1. The advantages of the LED Solar Lamp Tube

ledThe fluorescent lamp Tube is the same as the traditional fluorescent lamp Tube in appearance, and the length is available.60cmand120cmAs well as150cmThree types, their power is respectively8WAs well as9WAs well as10WAs well as12WAs well as15WAs well as16Wand20W,and60cmThe actual power consumption of traditional fluorescent lamps is26W,,120cmThe actual power consumption of traditional fluorescent lamps is45WItemsledThe fluorescent lamp Tube only has traditional lamps40%It is an efficient and energy -saving lighting product.

advantage:

1. Environmental protection lamps to protect the earth

The traditional fluorescent lamp contains a large amount of mercury steam, and if it is crushed, it will volatilize into the atmosphere.However, the LED sunlight does not use mercury at all, and the LED products do not contain lead, which plays a role in protecting the environment.

2. Efficient conversion to reduce fever

Traditional lamps produce a large amount of thermal energy, while LED lamps are converted into light energy, which will not cause energy waste.And it will not produce the phenomenon of degradation for files.(This sentence requires professionals to adjust. LeD will also produce heat, and heat will cause LED light decay, so it is necessary to strengthen the heat dissipation function of LED lamps)

3. Quiet and comfortable, no noise

The LED lamps do not produce noise. It is the best choice for the use of precision electronic instruments.Suitable for library, office and other occasions.

4. The light is soft and protects the eyes

The traditional fluorescent lamp uses 220V AC power, so it will generate 100-120 times per second.The LED lamps directly convert the AC power to DC power, which will not produce flashing and protect the eyes.

5. No ultraviolet rays, no mosquitoes

LED lamps do not produce ultraviolet rays, so compared with traditional lamps, there are fewer mosquitoes around the lamp.The room will become cleaner and neat.

6. Voltage range: 80V -245V

The traditional fluorescent lamp is lit by the high voltage released by the rectifier, and it cannot be lit when the voltage is reduced.The LED lamps can be lit within a certain range of voltage, and the light brightness can be adjusted.

7. Save energy and live longer life

The power consumption of the LED fluorescent lamp is less than one -third of the traditional fluorescent lamp, and the life span is also 10 times that of the traditional fluorescent lamp. It can be used for a long time without replacement, reducing labor costs.It is more suitable for difficulty in replacement.

8. Strong and reliable, long -term use

The LED lamp itself uses epoxy resin instead of traditional glass, which is stronger and more reliable. Even if LED is smashed on the floor, it will not be easily damaged and can be used with confidence.

9. Simple installation

During the installation, remove the original fluorescent lamp to the LED fluorescent lamp, and remove the ballast and the ripplane.

two,LED fluorescent lamp energy saving effect

15WLEDThe brightness of the sunlight is more than the traditional40WThe sunlight is still bright,18W LEDThe fluorescent lamp is more than traditional64WThe sunlight is still bright,ledThe brightness of the sunlight is particularly softer and easier to accept.Life life5Ten thousand-8The power supply voltage of 10,000 hours isAC85V-260V (comminicateCureThere is no need to start with a gifted device, start fast, small power, no flickering, and not easy to see fatigue.It is not only super strong and energy -saving.It is one of the products developed by the National Green engineering and is the main product to replace the traditional fluorescent lamp.Low power consumption, saving60-80%Electricity is better than traditional fluorescent Tube.

three,ledfluorescent lampScope

It is suitable for most indoor lighting applications, such as family, hotels, shopping malls, office spaces, schools, parking lots, warehouses, factories, supermarkets, channels, corridors, advertising boxes and other indoor lighting.

Four, LEDLight lamp wiring diagram

1. There are two types of wiring methods for traditional fluorescent lamps: electronic zone, inductive town flow.The wiring diagram is as follows:

2. LED fluorescent lamp Tube wiring method: Remove the tingler and (or) gobinial device, and connect the fire line and the zero line to both ends of the bracket, as shown below:

installation instructions:

1. Remove the Qihui and rectifier, and connect the city's fire lines and zero lines on the left and right ends of the bracket respectively.

2. The LED lamp Tube is a built -in power supply, the G13 interface has a short -circuit state, and the interfaces of both end are consistent.

1. design instructions for landscape street lights

Landscape art lamps are indispensable parts of modern landscapes. It can not only provide Outdoor photos, but also have high ornamentality. It uses different shapes, different light colors and brightness to create landscapes.The landscape street light design should follow the following points:

1. Choose the right position

Landscape street lights are generally set at the entrance and exit of garden green spaces, squares, and transportation roads. The traffic on both sides of the garden road and intersection, steps, surroundings of buildings, water view Fountains, sculptures, lawn edges and other people need lighting or can be with the landscape environment.Combined with a unified area.

2. The illness should be coordinated with the environment

The brightness selection of Landscape lights should be appropriate, such as entrances and exits, squares and other people's streams, and require sufficient lighting intensity; while walking trails and other roads do not require too bright lighting. soft and relaxed Lights will make the environment more quiet, comfortable, kind, and kind.pleasant.Of course, the overall landscape street lights must form a unified layout to ensure that the light illuminance is evenly and undulating, with the artistic effect of a bright and dark rhythm, and prevent the dark corner without light.

3. Choose the right street light height

The height of the landscape street lights is appropriate. Generally, the height of ordinary Landscape lights is about 3m, and the space Landscape lights with large people are higher. Generally, it is advisable to be 4M-8M.Ensure uniform illumination.

How to installLandscape lamp

1. Circuit, steel pipe layout

The design is designed to use the wire Tube and the steel pipe dark application. The construction shall be carried out in accordance with the construction process standards of the wire pipe and the steel pipe laying project. The embedded pipe should be closely cooperated with the civil construction construction.The line uses a cable to be buried in the HDPE Tube, and the pipeline is buried by 0.7m. All line branches should take reliable waterproof measures.

2. Thread

The wires selected in the Tube must meet the design requirements, and there is a factor -issued certificate. Check the insulation resistance, the diameter diameter of the wire, the material and the weight of each volume to meet the requirements before it can be used.The Tube should be carried out after the construction structure and civil construction construction operation. Put the line first. Note that the wires of the same communication circuit must be worn in the same Tube. Different circuits, different voltage and communication and linear wires must not be penetrated into the same Tube; thenClean pipelines, switch boxes, socket boxes, etc.

3. lighting installation

The installation of Landscape lights should check whether the lamps meet the requirements according to the installation venue. Check the wiring in the Lights. The installation of the lamp must be firm, the position is correct, neat and beautiful, and the wiring must be correct.After the installation is installed, the insulation resistance is detected and Running after passing the insulation resistance.

4. Ground protection and safety measures

Set up a closed ring artificial grounding device around the Outdoor lighting box, 5m spacing, 0.8m buried depth, and not more than 10 ohms.To prevent lightning strikes from over -voltage, a first -class surge protector is set in the Outdoor lighting box.