Type of Flower pot rack

1. Hanging iron rack

iron flower racks can protect potted plants, which are not easy to break for potted plants; iron Flower stand can save space and play a better decorative effect; iron -style flower stands fashion trends can add beauty; most importantlyDanning to the sun.

2. Multi -layer Flower stand

At the corner of the house, placing a good corners of the corner can play a good decorative role, and it can make full use of the dead ends of the balcony to plant different plants according to the characteristics of the plant.Veimal vegetables and green plants on the balcony can be used for anticorrosive wood or iron corner flower racks that have been carried out.

3. folding Flower stand

The folding Flower stand is generally A -shaped design. The design of the A -shaped design not only makes it more stable, but also allows the potted plants on the Flower stand to get sufficient light and save space.The upper layer of this Flower stand can be placed in Xiyang, and plants that like semi -yin and half -yang are placed at the bottom layer, which is very practical.Different from ordinary flower stands, it can also prevent suspension of potted plants.

4. Multifunctional combination planting boxes

This combination of vegetable boxes can be combined according to your own needs, and can be combined with a single layer or a multi -layer combination.The structure of the upper and lower parts provides sufficient growth space for vegetables, and it is also very convenient to take care of it.

5. stools, tables

If the quality requirements for life are not so high, you can use a small bench and tablet to replace the Flower stand.Put the vegetable basin in a higher place to make it more fully accepting the sun, and it will also make the balcony more three -dimensional.In order to prevent moisture, it can also cover the excessive sunshine in summer.

Flower Bashestand Shopping Tips

1There are different materials such as wood, iron, and root carving in the balcony Flower stand. Consumers can choose flower stands of different materials according to factors such as potted plants, indoor decoration and other factors.

2There are different specifications of balcony Flower pots. Consumers should be determined before purchasing.

3, Balcony Flower pot Flower House has two installation methods for mobile and wall -mounted balcony Flower pots. If you want to install it on the wall, you can choose a wall -mounted balcony flowerpot Flower stand. If it is placed on the balcony, you can choose a mobile typeBalcony Flower pot Flower stand.

4According to the spatial pattern: The size and specifications of the iron art stand are different. Before buying the product, it is recommended to determine the placement of the Flower stand and the size of the placement space, so as to choose the appropriate size iron Flower stand.

5According to the decoration style of the living room: Due to the many iron Flower stand shapes, you need to determine the decoration style of the living room before buying, and choose the Flower stand based on the decoration style to highlight the decoration effect of the living room.

precautions for buying in Flower pot rack

1We should pay attention to the people who put the Flower pots on the balcony. Long -term sunlight can make the white vine chair yellow and the brown vine chair faded.In addition, ultraviolet rays can also make green leaf ribbon vine, which will shorten life.If the room is not large, the desk is against the window.If the Flower pot is not large, it can be placed on the window sill.You can place some flowers of Xiyang.

2, Flower pots absorb a lot of water. When the water accumulates to a certain degree, the Flower pots will become soft and loose.

3We must pay attention to frequent ventilation, especially in the southern region with more rainfall.In addition, it is best to take care of the dry cloth after wiping the wet cloth. Of course, it can also be placed in a ventilated place, but avoid sunlight.

4In the end, although ordinary wood is low in price, durability is poor.Because flower racks and Flower pots are usually outdoors, anticorrosive wood has the characteristics of good anticorrosion, insect -proof, and waterproofing. The anticorrosive wooden flower raw Flower pot not only has simple appearance and natural appearance, but also makes up for the shortcomings of the poor durability of ordinary wood.

Recommended reading

[home tools] What are the daily tools of family tools?

[Gardening Flower shovel] precautions for the purchase of the type of flower shovel

[Garden scissors] Pruning garden scissors have several types and uses of garden scissors

[Sprinkle Warling Booth] How to make the production diagram of the sprinkler sprinkler sprinkler sprinkler sprinkler sprinkler sprinkler

[Balcony vegetables] What are the wonderful use of hemp rope to grow vegetable rope

[Tendon Book] How to use the vegetable climbing of the vegetable climbing rack?

[Basin bottom net] What is the bottom of the Flower pot bottom pad?

[planting vegetables] What pots are used for balcony?

[Flower Basket shelf] How to choose a Flower pot rack balcony, how to choose the balcony, how to choose

one,tightsHow to wear

1. Stretch into the stove -legged socks in one hand, pinch the part of the pantyhose, and turn the pantyhose to pantyhose to the pantyhose.

2. Turn most of the socks, and Zhan Shun can easily reach into the pantyhose head.

3. The thumbs of both hands are supported on the inside of pantyhose, grabbed pantyhose four fingers, stretched the feet into the pantyhose, tightened the socks with both thumbs out of the thumb, and coordinated the four fingers and thumbs to pull the socks to the ankle, and put the connection.pants and pantyhose follow the right position.

4. Turn back the stress socks and pull it up. After wearing it, we can Smooth the socks.

2. How to divide tight pantyhose before and after

1. Under normal circumstances, in order to ensure the wear resistance of the soles of the feet, even pantyhose will attack the bottom of the feet and wrap it up to the toes.

2. If the socks are stepped on, you can distinguish the front and back according to the position of the foot.

3. Determine the opposite side according to the Trademark location of the socks.Under normal circumstances, the Trademark is on the back.

4. One side, one seam, and two seams on the other.

If the three seams are similar, because the hips are relatively large, adding a piece of cloth between the two gaps can enhance the comfort of wearing.Therefore, there are two seams on the opposite side, and one seam is positive.

5. There are also skinny leg stockings that are specifically lifted with hip lifting, which can be seen in the front and back more obvious.

Third, tight pantyhose and skinny legs are real?

Tight -fitting pantyhose is very "thin". It can shape Smooth leg lines and make the legs look more sexy. So can we wear this socks to make the muscles of the calves firmer?

In fact, tight socks cannot be thin.The principle of "thinness" of tight socks is to use small elastic materials to "squeeze" the leg muscles tightly to make the legs look thinner. In fact, fat is not reduced.And long -term wearing tight socks can also bring various problems, such as hindering blood circulation. In addition, some inferior chemical fiber pantyhose can easily cause urethral infections, which is very unfavorable to women!If the sisters wear tight stockings for 24 hours in a row, it is likely to cause poor breathing.Therefore, sisters should usually rely on exercise and let the calf lose weight, likejump rope, swimming and other movements are excellent, not to force the calf to lose weight by relying on "brute force".

1. Steps of the installation process of city circuit lamps

The city circuit lamp consists of the lamp head (light source), light pole, embedded parts, mixed soil foundation, lightning -absorbing corner iron, PVC Tube, wire, cable, control box (time and space switch, exchange contactor, leakage protection device) and other parts.The installation process steps are: basic positioning basic pouring construction cable protection groove slot slot threading pipe support threading cable protection groove backfill lamp wiring street light control installation:

1. Basic positioning

The survey address is determined to determine the position of the light pole. At the same time, there is no cable, pipeline and other facilities below the excavation location. Based on the above, the high -voltage wire must be avoided, and the leaves are used to avoid the safety of the leaves to ensure the safety of construction.

2. Basic pouring construction

Dig a basic pit with the corresponding size according to the drawings, then enter the lightning -absorbing angle iron, use the concrete to enter the cushion, and then fix the embedded parts; finally put two in less than less than 30mm arc -shaped threading Tube, the threading Tube of the threading Tube, and the threading Tube.One end is placed in the center of the four screws of the embedded parts, one of which comes in in the direction of the main cable, and the other one ends in the direction of the main cable.

3. Cable protection groove slot

In the case of cement pavement or street road surface, a cable protective groove should be dug into the cement slot. The depth of the slot should be determined according to the actual situation.

4. Circuit Tube supplement

The thread is generally used for cables. One end is fixed on the guidance steel wire. The piercing rod is introduced. On the basis of embedding, there is -shaped semi -circular, which is used for wiring.The length of each round line is determined.

5. Cable protection groove recovery

The hidden project can be filled in the cable protection groove after confirming the qualification, and the layered landfilling when the backfill is returned.

6. lighting assembly

Divide the light rod to each foundation, and assemble the light rod arm on the side of the road parallel. Do not scrape the wire in the light rod during the thread to protect the cortex;Adjust the parallel degree of the light surface and the parallel surface of the light head and the elevation of the light head, and try the temporary power supply.

7. Establishing rod wiring

The vertical rod is divided into two types: artificial vertical rod and mechanical vertical rod. Pay attention not to press the French disk to the wire and cable to prevent the leakage of the Skin.Do not touch the surrounding high -voltage lines or other buildings when standing.Add the cushion under the buried nut and use nuts to fasten.Effect the light rod, the light pole must be perpendicular to the road surface.Then faste the pads of the lightning -absorbing angle iron, and the conditions are allowed to be welded to ensure that the light rod is connected to the pile with the lightning corner.Do a good job of connection between the main cable and the wire in the light rod, and do a good job of waterproof treatment. The phase wire of each lamp should be installed with a fuse. The fuse should be fixed., The upper end of the fuse should be connected to the wire, the lower end is connected to the power supply, and the lamp rod is connected to the ground wire at the same time.

8. Street light control installation

Street light control box components include leakage protection, timing microcomputer switches, AC contactors, separation switches, and electric meters. Check whether the connection is correct and whether the wiring is firm., Finally connect to the distribution box to connect the ground wire.

After the above steps, the rust -proof processing of the street light rod can be embedded in the street light rod. If the conditions are conditional, add an additional nut fastener. After the liquid asphalt is brushed, the city circuit light is installed.

2. What are the requirements for Outdoor street lights?

1. The protection of Outdoor street lights is divided into TT and TN systems, of which the TN system is divided into TN-C, TN-S, TN-C-S system.

2. The TT method refers to the protection system that directly grounds the metal shell of the street lamp steel rod, commonly known as single Lights.When the metal shell of the street -lamp steel rod is charged, the danger of electric shock is reduced by a low -voltage section. It is suitable for places where ground protection is very scattered. At present, it is rarely used.

3. The TN method of power supply system is the protection system that connects the metal shell of the street light steel rod with the working zero line. It is also known as the zero protection system of the street light connection. Once the device appears, the zero protection system can raise the leakage current to a short -circuit current to a short -circuit current.This current is very large, which is 5.3 times the TT system. In fact, it is a relatively short -circuit failure. The fuse of the fuse will melt.Safety.

4. The welding of the ground wire should comply with relevant regulations: flat steel is twice the width of its width, and at least 3 edges are welded. The round steel is 6 times the diameter. When the round steel is connected to the flat steel, the length of the round steel is round steel.6 times diameter.

Disclaimer: The above method stems from the index of the program system or the sharing of netizens. It is for your reference only and does not represent the research perspective of this website. It proves that it is effective. Please pay attention to the authenticity and authority of the source of the content of the content.Apply to delete & gt; & gt;Correction & gt; & gt;

1. The breeding method and precautions of the emperor flower

1. Soil The planting soil of the emperor flower requires good drainage performance, especially the seedlings.If the pot is tied, the seedlings are difficult to grow.The sandy soil is the most suitable for the growth of the emperor.In family breeding, Flower pots should also choose a slightly larger breathability pottery pot.

2. Temperature The temperature of the emperor's flowers is generally not less than 7 degrees Celsius, and the temperature in summer should be 27 degrees Celsius.Individual varieties can resist low temperature, and zero -degrees Celsius will not frostbite.

3. Light The emperor's flowers like the sun.It can be maintained at all sun.But in the summer, it needs to be cool and dry, and it needs to be appropriately shaded in the scorching sun.

4. Watering The emperor flower likes to dry the environment. Watering can be appropriate, and there is no need to keep the pot soil moist.However, pay attention to the adjustment of the humidity of the air to spray water mist around the plant.

5. Fertilization The emperor flowers are not very high in nutrients. Each Fertilizer can meet the growth requirements once each spring and autumn.

2. How to plant the emperor flowers

1. planting time First of all, you need to choose the appropriate time. The emperor's sowing time is more about the autumn October. At this time, the seeds are just picked, and the germination power is relatively strong.And at this time, the temperature and humidity are more suitable, and the seed germination rate can be increased after planting.

2. seed treatment The seeds of the emperor flowers are difficult to pick them. The petals need to be placed in the sun and dried, and then picked the mature seeds with their hands.After that, you can soak in warm water for 3 to 5 hours, and you can remove it and use high -lipid film for planting to avoid the breeding of bacteria.

3. Soil preparation The emperor flower likes to grow in the soil with strong breathability and good drainage, so you can choose to prepare humus soil and river sand according to a 1: 1 ratio.You can add an appropriate amount of rot bark and base Fertilizer to give the seeds enough nutrients, which will shorten the time for seed germination.

4. Sowing and maintenance Place the seeds of the emperor flower in the soil, covering 3 cm thick soil, and sowing about 3 seeds in a Flower pot.After the sowing is completed, watering is required. There is no need to water again during germination. When the emperor flowers grow out of the real leaves, you can water the second water and move into the astigmatism environment.

3. How to cut the emperor flowers

1. Choose the branches above the semi -wooden position of the emperor Hua Mother.

2. The matrix uses peat and perlite to mix with a volume ratio of 4: 6, adjust the pH value of 5.5 ~ 6.5, and the EC value is less than 0.5.

3. Immerse the cutting base of the cuttic acid solution of 1000 ppm, soak it for 15 minutes and air dry immediately.

4. The depth of cutting is 1/3 ~ 1/4 of the length of the cuttings.After cutting, manages according to conventional technology, and field transplant is transplanted after the seedlings are out of seedlings.

What isHigh fork Swimsuit

The high fork swimwear is a high -cut Swimsuit, especially the high fork conjoined Swimsuit and the high -cut split (bikini) Swimming trunks.It is generally a female Swimsuit.The Swimsuit style is unique and suitable for those with short legs. This can cause people to have an illusion, and the legs look more slender.Perfect women will look fashionable and sexy.

How to choose a high fork Swimsuit

Body purchase

1. Thin women

To emphasize the lines of the body with clear colors, avoid wearing a dark Swimsuit, it is best to wear a Swimsuit with pattern patterns in the whole body, so that people's eyes are attracted by those patterns.You should avoid choosing a Swimsuit without straps.

2, obese women

It will not look Slim because of wearing a tight Swimsuit. On the contrary, too tightness will expose the shortcomings of the body.Young and obese women can choose a colorful Swimsuit with vertical stripes to display bodybuilding and youthful vitality. Do not have three points on the style. It is more appropriate to choose a "backless" Swimsuit.

3. Girls in primary and secondary schools

The Swimsuit should be bright and eye -catching, showing girls' bodybuilding and lively.If you have a small chest, you should wear a horizontal pattern or a fold Swimsuit. Those with thicker legs choose a Swimsuit with black -frame patterns on the side of the legs, which can make the legs feel long.

4. Those with large breasts

You can choose a Swimsuit with diagonal pattern or a large print pattern, which can move people's attention from the upper chest to achieve the effect of covering.When the abdomen is rising into a pear -shaped shape, you can choose a three -color Swimsuit, the color on the waist is cross -matched, and the lower waist is dark to cover up the bulging abdomen.

Quality purchase

When you buy a Swimsuit, you can touch it by hand, or the composition content of the reference material to see what the material is.Good Swimsuit fabrics are soft and elastic. The pattern of the fabric is relatively dense. The cut is exquisite. The sewing uses elastic lines, which will not be broken due to exercise.During the trial, it is too much easy to go with the principle of fit and comfort.

1. Fabric and structure

It is best to choose elastic fabrics with a vertical content of more than 15%, so that the Swimsuit can be spoiled and contracted with the body; swimming in the swimming pool, pay attention to the adaptation of the chloride molecular content in the pool in the pool.The swimwear made of fabrics is most suitable for low temperature or swimming.Because this kind of fabric is more hollow, it is easy to maintain body temperature.Try to buy less or not buy the so -called "spandex high bomb fabric" as much as possible.One is that the amphana content of clothing fabrics is generally about 15%-20%. The second is that the imitation fabric is extremely poor due to the variation of components.

2. Workman and safety

Because swimwear is a practical clothing and strong stretching force, it is best not to choose a style with more stitching.When the amount of exercise is large, it is easy to open from the splicing place.At the seams, the three stitches and five -line needles are basic, and the three stitches and six lines are the most firm.The elasticity of the line should be consistent with the stretching of the fabric.The beach series is best selected with pleated threads, which is beautiful and stretching has stronger elasticity.

3. Hygiene

The surface layer of the silk cotton Swimsuit has the advantages of chemical fiber fabrics. It is made of pure cotton in the inner layer, which is not irritating to the Skin, and is especially suitable for those with allergies to the Skin.The crotch of the Swimsuit should have a lining, and the Swimsuit has a longer life.Use it after washing.

Disclaimer: The above content is derived from the provision of the program system index or the sharing of netizens. It is for your reference only and does not represent the research perspective of this website. Please pay attention to the authenticity and authority of the source of the content of the content.Apply to delete & gt; & gt; error correction & gt; & gt;