Articles in Tags succulent plants

Method of succulent plant seeds

Succulent plants refer to a type of plant that appears thick and juicy in appearance; there are more than 10,000 Succulent plants in the world, and they belong to more than 100 families in plant classification.

It is not difficult to plant methods, but it cannot be ignored, and it is not necessary to plant it blindly. Before planting, you can go online to see Baidu experience. Let s share with you with my planting experience:

1Prepare a variety of meat plants for the Flower pots, first pour the soil water through the water:

If you do nt buy a dedicated soil, it is also good to match the soil by yourself (but if you want to disinfect the soil, you can use a disinfection agent to prevent plant rotting)!

It is best to use the soft peat soil (with a certain water reservation ability), because the peat soil is soft, which is very conducive to rooting;

As far as I know, the more reasonable soil method is: peat soil60%sand20%Granules20%If you can't find the river sand, you can also replace it with particles; the particles can be pottery grains, stones, etc.

2Sprinkle the seeds evenly on the surface of the soilThe

If the soil is soft, the seed surface does not need to be sprinkled on the soil. On the contrary, it is also possible to sprinkle a thin layer of soil, but it is also possible to sprinkle too much so that the seeds are not buried too deep and will not germinate!

Also note: Use the bottom of the Flower pot with a hole in the bottom!

3Follow the plastic wrap1-2Zhou, put in20Available indoor ventilation!

If the local temperature is20Around , soil is sprinkled on the surface of the seeds, but no need to protect the plastic wrap and keep the soil soft and humid (watering for a week2-3There is no regulation in the second time, just keep the soil wet)!

If the temperature is cold, be sure to put on a plastic wrap (if possible, it is best to open it at noon. This cultivated plant is full and bright in body.)!

4,wait1-2Zhou can see the super cute bud:

At this time, the plastic wrap can be lifted off, and the appropriate amount can be kept light. The succulent people like the sun very much. There is a certain amount of light.Many novices have Succulent plants because they are too frequent.

Summarize:

Three points are inseparable from breeding plants: moisture, medium, and light.The succulent is no exception.Light is an important factor that affects the growth of plant growth, but moisture and medium are the factors that directly affect the life and death of Succulent plants.If you also have a breeding or intended to cultivate succulent, let's learn the meat together.

How long does the succulent plant seeds germinate?

1Scenic: Jingtian is actually germinated, not very slow, the temperature and water are suitable.3 ~ 7The sky is almost the same. If you dont post it, it is recommended to have a difference. Be careful not to freeze the freezing.~There are individual varieties to be slower, especially the seeds collected at home, and the germination is slow.Jingtian Miao is also the easiest to be apprentice. It needs to be controlled. For lazy people, I personally think that it can be started from the soil. Do not use too much water.~For example, I used pure vermiculite for the first time.In addition, open the cover in time.

2, Raw stone flowers:PPIt is relatively easy to germinate. The seedlings are not easy to raise, but I personally feel that the seeds collected at home are slower, but it seems that the growth is good after germination. It may be related to mixed.~ ppWhen I was young, I was afraid of dryness and wetness. I was afraid of wetness. Pay more attention to controlling water. In addition, do nt dry it. The scenery feels like it. Of course, it must be moderate.PPIt is not easy to move the seedlings and it is not easy to live, so it is recommended to match the soil at the beginning. The pot is selected.PPIt is very small and not fast, so it can be moved for a long and long time, so it is recommended to on -demand and use toothpick.After the small seedlings are much taller, you can sprinkle some deer marsh on the face and fix it.Silver needle: I dont have too much Tube, which is relatively skinny, I feel that Xiao Miao is afraid of big water~The germination is also fast, surpassing Jingtianwa~It is easy to turn it when the water is big.

3Fanxing: This is also easy to live, and there is nothing special about it. I also need to move less seedlings. I have shifted the seedlings because of the first all -vermary stone. A large number of seedlings have been moved.Move again, resulting in a reduction in survival rate.

4Talking about the genus Wawei, this experience is not a lot of experience. There are ten thousand elephants sowned.7A jade fan brocade,7A jade fan, the seed is expensive!IntersectionThe first broadcast4Try a Vientiane, come out3The problem is that the soil is covered. In fact, I don't think I need to cover the soil. Later, I did not cover the soil. I was very relieved.The main reason is to be stuffy. I personally think that the water is sufficient.2point,1I'm afraid of light,2The seeds need enough water.I did not cover the soil later, and the lid was stuffed.This genus is slow,7 ~20sky.

How to prevent frozen frozen winter

1. Temperature Guide

In winter, the most important thing for succulent is the temperature. Master it well. Succulent plants can not only overwinter, but also become obese.

First of all, the flower friends should pay attention to the Outdoor temperature below 5 C, and take the succulent into the indoor or balcony; when the Outdoor temperature of the large area is lower than 10 C, the lotus palm, silver wave brocade, black mage, Xiong Tongzi, etc.Succulent plants should be quickly returned to the room.

In addition, the minimum temperature of the indoor environment is higher than 0 C, and the flesh can be safe to pass the winter; if the minimum temperature can be kept above 10 C, the Succulent plants will grow normally, and the flower buds can still add a little diluted organic nutrients that are diluted 500 times when they can dilute the organic nutrition of 500 times.Liquid is poured in fleshy to improve cold resistance.

Master these points to make your Succulent plants go smoothly!

Watering Guide

In winter, watering for succulents is the key to the state of succulent. If it is a relatively small succulent seedlings, then there will be more moisture it. It can be frequently watered to keep the soil a certain humidity.And try to put them in a warmer place, grow in a more stable environment.And the large Succulent plants will have much stronger resistance. Watering must be less, and it is not a problem to water or even a drop of water for a month.

Master these points to make your Succulent plants go smoothly!

Third, water spray guide

In addition to normal watering, it is important to spray water appropriately according to the weather.Because winter is also the most beautiful when Succulent plants need to seize this opportunity.It is generally recommended to spray water in the fleshy when it is sunny. After entering the winter, keep the air a certain humidity. With the temperature difference, the fleshy color will be faster.

Master these points to make your Succulent plants go smoothly!

Fourth, light guide

Light is too important for winter meat. As long as the flower friends have sunlight, they can take a few hours for a few hours.Even if you take the fleshy all day in winter, as long as there is the sun, it is okay.You will find that the fleshy of the sun is called a beautiful color.

Master these points to make your Succulent plants go smoothly!

Five, fertilization guide

In winter, many fleshy plants do not need to fertilize, but for the "winter species" and "intermediate species" that are still growing, they need to supplement certain liquid Fertilizer. flowers can use the organic nutrients fermented by pure plants at noon, the organic nutrition fermented with pure plants fermented with pure plants fermented.The liquid is 500 times the water, and the flesh is poured to supplement the nutrition to the succulent to grow obese.

The Buddha beads are plants under the family of Chrysanthemum, which are native to South Africa.The beads are fleshy, spherical to spindle -shaped, and there is a transparent longitudinal pattern in the center of the leaf, and there is a slightly pointed protrusion at the end of the tail.The stems are Hanging or the soil surface grows, so it is mostly cultivated as a suspension plant.

Buddha beads belong to succulent, native to South Africa.The leaf meat, the spherical to the spindle shape, the leaf center has a transparent longitudinal pattern, and there is a slightly pointed protrusions at the end of the tail.The stems are Hanging or the soil surface grows, so it is mostly cultivated as a suspension plant.Seeing that the fleshy meat like beads never thought about it and would bloom.

Cultivation technology

1. Soil: The root system of the plant is very shallow, which can be placed shallowly. Generally, the bottom hole is used with tiles, and a layer of cornography or coarse sand are paved to increase the breathability and water filtration (especially the plastic potted plants that are currently commonly used).The soil is best to use rotten leaf soil (the fallen leaves of autumn and winter trees are mixed with a certain amount of soil or a certain sand. The soil and the sand are about 1: 3).

2. Light: Buddha beads like a semi -yin environment, the light is too weak and grows slowly, and the color is dim.If the light is too strong, it will cause the pearl body due to exposure, causing the dried orchid to scorch.The growth temperature is around 12 to eighteen degrees, and it is not less than five degrees in winter.

3. Temperature: Sexuality is warm and humid, which is cold -resistant (it can withstand low temperatures of 0 C when cultivated in the Jianghuai area), high temperature resistance, the optimal temperature is about 20 C to 28 C.It grows slowly at high temperature and low temperature, especially in the high temperature environment above 30 C. It is almost dormant, and less watering should be watered, otherwise it is easy to rot.This is also one of the keys to cultivation.

4. Watering: Due to the leaf meat, juicy, drought resistance, watering should be dry and not wet during cultivation. This is one of the key to success.When the weather is dry, you can spray the leaves and vines to make up for the lack of moisture, and keep the beads full of green.Compared to half yin, the exposure may burn the bead body, and the light is too weak and does not grow strong.

5. Fertilization: The strong growth of spring and autumn should be applied thinly, and it is often sprayed with 1-3 % of nitrogen fertilizer and potassium dihydrogen phosphate on the leaf surface.

6. Pruning: During the repair, not just cut off the excess part, but start the trimming from the edge of the Flower pot or the edge of the Flower pot.It is the "top" that everyone usually says.There will be separate branches on the cut place, the more branches of the top, the more branches, and the more branches will naturally explode.

7. Preventive diseases and insect pests: Few pests and insect pests.The aphids in spring are one of them. Wiped it in time or spray 1500 times oxidative music to kill; mites in summer and autumn are second, and 1000 times trichlosterol may be killed.Pay attention to ventilation and increase the humidity of the leaf surface to reduce infection mites.

8. Breeding: The succulent beads can be cut and breed, and the branches are very easy to take root. You can cut a few sections in spring and autumn. Half are buried into the sand or loose soil, keeping moist but not accumulating water, and you will quickly take root for planting.

precautions for the breeding of polyphonic beads

1. From March to December each year is the growth period of the plant. There is a short half dormant in summer. If the light is less likely to grow long, the stems will become fragile, and the spacing between the leaves will be opened for a long time.In plants that grow in full sunshine, the plant types are stubborn strong, the leaves are full, and the spacing of the leaves will be relatively close.

2. Keep the soil slightly wet to avoid stagnant water during the growth period.The soil can be mixed with cornography and a small amount of perlite, with a ratio of about 6: 3: 1.

3. Keep as much as possible in winter as much as possible, otherwise the temperature is too low to be frostbite and die, which is less resistant to frost.When the summer temperature exceeds 35 C, the entire plant will grow slowly.At this time, watering should be reduced to prevent rotten rot from the root of the pot soil.And strengthen ventilation, appropriate shades, avoid the sun exposure.

4. Avoid long -term rain during cultivation, otherwise the stems will be rotten.

5. The Buddha beads are still relatively fast. It is almost the same for changing the pot in 1 to 2 years. The pot is changed before watering in the first spring.The Chairman of the Buddha has a lot of branches.Breeding can cut the long section directly. The cuttings are very simple. Take a section of the healthy Buddha bead and cut the dry wound cuttings in a slightly humid sand soil. You can also put it directly on the soil surface.

[Polynuts and immortal birds] How to raise succulent birds with unbelievable birds in wide leaves

Living habits of succulent unbeatable birds

Broad -leaf non -dead birds are like light and water, especially when the number of watering times in the summer should be reduced to prevent rotten roots.

The sun is full of warm and humid environment, which is more resistant and cold -resistant. It is suitable for growing in acidic soils with good drainage.Drought resistance.Frequent fertile sandy loam with good drainage.The growth temperature is 13 to 19 C, and the temperature in winter is 7-10 C.

The cultivation skills of succulent undead bird

Broad -leaf undead bird has strong adaptability and extensive cultivation management.3 parts of rotten leaf soil and 1 mixed cooperation substrate can be used in potted plants.The new seedlings of the newly pot must be topped in time to promote branches; for the older plants, the stems are semi -woody, off their feet, and do not stand up. The ornamental value is reduced.

Broad-leaf immortal birds usually have to water and then pour it. Fertilization does not need to be too diligent, otherwise it will cause prosperity and may cause plant rot. It can be applied 1-2 times a month in the growth season.summer should be shaded slightly, and there should be sufficient light in other seasons, otherwise the color of the leaves will disappear.After the autumn is cold, watering should be reduced. After the room temperature is entered in winter, it can be overwinter as long as the room temperature is kept above 0 C.But the pot soil home is slightly moist.

The broad -leaved birds are slightly watered during the long term, keeping the pot soil moist, but cannot accumulate water.The temperature of autumn and winter decreases, and watering should be reduced.Blossom in winter and strictly control watering, but don't forget to water.Fertilize once a month during the growth period.When the stems and leaves grow too high, we should get rid of the plant shape and promote the many branches.Update the pots in spring every spring to maintain a beautiful plant state.

The method of breeding of succulent birds

Broad -leaf immortal birds are commonly used for cuttings, indefinite buds and sowing.

1. Cuttings

Broad-leaf immortal bird cuttings are the best in May to June. Put strong blades on the sand bed and stick tightly with sand to keep the humidity.One week after insertion, small plants can be made from the lack of leaf margins.After it grows, cut into the pot.

Put the branches, cut the top branches at 8-10 cm long, insert a sand bed after drying, start rooting after 1 week, and can be potted after 2 weeks.It is easier to breed the buds, and the growth of the leaf margin can be directly pelvised.

2. Unexpected buds

There are many small buds on the large leaves of the undead bird. Remove the large uncertain buds on the leaves, sprinkle on the farming soil, spray appropriately, and the cool ventilation will basically grow up. It can be carried out throughout the year.

3. Sowing

The seeds are small, and the soil is not covered after sowing, about 12-15 days, and the germination rate is very high.

4. Diseases and insect prevention

Broad -leaf immortal birds mainly have gray mold and white powder disease. It can be sprayed with 1000 times liquid of 70%methacotobettus wettable powder.For the harm of the sental insects and aphids, it can be sprayed with 40%liquid lotus oil.

Brief introduction to the fleshy bird

Undead birds, also known as flowers butterflies, take root.Sedow Koga blue dish.Native to Africa.

Undead bird, perennial meat quality herbal.As the name suggests, it has a strong vitality, and it can survive all places with soil.Its leaf long spindle -shaped, thick meat, raw, dark green with beautiful brown lines, especially the chic leaves are jagged, and the buds will grow on the side of the teeth, just like the two sides of the leaves are neatly stopped neatly.The two rows of small "butterflies" are interesting. These uncertain buds are easy to fall off, and they will grow into new seedlings on the soil. Once they are planted, they can breed themselves.In winter, red bell -shaped flowers, umbrella -shaped inflorescences, flowers have a long life.

Undead birds have strong habits, easy to plant, are not strict with the cultivation soil, and potted containers are relatively casual.Several seedlings are planted in small Flower pots to create tropical coconut landscapes.Immortal birds are full of sunlight, warm and humid growth environment, and are more suitable for planting outdoors. In winter, it can resist low temperature at low temperature in the short -term freezing point, severe freezing and snowy days. It should be moved to the room immediately.If it is placed in the room for too long, the plants will be weak and weak, poor growth, and affect the ornamental effect.

The spots of the immortal bird-the immortal bird brocade, the stems and leaves are all pink halo, and the seedlings born of the leaves are even more bright and charming, but because most of the seedlings lack chlorophyll, once they leave the mother plant, they cannot grow into a new ones.Plants.Breeding ability is not good.

The similar varieties of the undead bird are "Jin Die". The leaves are slender and round -like. The surface of the leaves is green with purple brown spots, and the stems are thin.EssenceOpen orange -red bell flowers in winter."Undead birds" of Polymony Observation

The maintenance experience of not dead birds

The genus of Meridiaca blue vegetables is also called the rooting roots and the immortal bird (there are many varieties of undead birds). As the name suggests, it is not easy to die.Big leaves are not dead birds are perennial meat -quality herbaceous plants.Stems stand upright, cylindrical, Smooth hairless, hollow.The leaves are raw, the leaves are rod -shaped, and the tip of the leaves has irregular jaggedness. The director of the gap has a small plant -like sprout.The inflorescence is cone -shaped, the corolla bell, rolled slightly outward, the flower is pink, and a small amount of drooping will be upward. The flowering period is from December to April.Like warm, humid environment, requires sufficient sunlight, good ventilation, and cold tolerance. It cannot be lower than minus 2 degrees in winter. It is best to keep 0 degrees or more. This temperature is relatively large.The small buds and tiny seedlings of the rod leaf falling birds can bear minus 5 degrees under the dry pot soil and will not freeze to death.It may be related to the moisture carried by their blades.

After experiments in the sun room, large plants below zero will frostbite, and the leaves are frozen -shaped. After the sun comes out, the leaves will slowly turn white and wither.Undead birds do not require much requirements for the soil, breathable, and ordinary vegetable garden soil can be raised very well, not as difficult to raise.Breeding can be cut with cuttings, or the larger uncertain buds on the leaves can be removed. It can be sprinkled on the farming soil. Spray appropriately. The cool and ventilated will basically grow up.The more light the light, the more beautiful the plant, and the compact leaves.Bange leafless bird is very resistant, and it will not die without giving water for 1 month.

Multi -fleshy non -dead bird breeding method

Undead bird is an alias of the plants of the Sedotae plant rods. The rooting is a succulent plant in Jingtian family. There are very many varieties, but the breeding methods are basically the same.Undead birds like warm, humid, sufficient sunshine, and good ventilation. It is best to keep the temperature above 2 degrees in winter, and it can be safe and winter.The small bud seedlings that have been rooted on the ground can also survive when the pot soil is dry. It may be related to their own leaves that are rich in moisture.It is not cold -resistant to landing. Large plants below zero will be frostbite, and the leaves are frozen and frozen. After the sun comes out, it will become white and withered.The rooting root has no requirements for the soil. As long as it is ventilated and breathable, the soil in the general vegetable garden can also be kept well.The reproduction method of undead bird is cuttings. Take the larger uncertain bud from the leaves and sprinkle it on the farming soil.

The landing root is a succulent plant in the family. There are many varieties, but the breeding methods are basically the same.Undead birds like warm, humid, sufficient sunshine, and good ventilation. It is best to keep the temperature above 2 C in winter, and it can be safe and winter.

Roots: The small bud seedlings falling on the body can also survive when the pot soil is dry, which may be related to their own leaves rich in moisture.It is not cold -resistant to landing. Large plants below 0 C will be frostbite, and the leaves are frozen and frozen. After the sun comes out, it will become white and withered.

The rooting root has no requirements for the soil. As long as it is ventilated and breathable, the soil in the general vegetable garden can also be kept well.The breeding method of undead birds is cuttings. The large uncertain buds are removed from the leaves, and it can be sprinkled on the farming soil. Proper spray is performed, and it will grow up when placed in a cool vent.The more feet the light grows, the better the growth of the plants, and the compact leaves.Undead bird is very resistant to drought, and it will not die without watering for a month.

  1. 1
  2. 2