1. design instructions for landscape street lights

Landscape art lamps are indispensable parts of modern landscapes. It can not only provide Outdoor photos, but also have high ornamentality. It uses different shapes, different light colors and brightness to create landscapes.The landscape street light design should follow the following points:

1. Choose the right position

Landscape street lights are generally set at the entrance and exit of garden green spaces, squares, and transportation roads. The traffic on both sides of the garden road and intersection, steps, surroundings of buildings, water view Fountains, sculptures, lawn edges and other people need lighting or can be with the landscape environment.Combined with a unified area.

2. The illness should be coordinated with the environment

The brightness selection of Landscape lights should be appropriate, such as entrances and exits, squares and other people's streams, and require sufficient lighting intensity; while walking trails and other roads do not require too bright lighting. soft and relaxed Lights will make the environment more quiet, comfortable, kind, and kind.pleasant.Of course, the overall landscape street lights must form a unified layout to ensure that the light illuminance is evenly and undulating, with the artistic effect of a bright and dark rhythm, and prevent the dark corner without light.

3. Choose the right street light height

The height of the landscape street lights is appropriate. Generally, the height of ordinary Landscape lights is about 3m, and the space Landscape lights with large people are higher. Generally, it is advisable to be 4M-8M.Ensure uniform illumination.

How to installLandscape lamp

1. Circuit, steel pipe layout

The design is designed to use the wire Tube and the steel pipe dark application. The construction shall be carried out in accordance with the construction process standards of the wire pipe and the steel pipe laying project. The embedded pipe should be closely cooperated with the civil construction construction.The line uses a cable to be buried in the HDPE Tube, and the pipeline is buried by 0.7m. All line branches should take reliable waterproof measures.

2. Thread

The wires selected in the Tube must meet the design requirements, and there is a factor -issued certificate. Check the insulation resistance, the diameter diameter of the wire, the material and the weight of each volume to meet the requirements before it can be used.The Tube should be carried out after the construction structure and civil construction construction operation. Put the line first. Note that the wires of the same communication circuit must be worn in the same Tube. Different circuits, different voltage and communication and linear wires must not be penetrated into the same Tube; thenClean pipelines, switch boxes, socket boxes, etc.

3. lighting installation

The installation of Landscape lights should check whether the lamps meet the requirements according to the installation venue. Check the wiring in the Lights. The installation of the lamp must be firm, the position is correct, neat and beautiful, and the wiring must be correct.After the installation is installed, the insulation resistance is detected and Running after passing the insulation resistance.

4. Ground protection and safety measures

Set up a closed ring artificial grounding device around the Outdoor lighting box, 5m spacing, 0.8m buried depth, and not more than 10 ohms.To prevent lightning strikes from over -voltage, a first -class surge protector is set in the Outdoor lighting box.

1. Will Solar street lights be on during the day?

The street lights are generally light at night, and Solar street lights are no exception. Under normal circumstances, Solar street lights will not light up during the day.

During the day, Solar lamps are a state of absorption. When the night is darker, and the requirements of the Solar street lights are light, it will start to light up to meet the normal use at night.Generally, Solar street lights control the switch through voltage. If there are some special circumstances, the output voltage of the Solar street lights is lower. In the set value, the Solar street light will also glow during the day.

2. What is the reason why Solar street lights have been on during the day

Normal Solar street lights will not light up during the day. If the Lights are on during the day, it means that the Solar street lights are broken, and there are many reasons that may cause this situation:

1. The Solar panel does not pass the controller to charge the battery during the day

The controller detection: The red light on the controller indicates that it is charging, and the red light shining indicates that the battery is now full, and the controller is charging with a small current of the pulse.

Solar panels: If the connection of Solar panels is not very strong, it will not be able to charge normally. Generally, there is a voltage (voltage meter test), the normal opening voltage is above 17.5V; but there is no current.This phenomenon is that the wires of the battery plate are not connected (virtual welding or unconnected joints). After the investigation method can be opened directly at the black electrical cover behind the battery plate, and directly use the voltage and current meter to detect the data.If there is no current from the aluminum pool detection directly from the battery plate, it means that the battery board has problems to be replaced.

2. Object cover

If the Solar panel is covered, it will also cause Solar street lights to be unable to use normally, covering snow, and the cover of dust.When these masks cover the Solar panels, the output voltage of the Solar panel will be lower than the certain value, and the Solar street light will be triggered.

3. Optical resistance control control

The light -sensitive resistance is particularly sensitive to light. When the light is weak, the resistance is large, and the resistance value decreases as the light becomes stronger.After sliding the resistor, a balance point can be found. When the light is strong, the light resistance value is small.The use of photovoltaic resistance has certain disadvantages.The light -sensitive resistance has high requirements for installation, and it is prone to accidental control under rainy days, cloudy and other conditions.

4. The voltage of Solar panels is wrong

The Solar panel transforms the Solar light into electrical energy. The stronger the light, the higher the output voltage, and the weaker the light, the lower the light.Therefore, many Solar street lights use the output voltage of the battery plate as the control signal. When the voltage is lower than a certain degree, the street light is turned on, and the street light is turned off when the voltage is higher than a certain degree.If there is a problem with the voltage of the Solar panel, when it is lower than a certain degree, the Lights will be turned on during the day.

1. Is there no Solar Lamp on the Solar street light?

Solar street lights use solar energy to be transformed into electrical energy, and then transform electrical energy into light energy to achieve lighting. Can Solar street lights be on if rainy weather and no sun?

Solar street lights rely on their Solar panels to absorb sunlight and then convert it into electric energy for its light, but the sunlight here is not absolute, not to say that the battery board will work only when the sun is high. Generally speakingThere is a light Solar cell to store energy. The stronger the light, the higher the conversion efficiency.

The reason why Solar street lights can continue to work in rainy days is because some of the batteries are stored in electrical energy. In the absence of solar energy conversion power, street lights can continue to work for a while, but when the energy consumed by the original stored power is exhausted, but the energy consumed by the energy consumed by the energy consumption is exhausted,When the solar energy is not available, Solar street lights will stop working.

Therefore, when the light intensity is not strong, the battery plate will still save the battery, but the electricity is relatively small. It may not be enough to use the electric light at night.When the battery storage of electricity cannot keep up with its external supply, the Lights will not be turned on.

Therefore, Solar street lights can also be turned on normally without the sun, but if there is no sun for a long time, when the battery is used up, the Solar street light cannot be turned on.How many days?

2. How long does the Solar street light have no solar energy?

Generally speaking, most Solar street lights can be used when there is no sun in rainy days. After all, it is necessary to consider a certain rainy day when designing.

The reason why Solar street lights can continue to work in rainy days is because some of the batteries are stored in electrical energy. In the absence of solar energy conversion power, street lights can continue to work for a while, but when the energy consumed by the original stored power is exhausted, but the energy consumed by the energy consumed by the energy consumption is exhausted,When the solar energy supplement is not available, Solar street lights will stop working. The specific can be turned on, then it depends on how many continuous rainy days can be supported by street lights.

Under normal circumstances, the default rainy days of Solar street lights produced by most manufacturers are three days, and the rainy days of integrated Solar street lights will be longer, less than five days, as many as seven days.In other words, within the specified number of days, even if Solar street lights cannot supplement solar energy, they can work normally, but once the number of days exceeds this day, Solar street lights cannot be used normally.