1. What is a Ski stick

Ski sticks are tools we use to support forward, control balance, guide change, and support the body when skiing.Except for skiing, skiing and skiing in air skills, other items use Ski sticks, which is an indispensable Tool for Ski people to control the center of gravity.

2. What are the effects of skiing sticks

1. When the skiing board stands on the snow surface, the Ski stick can support the assistance to maintain a balance in time.

2. When the speed of the skiing board is not fast, it can be accelerated by struggling to support the Ski stick.

3. When the skiing board turns, the Ski stick is extended with the coordination of the Ski stick, and the point of the point is directed to promote the effective conversion of weight.

4. During the operation of mountain climbing and long -distance operation, skiing board plays a role in supporting and promoting.

5. When the skiing board stunts show, the Ski stick also dances with it to participate in the beauty of the beauty.

Third, how long the length of the Ski stick is appropriate

Generally, the length of the Ski stick is about 90-125cm. When skiing, it can be selected according to his height. The boy decreases 50cm with height, and the girl is reduced by 45cm with height, which is the applies to the length of the Ski stick.

When choosing, we should be based on light quality, not easy to discount, good balance, and suitable for our height.Generally, it is calculated from the snow wheel.You can pass through the leather bracelet.

Ski sticks are generally divided into alpine rods, off -road sticks and free Ski ballet sticks.Generally, the height of the elbow from the ground after the lower body is drooping as the length of the Ski stick.Beginners can choose a slightly longer Ski stick. After the technology is improved, choose shorter Ski sticks.

Fourth, how to use skiing sticks

1. Before or after the point of the point, you should control the hands holding the rod on the front and the outside of the waist.It is normal for the rod and the tip of the rod to fall behind the body, but you should also mention the front of the body as soon as possible.

2. The position of the point stick is usually on the inner snowboard of the turning, and the front side of the front part of the fixed device.

3. The power of the point stick comes from the forearm and the wrist. Do not use the arm of the arm, similar to the feeling of nailing with a hammer.

4. When preparing a stick, the tip of the stick can be obliquely forward, but at the moment of the point of the point, the stick and the snow surface are vertical, so as to use the effect of the upper force and receive the effect of the point stick.

5. After ordering the stick, the hand cannot be removed back and down, and the direction of the operation should be basically the same as the outer direction of the upper body.

5. precautions for skiing sticks

1. In order to make the cunning snow stick support and not easily separate from the hand, you can drill a hole at the top of the pole or directly fix the previous long ring -shaped strip.Living, this part is called a grip, the ring -shaped strip is called the leather.

2. In order to overcome the difficulties that are too deep, inconvenient, or even unavailable in deep snow, you can install a snow wheel at 7-10 cm at the bottom of the pole.Deep, ensure the role of the snow stick.

3. In order to make the Ski stick still support the hard snow surface, it is necessary to install a metal tip in the lower end.

4. The pole body of the Ski stick should be used with a solid wooden rod or alloy aluminum Tube. It is better to use hollow bamboo rods. The diameter of the rod is 15-30 mm.

Disclaimer: The above method stems from the index of the program system or the sharing of netizens. It is for your reference only and does not represent the research perspective of this website. It proves that it is valid. Please pay attention to the authenticity and authority of the source of the content of the content.Apply to delete & gt; & gt; error correction & gt; & gt;

How to take a picture to take a picture is good -looking

1 To keep the banana body, you need to keep this posture from parachute out of the cabin to open the umbrella. Do not bow your head, otherwise you will not be able to take a face.

2 During the free fall, try not to open your mouth as much as possible. It is uncomfortable to pour the airflow into the mouth. It is not good to take a whole mouth. Of course, it is not good.

3 Handle / / Back / / Writing in the arm is simple and rude, just remember to use an oily marker pen, otherwise it will not look good if it is spent.

4 , During the free landing, the posture of the camera is mad, and I really do nt know what to do, then swing your hands V words, vertical thumbs, better heart, etc. If you discuss the ditch with the coach in advance, the same action is also very filming.

5 Do nt forget to take a photo on the ground. After many umbrella friends go to the ground, they go to the waiting room to get a certificate. Remember to take a photo with the coach after the fall to commemorate this special moment.

What clothes to wear for skydiving, good -looking photos

1 Under the combination of blue sky and white clouds, do not choose the color of the clothes that are similar to the color of the sky. There must be contrast between contrast in color. The most red clothing is the main.Because the red picture is strong, the photos taken are beautiful; red is eye -catching, and high -altitude skydiving has too much uncertainty. The dazzling color can at least ensure that it is accurately captured in the shaking lens.

2 The skydiving has requirements for clothing. The top must be wrapped in the shoulders. Do not be too short. You cannot wear skirts and shorts in the lower clothes. pants must be over the knee. shoes must not have heels or sandals.To put it simply, it is recommended that everyone sportswear plus flat sports shoes, safety first.

3 In terms of makeup, I advise everyone to try their best to make a beautiful makeup. Maybe this will be the only one in your life. It must be beautiful.

4 Pay attention to work on the hair up and down. Girls with long hair are best to tie their hair, because the wind is large, it is easy to appear that your hair is blown everywhere. You can make your brain on your own.

Skydiving hand holding is good or third -party shooting

1 Handheld shooting

The handheld shooting index is that the professional double umbrella coach with a parachute takes you, binds through the handgopro sports cameras, when you board the plane, the plane rises, jump out of the cabin, fall quickly, open the main umbrella, and settle, shoot you to shoot. The shooting angle is similar to a selfie. It can take a close -up of your real response when you parachute, record each detail of you, and become your precious memory.

2 , Third -party shooting

In addition to you and your double umbrella coach, we will also equip a coach to give you a separate shooting service. Third -party coaches will top top gopro Sport camera, do you 360 The third -party perspective of the degree has more shooting perspectives and a wider range of shooting.At the most subversive moment in your life, through a third -party camera, you will be able to set it perfectly and become your high time!

As for that kind of shooting method is better, it depends on which kind of shooting method personally likes.

1. Strong light probe Lights do not light up for maintenance method

Detective Lights are a very easy -to -use Tool when traveling outdoors. It can be manipulated or worn on the head to provide long -range lighting effects. However, sometimes due to the quality of the detection Lights or improper use, the probation Lights fail.In the case, how can I repair the strong light probe?

The structure of the probe lamp is relatively simple, including a switch, the battery placement position and the lamp head of the back of the rear. During maintenance, we can use a small cross screw knife to check the fault one by one and repair:

1. First of all, see if it is a switch or where the contact is poor. If the switch is pressed repeatedly, there is no shiny trace of the lamp beads, which means that it is not a problem of poor contact.

2. Open the battery placement in the back, change the battery, see if it is the problem of the battery or there is no charging.

3. After excluding the above reasons, the rest is the failure caused by the internal line. This needs to be removed and repaired. The specific method is to hold the light head in the right hand, rotate the lamp head in the counterThe connection point of the circuit and the circuit board of the light line and the light head, if it is intact, exclude the possibility of some lines of the lamp head; if there is a problem, connect the line, and the specific method isCome down, expose a long section of metal wire, and wrap the metal wire to the disconnected battery base metal piece, and tighten it.

4. Then put the lamp head back, insert the cross screw knife to the place where the lamp head and the rear part are connected, hold the other end of the screw, rotate the cross screw knife against the right hand, you can twist the screws.Part of the stuck place separate, and then use a screwdriver to remove the two screws of the battery installation position. See if the line between the metal sheet of the battery base and the lamp head is broken. If it is broken, the maintenance method is the same as the step 3.

Tips:When disassembling the battery base, gently separate to prevent too much force from the wire head and the wire between the battery directly. After the line is connected, do not rush to load it back. Try the fault to eliminate it.

2. What are the precautions for the use of the viewing light?

The use of the exploration Lights is limited. In order to facilitate use and avoid failure, we must pay attention to maintaining and maintained strong light probe Lights during use:

1. In the case of long -term use, it must be charged once every three months to keep the internal current Running.

2. Although the probe light has certain protection performance, after all, it is an electronic product. Usually use it away from the water source to prevent short circuit circuit.

3. Do not frequently press the switch when using the probe light to prevent the lamp beads from being broken.

4. Do not wait until the electricity is completed after the electricity is used to avoid loss.

What are the functions of a car umbrella?

1. sunscreen and insulation

Sun protection and insulation is the most basic function. After all, the original intention of buying a car Parasol is to prevent the car from being exposed.The Parasol is mainly protected by car paint, and at the same time blocked the damage of ultraviolet rays to the interior of the car. It can also avoid the rising temperature of the car in direct sunlight, so that we can be more comfortable when we use the car next time.

2. Rain prevention

The car umbrella can not only allow us to use it in a sunny day, that is, we can also use it in severe weather, especially nowadays in the rainy season. If we don't want the car to be rained, we can protect the car before the rain.Not only can our cars be protected, but it also avoids the destruction of car paint on the wind.

3. Dust -proof bird dung

When there are more windy weather, there are naturally more dust. Although the dust cannot be corroded to our car, there will be more dust.The car paint will definitely have an impact, and many riders will stop the car under the tree in order not to let the car expose, but when we drive, we will find that there are many bird dung on the car. Bird dung will have the car paintWith corrosive, with a car Parasol, these problems can be solved.

4. Fireworks and firecrackers damage

The car is parked at the door of the hotel. Fireworks and firecrackers are often encountered. Fireworks in burning often fall on the car. Use fire -resistant materials to prevent the drops of fireworks and firecrackers damage to the body.

How to choose the right car sun umbrella

1. Look at the appearance

Although the appearance of the car umbrella does not affect our use, a more satisfied appearance of ourselves is also familiar when we use. If the appearance is not good, we are afraid of not so much confidence.

2. Look at the umbrella surface

The umbrella surface and appearance of the Parasol are very different concepts. When choosing an umbrella surface, we must choose the kind of glossy umbrella surface. Such an umbrella surface is not only effective, but also has a certain amount of obstruction of ultraviolet rays.The role, of course, has also improved a certain improvement in the aesthetic perspective.

3, umbrella Bone

The umbrella Bone of the Parasol cannot be ignored. The umbrella Bone determines the storage of the Parasol.Life life is reduced.

4. Look at wind resistance

Skeleton umbrella resistance is relatively weak than that of round umbrellas and folding umbrellas. It is recommended that consumers choose products with good wind resistance.

5. Look at the brand

The quality of the product of large brands is often guaranteed, after -sales service is good, the production process technology is mature, the price is also reasonable, and the national supervision is relatively strict. Consumers can buy the appropriate car sun umbrella according to their actual needs.

[Smooth Clover] The advantages of the role of Shading on the roof

When it comes to shutters, it is easy to think of high -tech buildings exposed to structures, mechanical and electrical parts, and talk about the relationship between architecture and structure.The louver is expanded in a horizontal way, and the level of the louver group is expanded: the facade factor of the building constitutes a pure horizontal line.The staggered arrangement of the Closs Group: There are such louver layout in residential and public construction.Make the facade lively and angry.The vertical expansion of the shutter group: The louver group is unfolded in the vertical direction to form a tall vertical line.

According to the requirements of different environments, sunshade louver is used to limit the effects of direct radiation, scattered radiation, and environmental surface reflection radiation on indoor temperature and light through the design of different environments.

The shutters are relatively wide, which are generally used for indoor and Outdoor Shading and ventilation.Now more and more people's recognition of the shutters have also evolved from the shutters.Blossom curtain wall has many functions, and it is very beautiful. It is generally used in high -rise buildings.The Shading louver curtain has good ventilation and ventilation and breathable indoor light intensity, especially suitable for simple and bright indoor space.Plastic aluminum shutters are favored by consumers because they are not easy to fade, do not deform, and have good thermal insulation.

The advantage of the new type of Shading louver is that when the shaft is rotated, the rotation of the flip wheel fixed on it, thereby driving the leaves of the louver window to rotate. Because the turning wheel is limited by the two directions of the base, the leaves of the louver window are not rotated after rotating in place to avoidThe leaves are over -turned over.The structure of the entire blade flip mechanism is simple and easy to make.

The characteristics and advantages of the roof Shading of louver

The roof Shading louver is mainly used for regulating the sun, and it is a very important decorative component on the top of the building.Blossoms are on the top: Blossom as a form of roof.The roof is pretty better.

When it comes to shutter, it is easy to think of those high -tech buildings that expose the structure, mechanical and electrical parts, and talk about the relationship between architecture and structure.The louver is expanded in a horizontal way, and the level of the louver group is expanded: the facade factor of the building constitutes a pure horizontal line.The staggered arrangement of the Closs Group: There are such louver layout in residential and public construction.Make the facade lively and angry.The vertical expansion of the shutter group: The louver group is unfolded in the vertical direction to form a tall vertical line.

According to the requirements of different environments, sunshade louver is used to limit the effects of direct radiation, scattered radiation, and environmental surface reflection radiation on indoor temperature and light through the design of different environments.

The shutters are relatively wide, which are generally used for indoor and Outdoor Shading and ventilation.Now more and more people's recognition of the shutters have also evolved from the shutters.Blossom curtain wall has many functions, and it is very beautiful. It is generally used in high -rise buildings.The Shading louver curtain has good ventilation and ventilation and breathable indoor light intensity, especially suitable for simple and bright indoor space.Plastic aluminum shutters are favored by consumers because they are not easy to fade, do not deform, and have good thermal insulation.

The advantage of the new type of Shading louver is that when the shaft is rotated, the rotation of the flip wheel fixed on it, thereby driving the leaves of the louver window to rotate. Because the turning wheel is limited by the two directions of the base, the leaves of the louver window are not rotated after rotating in place to avoidThe leaves are over -turned over.The structure of the entire blade flip mechanism is simple and easy to make.

The role of the roof Shading louver:

1. Shading, lighting, Shading and energy, cooling, energy saving, environmental protection.

2. Comfortability: comfortable body sensation, comfortable temperature, visual comfort, adaptation comfort; decorative; privacy; protective effect on the surface of the building.

Character characteristics:

1. Good rotation light and visual enjoyment of modern flow sense;

2. The surface of the blades is bright, the edge is designed, and the Shading rate is as high as 98%;

3. Wide moisture -proof is not moldy and can be placed in a humid environment;

4. Made of anti -UV material, indoor energy conservation is more effective;

5. Do not contain formaldehyde, waterproof and insulation, do not help, do not refund, and do not deform heat resistance.

Advantages of roof Shading louver:

1. Outside the building shade function: Ventilation shutters can be effectively deducted from the sunlight of the sunlight to indoor radiation energy, which can achieve the effect of reducing room temperature in summer.At the same time, the intensity is good and it is not easy to be destroyed.By adjusting the angle of the opening of ventilation shutters, the indoor can not only control the angle of light, but also increase security. The hidden effect is relatively good.

2. Large buildings high windows, large -scale exhaust: ventilation louver window configuration electric opening equipment can effectively solve the plant.It is difficult to open the window of the location, the requirements for ventilation.When all start (90 degrees) ventilation reaches 99%, excellent ventilation function: It can also be ventilated on rainy days.There is no need to consider the problem of raining or anti -theft after opening the window.Civilized Shading anti -theft, universal types of various places: smoke and ventilation of the plant.The external facades of the building, the setting of typhoons, and the improvement of ventilation settings, the school's protection settings can be through different settings of ventilated shutters.