Profile

Turtle bamboo is a kind of perennial wooden vine climbing evergreen shrub. Al -alias Penglai banana, turtle back banana, and wire orchid are born in the forest and climbing trees.Stems are green, thick, Zhou Yan is ring -shaped, and the remaining petiole is green; the leaves are large, the outline is ovate, thick leather, bright surface, light green, green white on the back.The flames of the Buddha are thick, wide ovate, boat shape, near upright.The ears of the meat are near cylindrical and pale yellow.Storing flower silk linear.Pistol pyro -like, yellow, slightly raised.The berries are pale yellow, and the stigma is blue and purple spots.From August to September, the fruit matures after the flowering period.

Fujian, Guangdong, and Yunnan are cultivated in Luoyi, and Beijing, Hubei and other places are mostly planted in greenhouses.Native to Mexico, most of the tropical areas are cited for viewing.

Nickname

Penglai banana, iron silk orchids, hole Xilin taro, turtle back banana, wire orchid.

variety

1. Landal leaf turtle back bamboo

The oblique leaf turtle back bamboo is also known as the mini turtle back bamboo, which is a common type of turtle back bamboo.Its plants are small, slower, upright, and the leaf surface is green.It is often used as a small and small Hanging plant pot.The oblique leaf turtle is not very resistant to low temperature, and it is more like a humid and high temperature environment.

2. Multi -hole turtle back bamboo

The long -empty turtle is back, the leaves are green and the surface is Smooth, the leaves are long ovate, and the middle part to the edge of the leaves is oval or oval -shaped pores.Thin.

3. window -hole turtle back bamboo

The window hole turtle back bamboo, the leaf is long oval to the long ovate, compared with the multiple turtle back bamboo, the number of window holes is large, the outer edge of the window hole is closer to the leaf edge, the total area of the hole is larger, and the leaves are thinner.

4. Belly leaf turtle back bamboo

The spots of the turtle back bamboo are variants of the flower and leaves of the turtle.The leaves have large area of yellow and white lumps and spots, which are beautiful.

5. Long stem turtle back bamboo

The long stem turtle back bamboo is a variant of the turtle bamboo.The erectism is not as good as the turtle back, and the leaves are slightly smaller.

Suitable place

1. Put in the living room

Turtle bamboo is very good for Feng Shui in the living room, and approaching the blessing of wealth and continuous blessings.The oblique angle of the entry of the living room is generally the best Feng Shui financial position in the home. It is the best role in recruiting a wealthy town house from the perspective of Feng Shui survey.

2. Put in the study

The back of the turtle is mainly placed in the book, which will have career.However, remember that the turtle back bamboo cannot be placed on the desk, and it will affect the luck on the desk.Because the plant is relatively large and it is easy to fall, it is best to place it at the door of the study.If you want to help your children's academic and career, put a turtle back bamboo on the door of the study.

Effectiveness and role

View

The turtle -back bamboo leaf shape is strange and the hole is cracking, and it looks like a turtle back.The stem nodes are thick and like Luohan bamboo, dark brown gas root, and the vertical and horizontal intersect is like a wire.Its leaves are green and green, and the stems are thick. There are large crescent -shaped leaf marks in the festival. They have cable -shaped meat and root. They are extremely shade -resistant.

Purification

Turtle bamboo has the effect of absorbing carbon dioxide at night, which is very helpful for improving indoor air quality and improving oxygen content.It has the characteristics of priority adsorption of harmful gases such as formaldehyde, benzene, and tvoc. The absorption of formaldehyde back to a turtle bamboo is equivalent to the absorption of 10g coconut carbon. It achieves the effect of purifying indoor air and is an ideal indoor plant.

The leaf shape is strange, the hole is cracking, and it looks like a turtle back.The stem nodes are thick and like Luohan bamboo, dark brown gas root, and the vertical and horizontal intersect is like a wire.Its leaves are green and are extremely shadow -resistant. They are famous interior large potted leaves.

Edible value

The fruit taste is delicious, but it often has a hemp.After the fruit is mature, it can be used for cooking. It has sweetness, and the fragrance is like pineapple or banana.But pay attention to the immature fruits and not to eat, because it has strong irritation.Residents of origin called this fruit as "the beautiful fruit given by the fairy".

Breeding method

illumination

The back of the turtle is more shade -resistant, avoid scorching sun, likes to shoot light, and the sunlight will be burned. The color of the light too dark leaves will fade. In summer, the Flower pot can be placed in the north window, but the sun needs sufficient sunlight in winter.

Humidity/watering

The turtle -back bamboo is wet, the potting soil is kept dry without cracking, moisturizing but not wet. The air humidity is 60%. It should be sprayed and pour in the leaf surface every day in summer.Black spots appear or even black rot.

temperature

Turtle bamboo is warm and not cold -resistant. The suitable growth temperature is 15-25 C. When the temperature drops in winter to 5 C, it should be moved into the indoor warmth. The indoor temperature control can be safely overwinter between 15 and 20 C.

soil

Turtle bamboo is loose and well -drained soil. Put some hoofs and broken bones as base Fertilizers before the soil is placed.

Fertilize

The turtle back bamboo is a period of strong growth in April to September. Thin liquid Fertilizer is applied once every half a month. The growth period is 280 % or 370 % of nitrogen liquid Fertilizer once or so.Phosphorus and Potassium fertilizer make the stems stout and prevent falling.

Frequently problem handling

Breeding method

1. Sowing and breeding

Turtle-back bloom in summer. In order to improve the strong rate of seeds, artificial pollination is required. At 9-10 am and 3-4 pm at 3-4 pm, pollination is best, and pollination success is high.It takes 15 months to grant pollination to the seeds.Pay attention to ventilation and Fertilizer water management during the development of seed development to promote strongness.Put the seeds in 40 C for 10 hours before sowing. The sowing soil should be disinfected at high temperature.The turtle-back bamboo seeds are large and can be performed on demand. The room temperature is kept at 20-25 C after the broadcast. The plastic film is covered with the box.If the room temperature is too low during the sowing process, it will not only affect the emergence, but even water stain rotten.

2,Cuttance

Both stem cuttings can be used in spring and autumn, and the effect of cuttings is the best with spring from April-May and September to October in autumn.Because the temperature is suitable for the healing of the stem node, it is based on the living.Select the full stem tissue and grow strong side branches of the stem tissue. The cuttings are 20-25 cm in length. The leaves of the base are cut to keep the upper small leaves, cut the long roots of the long air, and retain the short gas root to absorb moisture, which is good for beneficialRoot.Put the mixed matrix of rough sand and peat or rotten leaf soil. After insertion, keep it 25-27 C and higher air humidity, and start taking root in about one month after insertion.After the cutting is rooted, the axillary buds on the stem knight also began to sprout the leaves. In order to accelerate the growth of the seedlings, the room temperature is kept above 10 C to strengthen the management of Fertilizer and water.If you need to suspend the embellishment, you can prepare wooden frames or iron shelf containers, packed palm Skin, put on fertile rotten soil, and planted it into a living turtle back bamboo as a suspension product.

3. Substitute breeding

In summer, the side branches of the large turtle beings are split throughout the section of the side branches of the Turtles, with some qi root, and directly planting in a wooden barrel or bowl.In 1980, Denmark used the top of the stems and thexillary buds of the turtle.The MS medium plus 10 mg/liter 6-liter 6-amino gonads and 2 mg/liters of cylinder, under 30 C, starting with wounded tissue and uncertain buds in 6 weeks.The buds are transferred to the mS medium with a triangle bottle of 2 mg/liter of percilline, and the root is induced at 4-6 weeks.

Prevention and treatment of pests and insect pests

1. Leaf spot disease

Common diseases for Turtles.Mainly harmful leaves.

Control method: Put in ventilation and bright places to promote ventilation and light and reduce the incidence.After the occurrence, it should be sprayed 600 times with 65%manganese -zinc wettable powder in time.For other prevention and control methods, see the prevention and control of the brown bamboo diseases.

2. Gray spots

Prevention method: Same leaf spots.

3. Sicatin insect

Frequent pests for Turtles.It is mainly to harm petiole and blades.

Control method:

Family maintenance can be gently removed with a toothbrush.

When there is a large amount, 40%oxidized carcass can be sprayed with 40%oxidized fruit emulsion.

The cause and treatment of yellow leaves

1. Soil issues

Reason: Turtle bamboo has a relatively developed meat root, so it has high requirements for the breathability of the soil. The more sticky soil will affect its breathing, which will cause its leaves to become yellow.

Solution: For the appropriate soil, you can use 2 copies of cooked loess, 1 part of honeycomb coal ash, and 1 mix of chicken manure into a mixed soil. This soil has a good breathability and can make it grow better.

2. Moisture problem

Reasons: Watering bamboo back bamboo should not be too much or too little. Both extreme watering methods will cause the leaves to yellow, and if there is a lot of water, it will cause rotten roots.

Solution: Watering on a regular amount, it is best to sprinkle water when the soil surface is dry, which can increase the humidity in the air.

3. Light problem

Reason: Too strong or too weak light will cause the leaves to yellow. Putting it in a cool environment for a long time will turn yellow, because it affects the photosynthetic effect.Of course, it cannot be placed in a place where light is too strong. It is easy to burn the leaves and cause yellowing.

Solution: When the sun is strong, you can cover it appropriately or let the astigmatism irradiation.

4. Temperature problem

Reason: The most suitable growth temperature of the turtle bamboo is 20-25 C, and the minimum temperature of the growth period cannot be lower than 10 C. Do not mature less than 5 C. If the temperature is too low, frostbite will cause the leaves to yellow.

Solution: When the temperature is too low, you can take some warmth measures appropriately. Be careful not to put it directly on the place where the air conditioner is directly blowing or the side of the heating.

precautions

1. During the growth of the turtle back, the plant grows rapidly and the cultivation space should be spacious, otherwise it will affect the stretching of stems and leaves, and it will not show the beauty of the leaf shape.

2. Turtle -back bamboo planting soil requires fertile and loose, water absorption, and good water retention. It is often best with rotten soil or peat soil.

3. The growth temperature of the turtle -back bamboo is 20-25 C, and the temperature of the seedlings at night in winter is not less than 10 C. The mature plants can resist 5 C for a short period of time, but frost damage is prone to occur.

4. Turtle back bamboo needs to be sprayed frequently in the summer to maintain high air humidity. The leaves are often cleaned to facilitate photosynthetic effects.

5. The juice of the Turtles is toxic, which has a stimulation and corrosion effect on the Skin.

What is the size of common beach chairs

1. The specifications of common beach chairs

It is mainly divided into 4 models, namely large, medium, small, special trumpets, with size from special trumpet to large numbers from 32*32*H56cm, 37*37*H62cm, 42*42*H68cm, 49*49*H75cm.

2. iron beach chair

iron beach chairs include two types of pure iron art and iron vine, because the metal itself has a cold feeling, which is very suitable for summer use.Lying in hot weather will feel cool and comfortable.Generally, the size of this beach chair is 180*77*76cm (length*width*height), but it is relatively large and cannot be folded. It is more suitable for use in the courtyard.

3. solid wood beach chair

solid wood is a very environmentally friendly material, and it is also the favorite of many people. It is usually 200*60*32cm (long*width*height). It is suitable for use in multiple places. Family courtyards, resorts, Outdoor, and companies can be used.

4. folding beach chair

The biggest feature of folding beach chairs is that it can be folded and easy to carry, and it is easy to store. After the folding, the weight is only about 6 kg. The size is 130*61*13cm (long*width*height), and some are smaller after folding.After opening, the size is 108*61*86cm (length*width*height), which can withstand 125kg weight.

5. Guifei vine chair beach chair

Because this kind of beach chair is better than ordinary beach chairs in appearance and comfort, it is relatively large in size and looks bulky.The external size reaches 180*60*90cm (length*width*height).This type of beach chair pursues a mood.

How can I buy the right beach chair size

1. The height of the lounge chair, the height of the lounge chair depends on the height of the chair. Except for the bar chairs, the height of the general chair is designed according to ergonomics, but the height of children's furniture is designed according to the proportion of children's height.

2. The deep exhibition of beach chairs is on the formal occasion, because the sitting posture of polite people is very correct, and can only be one -third of the chair.However, at the time of spare leisure, people like to lie on the chair throughout the body to feel the comfort of the chair in all directions.

3. The back of the lounge chair is height. For those who are sitting upright, you can choose a chair without a handrail or a lower chair with a lower handrail.Put the back completely on the back of the chair to be more comfortable, so we may have to consider the height of the back of the chair in this regard.

4. For lounge chairs with armrests, you must consider the height of the handrail when designing.The height of the handrail is proportional to the height of the back, not too high or too low.It is advisable to move around 20 to 25 cm.

5. Whether the lines of the beach chair are comfortable when they contact the human body and whether the softness of the mat is suitable. If the chair with a cushion or back is not attached to see if the structure of the lounge chair is healthy, whether the lines are Smooth, and try whether to lie down.

6. The stability of the lounge chair must not only talk about the lounge chair, but all chairs must consider the stability. We can see the stability of the entire chair from the details of the chairs, such as riveting.Go up and shake, and feel whether the chair itself shakes and whether the structure is stable and reasonable.

Does Decathlon sunscreen really sunscreen?

The sunscreen index and breathability of Decathlon sunscreen clothes are relatively high, and Decathlon's things are still very good in terms of workmanship. The clothes are rarely worse and unpredictable.

How to buy a Decathlon sunscreen jacket

1. Optical transparency

The main function of sunscreen is to resist ultraviolet rays. We can put sunscreen under the Lights to see their light transmittance.Those who are not transmitted are generally high sunscreen indexes and good quality sunscreens.

2. Material

In terms of texture, in chemical fibers, polyester sunscreen effects are the best, followed by nylon. The Sun protection effect of artificial cotton and silk is worse than that, while the effect of linen in natural fibers is the best.

3. Use

If you choose sunscreen, we mainly choose sunscreen according to the degree of sunscreen.The higher the sunscreen coefficient, the better the degree of sunscreen.

4. breathability

Because summer is relatively sultry, we better choose those who are breathable, and it will be more comfortable to wear.

5. color

The darker the clothes, the stronger the absorption of light.Light to white clothes, part of them are reflected and part of them will transmit it. Therefore, wearing white clothes will feel cool, but ultraviolet rays may transmit it on the Skin.When wearing black clothes, the light is basically absorbed. Although it is better to block ultraviolet rays, the price will feel hotter.This can only be said that everything is beneficial and disadvantaged.

6.

If the pattern of sunscreen is relatively loose, the general degree of Sun protection is general, and the effect is not very good.We'd better choose the lines more dense, and the degree of sunscreen is also better.

7. Tag identification

UV products should be marked with the following three aspects on the label: the number of this standard, that is, GB/T18830; UPF value: 30 or 50; UVA pass rate: less than 5%; long -term use and stretching or humidityIn the case, the protection performance provided by the product.

Decathlon sunscreen clothing recommendation & gt; & gt;

[Female basketball shoes match] How to match girls wearing basketball shoes with clothes and basketball shoes

AJ long version jersey

Girls wear long version of jersey. I heard that boys like them very much, full of sports style

Riri's long version of jersey with AJ is classic, AJ1 classic matching jersey is a perfect match

Riri is AJ fanatic, so she appeared again. AJ with shorts is the most cool

Capture a AJ fanatical powder, shorts with AJ3, handsome

The pink long skirt can also be paired with shoes, and it can also make a new height, take

Black jacket with AJ12FUSION is so handsome, the editor must be Kneeling

Black windbreaker with AJ3 White Cement full of rock wind full of rock wind, tie the profitable ponytail, perfect

The fanatical powder appears again, the red camouflage dress with a green camouflage jacket, and double AJ4

The whole body camouflage, no good figure, dare not hold, AJ1 red camouflage also looks good

one,tightsHow to choose men's size

1. Customers can choose according to their height: such as 150-160 wearing S.In addition to the height measurement method, customers can also choose according to the size of their different parts. Such measurements are more accurate and more comfortable to wear.

2. How to measure the waist circumference: The waist horizontal circumference of the waist level of the cord (OM) is standard waist circumference: waist circumference = 1/2 of the height of 19 cm (such as: standard waist circumference with 160cm height = 160cm /2-19 = 61cm)

Waistarbar converting formula: inches for centimeter -1 -inch = 2.54 cm (26 -inch x2.54 cm = 66 cm)

City inch change centimeter -1 city inch = 3.3 cm (2 city inch x3.3 cm = 66 cm)

3. Select the size according to the body: The tights generally have a good package performance, which can closely fit the body, highlight the human muscles, and show the beauty of men's unique shape.

Second, how to choose tight pants size

1. First prepare a soft ruler to prepare for the measurement.Use a soft ruler to measure the size of the hip and waist circumference, and choose the size that meets it.

2. Usually, tight clothes are one size smaller than ordinary clothes. This is very important.

3. Also, choose the model you want according to your preference.

4. Based on the seller's comment estimateclothingQuality.