Articles in Tags waterproof

Introduction to waterproof fabric

waterproof fabric is a new type of textile fabric, which is made of polymer waterproof and breathable material (PTFE film) plus fabrics with fabrics.The main functions of waterproof and breathable fabrics are: waterproof, humidity, breathable, insulation, windproof, warmth.

In terms of production technology, the technical requirements of waterproof and breathable fabrics are much higher than ordinary waterproof fabrics.At the same time, the quality of the waterproof and breathable fabric also has the functional characteristics that other waterproof fabrics do not have.While strengthening the dense and water density of waterproof and breathable fabrics, its unique breathability can quickly discharge water vapor inside the structure, avoid the structure of the structure, and keep the human body always dry.The problems are a new type of fabric of healthy and environmentally friendly.

Real waterproof fabrics can also be able to withstand water seepage pressure in a humid climate and environment for a long time, and do not seep water.For example, walking outdoors for a long time, Kneeling or sitting on a humid ground, will not seep water.

How to wash waterproof clothes

All E-PTFE film clothing can be washed.There is no permanent waterproof performance loss after washing. The surface DWR dialing function is lost and it can be simply repaired.

1. The waterproof fabric is more resistant to dirt. Add some detergent in the water. After soaking for 10 minutes, use your hand for a few minutes.Just dry it.

2. The blue cloth stained with vulcanized fuel, the adhesion of the general color is relatively strong, but the abrasion resistance is poor.Therefore, it is best to soak in the detergent for 15 minutes, rub it gently with your hands, and then rinse with water.Don't rub it with a rubbing plate, so as not to be white.

3. The green cloth made of oxidized fuel is generally strong and shiny, but it is easy to green when it encounters gas such as gas.Therefore, don't put the washed green cloth clothes on the stove.

4. If waterproof jackets are waterproof fabrics with coatings, they generally do not need to be washed frequently. When it is not too dirty, scrubbing with a humid and humid towel.Wipe it a few times and twist the towel again, and then scrub it repeatedly.If the inside is also dirty, you can use hand -washing method to put it in the bathtub, more warm water, detergent or meals, and grab a lot of washing.Then completely overwhelm the foam water, and finally put it in the washing machine to dehydrate.

precautions for waterproof clothes washing

1. You need to pull your waterproof jackets, buckle buckles, stick magic stickers, and restore the wind rope on the stretching hat -otherwise it will cause the fabric to distort.

2. Do not add a softener -the soft agent may cause the gel barrier, the fit film, and the lining to get rid of it, and the clothes are scrapped. Even if it is not so serious, the production of bubbles is inevitable.

3. Do not use hot water and warm water -waterproof clothing is afraid of high temperature.

4. Usually the drum is better than the wave wheel, and the wear and tangling of clothing are less, but it is not necessary.

5. Do not dry it. The waterproof fabric lining has a quick drying nature, and it does not absorb a lot. It does not take any effort if it is Hanging to dry. Do nt harm it with strong centrifugal force.

6. If you cannot determine whether the washing fluid used contains a soft agent (mostly), use the material such as washing powder and washing agent to wash.

Disclaimer: The above content is derived from the provision of the program system index or the sharing of netizens. It is for your reference only and does not represent the research perspective of this website. Please pay attention to the authenticity and authority of the source of the content of the content.Apply to delete & gt; & gt; error correction & gt; & gt;

How to use different moisture -proof pad products

1. Inflatable moisture -proof pads

The inflatable moisture -proof pads are in various moisture -proof pads. It is the most comfortable and soft product to use, but be sure to pay attention to the use method, otherwise, if you are not careful, the moisture -proof pads that are full of gas may be leaked.Effect.

First of all, before use, you can use your mouth or aerated cylinder to blow or cheer the inflatable holes in the center of the moisture -proof pad. The automatic inflatable moisture -proof pad only needs to pull out the air mouth.After the moisture -proof pad is gradually full, put it flat on the flat ground, sit on the moisture -proof pad to check whether the air leakage. If the air leakage, after finding the air leakage, use a special tape for replenishment, and place it for 24 hours to ensure the moisture -proof pad repair and supplement.success.After the Camping is over, after the moisture -proof pad is put, roll it carefully and put it in the Camping set to prevent scraping.

2. Aluminum film moisture -proof pad

The moisture -proof cooker principle is mostly because the direct contact and heat transfer of the human body and the ground are isolated.If the human body is lying directly on the ground, it will feel cold after a while, and the moisture -proof pad can make the human body from exchanging calories in the ground. This is particularly obvious here.

The usage of an aluminum film anti -moisture -proof pad is very simple. Campaigns can be used to spread the side of the aluminum -proof moisture -proof pad aluminum film in the Tent or grass, which can be the most effective to separate the direct contact and heat transfer of the human body and the ground, so that the human body can make the human bodyKeep your body temperature and healthy entertainment activities in the Camping at night or long time.

3. Foam -type plastic moisture -proof pads

This traditional moisture -proof pad is actually the most simple and practical. First of all, there is no need to worry about the risk of leakage like an inflatable moisture -proof pad. Secondly, there is no need to worry about the front side of the placed.Worried about being scratched and damaged, you can use it at any time and store it at any time, which is very convenient.

When a campers are on the grass, or in a Tent, you only need to place the foam -type plastic moisture -proof pads on the flat ground, that is, the short -term human moisture -proof and isolation of the ground cold air can be ensured.

There are also many other types of moisture -proof pads. The method of use is basically close to the above three types. You only need to use it according to the instructions.These small details are valued, which can greatly improve the use of tide -proof pads.

What are the precautions for Outdoor moisture -proof pads

1. It is best to use the Outdoor moisture -proof pads together, so that it can reduce the wear during exercise and extend the service life.

2. In order to extend the service life of Outdoor moisture -proof pads, please do not fold it, just roll it and save it.

3. During the travel process, the moisture -proof pad is generally hung outside the Backpack.

4. Automatic inflatable moisture -proof pads should make it automatically inflatable. Do not use mouth to replenish qi. The water vapor in the mouth will affect the service life of the moisture -proof pad.

5. When using Outdoor moisture pads, the ground should be flat. After removing debris such as stones and branches on the ground, spread the moisture -proof pad to avoid damage to the moisture -proof pad.

6. Most of the materials for moisture -proof pads are flammable. Pay attention to fire prevention. Do not use stoves, smoke, etc. on it.

What does mean

The clothing is the workers that are not easy to rot (folk called coriander) woven into a thick rainplay like clothes that can be worn on the body like clothes. Later, people were made of brown after brown.

Introduction to Yiyi

The coats are generally made into two pieces of tops and lower skirts. The buckets worn on the body are used to cover the rain.It is widely used in Jiangnan, Japan, South Korea, Vietnam and other places. This rainware is very convenient to wear on the body.The appearance of chemical fiber products in the 1970s ended its historical mission.

The clothing is sewn with brown slices, and the brown slices are not permeable. They can be worn.It can not only cover the wind and rain, but also cover the ugly.In the old society, the poor family. The eighteen -year -old girl had no pants to wear, and she had to use her clothes to cover her ugliness and shelters.Those who wear clothes are used to make rainy fixtures.The clothing is the raincoat generally used by people in the old society, and it is inseparable from it.When hunting, it is the best "protective suit".The name is old -fashioned, and it is woven like a clothing Tool called "Cao Cao".The name of the Yi Yi came from this.

History of

The clothing is a rainproof utensil that is worn on the body with grass or tree brown tie.Jidong's clothing (pictured) is mostly woven with grass, and is used to "editing " and weaving.

The clothes are long in history."Poetry Xiaoya": "Er Mu is thinking, He is He and He." "Chuan": "Well, so prepare rain;It shows that in the spring and autumn Period, people knew that they used clothing to prevent rainfall and sunscreen.During the Tang and song dynasties, the poets also mentioned the clothes in their verses, such as Zhang Zhi and "Fisheries" in the Tang Dynasty: "Green , green clothing, and the drizzle of the winding wind.""The lonely boat is weng, fishing alone in the Hanjiang snow alone." Su Shi "Fisherman" in the song Dynasty: "From the shelter in a green cricket, and the green coats everywhere."" " is a rain -proof Tool.The southern coat is woven with the fiber of palm tree leaf sheath, so it is also called brown pupa.

In the past, the clothing was a must -have for farm (fishing).The agricultural activities of the year are mainly spring, summer Tube, and autumn harvest.Xiaqiu two seasons are the busiest, and the rain is the most.The farmer's proverb said: "spring fights, during the summer competition", in order not to violate the farmer, crop people often wear rain in the farmland in the farmland.

The weaving method of the coat

Step 1: Collar shaping

Weaving the coat starts from the neckline. The neckline should be arranged 15, 6 brown leaves, sewing the neckline with a brown lock, and then shaping the neckline., Make the collar of the coat soft, more comfortable to wear.

Step 2: Positioning

The positioning of the clothing first wears the needle and then leads the lead.To make a modern, choose a brown -length brown piece to make the mold.The whole coat seems to be a big butterfly. The two wings are slightly tilted, and the Bone is made into a round neck in the middle.Putting on his body, no matter how heavy the rain, it will not make people wet.The coat is divided into two parts of the skirt and the lower skirt. The skirt is 3 feet wide and 2 feet long. The shape of the lower skirt is like a "horizontal axis", more than 3 feet wide and 1.8 feet long.There are two pieces of skirts on both sides of the "horizontal axis", as your mind, hang down from his chest, and surround the lower legs.

Step 3: stitching

The production of the coat is mainly stitched. It will be stitched with brown lock shoulders, chests, and skirts. The clothing is sewn. Generally, 80-90 is sewn.The spacing inside is large, the sparse line spacing is about 1 inch, but the surface suture is dense and there is no distance.It takes about 2 days to make a piece of clothing.

The manufacturing process of Yiyi

1. Preparation

Cao Cao, also known as Dragon Fragrant Cao, grows in a humid zone in ditch, ponds and rivers along the river.Futian cuts it to dry it on the flat ground.If it is dried jellyfish, spray a little saline water when used, so that it will be soft and then edited.Cut the grass in autumn is easy to fold and cannot be used.In addition, we need to prepare a 5.5 -foot to 6 -foot fine line hemp rope.

2. Weaving (beginning)

The wounder folds the pre -prepared thin rope into double shares, and the fine rope is temporarily fixed at both ends of the string.Starting from about 10 cm from the discount, take a grassy grass (4 to 5), and the roots are facing the top and the wounds in the middle of the thin rope and the wound.Fold the fine rope outside, bypass the lower half of the grasshopper from the bottom, press the upper half of the grasshopper lying outside, and fold the folding in the middle of the two thin ropes on the right side of the grass.Take another grass, and tighten the right side of the upper grass. Use the same method to fold and press in the middle of the two thin ropes.The positions inside the two thin ropes cannot be replaced.This is about 46 cm width of about 46 cm continuously to about 46 .The lasting method of the grass is slightly different from the front editing method. After the folding and winding, the lower half of the grasshopper is sandwiched into the middle of the two thin ropes on the left side of the winding part.In this way, the grassy salamander in the end will not be dispersed.At this point, this double -stranded rope formed two layers of grasshoppers inner and outer, the root is the outer layer and the tip of the tip, and the outer layer of grasshopper has a row of crossed patterns.The rope woven 46 grass, forming the "neckline" of the coat.

3. Zengye

After starting the good head, adjust the gap between the grass evenly and approach it moderately, and start the renewal.The neckline can continue to hang, or you can take off the flat ends and fix it for easy weaving.Some hang the "holes" in the animal's "holes" down, and the double -stranded thin rope is surrounded on the hoop.When adding a lot, the Hanging pattern is facing outward, and the flat is placed on the bottom of the palaces.Taking Hanging and starting from the left as an example, the first and second grass are a combination, take a grassy grass, the root tip is upside down (the same below), sandwiched on the two crooked grass 2 cm from the thin rope, and the left end of the left end.Fold outward, pinch the grasshopper below, and pass through the middle of the two cymbals horizontally, forming a "well" word that is pressed in sequentially.Fold the right end of the word "well" to the top left, entangle the right vertical, upper horizontal, and wear it from the middle of the word "well" to tighten, forming a cable buckle.Then the 3rd and 4th grass is a combination. The same method continues the grass, and the folding is wrapped to form a cable.In this way, 32 cable buckles are formed, and 64 grass is thrown out.

From the second row, adding rows is equivalent to weaving sweaters and needles.The first is divided into two on the left, and the grass is clamped in the middle.Then the 2nd and 3rd are a group of wounds, and weave it in turn.Finally, the 64th grass is divided into two, and the compilation of the first .This row forms 33 cable buckles, throwing 66 .At this point, a row of diamond patterns are formed.In this way, each row is made, 1 more cable buckle, and 2 more grass.In this way, more than 10 rows of rows, the length of the clothes is super chest, and the spacing of each row of cables can be gradually extended appropriately, so that the outer layer's grass overlapping length decreases.

4. Close edge

The closing edges can be used from the left and right, and the two sides are thrown on each side. The two are adjacent to the two combinations.No longer increased, a row of cable buckles are reduced by 1 than the previous row, so weave 2 to 3 rows.The well -edited coats are inside the layers of orderly rhombus "mesh eyes", and the outside is stacked from top to bottom layer.Inside the "Internet Eye", the grass layer was facing the body, and the rope line was tied to the neck, which kept warm and rain. is the ideal rain gear of farmers in the past.

The future of

With the changes of the times and the progress of society, after the 1960s, clothing was gradually replaced by plastic and plastic Raincoats.Raise clothes are rarely seen in people's daily life.However, compared with the new material raincoat, the advantages of the coat are irreplaceable.The first is good breathability and panicked.The second is to feel free to move, and there is no feeling of hinders.The third is to keep the wind warm.The disadvantage is that it is relatively bulky, and it is more suitable for stability work and entertainment such as rowing and fishing.When it rains, you can also spread it on the ground, and people sit or lie on it.fishing enthusiasts, put on clothes on rainy days, put on the campaign basket, sit on the pond or the edge of the river, sit and sit on the pond or the river. Feel "the oblique wind and drizzle do not need to return", don't have some fun.

Today, the Yi Yi has left our lives. Only those who have been sheltered by it will still remember it.

Disclaimer: The above content is derived from the provision of the program system index or the sharing of netizens. It is for your reference only and does not represent the research perspective of this website. Please pay attention to the authenticity and authority of the source of the content of the content.Apply to delete & gt; & gt; error correction & gt; & gt;

raincoat The difference from the rain piping

Rainy coat is a rainpost clothes made of waterproof fabric.The waterproof fabrics suitable for Raincoats include tape, oil cloth and plastic film.Modern raincoat waterproof fabric focuses on breathability, commonly used such as special nylon and GORE-TEX.The breathable raincoat is conducive to people scattered from the raincoat when wearing rain -resistant water and heat, increasing comfort.

Rainy clothing is a product extended from raincoat. It is a rainproof clothes made of waterproof fabric. It is open and has no sleeves.The waterproof fabrics applied to the rainy meseped include tape, oil cloth and plastic film.Modern rain-water waterproof fabric focuses on breathability, commonly used such as special nylon and GORE-TEX.The breathable rainfall is conducive to the humid and humid water when wearing rain -proof when it is wearing rain coats to increase comfort.

Simply put, the rain wear also belong to the raincoat. The rain wess is only a kind of raincoat, but it is just different styles.

Rainy flides are generally used by bicycles, such as electric vehicle rain, bicycle piping, and motorcycle rain. According to the style, it can also be divided into open rain pins, Sleeve rain pins, etc. The general production method of rainy floods is relatively simple, so the cost is relatively low., But the people used are widely used.

Nowadays, the style of raindrops is also diverse, but it is basically the protection of the head of the head. There are Raincoats, helmet -style Raincoats, and so on, so the rain wess is getting better and better.

Rainwear and rain ponchi is a must -have for rainy days. As the saying goes, there are unpredictable winds, so we must also be prepared. We don't have to think of buying rain pits in the rain when it rains.

Split in the cycling raincoat Good or one -sided raincoat

The conjoined raincoat is very good, but the disadvantage is heat and stuffy.

The split raincoat is not hot, and it is convenient to wear it, but waterproof is not as good as connecting.

Disclaimer: The above content is derived from the provision of the program system index or the sharing of netizens. It is for your reference only and does not represent the research perspective of this website. Please pay attention to the authenticity and authority of the source of the content of the content.Apply to delete & gt; & gt; error correction & gt; & gt;

1. What are the factors that affect the waterproof performance of street lights

1. Ultraviolet

Ultraviolet rays have damaged effects on the insulating layer of the wires, shell protection coatings, plastic parts, sealing glue, sealing rubber strips, and adhesives exposed to the street lights.

After the insulation layer of the wire is cracked, the water vapor will penetrate the inside of the lamp through the gap of the wire core.After the lamp shell is coated with aging, the coating of the edge of the shell will crack or strip, and there will be gaps.After the adhesive gum aging between the electronic sealing collagen, the sealing glue strip, and the structural parts, the adhesion, deformation, cracking, and the gap will also be reduced in order to reduce the waterproof performance.

2. High and low temperature

The temperature of the Outdoor daily changes greatly. The surface temperature of the summer lamps during the summer can rise to 50-60 C, and it will fall to 10-20 C in the evening. The temperature of the ice and snow in winter can be reduced to zero, and the temperature difference between the year will change greater.Under the high temperature environment of Outdoor street lights, materials will accelerate aging and deformation.When the temperature drops to zero, the plastic parts become crispy, and it may crack under the pressure of cold air.

3. Hot expansion and contraction

The shell of the outdoor lamps will cause thermal expansion and contraction due to changes in temperature. The lineflation coefficients of different materials will be different. The two materials of glass and aluminum profiles will displacement at the combination.The process of thermal expansion and contraction is continuously repeated, relative displacement is repeated, and the air density of the lamp is greatly damaged, the gas density is poor, and the waterproof performance is greatly reduced.

2. How to deal with Outdoor street lights and waterproof

At present, Outdoor street lights are mainly divided into two major directions: structural waterproof and material waterproof. Structural waterproof is to improve the structural protection performance of the lamp body and enable it to cope with the harsh Outdoor environment.The position of glue density electrical components is used to prevent waterproof with glue material during assembly.The treatment method of Outdoor street light waterproof treatment is specifically:

1. waterproof waterproof at the imported line hole

The entry and exit line of Outdoor street lights is the easiest place to enter the water. Therefore, the screws and nuts of this part must be tightened in place. The entry and exit cable cannot be easily pulled out. You can use the Gaza Belt, glue and other methods to be fixed.If the lamp is buried underground or in water, then it is allocated at the bottom. The occasions used are that the lamp body is more infiltrated by water, and the import line must be increased.

2. glass splitting waterproof

If there is a glass rubber ring, first fix the groove of the tank or rely on the edge of the lamp body or the light in the lamp to play a small amount of uniform waterproof glue to increase the squeezing and sealing of the rubber ring when the tightness is tightly locked;If there is no glass rubber ring, first in the glass gum, the waterproof glue is placed obliquely.

3. Cover the glue ring to fight screw waterproof

First consider the fixed rubber ring. Generally, the lamp body has no glue groove. The thickness of the rubber ring and the side of the screw hole is fixed first; if the lamp body has a glue groove, first play a small amount of glue in a circle in a circle.Fix the rubber ring first; for the lamp body with waterproof structural waterproof, it is also necessary to evenly beat some glue on the surface and side of the tape.

Disclaimer: The above method stems from the index of the program system or the sharing of netizens. It is for your reference only and does not represent the research perspective of this website. It proves that it is effective. Please pay attention to the authenticity and authority of the source of the content of the content.Apply to delete & gt; & gt;Correction & gt; & gt;