It is generally recommended to choose after trying it on.Try to be as precise size as much as possible:

1. First of all, according to the length of the feet on the measuring board, measure the width of the foot and visual inspection of the arch of the foot to visually determine the foot type and choose the appropriate icehouse shoes.

2. Then, first use the sitting position when trying it on. At this time, the big toe can gently touch the front cover of the ice coat shoes as the ideal.

3. Finally, when the center of gravity falls to the middle of the feet, the back heel should be firmly locked in the heel bag. At this time, the big toe should no longer be exposed to the front lid of the icehouse shoes.Essence

When buying icehouse shoes, it is recommended that you go to the professional ice hockey equipment store to buy ice and petal shoes under the guidance of professionals. Professional ice hockey equipment stores can also provide comprehensive supporting services, such as hot -fixed type, grinding knife service and even even are even a knife service and even a knife service and even a knife service and even a knife service and even a knife service and even a knife service and even a knife service and even a knife service and even a knife service.The inside of the shoe body of the ice sneakers is modified to eliminate the pain points caused by a small number of players for special foot types.

running shoes Series

Cushioning system (cushion)),:,

Cushioning shoes, mainly suitable for normal foot, no excessive within/ /In the outer character, there is no severe lapsee. run the front of the forefoot to the ground. It does not need to emphasize the support of the arch and the heel correction function.

Related cushioning techniques are:asicsofgelCushioning gel andI.G.S.Seismic system,New BalanceofabzorbShocking material,SauconyofPowerGridCushioning midsole,mizunoofInfinity WaveThe full palm shock absorption structure.

Stable Department (Stable Department (Stability)),:,

Stable running shoes are mainly applicable to a certain arch support and heel correction./ /The eight -character foot, the back of the feet on the ground, often runs for support to protect the feet, and the weight of the running shoes is slightly heavier.Most of the running shoes on the market belong tocushionAs well asStabilityIn these two categories, the performance of the two is small.

Related stable technologies are:asicsofdynamic duomaxGuidance system,New BalanceofStabilicoreSupport technology,SauconyofsaUC-FITStable system.

Department of Control (Motion Control)),:,

It is mainly suitable for severe internal footprint phenomena. It used to be injured, poor ankles, poor ankle strength, large weight, and Running full feet on the ground. More support and step -up correction are needed to prevent injuries.Compared with the previous two types of running shoes, the control of the running shoes is greater, and the protection and cushioning performance is stronger.

Related control techniques include:asicsofheelclutchingSystemHeel stabilization system,New BalanceofStabilicoreSupport technologyTBEAMThe midsole stable board.

How to extend the life of running shoes

1. Do not wear running shoes for other sports, such as basketball, football.Different roads have a huge degree of wear on running shoes. Running on the road is far more than expenses on the forest road.In the case of conditions permit, try to run on a professional runway such as plastic.

2. Try not to run on rainy, snowy, and exposed to asphalt roads.A pair of running shoes should be "rest" for two days. Wearing the same pair of shoes for a long time will accelerate the aging and dehydration of the shoes. Proper "rest" can restore the shoe in a good state and keep it dry, which is also conducive to relieving foot odor.

3. Put/take off shoes in a gentle way.When we are in a hurry, we often stuff their feet directly into the shoes. Over time, we will cause irreversible deformation to the shoe help part.

4. run shoes will be tighter after cleaning and exposure, so don't wash shoes with high frequency.After the surface of the Running shoe appears dirt or colored marks, apply an appropriate amount of water or detergent on the old toothbrush or soft hair brush, gently wash, and then rinse it with water.Note that it is not recommended to flatten the wet shoes when it is dry. Instead, it is not recommended to put the toe to the bottom of the shoe to the wall and dry at the ventilation of the room temperature to prevent water from being immersed in the middle soles.

1. sports shoe size description

Chinese shoe numbers and several main shoe numbers in foreign countries:

1. The formulation of Chinese shoe numbers: The shoe number based on the length of the feet, one unit (code) is about 6.35mm.

2. Several representative shoe numbers in the world:

Method code: Calculated according to the inner bottom length, 1 number length is equal to 6.67mm;

British code: calculate according to the inch -length inches, 1 inch = 25.45mm;

Code: The size of the United States also takes the inch as the unit, with a length of 9.00mm;

Daily code: The Japanese size takes centimeters as the measured unit.

2. Is leather shoes the same as sneakers?

The difference is that the leather shoes will be the smaller than the sneakers. The specifics are as follows:

1Because leather shoes are formal shoes, the number of codes is definitely produced according to the standard code of most people's feet, so that when people can wear it, they can look more beautiful as a whole.

2And sneakers are used to wear during leisure, so the design will be relatively loose, so that the feet can be released well during exercise.This also determines that there is a difference in the number of sneakers and leather shoes.

3sports shoe code is generally large, which is very suitable for all kinds of people to wear.But leather shoes are not necessarily, because everyone's feet will be different, length and width thickness, etc. These must be considered. The leather shoes should be suitable for the foot.The leather shoe code is different from a few millimeters from the sneakers.Relatively speaking, it is a number.

3. precautions for the purchase of sneakers

1. Longer shoes

(1) The soles of the feet are large, and the Bone bones are exposed to more people

(2) People with sweating a lot of feet

(3) The toes are almost side by side into people

(4) People with heavy weight

(5) People who are growing or older

(6) People walking a lot

(7) The slender shoes on the design

(8) design the pointed shoe of the toe

2, Dont lengthen too much shoes

(1) The bending of the feet is small

(2) Light weight

(3) shoes with higher heels

(4) design fattened shoes

(5) design shoes with wider shoes

Furthermore, pay attention to the shoes itself, and then consider other factors:

(1) The hard, soft, thick, thin, telescopic degree of materials.

(2) The shoes themselves are low, high -top, high -heeled, and lace.

(3) Consumers' hobbies, age, habits, occupations, etc.

Usually choose sports shoes to choose shoes length (generally refers to the length of the midsole).1.5-2.0About a cm.

3When buying sneakers:

(1) Put on the socks worn when you perform this exercise or socks of the same thickness.

(2) Ten the shoelaces and adjust the tightness of the shoelaces appropriately, so you can feel whether the footability of the shoes is ideal.

(3) Buy a moderate soft insole.

(4) The weight of the shoes should be light, and the heavy person can easily make the wearer feel a sense of falling off and easy to get fatigue.

(5) Don't open your shoe mouth, otherwise you will easily fall off when you wear it and are easy to get sick.

(6) Check the rear heels of the shoes to avoid high or hard rear follow -up design.

(7) The upper and soles of the shoe are soft and easy to bend. If it is too hard, it is not easy to bend, and it is easy to fatigue.Use squatting position when trying to check whether the bending of the shoes is good.

(8) Pay attention to the height of the shoe mouth and consider the position of the ankle Bone, otherwise it is easy to rub the Skin when wearing.

(9) Check whether the heel height of the sole is higher than the forefoot part, because the human feet are used to this method, the height height should not be too high, and pay attention to whether the heels use the air cushion or texture.

(10) The seams inside the shoe should be good.

(11) Try to wear sports shoes, wearing it a few steps, it is best to alternate the weight of the whole body to each foot, check whether the toe has enough space to accommodate the feet slightly stretched due to pressure.

(12) Outdoors need to be designed in thick and consumed sole, which is not easy to slip, and indoor shoes require flat shoe soles.

(13When buying shoes,,It is best to arrange in the afternoon to avoid buying shoes in the early morning, because the feet will be smaller at that time.

(14) According to different sports purposes and venues, choose compatible sports shoes.