1. Dimension measurement skills of radiator hook

Under normal circumstances, heating designers will calculate the height and width of the hedles based on the thermal demand, placement position, room orientation, decoration style and the heat dissipation of each piece of radiator.

1. If there are rooms with floor -to -ceiling windows and large bay windows, short heating slices should be installed under the window, which can effectively use space, facilitate the heat dissipation and heat circulation of the heating film, and complete the heating of the whole house.Judging from the response of good and comfortable heating users, most people now use the heating height of 1500mm and 1600mm such as the living room and bedroom, and in the bathroom, a dedicated bathroom airbuilding is used.

2. Although the radiator can be customized at will, the size of the Heating tablets can be freely selected according to the needs, how to choose the heating piece of professional heating engineers to avoid any design that affects the normal heat dissipation performance, so as not to be installed and used in the heating film.It brings danger to family property and personal safety.

2. How to install the radiator hook

1. Determine the linked drilling position in accordance with the actual position of the radiator.

2. Drill the hook position in the installation. If you install the M8 expansion bolt, use 10.5 drills to drill about 100mm deep. If it is a plastic expansion throller, use 8 drill bites and 85mm deep.

3. If you want to use the ground, you should first drill the hole with 6 drill bits on the floor, and then use a plastic expansion thrush to fix the ground to the floor, and then use the expansion thrush to fix the hook on the wall.

What should I do if my Dog is bitten?

1. Rinse the wound.Wash the wound immediately with the flowing water, push the virus as much as possible, and squeeze the blood out.If possible, it is best to rinse with 20%soapy water and rinse for 20 minutes to 30 minutes.Then disinfect it with iodine, and then wash the iodine with alcohol, repeated 3 times.

2. Immediately go to the local epidemic prevention department to inject the vaccine, and you must not be dragged for a few days before injection.The rabies have a short period of time when the latent period of the rabies will become ill, and it may take several years.

3. If the wound is severely bitten, you must inject antiviral serum and use it at the same time as the vaccine.[View more]

What should I do if my Dog is caught?

1. If the patient is caught by a Dog, it is very superficial, the local tissue is mild damage, and there is no mobilization bleeding. At this time, the hydrogen peroxide, vitality iodine, and physiological saline should be given as soon as possible after the injury.At the same time, it can be orally to strengthen anti-infection treatment. Most patients can gradually scab and heal the local wounds after 24-48 hours, which will not cause serious infections.

2. If the patient is caught deeper by the Dog, the local tissue is accompanied by obvious redness, pain, and active bleeding. At this time, it is necessary to perform local debridement sutures under the condition of disinfection as soon as possible. At the same time, the rabies vaccine is injected.Drug change treatment, intravenous inflammatory drugs such as caterpillars or cephalosporin to prevent infection, which can effectively avoid the occurrence of rabies or incision infection, and can achieve good results clinically.

What should I do if I bite by a cat

First of all, you must not panic. If the wound is not bleeding, you should immediately clean up the wound.But rabies virus is transmitted with blood. If it is bitten, the wound is not large, and there is no bleeding.Just rinse with clean flowing water.Just apply some daily antibiotic ointment.But if the wound is bleeding, it must be discussed separately.When the wound is found to be bleeding, you should leave the cat cleanly at this time. If the wound is deep, it needs to be cleaned in depth, and a rabies vaccine is required.[View more]

What should I do if my cat is caught?

After being caught by a cat, because the cat is not sure whether the cat will carry rabies virus, it is necessary to deal with the caught wounds from the perspective of security.At the same time, inject rabies vaccine in the shortest time.This can effectively prevent the occurrence of rabies.Because rabies virus can be carried on the hair, but the cat may not necessarily occur after carrying rabies virus, so whether the animal is carrying the virus can not be judged from the appearance.People are infected with rabies epidemic rabies, so from a safe perspective, whether the cat has a rabies virus carried, as long as the human body is caught, the rabies vaccine needs to be injected as soon as possible to effectively prevent the occurrence of rabies. After all, rabies have no effective treatment at presentMethods, the mortality rate is almost 100 %, and prevention is the most effective way.

What to do if Dog fights are bitten and bitten

If the Dog's wound is not serious, the owner can cut the hair around the wound first, and then use a cotton ball to dip the physiological saline to wash the wound.Then bring the Dog with Elizabeth collar to prevent licking and check the wound healing every day.If the Dog's wound is severe, or the Dog has an abnormally reaction, you should seek medical treatment immediately.[View more]

What to do if a cat fight is bitten and bites

For cat wounds that are bitten by similar bite, they must also be disinfected and treated in time to prevent wounds from worsening infection and inflammation.For the wound of cats bitten by a cat, if the cat who bits is not carried by rabies or a cat that avoids the disease, pay attention to the injured cat for inoculating rabies vaccine to avoid serious consequences.[View more]

The purpose and tools of first aid bandaging

1. Purpose

Protect the wounds, reduce pollution, fix the dressing, drugs, fractures, compress the hemostasis, reduce pain, etc.

2. tools

(1) Scroll bandage or triangle scarf, special parts can be used with poly heads or butycles.

(2) Sterile gauze.

(3) In cases of first aid, such as no bandage and gauze, you can replace with clean towels, clothes, etc.

Introduction to first aid bandage methods

1. Basic bandage method of scroll bandage

(1) Circle bandage method:

When the bandage starts and ends; fix the bandage of small wounds in thick and detailed parts such as neck, wrist, chest, and abdomen.

Step of operation:

Overlap bandwing (not less than 2 weeks).

The bandage will be completely covered next week.

Fold the end of the band of the end of the band, fix it with glue or safety, or cut the middle of the band tail into two ends to avoid the wounded area and fix it (the following bandaging fixing is according to this method).

(2) Snake -shaped bandage method (oblique stretching method):

It is used to quickly fix from one place to another, which can be used for fixation of plywood.

Step of operation:

Trigger the bandage around for two laps.

Taking the bandage width as the interval, the oblique row is not covered by each other.

The bandage is wrapped around for two laps again.

The fixed method is the same as the bandage method.

(3) Spiral bandage method:

It is used to bandage the same parts such as upper arms, fingers, trunk, thighs, etc.

Step of operation:

Trigger the bandage around for two laps.

Slightly inclined (& lt; 30 ), and the spiral is wrapped up.

Cover 1/3 to 1/2 last week.

Wrap the bandage around two laps again and fix it.

(4) Spiral anti -folding bandage method (folding method):

For parts with varying diameter, such as forearms and calves.

Step of operation:

Trigger the bandage around for two laps.

Slightly inclined (& lt; 30 ), and the spiral is wrapped up.

Fold the bandage down every week to cover the 1/3 ~ 1/2 of the last week.

Wrap the bandage around two laps again and fix it.Be careful not to reflect on the wound or Boolon.

(5) "8" -shaped bandage method:

For parts with different diameter or bent, such as elbow, shoulders, hip, knees, etc.

Step of operation:

After flexing joints, the joints are bandaged for two weeks at the end of the joint.

The right hand stretch the bandage from the lower right to the top to the left, bypasses the back, and then stretch the joint to the left from the upper right (near the heart) to make the "8" shape./2.

Circle bandage for 2 weeks fixed.

(6) Return to the bandage method:

It is used for bandaging parts without the top, such as finger, head, amputation.

Step of operation:

Circle bandage for two weeks.

The bandage is folded up and bandaged vertically with the right hand. The center of the residual end is covered, and then the left and right sides are alternately covered.

Then fix the bandage reflection ring for 2 weeks.

2. Triangular scarf bandage method

The size of the triangle scarf should meet the specifications.Applying surgical knots (Square knots) during knots has the advantages of firmness and rapid solution.

(1) Bringing method on the top of the head:

Fold the bottom of the triangle scarf up to about 3cm.

Put the middle of the middle part of the wounded forehead, flat with the eyebrows, and pull the top corner to the back.

The two corners of the triangular scarf are above the ears and two ears, pull the pillow to cross, and then go to the forehead to fix it; Turn the top into the top.

(2) The hats bandaging method:

The top corners of the triangle scarf and the center of the bottom are knotted each, which is the fans.

Place the top angle in front of the forehead, and the bottom edge is under the back of the head.

Hold the head and tighten the two corners to the face.

Fold the mandarin on the side of the two corners.

Pull the pillow and fix it.

(3) Facial mask bandage method:

Put the triangular towel on the top of the triangle and put it on the jaw.

Cover the triangle scarf on the face (cut a small mouth on the nostrils, eyes, and mouth).

Pull the left and right corners to the pillow and cross the pillow.

Go around the forehead to knot.

(4) Single eye bandage method:

Fold the triangular scarf into a four -finger width band.

Put it on the eyes.

After the lower side of the lower side passes through the pillow to the front side of the forehead, press the shorter end, and then surround the head to the jealum side temporal.

Jacking with another section of the down.

(5) Betting method:

Fold the folding into a four -finger width towel central minister first cover one side.

The lower end is behind the pillow from the ears, pressed the upper end through the opposite ear to the top of the eyebrow, and continues to around the head to the front of the opposite ear.

Slip the upper end and cover the other eyes.

Wind a knot on the opposite ear under the ears and the other end.

(6) Swallow tail scarf bandage shoulders:

Fold the triangle scarf into a tour tail, the big horn is above, and the small horns are down.

The angle of the tail tail scarf was placed on the upper shoulder of the wounded shoulder and the small horns were in front.

"

The large horns are pulled by the back of the back to the opposite armpit.

(7) Snaptles bandaged shoulders:

Fold the triangular scarf into a tour tail, two swallow tail horn and so on.

The angle of the angle faces the alignment department, and the tail tail is put on the shoulders.

The two swallowed corners pass through the left and right shoulders, and pull it to the armpit and the bottom corner of the dovetail.

(8) Triangular scarf bandage chest:

Put the bottom of the triangle scarf on the chest, about 3cm height on the elbow nest.

The top angle is more than the wounded shoulder and hangs the back.

The middle part of the triangle scarf is covered in the injury of the chest, and the ends are pulled to the back.

The top angle also knotted with the corner.

(9) Swallow -tail scarf bandage chest:

Fold the triangle scarf into a troor tail.

A folding side at the bottom.

Put horizontally on the chest, two corners upward, separate on both shoulders and pull to the neck.

Towards the top angle of the bottom into the opposite armpit and knotted with another bottom angle.

(10) Triangular scarf belly belly:

The top corners of the triangle towel are facing down, and the bottom is placed horizontally on the umbilicus.

Tighten the bottom angle to the waist knot.

The top angle is pulled to the top of the hip, and the remaining corner is knotted.

(11) Triangular scarf bandage upper limbs:

When the triangle scarf is knotted on the back of the wounded side, the head is left with a longer spare head; the other bottom angle is pulled along the back of the arm to the side shoulder.

The top angle wraps the wounded limbs.

The forearm flexes to the chest and tighten the two corners to knot.

(12) Triangular scarf bandage hand:

The fingers are facing the top corner of the triangle scarf, and the hand is placed flat in the center of the triangle scarf, and the bottom edge is located on the wrist.

Lift the top angle on the back of the hand.

Pull the bottom corners to cross the back of the hand, and then go back to the wrist.

Jie with the palm side or back side.

Note: The bandaging of the foot is the same as

(13) Triangular scarf bandage calf and foot:

Place your feet on the side of the near one side of the triangle scarf.

Specifies the long wrapped side to wrap the calf to knot.

Pub up with the bottom corners on the other side, knots around the ankle and the ankle joint.

precautions for first aid

1. When bandaging wounds, simply debride and bandage first.Do not touch the wound in your hands and stolen goods. Do not rinse the wound with water (except chemical injuries). Highlight the internal organs outside the body cavity. Do not recover. Do not take out foreign objects in the wound.

2. When bandaging, it should be reliable, loose and appropriate.

3. Make the patient comfortable when bandaging.Pay attention to breathing with your chest Belt, and pay attention to maintaining your function.Cotton pads or gauze are used for cotton pads or gauze at the osteotomy of the Skin wrinkles. When you need to raise your limbs, you should give appropriate support for support.

4. The bandaging direction is bandaged from the distant heart to the near -hearted end, and the finger (toes) should be exposed to observe the blood transportation situation.When the bandage is fixed, it should be placed on the outside of the limb. Avoid knotting on the wound, osteochidal or easy to be compressed.

5. When lifting the bandage, first unbutton the fixed knot or remove the tape, and then pass the loose solution with each other with both hands.When an emergency or bandage is soaked by the wound secretion, it can be cut with scissors.

Disclaimer: The above method stems from the index of the program system or the sharing of netizens. It is for your reference only and does not represent the research perspective of this website. It proves that it is valid. Please pay attention to the authenticity and authority of the source of the content of the content.Apply to delete & gt; & gt; error correction & gt; & gt;

Pearl Orange,Red fruit thin columns, do not say, the genus of Qiancao family; place of originDistributed in South America, central Taiwan and south, the Philippines, Australia, etc.

Morphology

Pearl orange plants will be said to be Succulent plants by flower buddies. In fact, it is not. Pearl orange and quiltsceae is a herbaceous plant. The scientific name is red fruit thin column grass.Or ovate triangle, about 6 mm long, flowers without stems, top -born, single, small.Nuclear fruit spherical, red when mature, with 2 small cores inside.

Growth environment

Pearl orange is bright and bright, not drought to resist.The soil of cultivation of pearl orange should be loose and breathable.It is placed in a bright half -shaded place (the winds in the south direction are ideal), but the sun should be avoided.Potted pearl orange in summer can be placed outdoors, but it also needs to avoid direct sunlight.The temperature should not be too high.The environmental temperature of winter should not be lower than 8 degrees Celsius.Like cold and cold climate, the farming experience of the garden is the most ideal of 18-24 degrees.Watering should be watered after the surface soil is dry.If the light is insufficient, the stems and leaves are easy to cover the fruit.From the end of spring to the cooked time, it is best to put it in a place where the sun is sufficient and can block the wind and rain.

Distribution

Central and southern Taiwan, the Philippines, Australia, etc.

Cultivation technology

1. Soil selection

Pearl oranges like the soil are moist and avoid waterlogging. The soil ratio is imported by imported peat: perlite: vermiculite = 1: 1: 1 or rot leaf soil: charcoal powder: perlite: clean river sand: rural soil = 1: 0.3: 0.5: 0.5: 1 or rot leaf soil: Pastoral soil: clean river sand = 1: 1: 1 can be paved around to ensure the humidity of air humidity in the small environment. When planting, a small amount of volcanic stones are paved at the bottom to prevent the bottom of the water from the bottom of the water and breathability.insufficient.

2,LightPhoto and temperature

The growth of pearl orange requires a certain degree of light to resist semi -yin, but to avoid strong sunlight directly illuminated.During the breeding process, the plants of pearl orange should be placed under the bright scattered light, especially in summer, to shade, but it cannot be too shade, which will affect flowering and results.

The cold resistance capacity of pearl orange is strong. The suitable temperature for growth is between 10 C and 20 C. It can resist low temperature below -10 C in winter, but the temperature of wintering should be kept above 5 C.

3. Watering and fertilization

Pearl Orange likes a slightly humid growth environment. In summer, the pot soil needs to be kept moist, and it needs to be slightly dry in winter.Watering should be appropriate and ensure that watering should not be poured to the leaves or fruits, so as not to rot the plant.You can use the potting method or spray method.Fertilization should also be moderate, and Fertilizer is required every 1-2 weeks.

4,Breeding method

Division:Take the autumn division as the best period, take out the whole plant, divide it according to the shape of your own needs, gradually separate the root, re -plant it, and pay attention to moisturizing after planting. Due to the damage of the root, use aspirin when planting.The solution (aspirin enteric tablet with a piece of water 500ml): Glucose water (0.1%glucose water) = 1: 1 mix and mix it for mixing soil, mix until the soil is moist and not wet.There is no need to water for 1 to 2 weeks. Spray water once a day once a day. The weak light is maintained for 5 to 7 days, and then gradually replenished the light.

sowing:Pearl oranges can be sowed and reproduced. It is carried out from February to March and can also be divided into division and in August.Take the seeds with cooked fruit, remove the peel, dry it slightly, and then use an appropriate amount of root powder to soak the seedlings, cover it lightly on the surface of the soil, cover the peat 1 mm or laid a thin layer of fresh water moss., Then keep the temperature from 10-15 C for moisturizing and cultivation, and buds can grow in 2 to 3 weeks.

Group training:In recent years, a new method of breeding is selected. It can be cultivated with chemical agents such as medium and agonists. It can be used in large quantities for production. The product shape is relatively uniform, neat, and large breeding.

Bloom

When the pearl orange is blooming, it needs to be artificially pollinated so that the results of pearl orange can be more.

Pest

Sometimes pearl orange is infected with gray mold, and you need to pay attention to controlling the humidity of the growth environment.

precautions for pearl orange breeding

1. Avoid strong light exposure

The growth of pearl orange requires a certain amount of light to resist half yin, but to avoid strong sunlight directly illuminated.During the breeding process, the plants of pearl orange should be placed under the bright scattered light, especially in summer, to shade, but it cannot be too shade, which will affect flowering and results.

2. Pay attention to keep the pot soil properly humid and water with the "Basin Dafa".

Watering the basin method to avoid water falling on the leaves, causing plant rot.Once every 5-8 days, according to the location of the placement, the choice is to see the fruit and the edge leaves when there are wilting, but do not accumulate water.In the case of drying high temperature, you can use the spray of a watering pot to increase the humidity.The pot soil in summer is moist, and it is slightly dry in winter.After the fruit is generated, it is necessary to ensure that there is no water on the plant, otherwise the fruit is prone to rot.

3,Keep light and moderate ventilation

Pearl Orange likes a cold and humid environment, is not drought and high temperature, and avoids strong light exposure.I like bright scattered light, such as insufficient light, leaf and leaves, and loses the value of ornamental.The most suitable growth temperature is 10 ~ 18 C, and the low temperature below -10 C can be resistant in winter, but the temperature of the winter should be kept above 5 C.Pay attention to maintaining long -term ventilation and placed in a place that can block the wind and rain, otherwise it is difficult to appreciate its glamorous fruits.

1. Burning pot

The plain pot is a mud tile pot. It is the most commonly used plant container. It can be divided into two types: red and gray pots.There are various specifications, the smallest diameter is about 10 cm, generally 14_33 cm, and the larger is 39 59 cm.The water and exhaust drainage performance of the plain pot is good, which is conducive to plant growth. It is widely used in the cultivation of seedlings and the cultivation of seedlings.This kind of Flower pot is not enough. It is rough. When cultivating finished seedlings, you should try to use a small pot as much as possible so that you can place it in a slightly larger pot when displaying decoration indoors to make up for the shortcomings.

2. Zisha pot

Various flowers and plants are engraved on the purple sand basin, with a variety of styles, harmonious colors, simple and elegant, and antique beauty. It is more suitable for small leaf species for small leaf species on the indoor countertop.The disadvantage of this basin is that the water permeability of the water is slightly worse, and the appropriate species must be selected when used.

3. Plastic basin

Plastic pots are one of the commonly used plant containers for indoor leaf -viewing plants. They can be divided into hard plastic pots and soft -holding plastic basins.Hard plastic basins are generally small in size, light and beautiful, colorful, and are mostly used for viewing and cultivation, but their ventilation is poor and not conducive to growth. Therefore, it is not suitable for long -term planting.It is only used, and it must be loose, ventilated and drained multi -porous substrates with good ventilation and drainage performance.The soft plastic basin is only used for the nursery of indoor leaf -viewing plants, and is generally not used for ornamental cultivation.Can plastic Flower pots raise flowers & gt; & gt;

4, glaze basin

The glaze pot is strong and gorgeous, but the drainage ventilation performance is poor.It is often used as a pelvan, which can also be used directly to cultivate large leaf -viewing plants, but it must be equipped with loose porosity matrix, otherwise the plant growth is poor.

5. Wooden basin

The wooden basin is used to cultivate large leaf -viewing plants and can also be used to cultivate some fleshy.Its specifications can be determined according to actual needs.This kind of inside and outside of the pot can paint different colors to improve the service life and coordinate with the color of the plant.It has a light scenery, good breathability, strong water and Fertilizer, low cost, and low cost. It is suitable for planting of various flowers. In addition, it can also be determined and processed according to the shape, size and cultivation of flowers according to the shape, size and cultivation of flowers.This pot is easily rotted by the erosion of water, Fertilizer, and microorganisms, and has a short service life.

6. Cement basin

Cement Flower pot is usedCementPlaced it.It is simple, with different shapes, and moderate weight, but it is suitable for garden and balcony greening.

7. glass basin

The glass flower is not breathable and cannot be watered.The glass is transparent and you can see the internal moisture.In summer, the glass flower must be placed in a cool place.Put the water layer with a glass flower, you can use pottery grains or large light stones. This individual is casual.The glass flower is suitable for leaf insertion.

8.Porcelain basin

Porcelain pots are fired with porcelain soil, which is the best in the ceramic basin.It is bright in color, beautiful in appearance, and many varieties of color, but it has poor breathability and water seepage. It is difficult to master the wet and wetness of the pot soil with this pot.It is best not to plant flowers directly, only suitable for flowers for flowers.

precautions

In addition, there are all kinds of materials for decorative materials, such as glass tanks, vine products, stainless steel clads, etc. This type of pot is beautiful and generous, which can add a gorgeous and colorful atmosphere.But for display, not cultivation.